From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from dpdk.org (dpdk.org [92.243.14.124]) by inbox.dpdk.org (Postfix) with ESMTP id 1F229A2E1B for ; Tue, 3 Sep 2019 22:16:13 +0200 (CEST) Received: from [92.243.14.124] (localhost [127.0.0.1]) by dpdk.org (Postfix) with ESMTP id 072FF1EBD3; Tue, 3 Sep 2019 22:16:13 +0200 (CEST) Received: from out2-smtp.messagingengine.com (out2-smtp.messagingengine.com [66.111.4.26]) by dpdk.org (Postfix) with ESMTP id F269D1EBD3 for ; Tue, 3 Sep 2019 22:16:11 +0200 (CEST) Received: from compute1.internal (compute1.nyi.internal [10.202.2.41]) by mailout.nyi.internal (Postfix) with ESMTP id 3B941222E7; Tue, 3 Sep 2019 16:16:11 -0400 (EDT) Received: from mailfrontend1 ([10.202.2.162]) by compute1.internal (MEProxy); Tue, 03 Sep 2019 16:16:11 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=monjalon.net; h= from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding:content-type; s=mesmtp; bh=QG86z+n/2VbjHoAwXHRUN42TIFgmpJFe4XoUNgURL6w=; b=dex3l7QD5+kU vXOfpYNiYRnl3n0TfMl0o8dWc6piV0fS2/qhRa0WFEruqpmVfW7t5hiaWKJmwoVH WuEDsZDAY/TzBIo8srYIVAfYCNXltwEd88d0LM1GeacHkuRZOOs4CRs9NaD8bHbI JxjFK5/dTl062Qx7nFKHQcylwCrAqkM= DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d= messagingengine.com; h=cc:content-transfer-encoding:content-type :date:from:in-reply-to:message-id:mime-version:references :subject:to:x-me-proxy:x-me-proxy:x-me-sender:x-me-sender :x-sasl-enc; s=fm3; bh=QG86z+n/2VbjHoAwXHRUN42TIFgmpJFe4XoUNgURL 6w=; b=BsLi7u4rmlIeO/XXK7T7cKZXTT33rh0ALb6p9XwlGmSOKZHthC8nYlpDV Ib2AwQ8cCc4yO6b4a9LJBkmL0RqR5yIuolGikuvOo3DQHfOs7LM8MABudh7pVYqs mbnbYlEeL3Oa+NxmTzfeLnAmT+HMhg9V83b4mzGpl0whZB9GkMw8o0vHuq2sZH25 Qa0+u9s92KHtUatEpHlE37aj1iMr7J8wi9sP9dsSXNTMD5TlSxgq5UZ2ylADSN4K iUS4SljZwqal233dnyJRE0uolPKbRnjfLjpMY+RLHtJ2LcwllYZLD/28u++i/Vfd Yg+ATLxYuA8MjDahZyO6FBg7TH8/g== X-ME-Sender: X-ME-Proxy-Cause: gggruggvucftvghtrhhoucdtuddrgeduvddrudejfedguddukecutefuodetggdotefrod ftvfcurfhrohhfihhlvgemucfhrghsthforghilhdpqfgfvfdpuffrtefokffrpgfnqfgh necuuegrihhlohhuthemuceftddtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmd enucfjughrpefhvffufffkjghfggfgtgesthfuredttddtvdenucfhrhhomhepvfhhohhm rghsucfoohhnjhgrlhhonhcuoehthhhomhgrshesmhhonhhjrghlohhnrdhnvghtqeenuc ffohhmrghinhepfihinhhstghprdhnvghtpdguphgukhdrohhrghdpmhhosggrthgvkhdr nhgvthenucfkphepjeejrddufeegrddvtdefrddukeegnecurfgrrhgrmhepmhgrihhlfh hrohhmpehthhhomhgrshesmhhonhhjrghlohhnrdhnvghtnecuvehluhhsthgvrhfuihii vgeptd X-ME-Proxy: Received: from xps.localnet (184.203.134.77.rev.sfr.net [77.134.203.184]) by mail.messagingengine.com (Postfix) with ESMTPA id 2E22080061; Tue, 3 Sep 2019 16:16:10 -0400 (EDT) From: Thomas Monjalon To: "Mcloughlin, Aideen" Cc: web@dpdk.org Date: Tue, 03 Sep 2019 22:16:07 +0200 Message-ID: <1813118.SnySuNK0Op@xps> In-Reply-To: <04A40BE47A76AC49A9B2BC6F269E4F1C42D11733@irsmsx105.ger.corp.intel.com> References: <20190719134250.19920-1-aideen.mcloughlin@intel.com> <04A40BE47A76AC49A9B2BC6F269E4F1C42D11733@irsmsx105.ger.corp.intel.com> MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" Subject: Re: [dpdk-web] [PATCH] update quick start guide X-BeenThere: web@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: DPDK website maintenance List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: web-bounces@dpdk.org Sender: "web" 28/08/2019 12:37, Mcloughlin, Aideen: > If anyone has a chance to look over this that'd be great- It's been sitting on the mailing list for a while I would like to read more comments about this writeup. Personnally I am not sure it is the right direction. It looks to be a tutorial for babies. Is it really what we want as a "quick start guide"? When I wrote the first version of this page, the intent was to provide a quick demo for skilled people who just downloaded the package and want to do a quick run. If a user is interested in more help or details, the user guides should be more appropriate. > From: Mcloughlin, Aideen > > The Quick Start Guide was unclear. This patch updates the Quick Start Guide so that it can be more helpful to new users of DPDK. This patch changes the use of physical ports to null ports as not all new users will have easily usable ports. > > These null ports simulate packets to avoid the process of setting up and running a packet generator. > > The previous version of the quick start guide was only compatible with multi socket platforms, this patch makes it compatible with single socket platforms. > > Signed-off-by: A.McLoughlin > --- > content/doc/quick-start.md | 118 ++++++++++++++++++++++--------------- > 1 file changed, 69 insertions(+), 49 deletions(-) > > diff --git a/content/doc/quick-start.md b/content/doc/quick-start.md index fdffa98..d85bcb6 100644 > --- a/content/doc/quick-start.md > +++ b/content/doc/quick-start.md > @@ -4,74 +4,94 @@ title = "Quick Start Guide" > > {{% alert theme="info" %}}
A simple forwarding test with pcap PMD which works with any NIC (with performance penalties)
{{% /alert %}} > > -Extract sources > - > +## Download DPDK {#download} > +--- > +Download a DPDK package from [this page](/download/). It is best to download the latest stable version. > +If you want to have DPDK on a remote server or board, you must transfer > +the downloaded file to the board/server. You can do this with programs > +such as [WinSCP](https://winscp.net/eng/index.php) or > +[MobaXterm](https://mobaxterm.mobatek.net/download.html) > + > +## Extract source files from downloaded file {#extract} > +--- > +Ensure the downloaded file is in the directory in which you want DPDK, and that you are in that same directory. > +To extract the DPDK files from the downloaded file into a new > +directory, run the command below (if you downloaded dpdk-19.05.tar.xz , > +the commands should reflect that eg. tar xf dpdk-19.05.tar.xz) > ``` > tar xf dpdk.tar.gz > +``` > +Enter the newly created directory with the cd command as below ``` > cd dpdk > ``` > - > -Enable pcap (libpcap headers are required). > - > +## Build DPDK {#build} > +--- > +To make any necessary config changes to the environment before DPDK is > +built, run the command below > ``` > - make config T=x86_64-native-linuxapp-gcc > - sed -ri 's,(PMD_PCAP=).*,\1y,' build/.config > + make defconfig > ``` > - > -Build libraries and test application (Linux headers may be needed with default config). > - > +The command below builds a usable version of DPDK from the DPDK folder. You must be within the new DPDK folder for this command to run. > +It may take a while for the command to fully run as there are a lot of elements to build in DPDK. > ``` > - make > + make -j > ``` > +'make' is the standard command to build an application, and '-j' tells > +the make command to use all the cores when building, which should speed > +up the building process > > -Reserve huge pages memory. > - > +## Reserve memory for Hugepages {#hugepages} > +--- > +Hugepages increase application performance as the performance cost of swapping between pages is much less than if only small pages were used. > +First make subdirectory huge in directory mnt > ``` > mkdir -p /mnt/huge > +``` > +Then make the filesystem 'hugelbfs nodev' accessible to directory structure /mnt/huge for the proper storage of the hugepages which will be created. > +``` > mount -t hugetlbfs nodev /mnt/huge > - echo 64 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages > ``` > - > -Run poll-mode driver test (with a cable between ports). > - > +Then allocate 1024 hugepages with the command below ``` > + sysctl -w vm.nr_hugepages=1024 > ``` > - build/app/testpmd -c7 -n3 --vdev=net_pcap0,iface=eth0 --vdev=net_pcap1,iface=eth1 -- > - -i --nb-cores=2 --nb-ports=2 --total-num-mbufs=2048 > - > - testpmd> show port stats all > - > - ######################## NIC statistics for port 0 ######################## > - RX-packets: 0 RX-errors: 0 RX-bytes: 0 > - TX-packets: 0 TX-errors: 0 TX-bytes: 0 > - ############################################################################ > - > - ######################## NIC statistics for port 1 ######################## > - RX-packets: 0 RX-errors: 0 RX-bytes: 0 > - TX-packets: 0 TX-errors: 0 TX-bytes: 0 > - ############################################################################ > > - testpmd> start tx_first > +## Run poll-mode packet forwarding test {#run} > +--- > +Run the command below to start a packet sending and receiving program > +``` > + build/app/testpmd --vdev=net_null0 --vdev=net_null1 -- -i ``` > > +You may have a lot of errors like the one shown below. This is because > +we do not give specific device addresses to use, and so the system > +checks every available device to use before running. In this case, you > +can ignore those error messages ``` > + EAL: PCI device 0000:83:00.1 on NUMA socket -1 > + EAL: Invalid NUMA socket, default to 0 > + EAL: probe driver: 8086:10fb net_ixgbe > +``` > +Within the program, type 'start' to start transmission of packets. That will print out information on how the packets are being transmitted, and will keep transmitting until you stop transmission. > +``` > + testpmd> start > +``` > +Type 'stop' to both stop transmission and display stats on the > +transmission, as shown below ``` > testpmd> stop > - > + Telling cores to stop... > + Waiting for lcores to finish... > ---------------------- Forward statistics for port 0 ---------------------- > - RX-packets: 2377688 RX-dropped: 0 RX-total: 2377688 > - TX-packets: 2007009 TX-dropped: 0 TX-total: 2007009 > - ---------------------------------------------------------------------------- > - > + RX-packets: 105326272 RX-dropped: 0 RX-total: 105326272 > + TX-packets: 105326272 TX-dropped: 0 TX-total: 105326272 > + > + ---------------------------------------------------------------------- > + ------ > ---------------------- Forward statistics for port 1 ---------------------- > - RX-packets: 2006977 RX-dropped: 0 RX-total: 2006977 > - TX-packets: 2377720 TX-dropped: 0 TX-total: 2377720 > - ---------------------------------------------------------------------------- > - > - +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++ > - RX-packets: 4384665 RX-dropped: 0 RX-total: 4384665 > - TX-packets: 4384729 TX-dropped: 0 TX-total: 4384729 > - ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > + RX-packets: 105326272 RX-dropped: 0 RX-total: 105326272 > + TX-packets: 105326272 TX-dropped: 0 TX-total: 105326272 > + > + ---------------------------------------------------------------------- > + ------ +++++++++++++++ Accumulated forward statistics for all > + ports+++++++++ > + RX-packets: 210652544 RX-dropped: 0 RX-total: 210652544 > + TX-packets: 210652544 TX-dropped: 0 TX-total: 210652544 > + +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > + Done. > ``` > +To exit the program, type 'quit' > > -Some sample applications can be tested after building them. > +You have now run testpmd, a DPDK packet forwarding application. To continue learning about how to use DPDK, go to the [DPDK guide website](https://doc.dpdk.org/guides/index.html). > + > +Testpmd is a forwarding application and not a packet generator. We can see packets being sent and received in this example as the null devices (net_null0, net_null1) simulate packets. > + > +The next step in understanding and setting up DPDK is binding ports. > +This will allow you to send actual packets, instead of simulated packets For an explanation on how to bind ports to DPDK follow [these instructions](https://doc.dpdk.org/guides/linux_gsg/linux_drivers.html) from the DPDK guide website. > > -``` > - make -C examples RTE_SDK=$(pwd) RTE_TARGET=build O=$(pwd)/build/examples -``` > -- > 2.17.1 > >