From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124]) by inbox.dpdk.org (Postfix) with ESMTP id E1F3FA034F for ; Mon, 11 Oct 2021 08:36:15 +0200 (CEST) Received: from [217.70.189.124] (localhost [127.0.0.1]) by mails.dpdk.org (Postfix) with ESMTP id 27CC84111E; Mon, 11 Oct 2021 08:35:50 +0200 (CEST) Received: from EUR04-VI1-obe.outbound.protection.outlook.com (mail-eopbgr80041.outbound.protection.outlook.com [40.107.8.41]) by mails.dpdk.org (Postfix) with ESMTP id 499D34003C for ; Sat, 9 Oct 2021 06:42:53 +0200 (CEST) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=JGPitXCY1rG2vSAM4fuyQZS1pGsH1DJ+O26ArMPtvoBlhOhCbZUqfzd73feEGrX9TPIv/+tc1kjrFZ9gh1XAaeXLqWIXmXa6nPXLg/NlfK+uyQKHKuJuvz14SdrAkuPWsSIyb99RRH8PYE0IW/wz3p88s9O9eVUNpHzTdBndHHZuYEyG88G5ViIDRYP2WBrvLumCClegfV09ZXhh7tSkOQVaPQVt+nWOQ0Q/y8kMN3Nw98yDQiC0W6t0E0W78ouIiaJU0z/+IqkhdcLEOlUbiW1pJ1P39EBS+8qJuMqYK+HlpWyOWQJg0j57lwfev/RQ9XyOElnOHa7CtxWavAXCJQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=o28fXCo/u2qMvWhiHH5rJV/yhSAE/O+Cu5D8I3HO3xU=; b=maigMUfgmYZ0gNjVNvd80gwEi5p1PcztmpsXqgHuZd2TsJe6awkamKNfb+mzC4/O0KUR8qcbrSncKYTXHIk7vIlgJxnJEFj8r/6Rk82077IMgp7scPev7OKY/ZBUPPk6CtHrhjOxQiNlhrdSjPu2w70LWB1EC15S3WUiNL9mzOG+aSpDOvlY264lRd3Nb5eU3WYLcwMconKxCFLfLku9M/YIBTAQ3dJ74p/A6t8CQZQlfSSCykmzL/bLeJ6SZZHkAvXf266041EGRaIJ5ypaa79DWriFtLWGs8FW0qpJYPFxVbJwrleOqdhSG3HTm8u2BNDgpNveSNxpI9wtu7Bl5A== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=ericsson.com; dmarc=pass action=none header.from=ericsson.com; dkim=pass header.d=ericsson.com; arc=none DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ericsson.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=o28fXCo/u2qMvWhiHH5rJV/yhSAE/O+Cu5D8I3HO3xU=; b=L7x3HknUk7aGXtRzdbXr9ci0r4reNFZLsQRt9gaoM16xsIDTtuUfAQCiKQzEK/yq7ToH+rNSLo/QQARtcAO3AVZrp/ZR3TW0NueQYOcEt+c+SIOPSw/miC0wdttURF4LmXgkTwJBjbHeyHklJbHJuq9fKg4JPegkWRk+hIRRk9s= Received: from HE1PR07MB4220.eurprd07.prod.outlook.com (2603:10a6:7:a2::20) by HE1PR0701MB2492.eurprd07.prod.outlook.com (2603:10a6:3:71::22) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.4587.16; Sat, 9 Oct 2021 04:42:50 +0000 Received: from HE1PR07MB4220.eurprd07.prod.outlook.com ([fe80::20a5:78cb:654a:8e50]) by HE1PR07MB4220.eurprd07.prod.outlook.com ([fe80::20a5:78cb:654a:8e50%6]) with mapi id 15.20.4587.024; Sat, 9 Oct 2021 04:42:48 +0000 From: Jaeeun Ham To: Thomas Monjalon CC: "users@dpdk.org" , "alialnu@nvidia.com" , "rasland@nvidia.com" , "asafp@nvidia.com" , Keunho Shin , Joonmo Koo Subject: RE: I need DPDK MLX5 Probe error support Thread-Topic: I need DPDK MLX5 Probe error support Thread-Index: Adex8Y/6HkRA7eCuSI6Sm+gHAPyyMABQ31VAAHuY/wAAlilrcAAr1xyAAJst8mAAAj3MAAACp1twAAJCdIAAfK6I0AAA3rHgAAWEYaA= Date: Sat, 9 Oct 2021 04:42:48 +0000 Message-ID: References: <6007812.z5yfQvPEFT@thomas> <2929698.unaRaE0BUr@thomas> In-Reply-To: Accept-Language: ko-KR, en-US Content-Language: en-US X-MS-Has-Attach: yes X-MS-TNEF-Correlator: authentication-results: monjalon.net; dkim=none (message not signed) header.d=none;monjalon.net; dmarc=none action=none header.from=ericsson.com; x-ms-publictraffictype: Email x-ms-office365-filtering-correlation-id: 8308cef0-323e-432c-4876-08d98adf3ef4 x-ms-traffictypediagnostic: HE1PR0701MB2492: x-ms-exchange-transport-forked: True x-microsoft-antispam-prvs: x-ms-oob-tlc-oobclassifiers: OLM:635; x-ms-exchange-senderadcheck: 1 x-ms-exchange-antispam-relay: 0 x-microsoft-antispam: BCL:0; x-microsoft-antispam-message-info: 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 x-forefront-antispam-report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:HE1PR07MB4220.eurprd07.prod.outlook.com; PTR:; CAT:NONE; SFS:(4636009)(366004)(966005)(6506007)(26005)(2940100002)(83380400001)(64756008)(33656002)(66476007)(66556008)(76116006)(66946007)(71200400001)(55016002)(508600001)(66446008)(4326008)(8936002)(38070700005)(8676002)(9686003)(30864003)(107886003)(86362001)(52536014)(6916009)(5660300002)(99936003)(186003)(2906002)(7696005)(44832011)(122000001)(54906003)(316002)(38100700002)(579004)(559001); DIR:OUT; SFP:1101; x-ms-exchange-antispam-messagedata-chunkcount: 1 x-ms-exchange-antispam-messagedata-0: =?us-ascii?Q?5yJAkTbznWmNlVL+nolPwTYdAtSJrka/U3u5IVpy8il5G/Uh0lyqSzXssy9H?= =?us-ascii?Q?/JLrDuI70UR35MVn15IHB6JWoJAPz68qRfF75nItgwmCvY7tkJbauetDFrgw?= =?us-ascii?Q?enQg/zrqPCaY500KTAzvhlTUbeFpUZteo9DMcOn92pZW3JRzDfkuwkSjzxXn?= =?us-ascii?Q?45GRm6gdeTpbgbhP2mCVEBM3Uaw8TgVTXuil0qj70GDSQ43M8vG6lqGBBbEw?= =?us-ascii?Q?juJr81AGKD0BZfS9QNP2vSo6Zg5sSYNVp9XfbwysKYPhIVFob6Lm/0Mk5dli?= =?us-ascii?Q?Zan83Qn/msvd30XNZ8yRhIibUgp3xLapQb6TvmBaSk6QK1ba5vXS8kOCQ0gO?= =?us-ascii?Q?OoqBVNuljgHlpbHwRUviAr2LBOJNSI5/yM+amPdETi9nThKJBBINvd8BTRXN?= =?us-ascii?Q?EQ/6nJaal7fMV4wXgAPe9OhzT1bbXzZK86N+fqjHvYDsr9IAVPmccGEOXgDJ?= =?us-ascii?Q?YUIGTBcqAa2u8qWrXa95ggAG2FNiyCAFY6m+6h6K4sAiWRWzupRjWYYILDRL?= =?us-ascii?Q?RPFm80D2gr/wYFN1uVD27dmISzqXIJWBIQsIR/QZ9dvv/Qr/39djSbTnwvCb?= =?us-ascii?Q?0Fos1Z3H0kZbj/7rGI9zhfFF4U4kkauOWwflW5AULDXtSmL7oeXXWBk4QBU2?= =?us-ascii?Q?b7TVeNrcm2RbEkuc8zUyqsSKrTLRnTjUzN4kui4gtbvzm9MopS2pnXKyhBlc?= =?us-ascii?Q?huDEveFQbDzhingQ/vfJsU3eVa7xteqUQVE+YJK3taKevpXytDXzQnH0b9YM?= =?us-ascii?Q?wM3nc2jFneO+HV1sjufSYrfh1Ql/c/t1zd8iRvG21K7wGdoTXnsfvXUAtLyG?= =?us-ascii?Q?80gj6SuxrgksZgMiFK6mxBBx5vC3a8wtgwpAM8XYIKs+9oOmLEnGFKaDH1wX?= =?us-ascii?Q?RqU/b8N9OH6eEyXxXQrlg3rsiN3qmB82qLd04xlmpfUh3w8pCOWYu9Fy2vlu?= =?us-ascii?Q?AP8hClhoQEbmDrh9wh6tlWn1a/aRnNuloAsuRjbcUHXNo9ooAG6o4Uahkil/?= =?us-ascii?Q?YzpeYH+mtUn54kTWNa28TOVI2tb5tB0GFKSLO41tQMFsl2sKs8MU2y05+9CT?= =?us-ascii?Q?P/3KV+T0ONOhIZ6shC26WMIW8uZQMhPuelMDozeJBgjUsPR3VrLtOfdQLtF6?= =?us-ascii?Q?bKJ6UR8/lKdZAlhEFB+QQKD/OEaa0QYR69oDkgORYjDy0OJkCoKHUL54LBF5?= =?us-ascii?Q?bJ6Il7KFECoUlMXa8p884N5i9QyaO899z1ixJFa0MxU4fiFg7TaJn82aKRhO?= =?us-ascii?Q?BebkOrELPdjQGWyz83w7gNuotZUr9PMBZNED7+PfHogQ5XqIFD645affrcSf?= =?us-ascii?Q?/DA=3D?= MIME-Version: 1.0 X-OriginatorOrg: ericsson.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-AuthSource: HE1PR07MB4220.eurprd07.prod.outlook.com X-MS-Exchange-CrossTenant-Network-Message-Id: 8308cef0-323e-432c-4876-08d98adf3ef4 X-MS-Exchange-CrossTenant-originalarrivaltime: 09 Oct 2021 04:42:48.3395 (UTC) X-MS-Exchange-CrossTenant-fromentityheader: Hosted X-MS-Exchange-CrossTenant-id: 92e84ceb-fbfd-47ab-be52-080c6b87953f X-MS-Exchange-CrossTenant-mailboxtype: HOSTED X-MS-Exchange-CrossTenant-userprincipalname: iZqD+CUwbP5g4dZjkj3bK2/kCYzkwylrMjS39UhYQwjBkKKOVDMaXpcA7HaJXPh41PA55SitRAICb52ur2Zqng== X-MS-Exchange-Transport-CrossTenantHeadersStamped: HE1PR0701MB2492 X-Mailman-Approved-At: Mon, 11 Oct 2021 08:35:44 +0200 X-Content-Filtered-By: Mailman/MimeDel 2.1.29 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-BeenThere: users@dpdk.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: DPDK usage discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: users-bounces@dpdk.org Hi Thomas, I attached both testpmd results. (host server, docker container) Could you interpret what is the fault cause? BTW, I added LD_LIBRARY_PATH=libjansson.so.4 to run the dpdk-testpmd on the host. mlx5_nl_ifindex() seems to require linux kernel 4.17 at least. mlx5_nl_send() and mlx5_nl_recv() looks normal. However, it is a bit strange that data.flags is set to MLX5_NL_CMD_GET_INDEX instead of MLX5_CMD_GET_INDEX in the second command, Anyway, rather than these functions, we estimate that the RDMA_NLDEV_CMD_PORT_GET command does not work in this function. * This is the only somewhat safe method to avoid resorting to heuristics * when faced with port representors. Unfortunately it requires at least * Linux 4.17. BR/Jaeeun -----Original Message----- From: Jaeeun Ham Sent: Saturday, October 9, 2021 10:15 AM To: 'Thomas Monjalon' > Cc: 'users@dpdk.org' >; 'alialnu@nvidia.com' >; 'rasland@nvidia.com' >; 'asafp@nvidia.com' >; Keunho Shin >; Joonmo Koo > Subject: RE: I need DPDK MLX5 Probe error support +Keunho Shin >; Joonmo Koo +> -----Original Message----- From: Jaeeun Ham Sent: Saturday, October 9, 2021 10:12 AM To: Thomas Monjalon > Cc: users@dpdk.org; alialnu@nvidia.com; rasland@nvidia.com; asafp@nvidia.com Subject: RE: I need DPDK MLX5 Probe error support Hi Thomas, I am sorry for the inconvenience. Docker is compiled as a layered, so three attached Dockerfiles are used. Dockerfile.prod.base: application base Dockerfile.prod: application Dockerfile.build: tool chains < docker container version > 4a9d999f0c15:/ # uname -a Linux 4a9d999f0c15 4.15.0-46-generic #49-Ubuntu SMP Wed Feb 6 09:33:07 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux BR/Jaeeun -----Original Message----- From: Thomas Monjalon > Sent: Wednesday, October 6, 2021 10:19 PM To: Jaeeun Ham > Cc: users@dpdk.org; alialnu@nvidia.com; rasland@nvidia.com; asafp@nvidia.com Subject: Re: I need DPDK MLX5 Probe error support I don't even know which Linux distribution you are using. Please send the Dockerfile. If it compiles in Docker, it should run. 06/10/2021 14:27, Jaeeun Ham: > Hi Thomas, > > The cause is that I fail to load mlx5 driver using pci address on the docker container. > So, I tried to add rdma-core library to solve dependency issue you mentioned as below. > Docker image is built with these Dockerfiles. > This docker image is built with DPDK20.11. > How should I add rdma-core library? > > I don't find any rdma related so files in the docker container. > b273016e5be8:/usr/local/lib # ls *mlx* librte_common_mlx5.so > librte_common_mlx5.so.21 librte_common_mlx5.so.21.0 > librte_net_mlx5.so librte_net_mlx5.so.21 librte_net_mlx5.so.21.0 > b273016e5be8:/usr/local/lib # ls *rdma* > ls: cannot access '*rdma*': No such file or directory > > dpdk-20.11/doc/guides/rel_notes/release_20_11.rst > 911: * rdma-core: > 913: * rdma-core-31.0-1 and above > > > > < error log > > f1d23550a947:/ # cat /tmp/logs/epp.log MIDHAUL_PCI_ADDR:0000:12:01.0, > BACKHAUL_PCI_ADDR:0000:12:01.1 MIDHAUL_IP_ADDR:10.255.20.125, > BACKHAUL_IP_ADDR:10.255.20.124 > mlx5_pci: unable to recognize master/representors on the multiple IB > devices > common_mlx5: Failed to load driver = mlx5_pci. > > EAL: Requested device 0000:12:01.0 cannot be used > mlx5_pci: unable to recognize master/representors on the multiple IB > devices > common_mlx5: Failed to load driver = mlx5_pci. > > EAL: Requested device 0000:12:01.1 cannot be used > EAL: Bus (pci) probe failed. > FATAL: epp_init.c::copy_mac_addr:130: Call to > rte_eth_dev_get_port_by_name(src_dpdk_dev_name, &port_id) failed: -19 > (Unknown error -19), rte_errno=0 (not set) > > Caught signal 6 > Obtained 7 stack frames, tid=1377. > tid=1377, /usr/local/bin/ericsson-packet-processor() [0x40a3c4] > tid=1377, /lib64/libpthread.so.0(+0x13f80) [0x7f56c4786f80] tid=1377, > /lib64/libc.so.6(gsignal+0x10b) [0x7f56c229018b] tid=1377, > /lib64/libc.so.6(abort+0x175) [0x7f56c2291585] tid=1377, > /usr/local/bin/ericsson-packet-processor(main+0x458) [0x406818] > tid=1377, /lib64/libc.so.6(__libc_start_main+0xed) [0x7f56c227b34d] > tid=1377, /usr/local/bin/ericsson-packet-processor(_start+0x2a) > [0x4090ea] > > > > BR/Jaeeun > > -----Original Message----- > From: Thomas Monjalon > > Sent: Wednesday, October 6, 2021 7:59 PM > To: Jaeeun Ham > > Cc: users@dpdk.org; alialnu@nvidia.com; rasland@nvidia.com; > asafp@nvidia.com > Subject: Re: I need DPDK MLX5 Probe error support > > Installing dependencies is not an issue. > I don't understand which support you need. > > > 06/10/2021 11:57, Jaeeun Ham: > > Hi Thomas, > > > > Could you take a look at the attached file? > > My engineer managed to compile DPDK 20.11 to support MLX5. Please find the output from dpdk-testpmd command in attached file. As you can see testpmd was able to probe mlx5_pci drivers and get MAC addresses. > > The key issue in his case for enabling MLX5 support was to export rdma-core lib path to shared libs for meson/ninja commands as new build system automatically enables MLX5 support if needed dependencies are available. > > > > BR/Jaeeun > > > > -----Original Message----- > > From: Thomas Monjalon > > >> > > Sent: Sunday, October 3, 2021 4:51 PM > > To: Jaeeun Ham > > >> > > Cc: users@dpdk.org>; > > alialnu@nvidia.com>; > > rasland@nvidia.com>; > > asafp@nvidia.com> > > Subject: Re: I need DPDK MLX5 Probe error support > > > > Hi, > > > > I think you need to read the documentation. > > For DPDK install on Linux: > > https://protect2.fireeye.com/v1/url?k=7925aba3-26be92c2-7925eb38-86d > > 8a > > 30ca42b-d871f122b4a0a61a&q=1&e=88eca0f4-aa71-4ba8-a332-179f08406da3& > > u= > > https%3A%2F%2Fdoc.dpdk.org%2Fguides%2Flinux_gsg%2Fbuild_dpdk.html%23 > > co mpiling-and-installing-dpdk-system-wide > > For mlx5 specific dependencies, install rdma-core package: > > https://protect2.fireeye.com/v1/url?k=9bce4984-c45570e5-9bce091f-86d > > 8a > > 30ca42b-25bd3d467b5f290d&q=1&e=88eca0f4-aa71-4ba8-a332-179f08406da3& > > u= > > https%3A%2F%2Fdoc.dpdk.org%2Fguides%2Fnics%2Fmlx5.html%23linux-prere > > qu > > isites > > > > > > 02/10/2021 12:57, Jaeeun Ham: > > > Hi, > > > > > > Could you teach me how to install dpdk-testpmd? > > > I have to run the application on the host server, not a development server. > > > So, I don't know how to get dpdk-testpmd. > > > > > > By the way, testpmd run result is as below. > > > root@seroics05590:~/ejaeham# testpmd > > > EAL: Detected 64 lcore(s) > > > EAL: libmlx4.so.1: cannot open shared object file: No such file or > > > directory > > > EAL: FATAL: Cannot init plugins > > > > > > EAL: Cannot init plugins > > > > > > PANIC in main(): > > > Cannot init EAL > > > 5: [testpmd(_start+0x2a) [0x55d301d98e1a]] > > > 4: [/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe7) > > > [0x7f5e044a4bf7]] > > > 3: [testpmd(main+0x907) [0x55d301d98d07]] > > > 2: > > > [/usr/lib/x86_64-linux-gnu/librte_eal.so.17.11(__rte_panic+0xbd) > > > [0x7f5e04ca3cfd]] > > > 1: > > > [/usr/lib/x86_64-linux-gnu/librte_eal.so.17.11(rte_dump_stack+0x2e > > > ) > > > [0x7f5e04cac19e]] Aborted > > > > > > > > > I added option below when the process is starting in the docker. > > > dv_flow_en=0 \ > > > --log-level=pmd,8 \ > > > < MLX5 log > > > > 415a695ba348:/tmp/logs # cat epp.log > > > MIDHAUL_PCI_ADDR:0000:12:01.0, > > > BACKHAUL_PCI_ADDR:0000:12:01.1 MIDHAUL_IP_ADDR:10.255.21.177, > > > BACKHAUL_IP_ADDR:10.255.21.178 > > > mlx5_pci: unable to recognize master/representors on the multiple > > > IB devices > > > common_mlx5: Failed to load driver = mlx5_pci. > > > > > > EAL: Requested device 0000:12:01.0 cannot be used > > > mlx5_pci: unable to recognize master/representors on the multiple > > > IB devices > > > common_mlx5: Failed to load driver = mlx5_pci. > > > > > > EAL: Requested device 0000:12:01.1 cannot be used > > > EAL: Bus (pci) probe failed. > > > EAL: Trying to obtain current memory policy. > > > EAL: Setting policy MPOL_PREFERRED for socket 1 Caught signal 15 > > > EAL: Restoring previous memory policy: 0 > > > EAL: Calling mem event callback 'MLX5_MEM_EVENT_CB:(nil)' > > > EAL: request: mp_malloc_sync > > > EAL: Heap on socket 1 was expanded by 5120MB > > > FATAL: epp_init.c::copy_mac_addr:130: Call to > > > rte_eth_dev_get_port_by_name(src_dpdk_dev_name, &port_id) failed: > > > -19 (Unknown error -19), rte_errno=0 (not set) > > > > > > Caught signal 6 > > > Obtained 7 stack frames, tid=713. > > > tid=713, /usr/local/bin/ericsson-packet-processor() [0x40a4a4] > > > tid=713, /lib64/libpthread.so.0(+0x13f80) [0x7f7e1eae8f80] > > > tid=713, > > > /lib64/libc.so.6(gsignal+0x10b) [0x7f7e1c5f818b] tid=713, > > > /lib64/libc.so.6(abort+0x175) [0x7f7e1c5f9585] tid=713, > > > /usr/local/bin/ericsson-packet-processor(main+0x458) [0x406818] > > > tid=713, /lib64/libc.so.6(__libc_start_main+0xed) [0x7f7e1c5e334d] > > > tid=713, /usr/local/bin/ericsson-packet-processor(_start+0x2a) > > > [0x4091ca] > > > > > > < i40e log > > > > cat epp.log > > > MIDHAUL_PCI_ADDR:0000:3b:0d.5, BACKHAUL_PCI_ADDR:0000:3b:0d.4 > > > MIDHAUL_IP_ADDR:10.51.21.112, BACKHAUL_IP_ADDR:10.51.21.113 > > > EAL: Trying to obtain current memory policy. > > > EAL: Setting policy MPOL_PREFERRED for socket 1 > > > EAL: Restoring previous memory policy: 0 > > > EAL: Calling mem event callback 'vfio_mem_event_clb:(nil)' > > > EAL: request: mp_malloc_sync > > > EAL: Heap on socket 1 was expanded by 5120MB > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 28 > > > i40e_dev_rx_queue_setup(): Rx Burst Bulk Alloc Preconditions are satisfied. Rx Burst Bulk Alloc function will be used on port=0, queue=0. > > > i40e_set_tx_function_flag(): Neither simple nor vector Tx enabled > > > on Tx queue 0 > > > > > > i40evf_dev_start(): >> > > > i40evf_config_rss(): No hash flag is set > > > i40e_set_rx_function(): Vector Rx path will be used on port=0. > > > i40e_set_tx_function(): Xmit tx finally be used. > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 6 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 7 > > > i40evf_add_del_all_mac_addr(): add/rm mac:62:64:21:84:83:b0 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 10 > > > i40evf_dev_rx_queue_start(): >> > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 8 > > > i40evf_handle_pf_event(): VIRTCHNL_EVENT_LINK_CHANGE event > > > i40evf_dev_tx_queue_start(): >> > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 8 > > > i40evf_handle_pf_event(): VIRTCHNL_EVENT_LINK_CHANGE event > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 14 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 14 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 14 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 28 > > > i40e_dev_rx_queue_setup(): Rx Burst Bulk Alloc Preconditions are satisfied. Rx Burst Bulk Alloc function will be used on port=1, queue=0. > > > i40e_set_tx_function_flag(): Neither simple nor vector Tx enabled > > > on Tx queue 0 > > > > > > i40evf_dev_start(): >> > > > i40evf_config_rss(): No hash flag is set > > > i40e_set_rx_function(): Vector Rx path will be used on port=1. > > > i40e_set_tx_function(): Xmit tx finally be used. > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 6 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 7 > > > i40evf_add_del_all_mac_addr(): add/rm mac:c2:88:5c:a9:a2:ef > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 10 > > > i40evf_dev_rx_queue_start(): >> > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 8 > > > i40evf_handle_pf_event(): VIRTCHNL_EVENT_LINK_CHANGE event > > > i40evf_dev_tx_queue_start(): >> > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 8 > > > i40evf_handle_pf_event(): VIRTCHNL_EVENT_LINK_CHANGE event > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 14 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 14 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 14 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > USER1: rte_ip_frag_table_create: allocated of 12583040 bytes at > > > socket > > > -1 > > > i40evf_dev_mtu_set(): port 1 must be stopped before configuration > > > i40evf_dev_mtu_set(): port 0 must be stopped before configuration > > > Caught signal 10 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 15 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 15 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 15 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 15 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 15 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 15 > > > Caught signal 10 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 15 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 15 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 15 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 15 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 15 > > > i40evf_dev_alarm_handler(): ICR01_ADMINQ is reported > > > i40evf_handle_aq_msg(): adminq response is received, opcode = 15 > > > > > > > > > process start option which is triggered by shell script is as below. > > > > > > < start-epp.sh > > > > exec /usr/local/bin/ericsson-packet-processor \ > > > $(get_dpdk_core_list_parameter) \ > > > $(get_dpdk_mem_parameter) \ > > > $(get_dpdk_hugepage_parameters) \ -d > > > /usr/local/lib/librte_mempool_ring.so \ -d > > > /usr/local/lib/librte_mempool_stack.so \ -d > > > /usr/local/lib/librte_net_pcap.so \ -d > > > /usr/local/lib/librte_net_i40e.so \ -d > > > /usr/local/lib/librte_net_mlx5.so \ -d > > > /usr/local/lib/librte_event_dsw.so \ $DPDK_PCI_OPTIONS \ > > > --vdev=event_dsw0 \ > > > --vdev=eth_pcap0,iface=midhaul_edk \ > > > --vdev=eth_pcap1,iface=backhaul_edk \ --file-prefix=container \ > > > --log-level lib.eal:debug \ > > > dv_flow_en=0 \ > > > --log-level=pmd,8 \ > > > -- \ > > > $(get_epp_mempool_parameter) \ > > > > > > "--neighbor-discovery-interface=midhaul_ker,${MIDHAUL_IP_ADDR},mac_addr_dev=${MIDHAUL_MAC_ADDR_DEV},vr_id=0" \ "--neighbor-discovery-interface=backhaul_ker,${BACKHAUL_IP_ADDR},mac_addr_dev=${BACKHAUL_MAC_ADDR_DEV},vr_id=1" > > > > > > BR/Jaeeun > > > > > > -----Original Message----- > > > From: Thomas Monjalon > > > >> > > > Sent: Wednesday, September 29, 2021 8:16 PM > > > To: Jaeeun Ham > > > >> > > > Cc: users@dpdk.org>; > > > alialnu@nvidia.com>; > > > rasland@nvidia.com>; > > > asafp@nvidia.com> > > > Subject: Re: I need DPDK MLX5 Probe error support > > > > > > 27/09/2021 02:18, Jaeeun Ham: > > > > Hi, > > > > > > > > I hope you are well. > > > > My name is Jaeeun Ham and I have been working for the Ericsson. > > > > > > > > I am suffering from enabling MLX5 NIC, so could you take a look at how to run it? > > > > There are two pci address for the SRIOV(vfio) mlx5 nic support > > > > but it doesn't run correctly. (12:01.0, 12:01.1) > > > > > > > > I started one process which is running inside the docker process that is on the MLX5 NIC support host server. > > > > The process started to run with following option. > > > > -d /usr/local/lib/librte_net_mlx5.so And the docker process > > > > has > > > > mlx5 libraries as below. > > > > > > Did you try on the host outside of any container? > > > > > > Please could you try following commands (variables to be replaced)? > > > > > > dpdk-hugepages.py --reserve 1G > > > ip link set $netdev netns $container > > > docker run --cap-add SYS_NICE --cap-add IPC_LOCK --cap-add NET_ADMIN \ > > > --device /dev/infiniband/ $image > > > echo show port summary all | dpdk-testpmd --in-memory -- -i > > > > > > > > > > > > > 706a37a35d29:/usr/local/lib # ls -1 | grep mlx > > > > librte_common_mlx5.so > > > > librte_common_mlx5.so.21 > > > > librte_common_mlx5.so.21.0 > > > > librte_net_mlx5.so > > > > librte_net_mlx5.so.21 > > > > librte_net_mlx5.so.21.0 > > > > > > > > But I failed to run the process with following error. > > > > (MIDHAUL_PCI_ADDR:0000:12:01.0, BACKHAUL_PCI_ADDR:0000:12:01.1) > > > > > > > > --- > > > > > > > > mlx5_pci: unable to recognize master/representors on the > > > > multiple IB devices > > > > common_mlx5: Failed to load driver = mlx5_pci. > > > > EAL: Requested device 0000:12:01.0 cannot be used > > > > mlx5_pci: unable to recognize master/representors on the > > > > multiple IB devices > > > > common_mlx5: Failed to load driver = mlx5_pci. > > > > EAL: Requested device 0000:12:01.1 cannot be used > > > > EAL: Bus (pci) probe failed. > > > > > > > > --- > > > > > > > > For the success case of pci address 12:01.2, it showed following messages. > > > > > > > > --- > > > > > > > > EAL: Detected 64 lcore(s) > > > > EAL: Detected 2 NUMA nodes > > > > EAL: Multi-process socket /var/run/dpdk/nah2/mp_socket > > > > EAL: Probing VFIO support... > > > > EAL: VFIO support initialized > > > > EAL: PCI device 0000:12:01.2 on NUMA socket 0 > > > > EAL: probe driver: 15b3:1016 net_mlx5 > > > > net_mlx5: MPLS over GRE/UDP tunnel offloading disabled due to > > > > old OFED/rdma-core version or firmware configuration > > > > net_mlx5: port 0 the requested maximum Rx packet size (2056) is > > > > larger than a single mbuf (2048) and scattered mode has not been > > > > requested > > > > USER1: rte_ip_frag_table_create: allocated of 6291584 bytes at > > > > socket > > > > 0 > > > > > > > > --- > > > > > > > > BR/Jaeeun -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: testpmd-on-the-docker-container.txt URL: -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: dpdk-testpmd-on-the-host.txt URL: -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: testpmd-on-the-docker-container.txt URL: -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: dpdk-testpmd-on-the-host.txt URL: