From: Vamsi Kommana <Vamsi.Kommana@LntTechservices.com>
To: "users@dpdk.org" <users@dpdk.org>
Subject: [dpdk-users] DPDK-PKTGEN- Did not find any ports to use
Date: Fri, 23 Oct 2015 07:03:19 +0000 [thread overview]
Message-ID: <FD5AFF487CD0444DB99FCB59269B332E53F838@POCITMSEXMB08.LntUniverse.com> (raw)
Hi Team,
I was trying to install DPDK-Pktgen(Pktgen version 2.7.7 using
DPDK-1.7.1) for testing 10G Ethernet ports using NIC card, with 4
cores(1: Kernel 1:logs for pktgen 2:for Tx Rx of traffic).
But i was ending up with "*** Did not find any ports to use ***" while I was using the below mentioned command
Command:
--------
./app/build/pktgen -c 0x0c -n 3 --proc-type auto -m 512 --file-prefix pg
-- -T -P -m "2.0,3.1"
collected logs are as below...
-----------------------#
oot@localhost pktgen]#
BSD LICENSEpktgen]#
oot@localhost pktgen]#
Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
All rights reserved.
oot@localhost pktgen]#
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:st pktgen]#
oot@localhost pktgen]#
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.]#
* Neither the name of Intel Corporation nor the names of its
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
oot@localhost pktgen]#
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
oot@localhost pktgen]#
-----------------------# ./app/build/pktgen -c 0x0c -n 3 --proc-type auto -m 512 --file-prefix pg -- -T -P -m "2.0,3.1"
Copyright (c) <2010-2014>, Wind River Systems, Inc. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1) Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2) Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
3) Neither the name of Wind River Systems nor the names of its contributors may be
used to endorse or promote products derived from this software without specific
prior written permission.
4) The screens displayed by the application must contain the copyright notice as defined
above and can not be removed without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Pktgen created by: Keith Wiles -- >>> Powered by Intel® DPDK <<<
-----------------------
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 1 on socket 0
EAL: Detected lcore 2 as core 0 on socket 0
EAL: Detected lcore 3 as core 1 on socket 0
EAL: Support maximum 64 logical core(s) by configuration.
EAL: Detected 4 lcore(s)
EAL: Auto-detected process type: PRIMARY
EAL: cannot open VFIO container, error 2 (No such file or directory)
EAL: VFIO support could not be initialized
EAL: Setting up memory...
EAL: Ask a virtual area of 0x800000 bytes
EAL: Virtual area found at 0x7f071ca00000 (size = 0x800000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f071c600000 (size = 0x200000)
EAL: Ask a virtual area of 0x49800000 bytes
EAL: Virtual area found at 0x7f06d2c00000 (size = 0x49800000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f06d2800000 (size = 0x200000)
EAL: Ask a virtual area of 0x35400000 bytes
EAL: Virtual area found at 0x7f069d200000 (size = 0x35400000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f069ce00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f069ca00000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f069c600000 (size = 0x200000)
EAL: Ask a virtual area of 0x200000 bytes
EAL: Virtual area found at 0x7f069c200000 (size = 0x200000)
EAL: Requesting 256 pages of size 2MB from socket 0
EAL: TSC frequency is ~3092981 KHz
EAL: Master core 2 is ready (tid=1d745880)
EAL: Core 3 is ready (tid=1bdfe700)
EAL: PCI device 0000:01:00.0 on NUMA socket -1
EAL: probe driver: 8086:1528 rte_ixgbe_pmd
EAL: 0000:01:00.0 not managed by UIO driver, skipping
EAL: PCI device 0000:01:00.1 on NUMA socket -1
EAL: probe driver: 8086:1528 rte_ixgbe_pmd
EAL: 0000:01:00.1 not managed by UIO driver, skipping
2.0 = lcores(rx 0000000000000004, tx 0000000000000004) ports(rx 0000000000000001, tx 0000000000000001)
3.1 = lcores(rx 0000000000000008, tx 0000000000000008) ports(rx 0000000000000002, tx 0000000000000002)
!
!
!
Lua 5.2.3 Copyright (C) 1994-2013 Lua.org, PUC-Rio
>>> Packet Burst 32, RX Desc 512, TX Desc 512, mbufs/port 4096, mbuf cache 512
!PANIC!: *** Did not find any ports to use ***
PANIC in pktgen_config_ports():
*** Did not find any ports to use ***6: [./app/build/pktgen() [0x422c25]]
5: [/lib64/libc.so.6(__libc_start_main+0xf5) [0x3b37821d65]]
4: [./app/build/pktgen(main+0x463) [0x4226f3]]
3: [./app/build/pktgen(pktgen_config_ports+0xf71) [0x439111]]
2: [./app/build/pktgen(__rte_panic+0xc9) [0x42210f]]
1: [./app/build/pktgen(rte_dump_stack+0x18) [0x4b58b8]]
Aborted (core dumped)
[root@localhost pktgen]#
[root@localhost pktgen]#
On googling i found the issues might be due to binding and when i tried the below steps i was ending up with binding failed and logs are as below
[root@localhost tools]# ./dpdk_nic_bind.py --status
Network devices using DPDK-compatible driver
============================================
<none>
Network devices using kernel driver
===================================
0000:00:19.0 '82579LM Gigabit Network Connection' if=em1 drv=e1000e unused=igb_uio
0000:01:00.0 'Ethernet Controller 10-Gigabit X540-AT2' if=p1p1 drv=ixgbe unused=igb_uio
0000:01:00.1 'Ethernet Controller 10-Gigabit X540-AT2' if=p1p2 drv=ixgbe unused=igb_uio
0000:02:00.0 'VT6105/VT6106S [Rhine-III]' if=p33p1 drv=via-rhine unused=igb_uio *Active*
Other network devices
=====================
<none>
[root@localhost tools]# ./dpdk_nic_bind.py -bind=igb_uio p1p2
Error: bind failed for 0000:01:00.1 - Cannot open /sys/bus/pci/drivers/ind=igb_uio/bind
Error: unbind failed for 0000:01:00.1 - Cannot open /sys/bus/pci/drivers//unbind
[root@localhost tools]#
[root@localhost tools]#
Please let me know if i miss any...
Thanks in advance.
Kommana
L&T Technology Services Ltd
www.LntTechservices.com<http://www.lnttechservices.com/>
This Email may contain confidential or privileged information for the intended recipient (s). If you are not the intended recipient, please do not use or disseminate the information, notify the sender and delete it from your system.
next reply other threads:[~2015-10-23 7:03 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-23 7:03 Vamsi Kommana [this message]
2015-10-23 10:43 ` Mcnamara, John
2015-10-23 12:28 ` Vamsi Kommana
2015-10-23 14:42 Wiles, Keith
2015-10-27 5:05 ` Vamsi Kommana
2015-10-27 11:46 ` Vamsi Kommana
2015-10-27 14:37 ` Wiles, Keith
2015-10-28 12:24 ` Mudit Simlote
2015-10-28 13:59 ` Wiles, Keith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=FD5AFF487CD0444DB99FCB59269B332E53F838@POCITMSEXMB08.LntUniverse.com \
--to=vamsi.kommana@lnttechservices.com \
--cc=users@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).