* [dpdk-users] qat is not working with dpdk
@ 2021-03-04 6:11 Anjum, Sohail
2021-03-04 6:14 ` Anjum, Sohail
0 siblings, 1 reply; 3+ messages in thread
From: Anjum, Sohail @ 2021-03-04 6:11 UTC (permalink / raw)
To: users
Hello everyone I am trying to run dpdk-test-crypto-perf with sha1-hmac and
sha2-256-hamc.
But whenever I run this command I get this error message and I don't know
how to solve this problem. Need your suggestions. I don't have any idea how
to initialise a crypto device. However I already have qat installed in my
Pc and service is in the start mode.
--
*Regards*,
*Sohail Anjum*
*EECS Department.*
*National Chiao Tung University, Hsinchu, Taiwan*
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dpdk-users] qat is not working with dpdk
2021-03-04 6:11 [dpdk-users] qat is not working with dpdk Anjum, Sohail
@ 2021-03-04 6:14 ` Anjum, Sohail
2021-03-04 7:38 ` Kusztal, ArkadiuszX
0 siblings, 1 reply; 3+ messages in thread
From: Anjum, Sohail @ 2021-03-04 6:14 UTC (permalink / raw)
To: users
Hello everyone I am trying to run dpdk-test-crypto-perf with sha1-hmac and
sha2-256-hamc.
But whenever I run this command
{./x86_64-native-linuxapp-gcc/build/app/test-crypto-perf/dpdk-test-cryptoperf
--socket-mem 2048,0 --legacy-mem -w 0000:02:01.0 -w 0000:02:01.1 -w
0000:02:01.2 -w 0000:02:01.3 -l 4,5,13,6,14 -n 4 -- --buffer-sz
64,128,256,512,1024,2048 --optype cipher-then-auth --ptest throughput
-auth-key-sz 64 --cipher-key-sz 16 --devtype* crypto_qat* --cipher-iv-sz 16
-
-auth-op generate --burst-sz 32 --total-ops 30000000 --silent --digest-sz
20 --auth-algo sha1-hmac --cipher-algo aes-cbc --cipher-op encrypt }
I get this error message()USER1 Failed to initialise requested crypto
device type) and I don't know how to solve this problem. Need your
suggestions. I don't have any idea how to initialise a crypto device.
However I already have qat installed in my Pc and service is in the start
mode.
On Thu, Mar 4, 2021 at 2:11 PM Anjum, Sohail <sohail.eic06g@nctu.edu.tw>
wrote:
>
> Hello everyone I am trying to run dpdk-test-crypto-perf with sha1-hmac and
> sha2-256-hamc.
>
> But whenever I run this command I get this error message and I don't know
> how to solve this problem. Need your suggestions. I don't have any idea how
> to initialise a crypto device. However I already have qat installed in my
> Pc and service is in the start mode.
>
> --
> *Regards*,
>
> *Sohail Anjum*
>
> *EECS Department.*
> *National Chiao Tung University, Hsinchu, Taiwan*
>
>
--
*Regards*,
*Sohail Anjum*
*EECS Department.*
*National Chiao Tung University, Hsinchu, Taiwan*
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dpdk-users] qat is not working with dpdk
2021-03-04 6:14 ` Anjum, Sohail
@ 2021-03-04 7:38 ` Kusztal, ArkadiuszX
0 siblings, 0 replies; 3+ messages in thread
From: Kusztal, ArkadiuszX @ 2021-03-04 7:38 UTC (permalink / raw)
To: Anjum, Sohail, users
> -----Original Message-----
> From: users <users-bounces@dpdk.org> On Behalf Of Anjum, Sohail
> Sent: Thursday, March 4, 2021 7:15 AM
> To: users@dpdk.org
> Subject: Re: [dpdk-users] qat is not working with dpdk
>
> Hello everyone I am trying to run dpdk-test-crypto-perf with sha1-hmac and
> sha2-256-hamc.
>
> But whenever I run this command
> {./x86_64-native-linuxapp-gcc/build/app/test-crypto-perf/dpdk-test-cryptoperf
> --socket-mem 2048,0 --legacy-mem -w 0000:02:01.0 -w 0000:02:01.1 -w
> 0000:02:01.2 -w 0000:02:01.3 -l 4,5,13,6,14 -n 4 -- --buffer-sz
> 64,128,256,512,1024,2048 --optype cipher-then-auth --ptest throughput -auth-
> key-sz 64 --cipher-key-sz 16 --devtype* crypto_qat* --cipher-iv-sz 16
> -
> -auth-op generate --burst-sz 32 --total-ops 30000000 --silent --digest-sz
> 20 --auth-algo sha1-hmac --cipher-algo aes-cbc --cipher-op encrypt } I get this
> error message()USER1 Failed to initialise requested crypto device type) and I
> don't know how to solve this problem. Need your suggestions. I don't have any
> idea how to initialise a crypto device.
> However I already have qat installed in my Pc and service is in the start mode.
>
> On Thu, Mar 4, 2021 at 2:11 PM Anjum, Sohail <sohail.eic06g@nctu.edu.tw>
> wrote:
>
> >
> > Hello everyone I am trying to run dpdk-test-crypto-perf with sha1-hmac
> > and sha2-256-hamc.
> >
> > But whenever I run this command I get this error message and I don't
> > know how to solve this problem. Need your suggestions. I don't have
> > any idea how to initialise a crypto device. However I already have qat
> > installed in my Pc and service is in the start mode.
Are all devices you have specified bound to vfio-pci (eventually igb-uio) according to "Bind to the vfio-pci driver" section in
Doc/guides/cryptodevs/qat.rst?
Do you see any additional informations like:
"Number of needed queue pairs is higher than the maximum number of queue pairs per device."
Or
"No crypto devices type crypto_qat available"?
It is usually shown over this line:
"# Crypto Performance Application Options:'"
> >
> > --
> > *Regards*,
> >
> > *Sohail Anjum*
> >
> > *EECS Department.*
> > *National Chiao Tung University, Hsinchu, Taiwan*
> >
> >
>
> --
> *Regards*,
>
> *Sohail Anjum*
>
> *EECS Department.*
> *National Chiao Tung University, Hsinchu, Taiwan*
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-03-04 7:38 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-04 6:11 [dpdk-users] qat is not working with dpdk Anjum, Sohail
2021-03-04 6:14 ` Anjum, Sohail
2021-03-04 7:38 ` Kusztal, ArkadiuszX
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).