DPDK usage discussions
 help / color / Atom feed
* [dpdk-users] Cannot attach NIC to my application
@ 2020-09-07  8:49 CHANWEN.LIAO 廖展文
  0 siblings, 0 replies; only message in thread
From: CHANWEN.LIAO 廖展文 @ 2020-09-07  8:49 UTC (permalink / raw)
  To: users

Hi,

I¡¦m trying to attach NIC to my application using dpdk-stable-17.11.5, but rte_eth_dev_attach() return -1.
Could you help me to clarify why this happened?

Network devices using DPDK-compatible driver
======================================
0000:12:00.1 ¡¥FastLinQ QL41000 Series 10/25/40/50GbE Controller 8070¡¦ drv=igb_uio unused=qede

Fail print:
EAL: Detected 40 lcore(s)
EAL: Auto-detected process type: PRIMARY
EAL: Probing VFIO support¡K
EAL: PCI device 0000:12:00.0 on NUMA socket 0
EAL:  probe driver: 1077:8070 net_qede
EAL: PCI device 0000:12:00.1 on NUMA socket 0
EAL:  probe driver: 1077:8070 net_qede
[QEDE PMD:  ()]ecore_spq_block:Ramrod is stuck [CID ff100000 cmd 01 proto 08 echo 0000]
[qede_hw_err_notify:297()] HW error occurred [Ramrod Failure]
[QEDE PMD:  ()]ecore_hw_init_pf:Function start ramrod failed
[QEDE PMD:  ()]ecore_hw_init:init phase failed for loadcode 0x10100000 (rc -2)
[qed_slowpath_start:295(12:00.1:dpdk-port-0)]ecore_hw_init failed
[qede_common_dev_init:2975(12:00.1:dpdk-port-0)]Cannot start slowpath rc = -2
EAL: Requested device 0000:12:00.1 cannot be used

*************************************************************************
This email message, including any attachments, is for the sole
use of the intended recipient(s) and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient, please
contact the sender by reply e-mail and destroy all copies of the original
message. [Delta Electronics, INC. Taiwan]
*************************************************************************

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-07  8:49 [dpdk-users] Cannot attach NIC to my application CHANWEN.LIAO 廖展文

DPDK usage discussions

Archives are clonable:
	git clone --mirror http://inbox.dpdk.org/users/0 users/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 users users/ http://inbox.dpdk.org/users \
		users@dpdk.org
	public-inbox-index users


Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.users


AGPL code for this site: git clone https://public-inbox.org/ public-inbox