Re: ConnectX5 Setup with DPDK

[Aaron Lee <acl049@ucsd.edu>]

[-- Attachment #1: Type: text/plain, Size: 7988 bytes --]

Hi Thomas,

I tried installing things from scratch two days ago and have gotten
things working! I think part of the problem was figuring out the correct
hugepage allocation for my system. If I recall correctly, I tried setting
up my system with default page size 1G but perhaps didn't have enough pages
allocated at the time. Currently have the following which gives me the
output you've shown previously.

root@yeti-04:~/dpdk-21.11# usertools/dpdk-hugepages.py -s
Node Pages Size Total
0    16    1Gb    16Gb
1    16    1Gb    16Gb

root@yeti-04:~/dpdk-21.11# echo show port summary all |
build/app/dpdk-testpmd --in-memory -- -i
EAL: Detected CPU lcores: 80
EAL: Detected NUMA nodes: 2
EAL: Detected static linkage of DPDK
EAL: Selected IOVA mode 'PA'
EAL: No free 2048 kB hugepages reported on node 0
EAL: No free 2048 kB hugepages reported on node 1
EAL: No available 2048 kB hugepages reported
EAL: VFIO support initialized
EAL: Probe PCI driver: mlx5_pci (15b3:1017) device: 0000:af:00.0 (socket 1)
TELEMETRY: No legacy callbacks, legacy socket not created
Interactive-mode selected
testpmd: create a new mbuf pool <mb_pool_0>: n=779456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
testpmd: create a new mbuf pool <mb_pool_1>: n=779456, size=2176, socket=1
testpmd: preferred mempool ops selected: ring_mp_mc

Warning! port-topology=paired and odd forward ports number, the last port
will pair with itself.

Configuring Port 0 (socket 1)
Port 0: EC:0D:9A:68:21:A8
Checking link statuses...
Done
testpmd> show port summary all
Number of available ports: 1
Port MAC Address       Name         Driver         Status   Link
0    EC:0D:9A:68:21:A8 0000:af:00.0 mlx5_pci       up       100 Gbps

Best,
Aaron

On Mon, Feb 21, 2022 at 11:03 AM Thomas Monjalon <thomas@monjalon.net>
wrote:

> 21/02/2022 19:52, Thomas Monjalon:
> > 18/02/2022 22:12, Aaron Lee:
> > > Hello,
> > >
> > > I'm trying to get my ConnectX5 NIC working with DPDK v21.11 but I'm
> > > wondering if the card I have simply isn't compatible. I first noticed
> that
> > > the model I was given is MCX515A-CCA_Ax_Bx. Below are some of the error
> > > logs when running dpdk-pdump.
> >
> > When testing a NIC, it is more convenient to use dpdk-testpmd.
> >
> > > EAL: Detected CPU lcores: 80
> > > EAL: Detected NUMA nodes: 2
> > > EAL: Detected static linkage of DPDK
> > > EAL: Multi-process socket
> /var/run/dpdk/rte/mp_socket_383403_1ac7441297c92
> > > EAL: failed to send to (/var/run/dpdk/rte/mp_socket) due to No such
> file or
> > > directory
> > > EAL: Fail to send request /var/run/dpdk/rte/mp_socket:bus_vdev_mp
> > > vdev_scan(): Failed to request vdev from primary
> > > EAL: Selected IOVA mode 'PA'
> > > EAL: failed to send to (/var/run/dpdk/rte/mp_socket) due to No such
> file or
> > > directory
> > > EAL: Fail to send request /var/run/dpdk/rte/mp_socket:eal_vfio_mp_sync
> > > EAL: Cannot request default VFIO container fd
> > > EAL: VFIO support could not be initialized
> > > EAL: Probe PCI driver: mlx5_pci (15b3:1017) device: 0000:af:00.0
> (socket 1)
> > > EAL: failed to send to (/var/run/dpdk/rte/mp_socket) due to No such
> file or
> > > directory
> > > EAL: Fail to send request /var/run/dpdk/rte/mp_socket:common_mlx5_mp
> > > mlx5_common: port 0 request to primary process failed
> > > mlx5_net: probe of PCI device 0000:af:00.0 aborted after encountering
> an
> > > error: No such file or directory
> > > mlx5_common: Failed to load driver mlx5_eth
> > > EAL: Requested device 0000:af:00.0 cannot be used
> > > EAL: Error - exiting with code: 1
> > >   Cause: No Ethernet ports - bye
> >
> > From this log, we miss the previous steps before running the application.
> >
> > Please check these simple steps:
> > - install rdma-core
> > - build dpdk (meson build && ninja -C build)
> > - reserve hugepages (usertools/dpdk-hugepages.py -r 1G)
> > - run testpmd (echo show port summary all | build/app/dpdk-testpmd
> --in-memory -- -i)
> >
> > EAL: Detected CPU lcores: 10
> > EAL: Detected NUMA nodes: 1
> > EAL: Detected static linkage of DPDK
> > EAL: Selected IOVA mode 'PA'
> > EAL: Probe PCI driver: mlx5_pci (15b3:101f) device: 0000:08:00.0 (socket
> 0)
> > Interactive-mode selected
> > testpmd: create a new mbuf pool <mb_pool_0>: n=219456, size=2176,
> socket=0
> > testpmd: preferred mempool ops selected: ring_mp_mc
> > Configuring Port 0 (socket 0)
> > Port 0: 0C:42:A1:D6:E0:00
> > Checking link statuses...
> > Done
> > testpmd> show port summary all
> > Number of available ports: 1
> > Port MAC Address       Name         Driver         Status   Link
> > 0    0C:42:A1:D6:E0:00 08:00.0      mlx5_pci       up       25 Gbps
> >
> > > I noticed that the pci id of the card I was given is 15b3:1017 as
> below.
> > > This sort of indicates to me that the PMD driver isn't supported on
> this
> > > card.
> >
> > This card is well supported and even officially tested with DPDK 21.11,
> > as you can see in the release notes:
> >
> https://urldefense.proofpoint.com/v2/url?u=https-3A__doc.dpdk.org_guides_rel-5Fnotes_release-5F21-5F11.html-23tested-2Dplatforms&d=DwICAg&c=-35OiAkTchMrZOngvJPOeA&r=hV5L_ta1W9AMUIlRhnTmeA&m=Sjlw2sMlSxVzIY1zsNBhZueu7hv1__H7yXdaC5vzGYswqkAc_F9-SOmlhbM-J6yO&s=ioqgYPqVWdF2XE0iOZ4AZn5Vw_NGmtr5m9fYCf_TY9A&e=
> >
> > > af:00.0 Ethernet controller [0200]: Mellanox Technologies MT27800
> Family
> > > [ConnectX-5] [15b3:1017]
> > >
> > > I'd appreciate it if someone has gotten this card to work with DPDK to
> > > point me in the right direction or if my suspicions were correct that
> this
> > > card doesn't work with the PMD.
>
> If you want to check which hardware is supported by a PMD,
> you can use this command:
>
> usertools/dpdk-pmdinfo.py build/drivers/librte_net_mlx5.so
> PMD NAME: mlx5_eth
> PMD KMOD DEPENDENCIES: * ib_uverbs & mlx5_core & mlx5_ib
> PMD HW SUPPORT:
>  Mellanox Technologies (15b3) : MT27700 Family [ConnectX-4] (1013) (All
> Subdevices)
>  Mellanox Technologies (15b3) : MT27700 Family [ConnectX-4 Virtual
> Function] (1014) (All Subdevices)
>  Mellanox Technologies (15b3) : MT27710 Family [ConnectX-4 Lx] (1015) (All
> Subdevices)
>  Mellanox Technologies (15b3) : MT27710 Family [ConnectX-4 Lx Virtual
> Function] (1016) (All Subdevices)
>  Mellanox Technologies (15b3) : MT27800 Family [ConnectX-5] (1017) (All
> Subdevices)
>  Mellanox Technologies (15b3) : MT27800 Family [ConnectX-5 Virtual
> Function] (1018) (All Subdevices)
>  Mellanox Technologies (15b3) : MT28800 Family [ConnectX-5 Ex] (1019) (All
> Subdevices)
>  Mellanox Technologies (15b3) : MT28800 Family [ConnectX-5 Ex Virtual
> Function] (101a) (All Subdevices)
>  Mellanox Technologies (15b3) : MT416842 BlueField integrated ConnectX-5
> network controller (a2d2) (All Subdevices)
>  Mellanox Technologies (15b3) : MT416842 BlueField multicore SoC family VF
> (a2d3) (All Subdevices)
>  Mellanox Technologies (15b3) : MT28908 Family [ConnectX-6] (101b) (All
> Subdevices)
>  Mellanox Technologies (15b3) : MT28908 Family [ConnectX-6 Virtual
> Function] (101c) (All Subdevices)
>  Mellanox Technologies (15b3) : MT2892 Family [ConnectX-6 Dx] (101d) (All
> Subdevices)
>  Mellanox Technologies (15b3) : ConnectX Family mlx5Gen Virtual Function
> (101e) (All Subdevices)
>  Mellanox Technologies (15b3) : MT42822 BlueField-2 integrated ConnectX-6
> Dx network controller (a2d6) (All Subdevices)
>  Mellanox Technologies (15b3) : MT2894 Family [ConnectX-6 Lx] (101f) (All
> Subdevices)
>  Mellanox Technologies (15b3) : MT2910 Family [ConnectX-7] (1021) (All
> Subdevices)
>  Mellanox Technologies (15b3) : MT43244 BlueField-3 integrated ConnectX-7
> network controller (a2dc) (All Subdevices)
>
> > Please tell me what drove you into the wrong direction,
> > because I really would like to improve the documentation & tools.
>
>
>
>

[-- Attachment #2: Type: text/html, Size: 9524 bytes --]