[dpdk-users] bnx2x_attn_int_deasserted2() -- HW block attention set2 13:

[dpdk-users] bnx2x_attn_int_deasserted2() -- HW block attention set2 13:

[Saurabh Mishra]

Is there any fix available for bnx2x dpdk driver showing following error:

bnx2x_attn_int_deasserted2 -- HW block attention set2 13:


EAL: Requesting 1024 pages of size 2MB from socket 0

EAL: TSC frequency is ~1799997 KHz

EAL: Master lcore 1 is ready (tid=f7fe78c0;cpuset=[1])

EAL: PCI device 0000:03:00.0 on NUMA socket 0

EAL:   probe driver: 15ad:7b0 rte_vmxnet3_pmd

EAL:   Not managed by a supported kernel driver, skipped

EAL: PCI device 0000:0b:00.0 on NUMA socket 0

EAL:   probe driver: 14e4:168e rte_bnx2x_pmd

EAL:   PCI memory mapped at 0x7fff713f3000

EAL:   PCI memory mapped at 0x7fff70bf3000

EAL:   PCI memory mapped at 0x7ffff7fa2000

EAL: PCI device 0000:0b:00.1 on NUMA socket 0

EAL:   probe driver: 14e4:168e rte_bnx2x_pmd

EAL:   PCI memory mapped at 0x7fff703f3000

EAL:   PCI memory mapped at 0x7fff6fbf3000

EAL:   PCI memory mapped at 0x7ffff7f92000

pan_dpdk_init() mbuf_pool address is --  (nil)

core_id:1, Successfully mmap dpdk pktmbuf_pool :0x7fffe2e7dec0

Total number of dpdk interface 2

Max queue size for port:0 - Rx queue:128, Tx queue:128

PMD: bnx2x_dev_rx_queue_setup(): fp[00] req_bd=1024, thresh=0,
usable_bd=2040, total_bd=2048, rx_pages=4, cq_pages=32

PMD: bnx2x_dev_tx_queue_setup(): fp[00] req_bd=1024, thresh=512,
usable_bd=2040, total_bd=2048, tx_pages=8

PANIC in bnx2x_attn_int_deasserted2():

HW block attention set213: [xyz() [0x402b11]]