Hi all.
Newbie question here.

I have been playing with dpdk 21.11 for a week or two and run into something that has me scratching my head a bit.

I'm looking at packet_reorder example.  I'm running this sample with 3 cores: 1 RX, 1 Worker, and 1 TX.

dpdk-packet_ordering  -l 0-3  --  -p 3 --disable-reorder

In this example:
RX thread reads the packets from receive queue and puts them in a rx_to_workers ring
Worker thread reads from the rx_to_workers ring, changes the port number and queues to workers_to_tx ring
Tx thread reads from workers_to_tx ring and calls rte_eth_tx_buffer


What I like to do is access the packet content in the worker thread and print out a few bytes from it.

What I'm finding is that mbuf_addr value, for the same mbuf, read from RX thread is different than if read in the Worker or TX thread.

For example, when printing out the address of mbuf, and mbuf_addr values, in the three threads, I get:

rx_thread
mbuf      = 100e30000
mbuf_addr = 100e30080

worker_thread
mbuf      = 100e30000
mbuf_addr = 100000000

tx_thread
mbuf      = 100e30000
mbuf_addr = 100000000


So although mbuf is the same, the mbuf_addr is different.   The packet content is obviously (?) different if read in RX, vs if read in Worker or TX thread.

Is this what is supposed to happen?

Basically: how do I get access to the actual ethernet packet, for reading or modifying, on different lcores; in this case the worker thread.