DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Zhang, Qi Z" <qi.z.zhang@intel.com>
To: "Zhang, Qi Z" <qi.z.zhang@intel.com>,
	"Li, Xiaoyun" <xiaoyun.li@intel.com>,
	"Xing, Beilei" <beilei.xing@intel.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>,
	"Yang, Zhiyong" <zhiyong.yang@intel.com>,
	"Richardson, Bruce" <bruce.richardson@intel.com>,
	"Hunt, David" <david.hunt@intel.com>
Subject: Re: [dpdk-dev] [PATCH v4] net/i40e: add interface to choose latest	vector path
Date: Wed, 12 Sep 2018 07:50:47 +0000	[thread overview]
Message-ID: <039ED4275CED7440929022BC67E70611532843B7@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <039ED4275CED7440929022BC67E706115328439F@SHSMSX103.ccr.corp.intel.com>



> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Zhang, Qi Z
> Sent: Wednesday, September 12, 2018 3:45 PM
> To: Li, Xiaoyun <xiaoyun.li@intel.com>; Xing, Beilei <beilei.xing@intel.com>
> Cc: dev@dpdk.org; Yang, Zhiyong <zhiyong.yang@intel.com>; Richardson,
> Bruce <bruce.richardson@intel.com>; Hunt, David <david.hunt@intel.com>
> Subject: Re: [dpdk-dev] [PATCH v4] net/i40e: add interface to choose latest
> vector path
> 
> 
> 
> > -----Original Message-----
> > From: Li, Xiaoyun
> > Sent: Monday, September 10, 2018 6:18 PM
> > To: Xing, Beilei <beilei.xing@intel.com>; Zhang, Qi Z
> > <qi.z.zhang@intel.com>
> > Cc: dev@dpdk.org; Yang, Zhiyong <zhiyong.yang@intel.com>; Richardson,
> > Bruce <bruce.richardson@intel.com>; Hunt, David
> > <david.hunt@intel.com>; Li, Xiaoyun <xiaoyun.li@intel.com>
> > Subject: [PATCH v4] net/i40e: add interface to choose latest vector
> > path
> >
> > Right now, vector path is limited to only use on later platform.
> > This patch adds a devarg use-latest-vec to allow the users to use the
> > latest vector path that the platform supported. Namely, using AVX2
> > vector path on broadwell is possible.
> >
> > Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
> > ---
> > v4:
> >  * Polish the codes.
> > v3:
> >  * Polish the doc and commit log.
> > v2:
> >  * Correct the calling of the wrong function last time.
> >  * Fix seg fault bug.
> > ---
> >  doc/guides/nics/i40e.rst               |   8 ++
> >  doc/guides/rel_notes/release_18_11.rst |   4 +
> >  drivers/net/i40e/i40e_ethdev.c         |  46 ++++++++++-
> >  drivers/net/i40e/i40e_ethdev.h         |   3 +
> >  drivers/net/i40e/i40e_rxtx.c           | 103 ++++++++++++++++---------
> >  5 files changed, 128 insertions(+), 36 deletions(-)
> >
> > diff --git a/doc/guides/nics/i40e.rst b/doc/guides/nics/i40e.rst index
> > 65d87f869..643e6a062 100644
> > --- a/doc/guides/nics/i40e.rst
> > +++ b/doc/guides/nics/i40e.rst
> > @@ -163,6 +163,14 @@ Runtime Config Options
> >    Currently hot-plugging of representor ports is not supported so all
> required
> >    representors must be specified on the creation of the PF.
> >
> > +- ``Use latest vector`` (default ``disable``)
> > +
> > +  Vector path was limited to use only on later platform. But users
> > + may want the  latest vector path. For example, VPP users may want to
> > + use
> > + AVX2 vector path on HSW/BDW  because it can get better perf. So
> > + ``devargs`` parameter ``use-latest-vec`` is  introduced, for example::
> > +    -w 84:00.0,use-latest-vec=1
> > +
> >  Driver compilation and testing
> >  ------------------------------
> >
> > diff --git a/doc/guides/rel_notes/release_18_11.rst
> > b/doc/guides/rel_notes/release_18_11.rst
> > index 3ae6b3f58..34af591a2 100644
> > --- a/doc/guides/rel_notes/release_18_11.rst
> > +++ b/doc/guides/rel_notes/release_18_11.rst
> > @@ -54,6 +54,10 @@ New Features
> >       Also, make sure to start the actual text at the margin.
> >       =========================================================
> >
> > +* **Added a devarg to use the latest vector path.**
> > +  A new devarg ``use-latest-vec`` was introduced to allow users to
> > +choose
> > +  the latest vector path that the platform supported. For example,
> > +VPP users
> > +  can use AVX2 vector path on BDW/HSW to get better performance.
> >
> >  API Changes
> >  -----------
> > diff --git a/drivers/net/i40e/i40e_ethdev.c
> > b/drivers/net/i40e/i40e_ethdev.c index 85a6a867f..72377d0b6 100644
> > --- a/drivers/net/i40e/i40e_ethdev.c
> > +++ b/drivers/net/i40e/i40e_ethdev.c
> > @@ -44,6 +44,7 @@
> >  #define ETH_I40E_FLOATING_VEB_LIST_ARG	"floating_veb_list"
> >  #define ETH_I40E_SUPPORT_MULTI_DRIVER	"support-multi-driver"
> >  #define ETH_I40E_QUEUE_NUM_PER_VF_ARG	"queue-num-per-vf"
> > +#define ETH_I40E_USE_LATEST_VEC	"use-latest-vec"
> >
> >  #define I40E_CLEAR_PXE_WAIT_MS     200
> >
> > @@ -408,6 +409,7 @@ static const char *const valid_keys[] = {
> >  	ETH_I40E_FLOATING_VEB_LIST_ARG,
> >  	ETH_I40E_SUPPORT_MULTI_DRIVER,
> >  	ETH_I40E_QUEUE_NUM_PER_VF_ARG,
> > +	ETH_I40E_USE_LATEST_VEC,
> >  	NULL};
> >
> >  static const struct rte_pci_id pci_id_i40e_map[] = { @@ -1201,6
> > +1203,46 @@ i40e_aq_debug_write_global_register(struct i40e_hw *hw,
> >  	return i40e_aq_debug_write_register(hw, reg_addr, reg_val,
> > cmd_details);  }
> >
> > +static int
> > +i40e_parse_latest_vec(struct rte_eth_dev *dev) {
> > +	struct i40e_adapter *ad =
> > +		I40E_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
> > +	int kvargs_count, use_latest_vec;
> > +	struct rte_kvargs *kvlist;
> > +
> > +	ad->use_latest_vec = false;
> > +
> > +	if (!dev->device->devargs)
> > +		return 0;
> > +
> > +	kvlist = rte_kvargs_parse(dev->device->devargs->args, valid_keys);
> > +	if (!kvlist)
> > +		return -EINVAL;
> > +
> > +	kvargs_count = rte_kvargs_count(kvlist, ETH_I40E_USE_LATEST_VEC);
> > +	if (!kvargs_count) {
> > +		rte_kvargs_free(kvlist);
> > +		return 0;
> > +	}
> > +
> > +	if (kvargs_count > 1)
> > +		PMD_DRV_LOG(WARNING, "More than one argument \"%s\" and
> > only "
> > +			    "the first one is used !",
> > +			    ETH_I40E_USE_LATEST_VEC);
> > +
> > +	use_latest_vec = atoi((&kvlist->pairs[0])->value);
> > +
> > +	rte_kvargs_free(kvlist);
> > +
> > +	if (use_latest_vec != 0 && use_latest_vec != 1)
> > +		PMD_DRV_LOG(WARNING, "Value should be 0 or 1, set it as 1!");
> > +
> > +	ad->use_latest_vec = (bool)use_latest_vec;
> > +
> > +	return 0;
> > +}
> > +
> >  static int
> >  eth_i40e_dev_init(struct rte_eth_dev *dev, void *init_params
> > __rte_unused) { @@ -1263,6 +1305,7 @@ eth_i40e_dev_init(struct
> > rte_eth_dev *dev, void *init_params __rte_unused)
> >
> >  	/* Check if need to support multi-driver */
> >  	i40e_support_multi_driver(dev);
> > +	i40e_parse_latest_vec(dev);
> >
> >  	/* Make sure all is clean before doing PF reset */
> >  	i40e_clear_hw(hw);
> > @@ -12527,4 +12570,5 @@ RTE_PMD_REGISTER_PARAM_STRING(net_i40e,
> >  			      ETH_I40E_FLOATING_VEB_ARG "=1"
> >  			      ETH_I40E_FLOATING_VEB_LIST_ARG "=<string>"
> >  			      ETH_I40E_QUEUE_NUM_PER_VF_ARG "=1|2|4|8|16"
> > -			      ETH_I40E_SUPPORT_MULTI_DRIVER "=1");
> > +			      ETH_I40E_SUPPORT_MULTI_DRIVER "=1"
> > +			      ETH_I40E_USE_LATEST_VEC "=1");
> > diff --git a/drivers/net/i40e/i40e_ethdev.h
> > b/drivers/net/i40e/i40e_ethdev.h index 3fffe5a55..140c92b84 100644
> > --- a/drivers/net/i40e/i40e_ethdev.h
> > +++ b/drivers/net/i40e/i40e_ethdev.h
> > @@ -1078,6 +1078,9 @@ struct i40e_adapter {
> >  	uint64_t pctypes_tbl[I40E_FLOW_TYPE_MAX] __rte_cache_min_aligned;
> >  	uint64_t flow_types_mask;
> >  	uint64_t pctypes_mask;
> > +
> > +	/* For devargs */
> > +	bool use_latest_vec;
> >  };
> >
> >  /**
> > diff --git a/drivers/net/i40e/i40e_rxtx.c
> > b/drivers/net/i40e/i40e_rxtx.c index
> > 2a28ee348..e9fa7ed90 100644
> > --- a/drivers/net/i40e/i40e_rxtx.c
> > +++ b/drivers/net/i40e/i40e_rxtx.c
> > @@ -2909,6 +2909,34 @@ i40e_txq_info_get(struct rte_eth_dev *dev,
> > uint16_t queue_id,
> >  	qinfo->conf.offloads = txq->offloads;  }
> >
> > +static eth_rx_burst_t
> > +i40e_get_latest_rx_vec(bool scatter)
> > +{
> > +#ifdef RTE_ARCH_X86
> > +	if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX2))
> > +		return scatter ? i40e_recv_scattered_pkts_vec_avx2 :
> > +				 i40e_recv_pkts_vec_avx2;
> > +#endif
> > +	return scatter ? i40e_recv_scattered_pkts_vec :
> > +			 i40e_recv_pkts_vec;
> > +}
> > +
> > +static eth_rx_burst_t
> > +i40e_get_recommend_rx_vec(bool scatter) { #ifdef RTE_ARCH_X86
> > +	/*
> > +	 * since AVX frequency can be different to base frequency, limit
> > +	 * use of AVX2 version to later plaforms, not all those that could
> > +	 * theoretically run it.
> > +	 */
> > +	if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX512F))
> > +		return scatter ? i40e_recv_scattered_pkts_vec_avx2 :
> > +				 i40e_recv_pkts_vec_avx2;
> > +#endif
> > +	return scatter ? i40e_recv_scattered_pkts_vec :
> > +			 i40e_recv_pkts_vec;
> > +}
> >  void __attribute__((cold))
> >  i40e_set_rx_function(struct rte_eth_dev *dev)  { @@ -2948,19 +2976,12
> > @@ i40e_set_rx_function(struct rte_eth_dev *dev)
> >  			PMD_INIT_LOG(DEBUG, "Using Vector Scattered Rx "
> >  					    "callback (port=%d).",
> >  				     dev->data->port_id);
> > -
> > -			dev->rx_pkt_burst = i40e_recv_scattered_pkts_vec;
> > -#ifdef RTE_ARCH_X86
> > -			/*
> > -			 * since AVX frequency can be different to base
> > -			 * frequency, limit use of AVX2 version to later
> > -			 * plaforms, not all those that could theoretically
> > -			 * run it.
> > -			 */
> > -			if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX512F))
> > +			if (ad->use_latest_vec)
> >  				dev->rx_pkt_burst =
> > -					i40e_recv_scattered_pkts_vec_avx2;
> > -#endif
> > +					i40e_get_latest_rx_vec(true);
> > +			else
> > +				dev->rx_pkt_burst =
> > +					i40e_get_recommend_rx_vec(true);
> >  		} else {
> >  			PMD_INIT_LOG(DEBUG, "Using a Scattered with bulk "
> >  					   "allocation callback (port=%d).", @@ -2978,18
> > +2999,10 @@ i40e_set_rx_function(struct rte_eth_dev *dev)
> >  				    "burst size no less than %d (port=%d).",
> >  			     RTE_I40E_DESCS_PER_LOOP,
> >  			     dev->data->port_id);
> > -
> > -		dev->rx_pkt_burst = i40e_recv_pkts_vec;
> > -#ifdef RTE_ARCH_X86
> > -		/*
> > -		 * since AVX frequency can be different to base
> > -		 * frequency, limit use of AVX2 version to later
> > -		 * plaforms, not all those that could theoretically
> > -		 * run it.
> > -		 */
> > -		if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX512F))
> > -			dev->rx_pkt_burst = i40e_recv_pkts_vec_avx2;
> > -#endif
> > +		if (ad->use_latest_vec)
> > +			dev->rx_pkt_burst = i40e_get_latest_rx_vec(false);
> > +		else
> > +			dev->rx_pkt_burst = i40e_get_recommend_rx_vec(false);
> 
> 
> How about simplify the code as below?
> 
> /* default */
> dev->rx_pkt_burst = dev->data->scattered_rx ?
> 		i40e_recv_scattered_pkts : i40e_recv_pkts;
> 
> if (ad->rx_vec_allowed) {
> 	/* overwrite by vec path*/
> 	if (ad->use_latest_vec)
> 		dev->rx_pkt_burst =
> i40e_get_latest_rx_vec(dev->data->scattered_rx);
> 	else
> 		dev->rx_pkt_burst =
> i40e_get_recommend_rx_vec(dev->data->scattered_rx);
> } else if (ad->rx_bulk_alloc_allowed) {

Sorry, I think it should be:
	else if (ad->rx_bulk_alloc_allowed && ! dev->data->scattered_rx) {

> 	/* or overwrite by bulk alloc */
> 	dev->rx_pkt_burst = i40e_recv_pkts_bulk_alloc; }
> 
> 
> >  	} else if (ad->rx_bulk_alloc_allowed) {
> >  		PMD_INIT_LOG(DEBUG, "Rx Burst Bulk Alloc Preconditions are "
> >  				    "satisfied. Rx Burst Bulk Alloc function "
> > @@ -3049,6 +3062,31 @@ i40e_set_tx_function_flag(struct rte_eth_dev
> > *dev, struct i40e_tx_queue *txq)
> >  				txq->queue_id);
> >  }
> >
> > +static eth_tx_burst_t
> > +i40e_get_latest_tx_vec(void)
> > +{
> > +#ifdef RTE_ARCH_X86
> > +	if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX2))
> > +		return i40e_xmit_pkts_vec_avx2;
> > +#endif
> > +	return i40e_xmit_pkts_vec;
> > +}
> > +
> > +static eth_tx_burst_t
> > +i40e_get_recommend_tx_vec(void)
> > +{
> > +#ifdef RTE_ARCH_X86
> > +	/*
> > +	 * since AVX frequency can be different to base frequency, limit
> > +	 * use of AVX2 version to later plaforms, not all those that could
> > +	 * theoretically run it.
> > +	 */
> > +	if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX512F))
> > +		return i40e_xmit_pkts_vec_avx2;
> > +#endif
> > +	return i40e_xmit_pkts_vec;
> > +}
> > +
> >  void __attribute__((cold))
> >  i40e_set_tx_function(struct rte_eth_dev *dev)  { @@ -3073,17 +3111,12
> > @@ i40e_set_tx_function(struct rte_eth_dev *dev)
> >  	if (ad->tx_simple_allowed) {
> >  		if (ad->tx_vec_allowed) {
> >  			PMD_INIT_LOG(DEBUG, "Vector tx finally be used.");
> > -			dev->tx_pkt_burst = i40e_xmit_pkts_vec;
> > -#ifdef RTE_ARCH_X86
> > -			/*
> > -			 * since AVX frequency can be different to base
> > -			 * frequency, limit use of AVX2 version to later
> > -			 * plaforms, not all those that could theoretically
> > -			 * run it.
> > -			 */
> > -			if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX512F))
> > -				dev->tx_pkt_burst = i40e_xmit_pkts_vec_avx2;
> > -#endif
> > +			if (ad->use_latest_vec)
> > +				dev->tx_pkt_burst =
> > +					i40e_get_latest_tx_vec();
> > +			else
> > +				dev->tx_pkt_burst =
> > +					i40e_get_recommend_tx_vec();
> >  		} else {
> >  			PMD_INIT_LOG(DEBUG, "Simple tx finally be used.");
> >  			dev->tx_pkt_burst = i40e_xmit_pkts_simple;
> > --
> > 2.17.1

  reply	other threads:[~2018-09-12  7:50 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-30  2:16 [dpdk-dev] [PATCH] " Xiaoyun Li
2018-08-31 11:24 ` [dpdk-dev] [PATCH v2] " Xiaoyun Li
2018-09-04 11:39 ` [dpdk-dev] [PATCH v3] " Xiaoyun Li
2018-09-05 12:21   ` Zhang, Qi Z
2018-09-07  9:23     ` Li, Xiaoyun
2018-09-10 10:17 ` [dpdk-dev] [PATCH v4] " Xiaoyun Li
2018-09-12  7:45   ` Zhang, Qi Z
2018-09-12  7:50     ` Zhang, Qi Z [this message]
2018-09-12 10:12 ` [dpdk-dev] [PATCH v5] " Xiaoyun Li
2018-09-13  1:38   ` Zhang, Qi Z
2018-09-13 13:27   ` Ferruh Yigit
2018-09-17  7:12     ` Li, Xiaoyun
2018-09-17  9:58 ` [dpdk-dev] [PATCH v6] net/i40e: add interface to use latest vec path Xiaoyun Li
2018-09-17 14:14   ` Ferruh Yigit
2018-09-17 14:37     ` Thomas Monjalon
2018-09-18  1:28       ` Li, Xiaoyun
2018-09-18  2:22 ` [dpdk-dev] [PATCH v7] " Xiaoyun Li
2018-09-18 13:01   ` Ferruh Yigit
2018-09-18 13:52     ` Zhang, Qi Z

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=039ED4275CED7440929022BC67E70611532843B7@SHSMSX103.ccr.corp.intel.com \
    --to=qi.z.zhang@intel.com \
    --cc=beilei.xing@intel.com \
    --cc=bruce.richardson@intel.com \
    --cc=david.hunt@intel.com \
    --cc=dev@dpdk.org \
    --cc=xiaoyun.li@intel.com \
    --cc=zhiyong.yang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).