From: Raslan Darawsheh <rasland@nvidia.com>
To: raktim bhatt <rocky.cair@gmail.com>,
"users@dpdk.org" <users@dpdk.org>,
NBU-Contact-Thomas Monjalon <thomas@monjalon.net>
Cc: Slava Ovsiienko <viacheslavo@nvidia.com>, Asaf Penso <asafp@nvidia.com>
Subject: Re: [dpdk-users] DPDK: MPLS packet processing
Date: Mon, 18 Jan 2021 08:46:05 +0000 [thread overview]
Message-ID: <DM6PR12MB2748735E761B0A7D3981918CCFA40@DM6PR12MB2748.namprd12.prod.outlook.com> (raw)
In-Reply-To: <CAGQs35Vz12hXaWRQD2snNeUMJWKQfhaqBis6Pe2sUgQzt7kuNQ@mail.gmail.com>
++,
Hi Raktim,
> -----Original Message-----
> From: users <users-bounces@dpdk.org> On Behalf Of raktim bhatt
> Sent: Saturday, January 16, 2021 10:46 AM
> To: users@dpdk.org
> Subject: [dpdk-users] DPDK: MPLS packet processing
>
> Hi All,
>
> I am trying to build a multi-RX-queue dpdk program, using RSS to split the
> incoming traffic into RX queues on a single port. Mellanox ConnectX-5 and
> DPDK Version 19.11 is used for this purpose. It works fine when I use IP
> over Ethernet packets as input. However when the packet contains IP over
> MPLS over Ethernet, RSS does not seem to work. As a result, all packets
> belonging to various flows (with different src & dst IPs, ports over MPLS)
> are all sent into the same RX queue.
>
>
> My queries are
>
> 1. Is there any parameter/techniques in DPDK to distribute MPLS packets to
> multiple RX queues?
>
I've tried it over my setup with testpmd:
./build/app/dpdk-testpmd -n 4 -w 0000:08:00.0 -- --mbcache=512 -i --nb-cores=27 --rxq=4 --txq=4 --rss-ip
testpmd> set verbose 1
testpmd> start
then tried to send two MPLS packets with different src IP:
packet1 = Ether()/MPLS()/IP(src='1.1.1.1')
packet2 = Ether()/MPLS()/IP(src='1.1.1.2')
and I see that both packets are being spread over the queues, see the bellow testpmd dump output:
testpmd> port 0/queue 3: received 1 packets
src=00:00:00:00:00:00 - dst=FF:FF:FF:FF:FF:FF - type=0x8847 - length=60 - nb_segs=1 - RSS hash=0x43781943 - RSS queue=0x3 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER - l2_len=14 - Receive queue=0x3
ol_flags: PKT_RX_RSS_HASH PKT_RX_L4_CKSUM_UNKNOWN PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
port 0/queue 1: received 1 packets
src=00:00:00:00:00:00 - dst=FF:FF:FF:FF:FF:FF - type=0x8847 - length=60 - nb_segs=1 - RSS hash=0xb8631e05 - RSS queue=0x1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER - l2_len=14 - Receive queue=0x1
ol_flags: PKT_RX_RSS_HASH PKT_RX_L4_CKSUM_UNKNOWN PKT_RX_IP_CKSUM_GOOD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
first packet was received on queue 3 and the second one was received over queue 1,
by the way, this is with both 19.11.0 and v19.11.6
> 2. Is there any way to strip off MPLS tags (between Eth and IP) in
> hardware, something like hw_vlan_strip?
>
For this I'm not sure we have such thing in dpdk maybe Thomas can confirm this here?
>
> My Port configuration is
>
>
> const struct rte_eth_conf default_port_conf = {
>
> .rxmode = {
>
> .hw_vlan_strip = 0, /* VLAN strip enabled. */
>
> .header_split = 0, /* Header Split disabled. */
>
> .hw_ip_checksum = 0, /* IP checksum offload disabled. */
>
> .hw_strip_crc = 0, /* CRC stripping by hardware disabled.
> */
>
> },
>
> .rx_adv_conf = {
>
> .rss_conf = {
>
> .rss_key = NULL,
>
> .rss_key_len = 0,
>
> .rss_hf = ETH_RSS_IP,
>
> },
>
> } };
>
> _______________________
>
>
> Thanks and Regards
>
> Raktim Bhatt
next prev parent reply other threads:[~2021-01-18 8:46 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-16 8:45 raktim bhatt
2021-01-18 8:46 ` Raslan Darawsheh [this message]
2021-01-18 10:07 ` Thomas Monjalon
2021-01-18 10:13 ` Raslan Darawsheh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DM6PR12MB2748735E761B0A7D3981918CCFA40@DM6PR12MB2748.namprd12.prod.outlook.com \
--to=rasland@nvidia.com \
--cc=asafp@nvidia.com \
--cc=rocky.cair@gmail.com \
--cc=thomas@monjalon.net \
--cc=users@dpdk.org \
--cc=viacheslavo@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).