From: Murali Krishna <murali.krishna@broadcom.com>
To: users@dpdk.org
Subject: [dpdk-users] unable to run l2fwd application due to 'Cause: No Ethernet ports - bye' error
Date: Fri, 18 Mar 2016 20:41:02 +0530 [thread overview]
Message-ID: <d9ece0ad758d4fc563bd44849242f0d1@mail.gmail.com> (raw)
Hi All,
I am unable to run l2fwd app on linux, due to ‘Cause: No Ethernet ports -
bye' error
I am using *DPDK 2.0.0* with *Emulex OCe14102* adapter
[root@Rhel67GA-Valencia DPDK2]# lspci | grep Emulex
01:00.0 Ethernet controller: Emulex Corporation OneConnect NIC (Skyhawk)
(rev 10)
01:00.1 Ethernet controller: Emulex Corporation OneConnect NIC (Skyhawk)
(rev 10)
The Emulex oce driver is listed in the list of supported drivers(
http://dpdk.org/doc/nics )
Below is the detailed information:
[root@Rhel67GA-Valencia DPDK2]# ./l2fwd -c f -n 4 -- -q 8 -p ffff
EAL: Detected lcore 0 as core 0 on socket 0
EAL: Detected lcore 1 as core 0 on socket 1
EAL: Detected lcore 2 as core 1 on socket 0
EAL: Detected lcore 3 as core 1 on socket 1
EAL: Detected lcore 4 as core 2 on socket 0
EAL: Detected lcore 5 as core 2 on socket 1
EAL: Detected lcore 6 as core 3 on socket 0
EAL: Detected lcore 7 as core 3 on socket 1
EAL: Detected lcore 8 as core 4 on socket 0
EAL: Detected lcore 9 as core 4 on socket 1
EAL: Detected lcore 10 as core 5 on socket 0
EAL: Detected lcore 11 as core 5 on socket 1
EAL: Detected lcore 12 as core 6 on socket 0
EAL: Detected lcore 13 as core 6 on socket 1
EAL: Detected lcore 14 as core 7 on socket 0
EAL: Detected lcore 15 as core 7 on socket 1
EAL: Detected lcore 16 as core 0 on socket 0
EAL: Detected lcore 17 as core 0 on socket 1
EAL: Detected lcore 18 as core 1 on socket 0
EAL: Detected lcore 19 as core 1 on socket 1
EAL: Detected lcore 20 as core 2 on socket 0
EAL: Detected lcore 21 as core 2 on socket 1
EAL: Detected lcore 22 as core 3 on socket 0
EAL: Detected lcore 23 as core 3 on socket 1
EAL: Detected lcore 24 as core 4 on socket 0
EAL: Detected lcore 25 as core 4 on socket 1
EAL: Detected lcore 26 as core 5 on socket 0
EAL: Detected lcore 27 as core 5 on socket 1
EAL: Detected lcore 28 as core 6 on socket 0
EAL: Detected lcore 29 as core 6 on socket 1
EAL: Detected lcore 30 as core 7 on socket 0
EAL: Detected lcore 31 as core 7 on socket 1
EAL: Support maximum 128 logical core(s) by configuration.
EAL: Detected 32 lcore(s)
EAL: Setting up memory...
EAL: Ask a virtual area of 0x40000000 bytes
EAL: Virtual area found at 0x7ff3cb600000 (size = 0x40000000)
EAL: Ask a virtual area of 0x40000000 bytes
EAL: Virtual area found at 0x7ff38b400000 (size = 0x40000000)
EAL: Requesting 512 pages of size 2MB from socket 0
EAL: Requesting 512 pages of size 2MB from socket 1
EAL: TSC frequency is ~2399998 KHz
EAL: Master lcore 0 is ready (tid=bb39880;cpuset=[0])
PMD: ENICPMD trace: rte_enic_pmd_init
EAL: lcore 1 is ready (tid=8a5f0700;cpuset=[1])
EAL: lcore 2 is ready (tid=89bef700;cpuset=[2])
EAL: lcore 3 is ready (tid=891ee700;cpuset=[3])
EAL: Error - exiting with code: 1
Cause: No Ethernet ports – bye
Please let me know how to proceed on this.
Thanks,
Murali
next reply other threads:[~2016-03-18 15:11 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-18 15:11 Murali Krishna [this message]
2016-03-18 15:21 ` Vladimir Medvedkin
2016-03-18 15:26 ` Murali Krishna
2016-03-18 15:46 ` Murali Krishna
2016-03-18 17:18 ` Vladimir Medvedkin
2016-03-18 18:08 ` Murali Krishna
2016-03-19 1:04 Krishna Mohan
2016-03-21 7:24 ` Murali Krishna
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d9ece0ad758d4fc563bd44849242f0d1@mail.gmail.com \
--to=murali.krishna@broadcom.com \
--cc=users@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).