* [dpdk-users] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000 @ 2021-05-26 1:51 Truring Team 2021-05-26 4:13 ` Nishant Verma 0 siblings, 1 reply; 7+ messages in thread From: Truring Team @ 2021-05-26 1:51 UTC (permalink / raw) To: dev, users Hi Team, I am trying to run the dpdk test-pmd application (DPDK 20.11 and DPDK 21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE Controller but facing following issues: If someone can look into the following logs and help me figure out the issue? 1. DPDK 20.11 ( Using 1 GB hugepages) gdb ./dpdk-testpmd 12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7 12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc. 12:45:59.348 §License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html 12:45:59.349 §This is free software: you are free to change and redistribute it. 12:45:59.349 §There is NO WARRANTY, to the extent permitted by law. Type "show copying" 12:45:59.349 §and "show warranty" for details. 12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu". 12:45:59.351 §For bug reporting instructions, please see: 12:45:59.351 §http://www.gnu.org/software/gdb/bugs/... 12:45:59.415 §Reading symbols from /home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no debugging symbols found)...done. 12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i 12:46:11.493 §Starting program: /home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 -- -i 12:46:11.717 §[Thread debugging using libthread_db enabled] 12:46:11.719 §Using host libthread_db library "/lib64/libthread_db.so.1". 12:46:11.768 §EAL: Detected 6 lcore(s) 12:46:11.769 §EAL: Detected 1 NUMA nodes 12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)] 12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket 12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)] 12:46:11.792 §EAL: Selected IOVA mode 'PA' 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB 12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB 12:46:11.854 §EAL: Probing VFIO support... 12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)] 12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)] 12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)] 12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)] 12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)] 12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device: 0000:65:00.0 (socket 0) 12:46:11.915 § 12:46:11.915 §Program received signal SIGSEGV, Segmentation fault. 12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc () 12:46:11.916 §Missing separate debuginfos, use: debuginfo-install glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64 libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64 zlib-1.2.7-19.el7_9.x86_64 12:46:14.542 §(gdb) bt 12:46:14.548 §#0 0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc () 12:46:14.548 §#1 0x0000000000eb811e in ecore_hw_init () 12:46:14.549 §#2 0x0000000000ef7397 in qed_slowpath_start () 12:46:14.549 §#3 0x0000000000ef0483 in qede_common_dev_init () 12:46:14.549 §#4 0x0000000000ef1113 in qede_eth_dev_pci_probe () 12:46:14.549 §#5 0x0000000000a4450b in pci_probe () 12:46:14.550 §#6 0x00000000009dbc6c in rte_bus_probe () 12:46:14.550 §#7 0x00000000009fa91c in rte_eal_init () 12:46:14.617 §#8 0x0000000000425db1 in main () 12:46:17.052 §(gdb) quit 12:46:17.056 §A debugging session is active. 12:46:17.056 § 12:46:17.057 § Inferior 1 [process 23180] will be killed. 2. *DPDK 21.05:* ./dpdk-testpmd -l 0-5 -n4 -- -i 12:46:46.257 §EAL: Detected 6 lcore(s) 12:46:46.257 §EAL: Detected 1 NUMA nodes 12:46:46.258 §EAL: Detected static linkage of DPDK 12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket 12:46:46.285 §EAL: Selected IOVA mode 'PA' 12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0 12:46:46.288 §EAL: No available 2048 kB hugepages reported 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device: 0000:65:00.0 (socket 0) 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the MCP scratch-pad is not configured 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not initialized! 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not initialized 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW information 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-0)]qede probe failed rc -3 12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used 12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not created 12:46:46.423 §testpmd: No probed ethernet devices 12:46:46.461 §Interactive-mode selected 12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>: n=187456, size=2176, socket=0 12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc 12:46:46.540 §Done System Information: *ethtool -i p2p1* driver: qede version: 8.33.0.20 *firmware-version: mfw 8.24.44.0 storm 8.33.11.0* expansion-rom-version: bus-info: 0000:65:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: yes supports-priv-flags: yes *ethtool -i p2p2 *driver: qede version: 8.33.0.20 firmware-version: mfw 8.24.44.0 storm 8.33.11.0 expansion-rom-version: bus-info: 0000:65:00.1 supports-statistics: yes supports-test: yes supports-eeprom-access: no supports-register-dump: yes supports-priv-flags: yes *lspci -nn | grep Ether* 12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] 12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] 12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02) 12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02) cd /lib/firmware/qed/ ls 12:48:27.269 §qed_init_values-8.10.9.0.bin qed_init_values-8.30.12.0.bin qed_init_values_zipped-8.10.5.0.bin qed_init_values_zipped-8.33.11.0.bin qed_init_values_zipped-8.7.3.0.bin 12:48:27.272 §qed_init_values-8.14.6.0.bin qed_init_values-8.33.12.0.bin qed_init_values_zipped-8.15.3.0.bin qed_init_values_zipped-8.37.2.0.bin 12:48:27.273 §qed_init_values-8.18.9.0.bin qed_init_values-8.40.33.0.bin qed_init_values_zipped-8.20.0.0.bin qed_init_values_zipped-8.37.7.0.bin 12:48:27.275 §qed_init_values-8.20.0.0.bin qed_init_values_zipped-8.10.10.0.bin qed_init_values_zipped-8.33.1.0.bin qed_init_values_zipped-8.4.2.0.bin Best Regards Puneet ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-users] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000 2021-05-26 1:51 [dpdk-users] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000 Truring Team @ 2021-05-26 4:13 ` Nishant Verma 2021-05-26 4:20 ` Truring Team 0 siblings, 1 reply; 7+ messages in thread From: Nishant Verma @ 2021-05-26 4:13 UTC (permalink / raw) To: Truring Team; +Cc: dev, USERS Can you paste output of /proc/meminfo ? Regards, NV On Tue, May 25, 2021 at 9:52 PM Truring Team <truring12@gmail.com> wrote: > Hi Team, > > I am trying to run the dpdk test-pmd application (DPDK 20.11 and DPDK > 21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE > Controller but facing following issues: > > If someone can look into the following logs and help me figure out the > issue? > > > > 1. DPDK 20.11 ( Using 1 GB hugepages) > > gdb ./dpdk-testpmd > > 12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7 > > 12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc. > > 12:45:59.348 §License GPLv3+: GNU GPL version 3 or later > http://gnu.org/licenses/gpl.html > > 12:45:59.349 §This is free software: you are free to change and > redistribute it. > > 12:45:59.349 §There is NO WARRANTY, to the extent permitted by law. Type > "show copying" > > 12:45:59.349 §and "show warranty" for details. > > 12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu". > > 12:45:59.351 §For bug reporting instructions, please see: > > 12:45:59.351 §http://www.gnu.org/software/gdb/bugs/... > > 12:45:59.415 §Reading symbols from > /home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no debugging symbols > found)...done. > > 12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i > > 12:46:11.493 §Starting program: > /home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 -- -i > > 12:46:11.717 §[Thread debugging using libthread_db enabled] > > 12:46:11.719 §Using host libthread_db library "/lib64/libthread_db.so.1". > > 12:46:11.768 §EAL: Detected 6 lcore(s) > > 12:46:11.769 §EAL: Detected 1 NUMA nodes > > 12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)] > > 12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket > > 12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)] > > 12:46:11.792 §EAL: Selected IOVA mode 'PA' > > 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB > > 12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB > > 12:46:11.854 §EAL: Probing VFIO support... > > 12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)] > > 12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)] > > 12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)] > > 12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)] > > 12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)] > > 12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device: > 0000:65:00.0 (socket 0) > > 12:46:11.915 § > > 12:46:11.915 §Program received signal SIGSEGV, Segmentation fault. > > 12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc () > > 12:46:11.916 §Missing separate debuginfos, use: debuginfo-install > glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64 > libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64 > zlib-1.2.7-19.el7_9.x86_64 > > 12:46:14.542 §(gdb) bt > > 12:46:14.548 §#0 0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc () > > 12:46:14.548 §#1 0x0000000000eb811e in ecore_hw_init () > > 12:46:14.549 §#2 0x0000000000ef7397 in qed_slowpath_start () > > 12:46:14.549 §#3 0x0000000000ef0483 in qede_common_dev_init () > > 12:46:14.549 §#4 0x0000000000ef1113 in qede_eth_dev_pci_probe () > > 12:46:14.549 §#5 0x0000000000a4450b in pci_probe () > > 12:46:14.550 §#6 0x00000000009dbc6c in rte_bus_probe () > > 12:46:14.550 §#7 0x00000000009fa91c in rte_eal_init () > > 12:46:14.617 §#8 0x0000000000425db1 in main () > > 12:46:17.052 §(gdb) quit > > 12:46:17.056 §A debugging session is active. > > 12:46:17.056 § > > 12:46:17.057 § Inferior 1 [process 23180] will be killed. > > > > > > 2. *DPDK 21.05:* > > ./dpdk-testpmd -l 0-5 -n4 -- -i > > 12:46:46.257 §EAL: Detected 6 lcore(s) > > 12:46:46.257 §EAL: Detected 1 NUMA nodes > > 12:46:46.258 §EAL: Detected static linkage of DPDK > > 12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket > > 12:46:46.285 §EAL: Selected IOVA mode 'PA' > > 12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0 > > 12:46:46.288 §EAL: No available 2048 kB hugepages reported > > 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device: > 0000:65:00.0 (socket 0) > > 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the MCP > scratch-pad is not configured > > 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized > > 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not initialized! > > 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not > initialized > > 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW > information > > 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed > > 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-0)]qede probe > failed rc -3 > > 12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used > > 12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not created > > 12:46:46.423 §testpmd: No probed ethernet devices > > 12:46:46.461 §Interactive-mode selected > > 12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>: n=187456, > size=2176, socket=0 > > 12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc > > 12:46:46.540 §Done > > > > > > System Information: > > *ethtool -i p2p1* > driver: qede > version: 8.33.0.20 > *firmware-version: mfw 8.24.44.0 storm 8.33.11.0* > expansion-rom-version: > bus-info: 0000:65:00.0 > supports-statistics: yes > supports-test: yes > supports-eeprom-access: no > supports-register-dump: yes > supports-priv-flags: yes > > > > *ethtool -i p2p2 *driver: qede > version: 8.33.0.20 > firmware-version: mfw 8.24.44.0 storm 8.33.11.0 > expansion-rom-version: > bus-info: 0000:65:00.1 > supports-statistics: yes > supports-test: yes > supports-eeprom-access: no > supports-register-dump: yes > supports-priv-flags: yes > > > > > > *lspci -nn | grep Ether* > > 12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and > subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] > > 12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and > subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] > > 12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp. FastLinQ > QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02) > > 12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp. FastLinQ > QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02) > > > > cd /lib/firmware/qed/ > > ls > > 12:48:27.269 §qed_init_values-8.10.9.0.bin > qed_init_values-8.30.12.0.bin qed_init_values_zipped-8.10.5.0.bin > qed_init_values_zipped-8.33.11.0.bin qed_init_values_zipped-8.7.3.0.bin > > 12:48:27.272 §qed_init_values-8.14.6.0.bin > qed_init_values-8.33.12.0.bin qed_init_values_zipped-8.15.3.0.bin > qed_init_values_zipped-8.37.2.0.bin > > 12:48:27.273 §qed_init_values-8.18.9.0.bin > qed_init_values-8.40.33.0.bin qed_init_values_zipped-8.20.0.0.bin > qed_init_values_zipped-8.37.7.0.bin > > 12:48:27.275 §qed_init_values-8.20.0.0.bin > qed_init_values_zipped-8.10.10.0.bin qed_init_values_zipped-8.33.1.0.bin > qed_init_values_zipped-8.4.2.0.bin > > > Best Regards > > Puneet > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-users] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000 2021-05-26 4:13 ` Nishant Verma @ 2021-05-26 4:20 ` Truring Team 2021-05-26 4:35 ` Nishant Verma 0 siblings, 1 reply; 7+ messages in thread From: Truring Team @ 2021-05-26 4:20 UTC (permalink / raw) To: Nishant Verma; +Cc: dev, USERS Hi Nishant, cat /proc/meminfo 11:59:29.200 §MemTotal: 23101672 kB 11:59:29.200 §MemFree: 15254764 kB 11:59:29.200 §MemAvailable: 19243184 kB 11:59:29.200 §Buffers: 6792 kB 11:59:29.201 §Cached: 4084844 kB 11:59:29.201 §SwapCached: 0 kB 11:59:29.201 §Active: 3609016 kB 11:59:29.201 §Inactive: 1175160 kB 11:59:29.201 §Active(anon): 695644 kB 11:59:29.202 §Inactive(anon): 19716 kB 11:59:29.202 §Active(file): 2913372 kB 11:59:29.202 §Inactive(file): 1155444 kB 11:59:29.202 §Unevictable: 0 kB 11:59:29.202 §Mlocked: 0 kB 11:59:29.203 §SwapTotal: 11665404 kB 11:59:29.204 §SwapFree: 11665404 kB 11:59:29.204 §Dirty: 32 kB 11:59:29.204 §Writeback: 0 kB 11:59:29.204 §AnonPages: 694764 kB 11:59:29.205 §Mapped: 140220 kB 11:59:29.205 §Shmem: 22800 kB 11:59:29.205 §Slab: 445016 kB 11:59:29.205 §SReclaimable: 289968 kB 11:59:29.205 §SUnreclaim: 155048 kB 11:59:29.206 §KernelStack: 16624 kB 11:59:29.206 §PageTables: 35892 kB 11:59:29.206 §NFS_Unstable: 0 kB 11:59:29.206 §Bounce: 0 kB 11:59:29.206 §WritebackTmp: 0 kB 11:59:29.207 §CommitLimit: 22167664 kB 11:59:29.207 §Committed_AS: 4342668 kB 11:59:29.207 §VmallocTotal: 34359738367 kB 11:59:29.207 §VmallocUsed: 463188 kB 11:59:29.207 §VmallocChunk: 34358835196 kB 11:59:29.208 §HardwareCorrupted: 0 kB 11:59:29.208 §AnonHugePages: 329728 kB 11:59:29.208 §CmaTotal: 0 kB 11:59:29.209 §CmaFree: 0 kB 11:59:29.209 §HugePages_Total: 1024 11:59:29.209 §HugePages_Free: 1019 11:59:29.209 §HugePages_Rsvd: 0 11:59:29.209 §HugePages_Surp: 0 11:59:29.209 §Hugepagesize: 2048 kB 11:59:29.209 §DirectMap4k: 381760 kB 11:59:29.209 §DirectMap2M: 13973504 kB 11:59:29.215 §DirectMap1G: 11534336 kB Regards On Wed, 26 May 2021 at 09:43, Nishant Verma <vnish11@gmail.com> wrote: > Can you paste output of /proc/meminfo ? > > > > Regards, > NV > > On Tue, May 25, 2021 at 9:52 PM Truring Team <truring12@gmail.com> wrote: > >> Hi Team, >> >> I am trying to run the dpdk test-pmd application (DPDK 20.11 and DPDK >> 21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE >> Controller but facing following issues: >> >> If someone can look into the following logs and help me figure out the >> issue? >> >> >> >> 1. DPDK 20.11 ( Using 1 GB hugepages) >> >> gdb ./dpdk-testpmd >> >> 12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7 >> >> 12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc. >> >> 12:45:59.348 §License GPLv3+: GNU GPL version 3 or later >> http://gnu.org/licenses/gpl.html >> >> 12:45:59.349 §This is free software: you are free to change and >> redistribute it. >> >> 12:45:59.349 §There is NO WARRANTY, to the extent permitted by law. Type >> "show copying" >> >> 12:45:59.349 §and "show warranty" for details. >> >> 12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu". >> >> 12:45:59.351 §For bug reporting instructions, please see: >> >> 12:45:59.351 §http://www.gnu.org/software/gdb/bugs/... >> >> 12:45:59.415 §Reading symbols from >> /home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no debugging symbols >> found)...done. >> >> 12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i >> >> 12:46:11.493 §Starting program: >> /home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 -- -i >> >> 12:46:11.717 §[Thread debugging using libthread_db enabled] >> >> 12:46:11.719 §Using host libthread_db library "/lib64/libthread_db.so.1". >> >> 12:46:11.768 §EAL: Detected 6 lcore(s) >> >> 12:46:11.769 §EAL: Detected 1 NUMA nodes >> >> 12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)] >> >> 12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket >> >> 12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)] >> >> 12:46:11.792 §EAL: Selected IOVA mode 'PA' >> >> 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB >> >> 12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB >> >> 12:46:11.854 §EAL: Probing VFIO support... >> >> 12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)] >> >> 12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)] >> >> 12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)] >> >> 12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)] >> >> 12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)] >> >> 12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device: >> 0000:65:00.0 (socket 0) >> >> 12:46:11.915 § >> >> 12:46:11.915 §Program received signal SIGSEGV, Segmentation fault. >> >> 12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc () >> >> 12:46:11.916 §Missing separate debuginfos, use: debuginfo-install >> glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64 >> libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64 >> zlib-1.2.7-19.el7_9.x86_64 >> >> 12:46:14.542 §(gdb) bt >> >> 12:46:14.548 §#0 0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc () >> >> 12:46:14.548 §#1 0x0000000000eb811e in ecore_hw_init () >> >> 12:46:14.549 §#2 0x0000000000ef7397 in qed_slowpath_start () >> >> 12:46:14.549 §#3 0x0000000000ef0483 in qede_common_dev_init () >> >> 12:46:14.549 §#4 0x0000000000ef1113 in qede_eth_dev_pci_probe () >> >> 12:46:14.549 §#5 0x0000000000a4450b in pci_probe () >> >> 12:46:14.550 §#6 0x00000000009dbc6c in rte_bus_probe () >> >> 12:46:14.550 §#7 0x00000000009fa91c in rte_eal_init () >> >> 12:46:14.617 §#8 0x0000000000425db1 in main () >> >> 12:46:17.052 §(gdb) quit >> >> 12:46:17.056 §A debugging session is active. >> >> 12:46:17.056 § >> >> 12:46:17.057 § Inferior 1 [process 23180] will be killed. >> >> >> >> >> >> 2. *DPDK 21.05:* >> >> ./dpdk-testpmd -l 0-5 -n4 -- -i >> >> 12:46:46.257 §EAL: Detected 6 lcore(s) >> >> 12:46:46.257 §EAL: Detected 1 NUMA nodes >> >> 12:46:46.258 §EAL: Detected static linkage of DPDK >> >> 12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket >> >> 12:46:46.285 §EAL: Selected IOVA mode 'PA' >> >> 12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0 >> >> 12:46:46.288 §EAL: No available 2048 kB hugepages reported >> >> 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device: >> 0000:65:00.0 (socket 0) >> >> 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the MCP >> scratch-pad is not configured >> >> 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized >> >> 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not >> initialized! >> >> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not >> initialized >> >> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW >> information >> >> 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed >> >> 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-0)]qede probe >> failed rc -3 >> >> 12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used >> >> 12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not created >> >> 12:46:46.423 §testpmd: No probed ethernet devices >> >> 12:46:46.461 §Interactive-mode selected >> >> 12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>: n=187456, >> size=2176, socket=0 >> >> 12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc >> >> 12:46:46.540 §Done >> >> >> >> >> >> System Information: >> >> *ethtool -i p2p1* >> driver: qede >> version: 8.33.0.20 >> *firmware-version: mfw 8.24.44.0 storm 8.33.11.0* >> expansion-rom-version: >> bus-info: 0000:65:00.0 >> supports-statistics: yes >> supports-test: yes >> supports-eeprom-access: no >> supports-register-dump: yes >> supports-priv-flags: yes >> >> >> >> *ethtool -i p2p2 *driver: qede >> version: 8.33.0.20 >> firmware-version: mfw 8.24.44.0 storm 8.33.11.0 >> expansion-rom-version: >> bus-info: 0000:65:00.1 >> supports-statistics: yes >> supports-test: yes >> supports-eeprom-access: no >> supports-register-dump: yes >> supports-priv-flags: yes >> >> >> >> >> >> *lspci -nn | grep Ether* >> >> 12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and >> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] >> >> 12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and >> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] >> >> 12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp. FastLinQ >> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02) >> >> 12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp. FastLinQ >> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02) >> >> >> >> cd /lib/firmware/qed/ >> >> ls >> >> 12:48:27.269 §qed_init_values-8.10.9.0.bin >> qed_init_values-8.30.12.0.bin qed_init_values_zipped-8.10.5.0.bin >> qed_init_values_zipped-8.33.11.0.bin qed_init_values_zipped-8.7.3.0.bin >> >> 12:48:27.272 §qed_init_values-8.14.6.0.bin >> qed_init_values-8.33.12.0.bin qed_init_values_zipped-8.15.3.0.bin >> qed_init_values_zipped-8.37.2.0.bin >> >> 12:48:27.273 §qed_init_values-8.18.9.0.bin >> qed_init_values-8.40.33.0.bin qed_init_values_zipped-8.20.0.0.bin >> qed_init_values_zipped-8.37.7.0.bin >> >> 12:48:27.275 §qed_init_values-8.20.0.0.bin >> qed_init_values_zipped-8.10.10.0.bin qed_init_values_zipped-8.33.1.0.bin >> qed_init_values_zipped-8.4.2.0.bin >> >> >> Best Regards >> >> Puneet >> > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-users] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000 2021-05-26 4:20 ` Truring Team @ 2021-05-26 4:35 ` Nishant Verma 2021-05-26 4:41 ` Truring Team 0 siblings, 1 reply; 7+ messages in thread From: Nishant Verma @ 2021-05-26 4:35 UTC (permalink / raw) To: Truring Team; +Cc: dev, USERS meminfo states: Hugepagesize: 1048576 kB But in your initial mail you state Hugepage size is 1G. have you configured HugePage via grub.... ? Thanks. Regards, NV On Wed, May 26, 2021 at 12:21 AM Truring Team <truring12@gmail.com> wrote: > Hi Nishant, > > cat /proc/meminfo > 11:59:29.200 §MemTotal: 23101672 kB > 11:59:29.200 §MemFree: 15254764 kB > 11:59:29.200 §MemAvailable: 19243184 kB > 11:59:29.200 §Buffers: 6792 kB > 11:59:29.201 §Cached: 4084844 kB > 11:59:29.201 §SwapCached: 0 kB > 11:59:29.201 §Active: 3609016 kB > 11:59:29.201 §Inactive: 1175160 kB > 11:59:29.201 §Active(anon): 695644 kB > 11:59:29.202 §Inactive(anon): 19716 kB > 11:59:29.202 §Active(file): 2913372 kB > 11:59:29.202 §Inactive(file): 1155444 kB > 11:59:29.202 §Unevictable: 0 kB > 11:59:29.202 §Mlocked: 0 kB > 11:59:29.203 §SwapTotal: 11665404 kB > 11:59:29.204 §SwapFree: 11665404 kB > 11:59:29.204 §Dirty: 32 kB > 11:59:29.204 §Writeback: 0 kB > 11:59:29.204 §AnonPages: 694764 kB > 11:59:29.205 §Mapped: 140220 kB > 11:59:29.205 §Shmem: 22800 kB > 11:59:29.205 §Slab: 445016 kB > 11:59:29.205 §SReclaimable: 289968 kB > 11:59:29.205 §SUnreclaim: 155048 kB > 11:59:29.206 §KernelStack: 16624 kB > 11:59:29.206 §PageTables: 35892 kB > 11:59:29.206 §NFS_Unstable: 0 kB > 11:59:29.206 §Bounce: 0 kB > 11:59:29.206 §WritebackTmp: 0 kB > 11:59:29.207 §CommitLimit: 22167664 kB > 11:59:29.207 §Committed_AS: 4342668 kB > 11:59:29.207 §VmallocTotal: 34359738367 kB > 11:59:29.207 §VmallocUsed: 463188 kB > 11:59:29.207 §VmallocChunk: 34358835196 kB > 11:59:29.208 §HardwareCorrupted: 0 kB > 11:59:29.208 §AnonHugePages: 329728 kB > 11:59:29.208 §CmaTotal: 0 kB > 11:59:29.209 §CmaFree: 0 kB > 11:59:29.209 §HugePages_Total: 1024 > 11:59:29.209 §HugePages_Free: 1019 > 11:59:29.209 §HugePages_Rsvd: 0 > 11:59:29.209 §HugePages_Surp: 0 > 11:59:29.209 §Hugepagesize: 2048 kB > 11:59:29.209 §DirectMap4k: 381760 kB > 11:59:29.209 §DirectMap2M: 13973504 kB > 11:59:29.215 §DirectMap1G: 11534336 kB > > Regards > > > On Wed, 26 May 2021 at 09:43, Nishant Verma <vnish11@gmail.com> wrote: > >> Can you paste output of /proc/meminfo ? >> >> >> >> Regards, >> NV >> >> On Tue, May 25, 2021 at 9:52 PM Truring Team <truring12@gmail.com> wrote: >> >>> Hi Team, >>> >>> I am trying to run the dpdk test-pmd application (DPDK 20.11 and DPDK >>> 21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE >>> Controller but facing following issues: >>> >>> If someone can look into the following logs and help me figure out the >>> issue? >>> >>> >>> >>> 1. DPDK 20.11 ( Using 1 GB hugepages) >>> >>> gdb ./dpdk-testpmd >>> >>> 12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7 >>> >>> 12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc. >>> >>> 12:45:59.348 §License GPLv3+: GNU GPL version 3 or later >>> http://gnu.org/licenses/gpl.html >>> >>> 12:45:59.349 §This is free software: you are free to change and >>> redistribute it. >>> >>> 12:45:59.349 §There is NO WARRANTY, to the extent permitted by law. Type >>> "show copying" >>> >>> 12:45:59.349 §and "show warranty" for details. >>> >>> 12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu". >>> >>> 12:45:59.351 §For bug reporting instructions, please see: >>> >>> 12:45:59.351 §http://www.gnu.org/software/gdb/bugs/... >>> >>> 12:45:59.415 §Reading symbols from >>> /home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no debugging symbols >>> found)...done. >>> >>> 12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i >>> >>> 12:46:11.493 §Starting program: >>> /home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 -- -i >>> >>> 12:46:11.717 §[Thread debugging using libthread_db enabled] >>> >>> 12:46:11.719 §Using host libthread_db library "/lib64/libthread_db.so.1". >>> >>> 12:46:11.768 §EAL: Detected 6 lcore(s) >>> >>> 12:46:11.769 §EAL: Detected 1 NUMA nodes >>> >>> 12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)] >>> >>> 12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket >>> >>> 12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)] >>> >>> 12:46:11.792 §EAL: Selected IOVA mode 'PA' >>> >>> 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB >>> >>> 12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB >>> >>> 12:46:11.854 §EAL: Probing VFIO support... >>> >>> 12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)] >>> >>> 12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)] >>> >>> 12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)] >>> >>> 12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)] >>> >>> 12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)] >>> >>> 12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device: >>> 0000:65:00.0 (socket 0) >>> >>> 12:46:11.915 § >>> >>> 12:46:11.915 §Program received signal SIGSEGV, Segmentation fault. >>> >>> 12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc () >>> >>> 12:46:11.916 §Missing separate debuginfos, use: debuginfo-install >>> glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64 >>> libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64 >>> zlib-1.2.7-19.el7_9.x86_64 >>> >>> 12:46:14.542 §(gdb) bt >>> >>> 12:46:14.548 §#0 0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc () >>> >>> 12:46:14.548 §#1 0x0000000000eb811e in ecore_hw_init () >>> >>> 12:46:14.549 §#2 0x0000000000ef7397 in qed_slowpath_start () >>> >>> 12:46:14.549 §#3 0x0000000000ef0483 in qede_common_dev_init () >>> >>> 12:46:14.549 §#4 0x0000000000ef1113 in qede_eth_dev_pci_probe () >>> >>> 12:46:14.549 §#5 0x0000000000a4450b in pci_probe () >>> >>> 12:46:14.550 §#6 0x00000000009dbc6c in rte_bus_probe () >>> >>> 12:46:14.550 §#7 0x00000000009fa91c in rte_eal_init () >>> >>> 12:46:14.617 §#8 0x0000000000425db1 in main () >>> >>> 12:46:17.052 §(gdb) quit >>> >>> 12:46:17.056 §A debugging session is active. >>> >>> 12:46:17.056 § >>> >>> 12:46:17.057 § Inferior 1 [process 23180] will be killed. >>> >>> >>> >>> >>> >>> 2. *DPDK 21.05:* >>> >>> ./dpdk-testpmd -l 0-5 -n4 -- -i >>> >>> 12:46:46.257 §EAL: Detected 6 lcore(s) >>> >>> 12:46:46.257 §EAL: Detected 1 NUMA nodes >>> >>> 12:46:46.258 §EAL: Detected static linkage of DPDK >>> >>> 12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket >>> >>> 12:46:46.285 §EAL: Selected IOVA mode 'PA' >>> >>> 12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0 >>> >>> 12:46:46.288 §EAL: No available 2048 kB hugepages reported >>> >>> 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device: >>> 0000:65:00.0 (socket 0) >>> >>> 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the MCP >>> scratch-pad is not configured >>> >>> 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized >>> >>> 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not >>> initialized! >>> >>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not >>> initialized >>> >>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW >>> information >>> >>> 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed >>> >>> 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-0)]qede probe >>> failed rc -3 >>> >>> 12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used >>> >>> 12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not created >>> >>> 12:46:46.423 §testpmd: No probed ethernet devices >>> >>> 12:46:46.461 §Interactive-mode selected >>> >>> 12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>: n=187456, >>> size=2176, socket=0 >>> >>> 12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc >>> >>> 12:46:46.540 §Done >>> >>> >>> >>> >>> >>> System Information: >>> >>> *ethtool -i p2p1* >>> driver: qede >>> version: 8.33.0.20 >>> *firmware-version: mfw 8.24.44.0 storm 8.33.11.0* >>> expansion-rom-version: >>> bus-info: 0000:65:00.0 >>> supports-statistics: yes >>> supports-test: yes >>> supports-eeprom-access: no >>> supports-register-dump: yes >>> supports-priv-flags: yes >>> >>> >>> >>> *ethtool -i p2p2 *driver: qede >>> version: 8.33.0.20 >>> firmware-version: mfw 8.24.44.0 storm 8.33.11.0 >>> expansion-rom-version: >>> bus-info: 0000:65:00.1 >>> supports-statistics: yes >>> supports-test: yes >>> supports-eeprom-access: no >>> supports-register-dump: yes >>> supports-priv-flags: yes >>> >>> >>> >>> >>> >>> *lspci -nn | grep Ether* >>> >>> 12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and >>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] >>> >>> 12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and >>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] >>> >>> 12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp. FastLinQ >>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02) >>> >>> 12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp. FastLinQ >>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02) >>> >>> >>> >>> cd /lib/firmware/qed/ >>> >>> ls >>> >>> 12:48:27.269 §qed_init_values-8.10.9.0.bin >>> qed_init_values-8.30.12.0.bin qed_init_values_zipped-8.10.5.0.bin >>> qed_init_values_zipped-8.33.11.0.bin qed_init_values_zipped-8.7.3.0.bin >>> >>> 12:48:27.272 §qed_init_values-8.14.6.0.bin >>> qed_init_values-8.33.12.0.bin qed_init_values_zipped-8.15.3.0.bin >>> qed_init_values_zipped-8.37.2.0.bin >>> >>> 12:48:27.273 §qed_init_values-8.18.9.0.bin >>> qed_init_values-8.40.33.0.bin qed_init_values_zipped-8.20.0.0.bin >>> qed_init_values_zipped-8.37.7.0.bin >>> >>> 12:48:27.275 §qed_init_values-8.20.0.0.bin >>> qed_init_values_zipped-8.10.10.0.bin qed_init_values_zipped-8.33.1.0.bin >>> qed_init_values_zipped-8.4.2.0.bin >>> >>> >>> Best Regards >>> >>> Puneet >>> >> ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-users] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000 2021-05-26 4:35 ` Nishant Verma @ 2021-05-26 4:41 ` Truring Team 2021-05-26 9:57 ` [dpdk-users] [dpdk-dev] " Varghese, Vipin 0 siblings, 1 reply; 7+ messages in thread From: Truring Team @ 2021-05-26 4:41 UTC (permalink / raw) To: Nishant Verma; +Cc: dev, USERS Yes , I have configured it via grub. Grub: "default_hugepagesz=1G hugepagesz=1G hugepages=2" grub2-mkconfig -o /boot/grub2/grub.cfg Manual: mkdir /dev/hugepages1G mount -t hugetlbfs -o pagesize=1G none /dev/hugepages1G echo 2 > /sys/devices/system/node/node1/hugepages/hugepages-1048576kB/nr_hugepages Regards Puneet On Wed, 26 May 2021 at 10:05, Nishant Verma <vnish11@gmail.com> wrote: > meminfo states: Hugepagesize: 1048576 kB > But in your initial mail you state Hugepage size is 1G. > > have you configured HugePage via grub.... ? > > > Thanks. > > Regards, > NV > > On Wed, May 26, 2021 at 12:21 AM Truring Team <truring12@gmail.com> wrote: > >> Hi Nishant, >> >> cat /proc/meminfo >> 11:59:29.200 §MemTotal: 23101672 kB >> 11:59:29.200 §MemFree: 15254764 kB >> 11:59:29.200 §MemAvailable: 19243184 kB >> 11:59:29.200 §Buffers: 6792 kB >> 11:59:29.201 §Cached: 4084844 kB >> 11:59:29.201 §SwapCached: 0 kB >> 11:59:29.201 §Active: 3609016 kB >> 11:59:29.201 §Inactive: 1175160 kB >> 11:59:29.201 §Active(anon): 695644 kB >> 11:59:29.202 §Inactive(anon): 19716 kB >> 11:59:29.202 §Active(file): 2913372 kB >> 11:59:29.202 §Inactive(file): 1155444 kB >> 11:59:29.202 §Unevictable: 0 kB >> 11:59:29.202 §Mlocked: 0 kB >> 11:59:29.203 §SwapTotal: 11665404 kB >> 11:59:29.204 §SwapFree: 11665404 kB >> 11:59:29.204 §Dirty: 32 kB >> 11:59:29.204 §Writeback: 0 kB >> 11:59:29.204 §AnonPages: 694764 kB >> 11:59:29.205 §Mapped: 140220 kB >> 11:59:29.205 §Shmem: 22800 kB >> 11:59:29.205 §Slab: 445016 kB >> 11:59:29.205 §SReclaimable: 289968 kB >> 11:59:29.205 §SUnreclaim: 155048 kB >> 11:59:29.206 §KernelStack: 16624 kB >> 11:59:29.206 §PageTables: 35892 kB >> 11:59:29.206 §NFS_Unstable: 0 kB >> 11:59:29.206 §Bounce: 0 kB >> 11:59:29.206 §WritebackTmp: 0 kB >> 11:59:29.207 §CommitLimit: 22167664 kB >> 11:59:29.207 §Committed_AS: 4342668 kB >> 11:59:29.207 §VmallocTotal: 34359738367 kB >> 11:59:29.207 §VmallocUsed: 463188 kB >> 11:59:29.207 §VmallocChunk: 34358835196 kB >> 11:59:29.208 §HardwareCorrupted: 0 kB >> 11:59:29.208 §AnonHugePages: 329728 kB >> 11:59:29.208 §CmaTotal: 0 kB >> 11:59:29.209 §CmaFree: 0 kB >> 11:59:29.209 §HugePages_Total: 1024 >> 11:59:29.209 §HugePages_Free: 1019 >> 11:59:29.209 §HugePages_Rsvd: 0 >> 11:59:29.209 §HugePages_Surp: 0 >> 11:59:29.209 §Hugepagesize: 2048 kB >> 11:59:29.209 §DirectMap4k: 381760 kB >> 11:59:29.209 §DirectMap2M: 13973504 kB >> 11:59:29.215 §DirectMap1G: 11534336 kB >> >> Regards >> >> >> On Wed, 26 May 2021 at 09:43, Nishant Verma <vnish11@gmail.com> wrote: >> >>> Can you paste output of /proc/meminfo ? >>> >>> >>> >>> Regards, >>> NV >>> >>> On Tue, May 25, 2021 at 9:52 PM Truring Team <truring12@gmail.com> >>> wrote: >>> >>>> Hi Team, >>>> >>>> I am trying to run the dpdk test-pmd application (DPDK 20.11 and DPDK >>>> 21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE >>>> Controller but facing following issues: >>>> >>>> If someone can look into the following logs and help me figure out the >>>> issue? >>>> >>>> >>>> >>>> 1. DPDK 20.11 ( Using 1 GB hugepages) >>>> >>>> gdb ./dpdk-testpmd >>>> >>>> 12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7 >>>> >>>> 12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc. >>>> >>>> 12:45:59.348 §License GPLv3+: GNU GPL version 3 or later >>>> http://gnu.org/licenses/gpl.html >>>> >>>> 12:45:59.349 §This is free software: you are free to change and >>>> redistribute it. >>>> >>>> 12:45:59.349 §There is NO WARRANTY, to the extent permitted by law. >>>> Type >>>> "show copying" >>>> >>>> 12:45:59.349 §and "show warranty" for details. >>>> >>>> 12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu". >>>> >>>> 12:45:59.351 §For bug reporting instructions, please see: >>>> >>>> 12:45:59.351 §http://www.gnu.org/software/gdb/bugs/... >>>> >>>> 12:45:59.415 §Reading symbols from >>>> /home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no debugging >>>> symbols >>>> found)...done. >>>> >>>> 12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i >>>> >>>> 12:46:11.493 §Starting program: >>>> /home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 -- -i >>>> >>>> 12:46:11.717 §[Thread debugging using libthread_db enabled] >>>> >>>> 12:46:11.719 §Using host libthread_db library >>>> "/lib64/libthread_db.so.1". >>>> >>>> 12:46:11.768 §EAL: Detected 6 lcore(s) >>>> >>>> 12:46:11.769 §EAL: Detected 1 NUMA nodes >>>> >>>> 12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)] >>>> >>>> 12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket >>>> >>>> 12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)] >>>> >>>> 12:46:11.792 §EAL: Selected IOVA mode 'PA' >>>> >>>> 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB >>>> >>>> 12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB >>>> >>>> 12:46:11.854 §EAL: Probing VFIO support... >>>> >>>> 12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)] >>>> >>>> 12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)] >>>> >>>> 12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)] >>>> >>>> 12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)] >>>> >>>> 12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)] >>>> >>>> 12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device: >>>> 0000:65:00.0 (socket 0) >>>> >>>> 12:46:11.915 § >>>> >>>> 12:46:11.915 §Program received signal SIGSEGV, Segmentation fault. >>>> >>>> 12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc () >>>> >>>> 12:46:11.916 §Missing separate debuginfos, use: debuginfo-install >>>> glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64 >>>> libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64 >>>> zlib-1.2.7-19.el7_9.x86_64 >>>> >>>> 12:46:14.542 §(gdb) bt >>>> >>>> 12:46:14.548 §#0 0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc () >>>> >>>> 12:46:14.548 §#1 0x0000000000eb811e in ecore_hw_init () >>>> >>>> 12:46:14.549 §#2 0x0000000000ef7397 in qed_slowpath_start () >>>> >>>> 12:46:14.549 §#3 0x0000000000ef0483 in qede_common_dev_init () >>>> >>>> 12:46:14.549 §#4 0x0000000000ef1113 in qede_eth_dev_pci_probe () >>>> >>>> 12:46:14.549 §#5 0x0000000000a4450b in pci_probe () >>>> >>>> 12:46:14.550 §#6 0x00000000009dbc6c in rte_bus_probe () >>>> >>>> 12:46:14.550 §#7 0x00000000009fa91c in rte_eal_init () >>>> >>>> 12:46:14.617 §#8 0x0000000000425db1 in main () >>>> >>>> 12:46:17.052 §(gdb) quit >>>> >>>> 12:46:17.056 §A debugging session is active. >>>> >>>> 12:46:17.056 § >>>> >>>> 12:46:17.057 § Inferior 1 [process 23180] will be killed. >>>> >>>> >>>> >>>> >>>> >>>> 2. *DPDK 21.05:* >>>> >>>> ./dpdk-testpmd -l 0-5 -n4 -- -i >>>> >>>> 12:46:46.257 §EAL: Detected 6 lcore(s) >>>> >>>> 12:46:46.257 §EAL: Detected 1 NUMA nodes >>>> >>>> 12:46:46.258 §EAL: Detected static linkage of DPDK >>>> >>>> 12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket >>>> >>>> 12:46:46.285 §EAL: Selected IOVA mode 'PA' >>>> >>>> 12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0 >>>> >>>> 12:46:46.288 §EAL: No available 2048 kB hugepages reported >>>> >>>> 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device: >>>> 0000:65:00.0 (socket 0) >>>> >>>> 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the >>>> MCP >>>> scratch-pad is not configured >>>> >>>> 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized >>>> >>>> 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not >>>> initialized! >>>> >>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not >>>> initialized >>>> >>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW >>>> information >>>> >>>> 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed >>>> >>>> 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-0)]qede probe >>>> failed rc -3 >>>> >>>> 12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used >>>> >>>> 12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not created >>>> >>>> 12:46:46.423 §testpmd: No probed ethernet devices >>>> >>>> 12:46:46.461 §Interactive-mode selected >>>> >>>> 12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>: n=187456, >>>> size=2176, socket=0 >>>> >>>> 12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc >>>> >>>> 12:46:46.540 §Done >>>> >>>> >>>> >>>> >>>> >>>> System Information: >>>> >>>> *ethtool -i p2p1* >>>> driver: qede >>>> version: 8.33.0.20 >>>> *firmware-version: mfw 8.24.44.0 storm 8.33.11.0* >>>> expansion-rom-version: >>>> bus-info: 0000:65:00.0 >>>> supports-statistics: yes >>>> supports-test: yes >>>> supports-eeprom-access: no >>>> supports-register-dump: yes >>>> supports-priv-flags: yes >>>> >>>> >>>> >>>> *ethtool -i p2p2 *driver: qede >>>> version: 8.33.0.20 >>>> firmware-version: mfw 8.24.44.0 storm 8.33.11.0 >>>> expansion-rom-version: >>>> bus-info: 0000:65:00.1 >>>> supports-statistics: yes >>>> supports-test: yes >>>> supports-eeprom-access: no >>>> supports-register-dump: yes >>>> supports-priv-flags: yes >>>> >>>> >>>> >>>> >>>> >>>> *lspci -nn | grep Ether* >>>> >>>> 12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and >>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] >>>> >>>> 12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and >>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] >>>> >>>> 12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp. FastLinQ >>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02) >>>> >>>> 12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp. FastLinQ >>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02) >>>> >>>> >>>> >>>> cd /lib/firmware/qed/ >>>> >>>> ls >>>> >>>> 12:48:27.269 §qed_init_values-8.10.9.0.bin >>>> qed_init_values-8.30.12.0.bin >>>> qed_init_values_zipped-8.10.5.0.bin >>>> qed_init_values_zipped-8.33.11.0.bin qed_init_values_zipped-8.7.3.0.bin >>>> >>>> 12:48:27.272 §qed_init_values-8.14.6.0.bin >>>> qed_init_values-8.33.12.0.bin >>>> qed_init_values_zipped-8.15.3.0.bin >>>> qed_init_values_zipped-8.37.2.0.bin >>>> >>>> 12:48:27.273 §qed_init_values-8.18.9.0.bin >>>> qed_init_values-8.40.33.0.bin >>>> qed_init_values_zipped-8.20.0.0.bin >>>> qed_init_values_zipped-8.37.7.0.bin >>>> >>>> 12:48:27.275 §qed_init_values-8.20.0.0.bin >>>> qed_init_values_zipped-8.10.10.0.bin >>>> qed_init_values_zipped-8.33.1.0.bin >>>> qed_init_values_zipped-8.4.2.0.bin >>>> >>>> >>>> Best Regards >>>> >>>> Puneet >>>> >>> ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-users] [dpdk-dev] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000 2021-05-26 4:41 ` Truring Team @ 2021-05-26 9:57 ` Varghese, Vipin 2021-06-01 13:00 ` [dpdk-users] [EXT] " Igor Russkikh 0 siblings, 1 reply; 7+ messages in thread From: Varghese, Vipin @ 2021-05-26 9:57 UTC (permalink / raw) To: Truring Team, Nishant Verma; +Cc: dev, USERS Based on the logs shared from `Turing Team`, the observation is as follows 1. 1GB huge pages are used in the application ```logs 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB 12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB ``` 2. Issue comes right at `device porbe to initialize` ```logs 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device: 0000:65:00.0 (socket 0) 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the MCP scratch-pad is not configured 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not initialized! 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not initialized 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW information 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-> 0)]qede probe failed rc -3 ``` Hence in my opinion this is related to NIC in use and how it is getting initialized. So please try to debug driver > -----Original Message----- > From: dev <dev-bounces@dpdk.org> On Behalf Of Truring Team > Sent: Wednesday, May 26, 2021 10:12 AM > To: Nishant Verma <vnish11@gmail.com> > Cc: dev@dpdk.org; USERS <users@dpdk.org> > Subject: Re: [dpdk-dev] [dpdk-users] DPDK issue with Marvell NIC QLogic > Corp. FastLinQ QL41000 > > Yes , I have configured it via grub. > > Grub: > "default_hugepagesz=1G hugepagesz=1G hugepages=2" > grub2-mkconfig -o /boot/grub2/grub.cfg > > Manual: > mkdir /dev/hugepages1G > mount -t hugetlbfs -o pagesize=1G none /dev/hugepages1G echo 2 > > /sys/devices/system/node/node1/hugepages/hugepages- > 1048576kB/nr_hugepages > > Regards > Puneet > > On Wed, 26 May 2021 at 10:05, Nishant Verma <vnish11@gmail.com> wrote: > > > meminfo states: Hugepagesize: 1048576 kB > > But in your initial mail you state Hugepage size is 1G. > > > > have you configured HugePage via grub.... ? > > > > > > Thanks. > > > > Regards, > > NV > > > > On Wed, May 26, 2021 at 12:21 AM Truring Team <truring12@gmail.com> > wrote: > > > >> Hi Nishant, > >> > >> cat /proc/meminfo > >> 11:59:29.200 §MemTotal: 23101672 kB > >> 11:59:29.200 §MemFree: 15254764 kB > >> 11:59:29.200 §MemAvailable: 19243184 kB > >> 11:59:29.200 §Buffers: 6792 kB > >> 11:59:29.201 §Cached: 4084844 kB > >> 11:59:29.201 §SwapCached: 0 kB > >> 11:59:29.201 §Active: 3609016 kB > >> 11:59:29.201 §Inactive: 1175160 kB > >> 11:59:29.201 §Active(anon): 695644 kB > >> 11:59:29.202 §Inactive(anon): 19716 kB > >> 11:59:29.202 §Active(file): 2913372 kB > >> 11:59:29.202 §Inactive(file): 1155444 kB > >> 11:59:29.202 §Unevictable: 0 kB > >> 11:59:29.202 §Mlocked: 0 kB > >> 11:59:29.203 §SwapTotal: 11665404 kB > >> 11:59:29.204 §SwapFree: 11665404 kB > >> 11:59:29.204 §Dirty: 32 kB > >> 11:59:29.204 §Writeback: 0 kB > >> 11:59:29.204 §AnonPages: 694764 kB > >> 11:59:29.205 §Mapped: 140220 kB > >> 11:59:29.205 §Shmem: 22800 kB > >> 11:59:29.205 §Slab: 445016 kB > >> 11:59:29.205 §SReclaimable: 289968 kB > >> 11:59:29.205 §SUnreclaim: 155048 kB > >> 11:59:29.206 §KernelStack: 16624 kB > >> 11:59:29.206 §PageTables: 35892 kB > >> 11:59:29.206 §NFS_Unstable: 0 kB > >> 11:59:29.206 §Bounce: 0 kB > >> 11:59:29.206 §WritebackTmp: 0 kB > >> 11:59:29.207 §CommitLimit: 22167664 kB > >> 11:59:29.207 §Committed_AS: 4342668 kB > >> 11:59:29.207 §VmallocTotal: 34359738367 kB > >> 11:59:29.207 §VmallocUsed: 463188 kB > >> 11:59:29.207 §VmallocChunk: 34358835196 kB > >> 11:59:29.208 §HardwareCorrupted: 0 kB > >> 11:59:29.208 §AnonHugePages: 329728 kB > >> 11:59:29.208 §CmaTotal: 0 kB > >> 11:59:29.209 §CmaFree: 0 kB > >> 11:59:29.209 §HugePages_Total: 1024 > >> 11:59:29.209 §HugePages_Free: 1019 > >> 11:59:29.209 §HugePages_Rsvd: 0 > >> 11:59:29.209 §HugePages_Surp: 0 > >> 11:59:29.209 §Hugepagesize: 2048 kB > >> 11:59:29.209 §DirectMap4k: 381760 kB > >> 11:59:29.209 §DirectMap2M: 13973504 kB > >> 11:59:29.215 §DirectMap1G: 11534336 kB > >> > >> Regards > >> > >> > >> On Wed, 26 May 2021 at 09:43, Nishant Verma <vnish11@gmail.com> > wrote: > >> > >>> Can you paste output of /proc/meminfo ? > >>> > >>> > >>> > >>> Regards, > >>> NV > >>> > >>> On Tue, May 25, 2021 at 9:52 PM Truring Team <truring12@gmail.com> > >>> wrote: > >>> > >>>> Hi Team, > >>>> > >>>> I am trying to run the dpdk test-pmd application (DPDK 20.11 and > >>>> DPDK > >>>> 21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE > >>>> Controller but facing following issues: > >>>> > >>>> If someone can look into the following logs and help me figure out > >>>> the issue? > >>>> > >>>> > >>>> > >>>> 1. DPDK 20.11 ( Using 1 GB hugepages) > >>>> > >>>> gdb ./dpdk-testpmd > >>>> > >>>> 12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7 > >>>> > >>>> 12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc. > >>>> > >>>> 12:45:59.348 §License GPLv3+: GNU GPL version 3 or later > >>>> http://gnu.org/licenses/gpl.html > >>>> > >>>> 12:45:59.349 §This is free software: you are free to change and > >>>> redistribute it. > >>>> > >>>> 12:45:59.349 §There is NO WARRANTY, to the extent permitted by law. > >>>> Type > >>>> "show copying" > >>>> > >>>> 12:45:59.349 §and "show warranty" for details. > >>>> > >>>> 12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu". > >>>> > >>>> 12:45:59.351 §For bug reporting instructions, please see: > >>>> > >>>> 12:45:59.351 §http://www.gnu.org/software/gdb/bugs/... > >>>> > >>>> 12:45:59.415 §Reading symbols from > >>>> /home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no > debugging > >>>> symbols found)...done. > >>>> > >>>> 12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i > >>>> > >>>> 12:46:11.493 §Starting program: > >>>> /home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 -- > >>>> -i > >>>> > >>>> 12:46:11.717 §[Thread debugging using libthread_db enabled] > >>>> > >>>> 12:46:11.719 §Using host libthread_db library > >>>> "/lib64/libthread_db.so.1". > >>>> > >>>> 12:46:11.768 §EAL: Detected 6 lcore(s) > >>>> > >>>> 12:46:11.769 §EAL: Detected 1 NUMA nodes > >>>> > >>>> 12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)] > >>>> > >>>> 12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket > >>>> > >>>> 12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)] > >>>> > >>>> 12:46:11.792 §EAL: Selected IOVA mode 'PA' > >>>> > >>>> 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB > >>>> > >>>> 12:46:11.792 §EAL: No available hugepages reported in > >>>> hugepages-2048kB > >>>> > >>>> 12:46:11.854 §EAL: Probing VFIO support... > >>>> > >>>> 12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)] > >>>> > >>>> 12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)] > >>>> > >>>> 12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)] > >>>> > >>>> 12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)] > >>>> > >>>> 12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)] > >>>> > >>>> 12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device: > >>>> 0000:65:00.0 (socket 0) > >>>> > >>>> 12:46:11.915 § > >>>> > >>>> 12:46:11.915 §Program received signal SIGSEGV, Segmentation fault. > >>>> > >>>> 12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc () > >>>> > >>>> 12:46:11.916 §Missing separate debuginfos, use: debuginfo-install > >>>> glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64 > >>>> libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64 > >>>> zlib-1.2.7-19.el7_9.x86_64 > >>>> > >>>> 12:46:14.542 §(gdb) bt > >>>> > >>>> 12:46:14.548 §#0 0x0000000000ec5b20 in > ecore_fw_overlay_mem_alloc > >>>> () > >>>> > >>>> 12:46:14.548 §#1 0x0000000000eb811e in ecore_hw_init () > >>>> > >>>> 12:46:14.549 §#2 0x0000000000ef7397 in qed_slowpath_start () > >>>> > >>>> 12:46:14.549 §#3 0x0000000000ef0483 in qede_common_dev_init () > >>>> > >>>> 12:46:14.549 §#4 0x0000000000ef1113 in qede_eth_dev_pci_probe () > >>>> > >>>> 12:46:14.549 §#5 0x0000000000a4450b in pci_probe () > >>>> > >>>> 12:46:14.550 §#6 0x00000000009dbc6c in rte_bus_probe () > >>>> > >>>> 12:46:14.550 §#7 0x00000000009fa91c in rte_eal_init () > >>>> > >>>> 12:46:14.617 §#8 0x0000000000425db1 in main () > >>>> > >>>> 12:46:17.052 §(gdb) quit > >>>> > >>>> 12:46:17.056 §A debugging session is active. > >>>> > >>>> 12:46:17.056 § > >>>> > >>>> 12:46:17.057 § Inferior 1 [process 23180] will be killed. > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> 2. *DPDK 21.05:* > >>>> > >>>> ./dpdk-testpmd -l 0-5 -n4 -- -i > >>>> > >>>> 12:46:46.257 §EAL: Detected 6 lcore(s) > >>>> > >>>> 12:46:46.257 §EAL: Detected 1 NUMA nodes > >>>> > >>>> 12:46:46.258 §EAL: Detected static linkage of DPDK > >>>> > >>>> 12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket > >>>> > >>>> 12:46:46.285 §EAL: Selected IOVA mode 'PA' > >>>> > >>>> 12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0 > >>>> > >>>> 12:46:46.288 §EAL: No available 2048 kB hugepages reported > >>>> > >>>> 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device: > >>>> 0000:65:00.0 (socket 0) > >>>> > >>>> 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of > >>>> the MCP scratch-pad is not configured > >>>> > >>>> 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not > >>>> initialized > >>>> > >>>> 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not > >>>> initialized! > >>>> > >>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared > memory not > >>>> initialized > >>>> > >>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get > >>>> HW information > >>>> > >>>> 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed > >>>> > >>>> 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port- > 0)]qede > >>>> probe failed rc -3 > >>>> > >>>> 12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used > >>>> > >>>> 12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not > >>>> created > >>>> > >>>> 12:46:46.423 §testpmd: No probed ethernet devices > >>>> > >>>> 12:46:46.461 §Interactive-mode selected > >>>> > >>>> 12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>: > >>>> n=187456, size=2176, socket=0 > >>>> > >>>> 12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc > >>>> > >>>> 12:46:46.540 §Done > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> System Information: > >>>> > >>>> *ethtool -i p2p1* > >>>> driver: qede > >>>> version: 8.33.0.20 > >>>> *firmware-version: mfw 8.24.44.0 storm 8.33.11.0* > >>>> expansion-rom-version: > >>>> bus-info: 0000:65:00.0 > >>>> supports-statistics: yes > >>>> supports-test: yes > >>>> supports-eeprom-access: no > >>>> supports-register-dump: yes > >>>> supports-priv-flags: yes > >>>> > >>>> > >>>> > >>>> *ethtool -i p2p2 *driver: qede > >>>> version: 8.33.0.20 > >>>> firmware-version: mfw 8.24.44.0 storm 8.33.11.0 > >>>> expansion-rom-version: > >>>> bus-info: 0000:65:00.1 > >>>> supports-statistics: yes > >>>> supports-test: yes > >>>> supports-eeprom-access: no > >>>> supports-register-dump: yes > >>>> supports-priv-flags: yes > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> *lspci -nn | grep Ether* > >>>> > >>>> 12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and > >>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] > >>>> > >>>> 12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and > >>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] > >>>> > >>>> 12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp. > >>>> FastLinQ > >>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02) > >>>> > >>>> 12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp. > >>>> FastLinQ > >>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02) > >>>> > >>>> > >>>> > >>>> cd /lib/firmware/qed/ > >>>> > >>>> ls > >>>> > >>>> 12:48:27.269 §qed_init_values-8.10.9.0.bin > >>>> qed_init_values-8.30.12.0.bin qed_init_values_zipped-8.10.5.0.bin > >>>> qed_init_values_zipped-8.33.11.0.bin > >>>> qed_init_values_zipped-8.7.3.0.bin > >>>> > >>>> 12:48:27.272 §qed_init_values-8.14.6.0.bin > >>>> qed_init_values-8.33.12.0.bin qed_init_values_zipped-8.15.3.0.bin > >>>> qed_init_values_zipped-8.37.2.0.bin > >>>> > >>>> 12:48:27.273 §qed_init_values-8.18.9.0.bin > >>>> qed_init_values-8.40.33.0.bin qed_init_values_zipped-8.20.0.0.bin > >>>> qed_init_values_zipped-8.37.7.0.bin > >>>> > >>>> 12:48:27.275 §qed_init_values-8.20.0.0.bin > >>>> qed_init_values_zipped-8.10.10.0.bin > >>>> qed_init_values_zipped-8.33.1.0.bin > >>>> qed_init_values_zipped-8.4.2.0.bin > >>>> > >>>> > >>>> Best Regards > >>>> > >>>> Puneet > >>>> > >>> ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dpdk-users] [EXT] Re: [dpdk-dev] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000 2021-05-26 9:57 ` [dpdk-users] [dpdk-dev] " Varghese, Vipin @ 2021-06-01 13:00 ` Igor Russkikh 0 siblings, 0 replies; 7+ messages in thread From: Igor Russkikh @ 2021-06-01 13:00 UTC (permalink / raw) To: Varghese, Vipin, Truring Team, Nishant Verma Cc: dev, USERS, Devendra Singh Rawat, Rasesh Mody Adding my team members for that. Strangely, even if by any reason we would get OOM condition - driver should reject load gracefully. Is there any possibility FW image could be corrupted/of bad size? Regards, Igor On 5/26/2021 11:57 AM, Varghese, Vipin wrote: > External Email > > ---------------------------------------------------------------------- > Based on the logs shared from `Turing Team`, the observation is as follows > > 1. 1GB huge pages are used in the application > > ```logs > 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB > 12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB > ``` > > 2. Issue comes right at `device porbe to initialize` > > ```logs > 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device: > 0000:65:00.0 (socket 0) > 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the MCP > scratch-pad is not configured > 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized > 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not initialized! > 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not > initialized > 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW > information > 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed > 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-> 0)]qede probe > failed rc -3 > ``` > > Hence in my opinion this is related to NIC in use and how it is getting > initialized. So please try to debug driver > >> -----Original Message----- >> From: dev <dev-bounces@dpdk.org> On Behalf Of Truring Team >> Sent: Wednesday, May 26, 2021 10:12 AM >> To: Nishant Verma <vnish11@gmail.com> >> Cc: dev@dpdk.org; USERS <users@dpdk.org> >> Subject: Re: [dpdk-dev] [dpdk-users] DPDK issue with Marvell NIC QLogic >> Corp. FastLinQ QL41000 >> >> Yes , I have configured it via grub. >> >> Grub: >> "default_hugepagesz=1G hugepagesz=1G hugepages=2" >> grub2-mkconfig -o /boot/grub2/grub.cfg >> >> Manual: >> mkdir /dev/hugepages1G >> mount -t hugetlbfs -o pagesize=1G none /dev/hugepages1G echo 2 > >> /sys/devices/system/node/node1/hugepages/hugepages- >> 1048576kB/nr_hugepages >> >> Regards >> Puneet >> >> On Wed, 26 May 2021 at 10:05, Nishant Verma <vnish11@gmail.com> wrote: >> >>> meminfo states: Hugepagesize: 1048576 kB >>> But in your initial mail you state Hugepage size is 1G. >>> >>> have you configured HugePage via grub.... ? >>> >>> >>> Thanks. >>> >>> Regards, >>> NV >>> >>> On Wed, May 26, 2021 at 12:21 AM Truring Team <truring12@gmail.com> >> wrote: >>> >>>> Hi Nishant, >>>> >>>> cat /proc/meminfo >>>> 11:59:29.200 §MemTotal: 23101672 kB >>>> 11:59:29.200 §MemFree: 15254764 kB >>>> 11:59:29.200 §MemAvailable: 19243184 kB >>>> 11:59:29.200 §Buffers: 6792 kB >>>> 11:59:29.201 §Cached: 4084844 kB >>>> 11:59:29.201 §SwapCached: 0 kB >>>> 11:59:29.201 §Active: 3609016 kB >>>> 11:59:29.201 §Inactive: 1175160 kB >>>> 11:59:29.201 §Active(anon): 695644 kB >>>> 11:59:29.202 §Inactive(anon): 19716 kB >>>> 11:59:29.202 §Active(file): 2913372 kB >>>> 11:59:29.202 §Inactive(file): 1155444 kB >>>> 11:59:29.202 §Unevictable: 0 kB >>>> 11:59:29.202 §Mlocked: 0 kB >>>> 11:59:29.203 §SwapTotal: 11665404 kB >>>> 11:59:29.204 §SwapFree: 11665404 kB >>>> 11:59:29.204 §Dirty: 32 kB >>>> 11:59:29.204 §Writeback: 0 kB >>>> 11:59:29.204 §AnonPages: 694764 kB >>>> 11:59:29.205 §Mapped: 140220 kB >>>> 11:59:29.205 §Shmem: 22800 kB >>>> 11:59:29.205 §Slab: 445016 kB >>>> 11:59:29.205 §SReclaimable: 289968 kB >>>> 11:59:29.205 §SUnreclaim: 155048 kB >>>> 11:59:29.206 §KernelStack: 16624 kB >>>> 11:59:29.206 §PageTables: 35892 kB >>>> 11:59:29.206 §NFS_Unstable: 0 kB >>>> 11:59:29.206 §Bounce: 0 kB >>>> 11:59:29.206 §WritebackTmp: 0 kB >>>> 11:59:29.207 §CommitLimit: 22167664 kB >>>> 11:59:29.207 §Committed_AS: 4342668 kB >>>> 11:59:29.207 §VmallocTotal: 34359738367 kB >>>> 11:59:29.207 §VmallocUsed: 463188 kB >>>> 11:59:29.207 §VmallocChunk: 34358835196 kB >>>> 11:59:29.208 §HardwareCorrupted: 0 kB >>>> 11:59:29.208 §AnonHugePages: 329728 kB >>>> 11:59:29.208 §CmaTotal: 0 kB >>>> 11:59:29.209 §CmaFree: 0 kB >>>> 11:59:29.209 §HugePages_Total: 1024 >>>> 11:59:29.209 §HugePages_Free: 1019 >>>> 11:59:29.209 §HugePages_Rsvd: 0 >>>> 11:59:29.209 §HugePages_Surp: 0 >>>> 11:59:29.209 §Hugepagesize: 2048 kB >>>> 11:59:29.209 §DirectMap4k: 381760 kB >>>> 11:59:29.209 §DirectMap2M: 13973504 kB >>>> 11:59:29.215 §DirectMap1G: 11534336 kB >>>> >>>> Regards >>>> >>>> >>>> On Wed, 26 May 2021 at 09:43, Nishant Verma <vnish11@gmail.com> >> wrote: >>>> >>>>> Can you paste output of /proc/meminfo ? >>>>> >>>>> >>>>> >>>>> Regards, >>>>> NV >>>>> >>>>> On Tue, May 25, 2021 at 9:52 PM Truring Team <truring12@gmail.com> >>>>> wrote: >>>>> >>>>>> Hi Team, >>>>>> >>>>>> I am trying to run the dpdk test-pmd application (DPDK 20.11 and >>>>>> DPDK >>>>>> 21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE >>>>>> Controller but facing following issues: >>>>>> >>>>>> If someone can look into the following logs and help me figure out >>>>>> the issue? >>>>>> >>>>>> >>>>>> >>>>>> 1. DPDK 20.11 ( Using 1 GB hugepages) >>>>>> >>>>>> gdb ./dpdk-testpmd >>>>>> >>>>>> 12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7 >>>>>> >>>>>> 12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc. >>>>>> >>>>>> 12:45:59.348 §License GPLv3+: GNU GPL version 3 or later >>>>>> https://urldefense.proofpoint.com/v2/url?u=http-3A__gnu.org_licenses_gpl.html&d=DwIGaQ&c=nKjWec2b6R0mOyPaz7xtfQ&r=3kUjVPjrPMvlbd3rzgP63W0eewvCq4D-kzQRqaXHOqU&m=XPT-odmQXtSC6Yu2ao1h1I9z-Lzp3iTY8Er77XRkORc&s=_ge-P-H6ALF17WiCqG3NOsjp15Nbk8ptb-RpqVIpLrE&e= >>>>>> >>>>>> 12:45:59.349 §This is free software: you are free to change and >>>>>> redistribute it. >>>>>> >>>>>> 12:45:59.349 §There is NO WARRANTY, to the extent permitted by law. >>>>>> Type >>>>>> "show copying" >>>>>> >>>>>> 12:45:59.349 §and "show warranty" for details. >>>>>> >>>>>> 12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu". >>>>>> >>>>>> 12:45:59.351 §For bug reporting instructions, please see: >>>>>> >>>>>> 12:45:59.351 >>>>>> §https://urldefense.proofpoint.com/v2/url?u=http-3A__www.gnu.org_software_gdb_bugs_&d=DwIGaQ&c=nKjWec2b6R0mOyPaz7xtfQ&r=3kUjVPjrPMvlbd3rzgP63W0eewvCq4D-kzQRqaXHOqU&m=XPT-odmQXtSC6Yu2ao1h1I9z-Lzp3iTY8Er77XRkORc&s=eGKKc0q8qdyW4CSbWUdq2X6ShOHrSYguXKRC6qpG-RQ&e= >>>>>> ... >>>>>> >>>>>> 12:45:59.415 §Reading symbols from >>>>>> /home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no >> debugging >>>>>> symbols found)...done. >>>>>> >>>>>> 12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i >>>>>> >>>>>> 12:46:11.493 §Starting program: >>>>>> /home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 -- >>>>>> -i >>>>>> >>>>>> 12:46:11.717 §[Thread debugging using libthread_db enabled] >>>>>> >>>>>> 12:46:11.719 §Using host libthread_db library >>>>>> "/lib64/libthread_db.so.1". >>>>>> >>>>>> 12:46:11.768 §EAL: Detected 6 lcore(s) >>>>>> >>>>>> 12:46:11.769 §EAL: Detected 1 NUMA nodes >>>>>> >>>>>> 12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)] >>>>>> >>>>>> 12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket >>>>>> >>>>>> 12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)] >>>>>> >>>>>> 12:46:11.792 §EAL: Selected IOVA mode 'PA' >>>>>> >>>>>> 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB >>>>>> >>>>>> 12:46:11.792 §EAL: No available hugepages reported in >>>>>> hugepages-2048kB >>>>>> >>>>>> 12:46:11.854 §EAL: Probing VFIO support... >>>>>> >>>>>> 12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)] >>>>>> >>>>>> 12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)] >>>>>> >>>>>> 12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)] >>>>>> >>>>>> 12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)] >>>>>> >>>>>> 12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)] >>>>>> >>>>>> 12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device: >>>>>> 0000:65:00.0 (socket 0) >>>>>> >>>>>> 12:46:11.915 § >>>>>> >>>>>> 12:46:11.915 §Program received signal SIGSEGV, Segmentation fault. >>>>>> >>>>>> 12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc () >>>>>> >>>>>> 12:46:11.916 §Missing separate debuginfos, use: debuginfo-install >>>>>> glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64 >>>>>> libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64 >>>>>> zlib-1.2.7-19.el7_9.x86_64 >>>>>> >>>>>> 12:46:14.542 §(gdb) bt >>>>>> >>>>>> 12:46:14.548 §#0 0x0000000000ec5b20 in >> ecore_fw_overlay_mem_alloc >>>>>> () >>>>>> >>>>>> 12:46:14.548 §#1 0x0000000000eb811e in ecore_hw_init () >>>>>> >>>>>> 12:46:14.549 §#2 0x0000000000ef7397 in qed_slowpath_start () >>>>>> >>>>>> 12:46:14.549 §#3 0x0000000000ef0483 in qede_common_dev_init () >>>>>> >>>>>> 12:46:14.549 §#4 0x0000000000ef1113 in qede_eth_dev_pci_probe () >>>>>> >>>>>> 12:46:14.549 §#5 0x0000000000a4450b in pci_probe () >>>>>> >>>>>> 12:46:14.550 §#6 0x00000000009dbc6c in rte_bus_probe () >>>>>> >>>>>> 12:46:14.550 §#7 0x00000000009fa91c in rte_eal_init () >>>>>> >>>>>> 12:46:14.617 §#8 0x0000000000425db1 in main () >>>>>> >>>>>> 12:46:17.052 §(gdb) quit >>>>>> >>>>>> 12:46:17.056 §A debugging session is active. >>>>>> >>>>>> 12:46:17.056 § >>>>>> >>>>>> 12:46:17.057 § Inferior 1 [process 23180] will be killed. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> 2. *DPDK 21.05:* >>>>>> >>>>>> ./dpdk-testpmd -l 0-5 -n4 -- -i >>>>>> >>>>>> 12:46:46.257 §EAL: Detected 6 lcore(s) >>>>>> >>>>>> 12:46:46.257 §EAL: Detected 1 NUMA nodes >>>>>> >>>>>> 12:46:46.258 §EAL: Detected static linkage of DPDK >>>>>> >>>>>> 12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket >>>>>> >>>>>> 12:46:46.285 §EAL: Selected IOVA mode 'PA' >>>>>> >>>>>> 12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0 >>>>>> >>>>>> 12:46:46.288 §EAL: No available 2048 kB hugepages reported >>>>>> >>>>>> 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device: >>>>>> 0000:65:00.0 (socket 0) >>>>>> >>>>>> 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of >>>>>> the MCP scratch-pad is not configured >>>>>> >>>>>> 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not >>>>>> initialized >>>>>> >>>>>> 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not >>>>>> initialized! >>>>>> >>>>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared >> memory not >>>>>> initialized >>>>>> >>>>>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get >>>>>> HW information >>>>>> >>>>>> 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed >>>>>> >>>>>> 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port- >> 0)]qede >>>>>> probe failed rc -3 >>>>>> >>>>>> 12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used >>>>>> >>>>>> 12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not >>>>>> created >>>>>> >>>>>> 12:46:46.423 §testpmd: No probed ethernet devices >>>>>> >>>>>> 12:46:46.461 §Interactive-mode selected >>>>>> >>>>>> 12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>: >>>>>> n=187456, size=2176, socket=0 >>>>>> >>>>>> 12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc >>>>>> >>>>>> 12:46:46.540 §Done >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> System Information: >>>>>> >>>>>> *ethtool -i p2p1* >>>>>> driver: qede >>>>>> version: 8.33.0.20 >>>>>> *firmware-version: mfw 8.24.44.0 storm 8.33.11.0* >>>>>> expansion-rom-version: >>>>>> bus-info: 0000:65:00.0 >>>>>> supports-statistics: yes >>>>>> supports-test: yes >>>>>> supports-eeprom-access: no >>>>>> supports-register-dump: yes >>>>>> supports-priv-flags: yes >>>>>> >>>>>> >>>>>> >>>>>> *ethtool -i p2p2 *driver: qede >>>>>> version: 8.33.0.20 >>>>>> firmware-version: mfw 8.24.44.0 storm 8.33.11.0 >>>>>> expansion-rom-version: >>>>>> bus-info: 0000:65:00.1 >>>>>> supports-statistics: yes >>>>>> supports-test: yes >>>>>> supports-eeprom-access: no >>>>>> supports-register-dump: yes >>>>>> supports-priv-flags: yes >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> *lspci -nn | grep Ether* >>>>>> >>>>>> 12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and >>>>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] >>>>>> >>>>>> 12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and >>>>>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f] >>>>>> >>>>>> 12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp. >>>>>> FastLinQ >>>>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02) >>>>>> >>>>>> 12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp. >>>>>> FastLinQ >>>>>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02) >>>>>> >>>>>> >>>>>> >>>>>> cd /lib/firmware/qed/ >>>>>> >>>>>> ls >>>>>> >>>>>> 12:48:27.269 §qed_init_values-8.10.9.0.bin >>>>>> qed_init_values-8.30.12.0.bin qed_init_values_zipped-8.10.5.0.bin >>>>>> qed_init_values_zipped-8.33.11.0.bin >>>>>> qed_init_values_zipped-8.7.3.0.bin >>>>>> >>>>>> 12:48:27.272 §qed_init_values-8.14.6.0.bin >>>>>> qed_init_values-8.33.12.0.bin qed_init_values_zipped-8.15.3.0.bin >>>>>> qed_init_values_zipped-8.37.2.0.bin >>>>>> >>>>>> 12:48:27.273 §qed_init_values-8.18.9.0.bin >>>>>> qed_init_values-8.40.33.0.bin qed_init_values_zipped-8.20.0.0.bin >>>>>> qed_init_values_zipped-8.37.7.0.bin >>>>>> >>>>>> 12:48:27.275 §qed_init_values-8.20.0.0.bin >>>>>> qed_init_values_zipped-8.10.10.0.bin >>>>>> qed_init_values_zipped-8.33.1.0.bin >>>>>> qed_init_values_zipped-8.4.2.0.bin >>>>>> >>>>>> >>>>>> Best Regards >>>>>> >>>>>> Puneet >>>>>> >>>>> ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-06-01 13:01 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-05-26 1:51 [dpdk-users] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000 Truring Team 2021-05-26 4:13 ` Nishant Verma 2021-05-26 4:20 ` Truring Team 2021-05-26 4:35 ` Nishant Verma 2021-05-26 4:41 ` Truring Team 2021-05-26 9:57 ` [dpdk-users] [dpdk-dev] " Varghese, Vipin 2021-06-01 13:00 ` [dpdk-users] [EXT] " Igor Russkikh
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).