From: David Hunt <david.hunt@intel.com>
To: Anatoly Burakov <anatoly.burakov@intel.com>, dev@dpdk.org
Cc: konstantin.ananyev@intel.com, ciara.loftus@intel.com
Subject: Re: [dpdk-dev] [PATCH v5 5/7] power: support callbacks for multiple Rx queues
Date: Wed, 30 Jun 2021 10:52:21 +0100 [thread overview]
Message-ID: <04557f14-b238-3daa-2753-b3437e59e640@intel.com> (raw)
In-Reply-To: <8f5d030a77aa2f0e95e9680cb911b4e8db30c879.1624981670.git.anatoly.burakov@intel.com>
Hi Anatoly,
On 29/6/2021 4:48 PM, Anatoly Burakov wrote:
> Currently, there is a hard limitation on the PMD power management
> support that only allows it to support a single queue per lcore. This is
> not ideal as most DPDK use cases will poll multiple queues per core.
>
> The PMD power management mechanism relies on ethdev Rx callbacks, so it
> is very difficult to implement such support because callbacks are
> effectively stateless and have no visibility into what the other ethdev
> devices are doing. This places limitations on what we can do within the
> framework of Rx callbacks, but the basics of this implementation are as
> follows:
>
> - Replace per-queue structures with per-lcore ones, so that any device
> polled from the same lcore can share data
> - Any queue that is going to be polled from a specific lcore has to be
> added to the list of queues to poll, so that the callback is aware of
> other queues being polled by the same lcore
> - Both the empty poll counter and the actual power saving mechanism is
> shared between all queues polled on a particular lcore, and is only
> activated when all queues in the list were polled and were determined
> to have no traffic.
> - The limitation on UMWAIT-based polling is not removed because UMWAIT
> is incapable of monitoring more than one address.
>
> Also, while we're at it, update and improve the docs.
>
> Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
> ---
>
> Notes:
> v5:
> - Remove the "power save queue" API and replace it with mechanism suggested by
> Konstantin
>
> v3:
> - Move the list of supported NICs to NIC feature table
>
> v2:
> - Use a TAILQ for queues instead of a static array
> - Address feedback from Konstantin
> - Add additional checks for stopped queues
>
> doc/guides/nics/features.rst | 10 +
> doc/guides/prog_guide/power_man.rst | 65 ++--
> doc/guides/rel_notes/release_21_08.rst | 3 +
> lib/power/rte_power_pmd_mgmt.c | 431 ++++++++++++++++++-------
> 4 files changed, 373 insertions(+), 136 deletions(-)
>
--snip--
> int
> rte_power_ethdev_pmgmt_queue_enable(unsigned int lcore_id, uint16_t port_id,
> uint16_t queue_id, enum rte_power_pmd_mgmt_type mode)
> {
> - struct pmd_queue_cfg *queue_cfg;
> + const union queue qdata = {.portid = port_id, .qid = queue_id};
> + struct pmd_core_cfg *lcore_cfg;
> + struct queue_list_entry *queue_cfg;
> struct rte_eth_dev_info info;
> rte_rx_callback_fn clb;
> int ret;
> @@ -202,9 +401,19 @@ rte_power_ethdev_pmgmt_queue_enable(unsigned int lcore_id, uint16_t port_id,
> goto end;
> }
>
> - queue_cfg = &port_cfg[port_id][queue_id];
> + lcore_cfg = &lcore_cfgs[lcore_id];
>
> - if (queue_cfg->pwr_mgmt_state != PMD_MGMT_DISABLED) {
> + /* check if other queues are stopped as well */
> + ret = cfg_queues_stopped(lcore_cfg);
> + if (ret != 1) {
> + /* error means invalid queue, 0 means queue wasn't stopped */
> + ret = ret < 0 ? -EINVAL : -EBUSY;
> + goto end;
> + }
> +
> + /* if callback was already enabled, check current callback type */
> + if (lcore_cfg->pwr_mgmt_state != PMD_MGMT_DISABLED &&
> + lcore_cfg->cb_mode != mode) {
> ret = -EINVAL;
> goto end;
> }
> @@ -214,53 +423,20 @@ rte_power_ethdev_pmgmt_queue_enable(unsigned int lcore_id, uint16_t port_id,
>
> switch (mode) {
> case RTE_POWER_MGMT_TYPE_MONITOR:
> - {
> - struct rte_power_monitor_cond dummy;
> -
> - /* check if rte_power_monitor is supported */
> - if (!global_data.intrinsics_support.power_monitor) {
> - RTE_LOG(DEBUG, POWER, "Monitoring intrinsics are not supported\n");
> - ret = -ENOTSUP;
> + /* check if we can add a new queue */
> + ret = check_monitor(lcore_cfg, &qdata);
> + if (ret < 0)
> goto end;
> - }
>
> - /* check if the device supports the necessary PMD API */
> - if (rte_eth_get_monitor_addr(port_id, queue_id,
> - &dummy) == -ENOTSUP) {
> - RTE_LOG(DEBUG, POWER, "The device does not support rte_eth_get_monitor_addr\n");
> - ret = -ENOTSUP;
> - goto end;
> - }
> clb = clb_umwait;
> break;
> - }
> case RTE_POWER_MGMT_TYPE_SCALE:
> - {
> - enum power_management_env env;
> - /* only PSTATE and ACPI modes are supported */
> - if (!rte_power_check_env_supported(PM_ENV_ACPI_CPUFREQ) &&
> - !rte_power_check_env_supported(
> - PM_ENV_PSTATE_CPUFREQ)) {
> - RTE_LOG(DEBUG, POWER, "Neither ACPI nor PSTATE modes are supported\n");
> - ret = -ENOTSUP;
> + /* check if we can add a new queue */
> + ret = check_scale(lcore_id);
> + if (ret < 0)
> goto end;
> - }
> - /* ensure we could initialize the power library */
> - if (rte_power_init(lcore_id)) {
> - ret = -EINVAL;
> - goto end;
> - }
> - /* ensure we initialized the correct env */
> - env = rte_power_get_env();
> - if (env != PM_ENV_ACPI_CPUFREQ &&
> - env != PM_ENV_PSTATE_CPUFREQ) {
> - RTE_LOG(DEBUG, POWER, "Neither ACPI nor PSTATE modes were initialized\n");
> - ret = -ENOTSUP;
> - goto end;
> - }
> clb = clb_scale_freq;
> break;
> - }
> case RTE_POWER_MGMT_TYPE_PAUSE:
> /* figure out various time-to-tsc conversions */
> if (global_data.tsc_per_us == 0)
> @@ -273,13 +449,23 @@ rte_power_ethdev_pmgmt_queue_enable(unsigned int lcore_id, uint16_t port_id,
> ret = -EINVAL;
> goto end;
> }
> + /* add this queue to the list */
> + ret = queue_list_add(lcore_cfg, &qdata);
> + if (ret < 0) {
> + RTE_LOG(DEBUG, POWER, "Failed to add queue to list: %s\n",
> + strerror(-ret));
> + goto end;
> + }
> + /* new queue is always added last */
> + queue_cfg = TAILQ_LAST(&lcore_cfgs->head, queue_list_head);
Need to ensure that queue_cfg gets set here, otherwise we'll get a
segfault below.
>
> /* initialize data before enabling the callback */
> - queue_cfg->empty_poll_stats = 0;
> - queue_cfg->cb_mode = mode;
> - queue_cfg->pwr_mgmt_state = PMD_MGMT_ENABLED;
> - queue_cfg->cur_cb = rte_eth_add_rx_callback(port_id, queue_id,
> - clb, NULL);
> + if (lcore_cfg->n_queues == 1) {
> + lcore_cfg->cb_mode = mode;
> + lcore_cfg->pwr_mgmt_state = PMD_MGMT_ENABLED;
> + }
> + queue_cfg->cb = rte_eth_add_rx_callback(port_id, queue_id,
> + clb, queue_cfg);
--snip--
next prev parent reply other threads:[~2021-06-30 9:52 UTC|newest]
Thread overview: 165+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-01 12:00 [dpdk-dev] [PATCH v1 0/7] Enhancements for PMD power management Anatoly Burakov
2021-06-01 12:00 ` [dpdk-dev] [PATCH v1 1/7] power_intrinsics: allow monitor checks inversion Anatoly Burakov
2021-06-21 12:56 ` Ananyev, Konstantin
2021-06-23 9:43 ` Burakov, Anatoly
2021-06-23 9:55 ` Ananyev, Konstantin
2021-06-23 10:00 ` Burakov, Anatoly
2021-06-23 11:00 ` Ananyev, Konstantin
2021-06-23 12:12 ` Burakov, Anatoly
2021-06-23 13:27 ` Ananyev, Konstantin
2021-06-23 14:13 ` Burakov, Anatoly
2021-06-24 9:47 ` Ananyev, Konstantin
2021-06-24 14:34 ` Burakov, Anatoly
2021-06-24 14:57 ` Ananyev, Konstantin
2021-06-24 15:04 ` Burakov, Anatoly
2021-06-24 15:25 ` Ananyev, Konstantin
2021-06-24 15:54 ` Burakov, Anatoly
2021-07-09 15:03 ` David Marchand
2021-06-01 12:00 ` [dpdk-dev] [PATCH v1 2/7] net/af_xdp: add power monitor support Anatoly Burakov
2021-06-02 12:59 ` Loftus, Ciara
2021-06-01 12:00 ` [dpdk-dev] [PATCH v1 3/7] eal: add power monitor for multiple events Anatoly Burakov
2021-06-01 12:00 ` [dpdk-dev] [PATCH v1 4/7] power: remove thread safety from PMD power API's Anatoly Burakov
2021-06-22 9:13 ` Ananyev, Konstantin
2021-06-23 9:46 ` Burakov, Anatoly
2021-06-23 9:52 ` Ananyev, Konstantin
2021-06-25 11:52 ` Burakov, Anatoly
2021-06-25 14:42 ` Ananyev, Konstantin
2021-06-01 12:00 ` [dpdk-dev] [PATCH v1 5/7] power: support callbacks for multiple Rx queues Anatoly Burakov
2021-06-22 9:41 ` Ananyev, Konstantin
2021-06-23 9:36 ` Burakov, Anatoly
2021-06-23 9:49 ` Ananyev, Konstantin
2021-06-23 9:56 ` Burakov, Anatoly
2021-06-01 12:00 ` [dpdk-dev] [PATCH v1 6/7] power: support monitoring " Anatoly Burakov
2021-06-01 12:00 ` [dpdk-dev] [PATCH v1 7/7] l3fwd-power: support multiqueue in PMD pmgmt modes Anatoly Burakov
2021-06-25 14:00 ` [dpdk-dev] [PATCH v2 0/7] Enhancements for PMD power management Anatoly Burakov
2021-06-25 14:00 ` [dpdk-dev] [PATCH v2 1/7] power_intrinsics: use callbacks for comparison Anatoly Burakov
2021-06-28 12:19 ` Ananyev, Konstantin
2021-06-25 14:00 ` [dpdk-dev] [PATCH v2 2/7] net/af_xdp: add power monitor support Anatoly Burakov
2021-06-25 14:00 ` [dpdk-dev] [PATCH v2 3/7] eal: add power monitor for multiple events Anatoly Burakov
2021-06-28 12:37 ` Ananyev, Konstantin
2021-06-28 12:43 ` Burakov, Anatoly
2021-06-28 12:58 ` Ananyev, Konstantin
2021-06-28 13:29 ` Burakov, Anatoly
2021-06-25 14:00 ` [dpdk-dev] [PATCH v2 4/7] power: remove thread safety from PMD power API's Anatoly Burakov
2021-06-25 14:00 ` [dpdk-dev] [PATCH v2 5/7] power: support callbacks for multiple Rx queues Anatoly Burakov
2021-06-28 7:10 ` David Marchand
2021-06-28 9:25 ` Burakov, Anatoly
2021-06-25 14:00 ` [dpdk-dev] [PATCH v2 6/7] power: support monitoring " Anatoly Burakov
2021-06-25 14:00 ` [dpdk-dev] [PATCH v2 7/7] l3fwd-power: support multiqueue in PMD pmgmt modes Anatoly Burakov
2021-06-28 12:41 ` [dpdk-dev] [PATCH v3 0/7] Enhancements for PMD power management Anatoly Burakov
2021-06-28 12:41 ` [dpdk-dev] [PATCH v3 1/7] power_intrinsics: use callbacks for comparison Anatoly Burakov
2021-06-28 12:41 ` [dpdk-dev] [PATCH v3 2/7] net/af_xdp: add power monitor support Anatoly Burakov
2021-06-28 12:41 ` [dpdk-dev] [PATCH v3 3/7] eal: add power monitor for multiple events Anatoly Burakov
2021-06-28 12:41 ` [dpdk-dev] [PATCH v3 4/7] power: remove thread safety from PMD power API's Anatoly Burakov
2021-06-28 12:41 ` [dpdk-dev] [PATCH v3 5/7] power: support callbacks for multiple Rx queues Anatoly Burakov
2021-06-28 12:41 ` [dpdk-dev] [PATCH v3 6/7] power: support monitoring " Anatoly Burakov
2021-06-28 13:29 ` Ananyev, Konstantin
2021-06-28 14:09 ` Burakov, Anatoly
2021-06-29 0:07 ` Ananyev, Konstantin
2021-06-29 11:05 ` Burakov, Anatoly
2021-06-29 11:39 ` Burakov, Anatoly
2021-06-29 12:14 ` Ananyev, Konstantin
2021-06-29 13:23 ` Burakov, Anatoly
2021-06-28 12:41 ` [dpdk-dev] [PATCH v3 7/7] l3fwd-power: support multiqueue in PMD pmgmt modes Anatoly Burakov
2021-06-28 15:54 ` [dpdk-dev] [PATCH v4 0/7] Enhancements for PMD power management Anatoly Burakov
2021-06-28 15:54 ` [dpdk-dev] [PATCH v4 1/7] power_intrinsics: use callbacks for comparison Anatoly Burakov
2021-06-28 15:54 ` [dpdk-dev] [PATCH v4 2/7] net/af_xdp: add power monitor support Anatoly Burakov
2021-06-28 15:54 ` [dpdk-dev] [PATCH v4 3/7] eal: add power monitor for multiple events Anatoly Burakov
2021-06-28 15:54 ` [dpdk-dev] [PATCH v4 4/7] power: remove thread safety from PMD power API's Anatoly Burakov
2021-06-28 15:54 ` [dpdk-dev] [PATCH v4 5/7] power: support callbacks for multiple Rx queues Anatoly Burakov
2021-06-28 15:54 ` [dpdk-dev] [PATCH v4 6/7] power: support monitoring " Anatoly Burakov
2021-06-28 15:54 ` [dpdk-dev] [PATCH v4 7/7] l3fwd-power: support multiqueue in PMD pmgmt modes Anatoly Burakov
2021-06-29 15:48 ` [dpdk-dev] [PATCH v5 0/7] Enhancements for PMD power management Anatoly Burakov
2021-06-29 15:48 ` [dpdk-dev] [PATCH v5 1/7] power_intrinsics: use callbacks for comparison Anatoly Burakov
2021-06-29 15:48 ` [dpdk-dev] [PATCH v5 2/7] net/af_xdp: add power monitor support Anatoly Burakov
2021-06-29 15:48 ` [dpdk-dev] [PATCH v5 3/7] eal: add power monitor for multiple events Anatoly Burakov
2021-06-29 15:48 ` [dpdk-dev] [PATCH v5 4/7] power: remove thread safety from PMD power API's Anatoly Burakov
2021-06-29 15:48 ` [dpdk-dev] [PATCH v5 5/7] power: support callbacks for multiple Rx queues Anatoly Burakov
2021-06-30 9:52 ` David Hunt [this message]
2021-07-01 9:01 ` David Hunt
2021-07-05 10:24 ` Burakov, Anatoly
2021-06-30 11:04 ` Ananyev, Konstantin
2021-07-05 10:23 ` Burakov, Anatoly
2021-06-29 15:48 ` [dpdk-dev] [PATCH v5 6/7] power: support monitoring " Anatoly Burakov
2021-06-30 10:29 ` Ananyev, Konstantin
2021-07-05 10:08 ` Burakov, Anatoly
2021-06-29 15:48 ` [dpdk-dev] [PATCH v5 7/7] l3fwd-power: support multiqueue in PMD pmgmt modes Anatoly Burakov
2021-07-05 15:21 ` [dpdk-dev] [PATCH v6 0/7] Enhancements for PMD power management Anatoly Burakov
2021-07-05 15:21 ` [dpdk-dev] [PATCH v6 1/7] power_intrinsics: use callbacks for comparison Anatoly Burakov
2021-07-05 15:21 ` [dpdk-dev] [PATCH v6 2/7] net/af_xdp: add power monitor support Anatoly Burakov
2021-07-05 15:21 ` [dpdk-dev] [PATCH v6 3/7] eal: add power monitor for multiple events Anatoly Burakov
2021-08-04 9:52 ` Kinsella, Ray
2021-07-05 15:21 ` [dpdk-dev] [PATCH v6 4/7] power: remove thread safety from PMD power API's Anatoly Burakov
2021-07-07 10:14 ` Ananyev, Konstantin
2021-07-05 15:22 ` [dpdk-dev] [PATCH v6 5/7] power: support callbacks for multiple Rx queues Anatoly Burakov
2021-07-06 18:50 ` Ananyev, Konstantin
2021-07-07 10:06 ` Burakov, Anatoly
2021-07-07 10:11 ` Ananyev, Konstantin
2021-07-07 11:54 ` Burakov, Anatoly
2021-07-07 12:51 ` Ananyev, Konstantin
2021-07-07 14:35 ` Burakov, Anatoly
2021-07-07 17:09 ` Ananyev, Konstantin
2021-07-07 10:04 ` David Hunt
2021-07-07 10:28 ` Burakov, Anatoly
2021-07-05 15:22 ` [dpdk-dev] [PATCH v6 6/7] power: support monitoring " Anatoly Burakov
2021-07-07 10:16 ` Ananyev, Konstantin
2021-07-05 15:22 ` [dpdk-dev] [PATCH v6 7/7] l3fwd-power: support multiqueue in PMD pmgmt modes Anatoly Burakov
2021-07-07 10:48 ` [dpdk-dev] [PATCH v7 0/7] Enhancements for PMD power management Anatoly Burakov
2021-07-07 10:48 ` [dpdk-dev] [PATCH v7 1/7] power_intrinsics: use callbacks for comparison Anatoly Burakov
2021-07-07 11:56 ` David Hunt
2021-07-07 10:48 ` [dpdk-dev] [PATCH v7 2/7] net/af_xdp: add power monitor support Anatoly Burakov
2021-07-07 10:48 ` [dpdk-dev] [PATCH v7 3/7] eal: add power monitor for multiple events Anatoly Burakov
2021-07-07 12:01 ` David Hunt
2021-07-07 10:48 ` [dpdk-dev] [PATCH v7 4/7] power: remove thread safety from PMD power API's Anatoly Burakov
2021-07-07 12:02 ` David Hunt
2021-07-07 10:48 ` [dpdk-dev] [PATCH v7 5/7] power: support callbacks for multiple Rx queues Anatoly Burakov
2021-07-07 11:54 ` David Hunt
2021-07-07 10:48 ` [dpdk-dev] [PATCH v7 6/7] power: support monitoring " Anatoly Burakov
2021-07-07 12:03 ` David Hunt
2021-07-07 10:48 ` [dpdk-dev] [PATCH v7 7/7] l3fwd-power: support multiqueue in PMD pmgmt modes Anatoly Burakov
2021-07-07 12:03 ` David Hunt
2021-07-08 14:13 ` [dpdk-dev] [PATCH v8 0/7] Enhancements for PMD power management Anatoly Burakov
2021-07-08 14:13 ` [dpdk-dev] [PATCH v8 1/7] power_intrinsics: use callbacks for comparison Anatoly Burakov
2021-07-08 16:56 ` McDaniel, Timothy
2021-07-09 13:46 ` Thomas Monjalon
2021-07-09 14:41 ` Burakov, Anatoly
2021-07-08 14:13 ` [dpdk-dev] [PATCH v8 2/7] net/af_xdp: add power monitor support Anatoly Burakov
2021-07-08 14:13 ` [dpdk-dev] [PATCH v8 3/7] eal: add power monitor for multiple events Anatoly Burakov
2021-07-08 14:13 ` [dpdk-dev] [PATCH v8 4/7] power: remove thread safety from PMD power API's Anatoly Burakov
2021-07-08 14:13 ` [dpdk-dev] [PATCH v8 5/7] power: support callbacks for multiple Rx queues Anatoly Burakov
2021-07-09 14:24 ` David Marchand
2021-07-09 14:42 ` Burakov, Anatoly
2021-07-09 14:46 ` David Marchand
2021-07-09 14:53 ` Burakov, Anatoly
2021-07-08 14:13 ` [dpdk-dev] [PATCH v8 6/7] power: support monitoring " Anatoly Burakov
2021-07-08 14:13 ` [dpdk-dev] [PATCH v8 7/7] l3fwd-power: support multiqueue in PMD pmgmt modes Anatoly Burakov
2021-07-09 14:50 ` David Marchand
2021-07-09 15:53 ` [dpdk-dev] [PATCH v9 0/8] Enhancements for PMD power management Anatoly Burakov
2021-07-09 15:53 ` [dpdk-dev] [PATCH v9 1/8] eal: use callbacks for power monitoring comparison Anatoly Burakov
2021-07-09 16:00 ` Anatoly Burakov
2021-07-09 15:53 ` [dpdk-dev] [PATCH v9 2/8] net/af_xdp: add power monitor support Anatoly Burakov
2021-07-09 16:00 ` Anatoly Burakov
2021-07-09 15:53 ` [dpdk-dev] [PATCH v9 3/8] doc: add PMD power management NIC feature Anatoly Burakov
2021-07-09 15:57 ` Burakov, Anatoly
2021-07-09 16:00 ` Anatoly Burakov
2021-07-09 15:53 ` [dpdk-dev] [PATCH v9 4/8] eal: add power monitor for multiple events Anatoly Burakov
2021-07-09 16:00 ` Anatoly Burakov
2021-07-09 15:53 ` [dpdk-dev] [PATCH v9 5/8] power: remove thread safety from PMD power API's Anatoly Burakov
2021-07-09 16:00 ` Anatoly Burakov
2021-07-09 15:53 ` [dpdk-dev] [PATCH v9 6/8] power: support callbacks for multiple Rx queues Anatoly Burakov
2021-07-09 16:00 ` Anatoly Burakov
2021-07-09 15:53 ` [dpdk-dev] [PATCH v9 7/8] power: support monitoring " Anatoly Burakov
2021-07-09 16:00 ` Anatoly Burakov
2021-07-09 15:53 ` [dpdk-dev] [PATCH v9 8/8] examples/l3fwd-power: support multiq in PMD modes Anatoly Burakov
2021-07-09 16:00 ` Anatoly Burakov
2021-07-09 16:00 ` [dpdk-dev] [PATCH v9 0/8] Enhancements for PMD power management Anatoly Burakov
2021-07-09 16:08 ` [dpdk-dev] [PATCH v10 " Anatoly Burakov
2021-07-09 16:08 ` [dpdk-dev] [PATCH v10 1/8] eal: use callbacks for power monitoring comparison Anatoly Burakov
2021-07-09 16:08 ` [dpdk-dev] [PATCH v10 2/8] net/af_xdp: add power monitor support Anatoly Burakov
2021-07-09 16:08 ` [dpdk-dev] [PATCH v10 3/8] doc: add PMD power management NIC feature Anatoly Burakov
2021-07-09 16:08 ` [dpdk-dev] [PATCH v10 4/8] eal: add power monitor for multiple events Anatoly Burakov
2021-07-09 16:08 ` [dpdk-dev] [PATCH v10 5/8] power: remove thread safety from PMD power API's Anatoly Burakov
2021-07-09 16:08 ` [dpdk-dev] [PATCH v10 6/8] power: support callbacks for multiple Rx queues Anatoly Burakov
2021-07-09 16:08 ` [dpdk-dev] [PATCH v10 7/8] power: support monitoring " Anatoly Burakov
2021-07-09 16:08 ` [dpdk-dev] [PATCH v10 8/8] examples/l3fwd-power: support multiq in PMD modes Anatoly Burakov
2021-07-09 19:24 ` [dpdk-dev] [PATCH v10 0/8] Enhancements for PMD power management David Marchand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=04557f14-b238-3daa-2753-b3437e59e640@intel.com \
--to=david.hunt@intel.com \
--cc=anatoly.burakov@intel.com \
--cc=ciara.loftus@intel.com \
--cc=dev@dpdk.org \
--cc=konstantin.ananyev@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).