Example: dpdk-testpmd -c 0x7ffc0000 -n 4 -a d8:00.1, tx_pp=1 -a d8:00.0,tx_pp=1--burst=64 --txd=256 --rxd=256 --mbcache=512 --rxq=2 --txq=2 --nb-cores=1 --no-lsc-interrupt -i --auto-start --rss-udp You can read more about testpmd and the specific mlx5 devargs for tx_pp here: http://doc.dpdk.org/guides/nics/mlx5.html Regards, Asaf Penso ________________________________ From: Antoine POLLENUS Sent: Monday, May 2, 2022 2:36:10 PM To: Asaf Penso ; users@dpdk.org ; Slava Ovsiienko Subject: RE: [ConnectX 6Dx]Issue using Tx scheduling feature in DPDK I’m not really familiar with testpmd, how am I supposed to do that ? From: Asaf Penso [mailto:asafp@nvidia.com] Sent: lundi 2 mai 2022 11:30 To: Antoine POLLENUS ; users@dpdk.org; Slava Ovsiienko Subject: Re: [ConnectX 6Dx]Issue using Tx scheduling feature in DPDK For example, I don't see you add the tx_pp devarg as part of the testpmd command line. Regards, Asaf Penso ________________________________ From: Antoine POLLENUS > Sent: Monday, May 2, 2022 11:53:18 AM To: Asaf Penso >; users@dpdk.org >; Slava Ovsiienko > Subject: RE: [ConnectX 6Dx]Issue using Tx scheduling feature in DPDK Thanks for you answer, Already red the doc on the subject but can’t make it work in testpmd. Didn’t implemented it myself at this step but seams I’m missing something. Do I need to enable a specific offload ? From: Asaf Penso [mailto:asafp@nvidia.com] Sent: lundi 2 mai 2022 09:59 To: Antoine POLLENUS >; users@dpdk.org; Slava Ovsiienko > Subject: RE: [ConnectX 6Dx]Issue using Tx scheduling feature in DPDK Hello Antoine, Have you had a look into mlx5 documentation? http://doc.dpdk.org/guides/nics/mlx5.html Please look for tx_pp. I’m adding @Slava Ovsiienko in case you need further support. Regards, Asaf Penso From: Antoine POLLENUS > Sent: Thursday, April 28, 2022 3:25 PM To: users@dpdk.org Subject: [ConnectX 6Dx]Issue using Tx scheduling feature in DPDK Hello, DPDK Version: 21.11 Firmware version : 22.32.1010 MLNX_OFED version: MLNX_OFED_LINUX-5.5-1.0.3.2-ubuntu20.04-x86_64 We are trying to use the DPDK tx scheduling feature on a ConnectX6 DX adapter. We experience some issues with the feature not working. The test is using Test-pmd in txonly mode. Here are the command used: sudo ./dpdk-testpmd -l 0-3 -n 4 -- -i --portmask=0x1 --nb-cores=1 --eth-peer=0,01:00:5e:00:00:08 --tx-ip=10.10.1.168,239.0.0.8 testpmd> set fwd txonly testpmd> set burst 64 testpmd> set txtimes 1000000,10000 By doing this I expect the feature working. Am i missing something ? I also added a print in txonly.c and clearly sees that the feature is not enabled dynf = rte_mbuf_dynflag_lookup (RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME, NULL); if (dynf >= 0) timestamp_mask = 1ULL << dynf; dynf = rte_mbuf_dynfield_lookup (RTE_MBUF_DYNFIELD_TIMESTAMP_NAME, NULL); if (dynf >= 0) timestamp_off = dynf; both function ( rte_mbuf_dynfield_lookup and rte_mbuf_dynflag_lookup) returns -1 I also tried to enabled the feature. testpmd> port config 0 tx_offload send_on_timestamp on but when doing this DPDK tells me that I don't have these offload capabilities Hope you will be able to help me. Regards Antoine