From: Ferruh Yigit <ferruh.yigit@intel.com>
To: Yasufumi Ogawa <yasufum.o@gmail.com>,
"Mcloughlin, Aideen" <aideen.mcloughlin@intel.com>,
"web@dpdk.org" <web@dpdk.org>
Subject: Re: [dpdk-web] [PATCH] update quick start guide
Date: Fri, 30 Aug 2019 09:05:25 +0100 [thread overview]
Message-ID: <3e700e3a-9d3b-501f-d520-4a58b0901a4b@intel.com> (raw)
In-Reply-To: <5dca1ce7-9ef1-5e15-0139-0721071014f6@gmail.com>
On 8/30/2019 6:07 AM, Yasufumi Ogawa wrote:
> Hi Aideen,
>
>> If anyone has a chance to look over this that'd be great- It's been sitting on the mailing list for a while
>>
>> -----Original Message-----
>> From: Mcloughlin, Aideen
>> Sent: Friday, July 19, 2019 2:43 PM
>> To: web@dpdk.org
>> Cc: Mcloughlin, Aideen <aideen.mcloughlin@intel.com>
>> Subject: [PATCH] update quick start guide
>>
>> The Quick Start Guide was unclear. This patch updates the Quick Start Guide so that it can be more helpful to new users of DPDK. This patch changes the use of physical ports to null ports as not all new users will have easily usable ports.
>>
>> These null ports simulate packets to avoid the process of setting up and running a packet generator.
>>
>> The previous version of the quick start guide was only compatible with multi socket platforms, this patch makes it compatible with single socket platforms.
>>
>> Signed-off-by: A.McLoughlin <aideen.mcloughlin@intel.com>
>> ---
>> content/doc/quick-start.md | 118 ++++++++++++++++++++++---------------
>> 1 file changed, 69 insertions(+), 49 deletions(-)
>>
>> diff --git a/content/doc/quick-start.md b/content/doc/quick-start.md index fdffa98..d85bcb6 100644
>> --- a/content/doc/quick-start.md
>> +++ b/content/doc/quick-start.md
>> @@ -4,74 +4,94 @@ title = "Quick Start Guide"
>>
>> {{% alert theme="info" %}}<center>A simple forwarding test with pcap PMD which works with any NIC (with performance penalties)</center>{{% /alert %}}
>>
>> -Extract sources
>> -
>> +## Download DPDK {#download}
>> +---
>> +Download a DPDK package from [this page](/download/). It is best to download the latest stable version.
>> +If you want to have DPDK on a remote server or board, you must transfer
>> +the downloaded file to the board/server. You can do this with programs
>> +such as [WinSCP](https://winscp.net/eng/index.php) or
>> +[MobaXterm](https://mobaxterm.mobatek.net/download.html)
>> +
>> +## Extract source files from downloaded file {#extract}
>> +---
>> +Ensure the downloaded file is in the directory in which you want DPDK, and that you are in that same directory.
>> +To extract the DPDK files from the downloaded file into a new
>> +directory, run the command below (if you downloaded dpdk-19.05.tar.xz ,
>> +the commands should reflect that eg. tar xf dpdk-19.05.tar.xz)
>> ```
>> tar xf dpdk.tar.gz
>> +```
>> +Enter the newly created directory with the cd command as below ```
>> cd dpdk
>> ```
>> -
>> -Enable pcap (libpcap headers are required).
>> -
>> +## Build DPDK {#build}
>> +---
>> +To make any necessary config changes to the environment before DPDK is
>> +built, run the command below
>> ```
>> - make config T=x86_64-native-linuxapp-gcc
>> - sed -ri 's,(PMD_PCAP=).*,\1y,' build/.config
>> + make defconfig
>> ```
>> -
>> -Build libraries and test application (Linux headers may be needed with default config).
>> -
>> +The command below builds a usable version of DPDK from the DPDK folder. You must be within the new DPDK folder for this command to run.
>> +It may take a while for the command to fully run as there are a lot of elements to build in DPDK.
>> ```
>> - make
>> + make -j
>> ```
>> +'make' is the standard command to build an application, and '-j' tells
>> +the make command to use all the cores when building, which should speed
>> +up the building process
>>
>> -Reserve huge pages memory.
>> -
>> +## Reserve memory for Hugepages {#hugepages}
>> +---
>> +Hugepages increase application performance as the performance cost of swapping between pages is much less than if only small pages were used.
>> +First make subdirectory huge in directory mnt
>> ```
>> mkdir -p /mnt/huge
>> +```
>> +Then make the filesystem 'hugelbfs nodev' accessible to directory structure /mnt/huge for the proper storage of the hugepages which will be created.
> Here is a misc typo. 'hugetlbfs nodev' correctly.
>
>> +```
>> mount -t hugetlbfs nodev /mnt/huge
>> - echo 64 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
>> ```
>> -
>> -Run poll-mode driver test (with a cable between ports).
>> -
>> +Then allocate 1024 hugepages with the command below ```
>> + sysctl -w vm.nr_hugepages=1024
>> ```
>> - build/app/testpmd -c7 -n3 --vdev=net_pcap0,iface=eth0 --vdev=net_pcap1,iface=eth1 --
>> - -i --nb-cores=2 --nb-ports=2 --total-num-mbufs=2048
>> -
>> - testpmd> show port stats all
>> -
>> - ######################## NIC statistics for port 0 ########################
>> - RX-packets: 0 RX-errors: 0 RX-bytes: 0
>> - TX-packets: 0 TX-errors: 0 TX-bytes: 0
>> - ############################################################################
>> -
>> - ######################## NIC statistics for port 1 ########################
>> - RX-packets: 0 RX-errors: 0 RX-bytes: 0
>> - TX-packets: 0 TX-errors: 0 TX-bytes: 0
>> - ############################################################################
>>
>> - testpmd> start tx_first
>> +## Run poll-mode packet forwarding test {#run}
>> +---
>> +Run the command below to start a packet sending and receiving program
>> +```
>> + build/app/testpmd --vdev=net_null0 --vdev=net_null1 -- -i ```
> I am not sure it is good for using nullpmd as an example here because
> there is no description for this pmd in the recent documents. I think
> using tap pmd described in [1] is also simple and more reasonable than
> null pmd. What do you think?
>
> build/app/testpmd --vdev=net_tap0 --vdev=net_tap1 -- -i
>
> sudo ip link set dtap0 up; sudo ip addr add 192.168.0.250/24 dev dtap0
> sudo ip link set dtap1 up; sudo ip addr add 192.168.1.250/24 dev dtap1
> sudo socat interface:dtap0 interface:dtap1
>
> [1] http://doc.dpdk.org/guides/nics/tap.html#example
null PMD is easy to use, it doesn't have any hw and platform dependency or any
configuration requirement, it looks like good fit for Quick Start Guide.
But I agree on your concern that null PMD has no documentation, perhaps we
should fix this by adding some documentation for it.
>
> Thanks,
> Yasufumi
>
>>
>> +You may have a lot of errors like the one shown below. This is because
>> +we do not give specific device addresses to use, and so the system
>> +checks every available device to use before running. In this case, you
>> +can ignore those error messages ```
>> + EAL: PCI device 0000:83:00.1 on NUMA socket -1
>> + EAL: Invalid NUMA socket, default to 0
>> + EAL: probe driver: 8086:10fb net_ixgbe
>> +```
>> +Within the program, type 'start' to start transmission of packets. That will print out information on how the packets are being transmitted, and will keep transmitting until you stop transmission.
>> +```
>> + testpmd> start
>> +```
>> +Type 'stop' to both stop transmission and display stats on the
>> +transmission, as shown below ```
>> testpmd> stop
>> -
>> + Telling cores to stop...
>> + Waiting for lcores to finish...
>> ---------------------- Forward statistics for port 0 ----------------------
>> - RX-packets: 2377688 RX-dropped: 0 RX-total: 2377688
>> - TX-packets: 2007009 TX-dropped: 0 TX-total: 2007009
>> - ----------------------------------------------------------------------------
>> -
>> + RX-packets: 105326272 RX-dropped: 0 RX-total: 105326272
>> + TX-packets: 105326272 TX-dropped: 0 TX-total: 105326272
>> +
>> + ----------------------------------------------------------------------
>> + ------
>> ---------------------- Forward statistics for port 1 ----------------------
>> - RX-packets: 2006977 RX-dropped: 0 RX-total: 2006977
>> - TX-packets: 2377720 TX-dropped: 0 TX-total: 2377720
>> - ----------------------------------------------------------------------------
>> -
>> - +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
>> - RX-packets: 4384665 RX-dropped: 0 RX-total: 4384665
>> - TX-packets: 4384729 TX-dropped: 0 TX-total: 4384729
>> - ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> + RX-packets: 105326272 RX-dropped: 0 RX-total: 105326272
>> + TX-packets: 105326272 TX-dropped: 0 TX-total: 105326272
>> +
>> + ----------------------------------------------------------------------
>> + ------ +++++++++++++++ Accumulated forward statistics for all
>> + ports+++++++++
>> + RX-packets: 210652544 RX-dropped: 0 RX-total: 210652544
>> + TX-packets: 210652544 TX-dropped: 0 TX-total: 210652544
>> + +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> + Done.
>> ```
>> +To exit the program, type 'quit'
>>
>> -Some sample applications can be tested after building them.
>> +You have now run testpmd, a DPDK packet forwarding application. To continue learning about how to use DPDK, go to the [DPDK guide website](https://doc.dpdk.org/guides/index.html).
>> +
>> +Testpmd is a forwarding application and not a packet generator. We can see packets being sent and received in this example as the null devices (net_null0, net_null1) simulate packets.
>> +
>> +The next step in understanding and setting up DPDK is binding ports.
>> +This will allow you to send actual packets, instead of simulated packets For an explanation on how to bind ports to DPDK follow [these instructions](https://doc.dpdk.org/guides/linux_gsg/linux_drivers.html) from the DPDK guide website.
>>
>> -```
>> - make -C examples RTE_SDK=$(pwd) RTE_TARGET=build O=$(pwd)/build/examples -```
>> --
>> 2.17.1
>>
next prev parent reply other threads:[~2019-08-30 8:05 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-19 13:42 A.McLoughlin
2019-08-28 10:37 ` Mcloughlin, Aideen
2019-08-30 5:07 ` Yasufumi Ogawa
2019-08-30 8:05 ` Ferruh Yigit [this message]
2019-09-02 9:35 ` Yasufumi Ogawa
2019-09-03 20:16 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3e700e3a-9d3b-501f-d520-4a58b0901a4b@intel.com \
--to=ferruh.yigit@intel.com \
--cc=aideen.mcloughlin@intel.com \
--cc=web@dpdk.org \
--cc=yasufum.o@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).