From: Ferruh Yigit <ferruh.yigit@intel.com>
To: Xiao Wang <xiao.w.wang@intel.com>, wenzhuo.lu@intel.com
Cc: dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH 18/39] net/ixgbe/base: fix check on NACK
Date: Mon, 19 Sep 2016 18:07:15 +0100 [thread overview]
Message-ID: <0b71b81e-a025-bbc4-ad9d-1a14c0962735@intel.com> (raw)
In-Reply-To: <1472312902-16963-19-git-send-email-xiao.w.wang@intel.com>
On 8/27/2016 4:48 PM, Xiao Wang wrote:
> Previously we checked only msgbuf[0] for
"return buffer" instead of msgbuf[0] ?
> (IXGBE_VF_SET_MACVLAN | IXGBE_VT_MSGTYPE_NACK), but this would not
> work if index != 0 and as a result NACK will not be detected.
"write buffer is not 0" instead of "index != 0"
>
Function also starts using ixgbevf_write_msg_read_ack() instead of
separate write and read, is it possible to fix NACK only in this patch,
and do ixgbevf_write_msg_read_ack() switch in patch 27/39.
If prefer to keep in this patch, please mention about this switch in
comment log.
> Fixes: af75078fece3 ("first public release")
>
> Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
> ---
> drivers/net/ixgbe/base/ixgbe_vf.c | 18 ++++++++----------
> 1 file changed, 8 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/net/ixgbe/base/ixgbe_vf.c b/drivers/net/ixgbe/base/ixgbe_vf.c
> index c0fedea..f60ff7d 100644
> --- a/drivers/net/ixgbe/base/ixgbe_vf.c
> +++ b/drivers/net/ixgbe/base/ixgbe_vf.c
> @@ -529,8 +529,7 @@ s32 ixgbe_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr)
>
> s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr)
> {
> - struct ixgbe_mbx_info *mbx = &hw->mbx;
> - u32 msgbuf[3];
> + u32 msgbuf[3], msgbuf_chk;
> u8 *msg_addr = (u8 *)(&msgbuf[1]);
> s32 ret_val;
>
> @@ -543,18 +542,17 @@ s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr)
> */
> msgbuf[0] |= index << IXGBE_VT_MSGINFO_SHIFT;
> msgbuf[0] |= IXGBE_VF_SET_MACVLAN;
> + msgbuf_chk = msgbuf[0];
> if (addr)
> memcpy(msg_addr, addr, 6);
> - ret_val = mbx->ops.write_posted(hw, msgbuf, 3, 0);
>
> - if (!ret_val)
> - ret_val = mbx->ops.read_posted(hw, msgbuf, 3, 0);
> + ret_val = ixgbevf_write_msg_read_ack(hw, msgbuf, msgbuf, 3);
> + if (!ret_val) {
> + msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
>
> - msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
> -
> - if (!ret_val)
> - if (msgbuf[0] == (IXGBE_VF_SET_MACVLAN | IXGBE_VT_MSGTYPE_NACK))
> - ret_val = IXGBE_ERR_OUT_OF_MEM;
> + if (msgbuf[0] == (msgbuf_chk | IXGBE_VT_MSGTYPE_NACK))
> + return IXGBE_ERR_OUT_OF_MEM;
What about following instead of introducing msgbuf_chk:
if ((msgbuf[0] & IXGBE_VF_SET_MACVLAN) &&
(msgbuf[0] & IXGBE_VT_MSGTYPE_NACK))
Please check patch 15/39
> + }
>
> return ret_val;
> }
>
next prev parent reply other threads:[~2016-09-19 17:07 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-27 15:47 [dpdk-dev] [PATCH 00/39] net/ixgbe: base code update Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 01/39] net/ixgbe/base: fix delta check for setting VFTA Xiao Wang
2016-09-19 17:00 ` Ferruh Yigit
2016-09-22 15:58 ` Wang, Xiao W
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 00/40] net/ixgbe: base code update Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 01/40] net/ixgbe/base: fix delta check for setting VFTA Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 02/40] net/ixgbe/base: remove X550em SFP iXFI setup Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 03/40] net/ixgbe/base: change endianness of PHY data Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 04/40] net/ixgbe/base: add X550em_a 10G PHY support Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 05/40] net/ixgbe/base: move vf_update_xcast_mode to base code Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 06/40] net/ixgbe/base: introduce new ops init functions Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 07/40] net/ixgbe/base: separate PHY probe code Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 08/40] net/ixgbe/base: fully initialize X550em_a 1G PHYs Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 09/40] net/ixgbe/base: add macros for VF promiscuous mode Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 10/40] net/ixgbe/base: add FC setup for X550em_a fiber Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 11/40] net/ixgbe/base: add FC autoneg " Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 12/40] net/ixgbe/base: clear page register in error path Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 13/40] net/ixgbe/base: configure DMAC for 10Mb operation Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 14/40] net/ixgbe/base: fix function comments about X550 Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 15/40] net/ixgbe/base: report setting LPE register error Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 16/40] net/ixgbe/base: bump mailbox version Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 17/40] net/ixgbe/base: access IOSF by host interface Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 18/40] net/ixgbe/base: fix check on NACK Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 19/40] net/ixgbe/base: define X550 PCIe serial MAC addr Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 20/40] net/ixgbe/base: bypass checking link for crosstalk Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 21/40] net/ixgbe/base: support X550em_a SGMII FC autoneg Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 22/40] net/ixgbe/base: add macros for GENEVE UDP port Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 23/40] net/ixgbe/base: add bound check in LED functions Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 24/40] net/ixgbe/base: use default check link function Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 25/40] net/ixgbe/base: set default autoneg speed at reset Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 26/40] net/ixgbe/base: add missing FDIRSCTPM mask setting Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 27/40] net/ixgbe/base: commonize mailbox write and read Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 28/40] net/ixgbe/base: reduce delay for SWFW semaphore Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 29/40] net/ixgbe/base: report autoneg supported for X550 Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 30/40] net/ixgbe/base: remove X550em_a 100Mbps support Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 31/40] net/ixgbe/base: unify link speed value Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 32/40] net/ixgbe/base: separate ops init from PHY init Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 33/40] net/ixgbe/base: add X550em_a FW ALEF support Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 34/40] net/ixgbe/base: add two MAC ops for Hyper-V Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 35/40] net/ixgbe/base: hold semaphore for shadow RAM access Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 36/40] net/ixgbe/base: update X550em_a backplane speed Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 37/40] net/ixgbe/base: clean code of flow control autoneg Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 38/40] net/ixgbe/base: do not skip PHY configuration Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 39/40] net/ixgbe/base: clean up Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 40/40] net/ixgbe/base: add base driver update brief Xiao Wang
2016-09-26 2:06 ` [dpdk-dev] [PATCH v2 00/40] net/ixgbe: base code update Lu, Wenzhuo
2016-09-28 15:31 ` Bruce Richardson
2016-08-27 15:47 ` [dpdk-dev] [PATCH 02/39] net/ixgbe/base: remove X550em SFP iXFI setup Xiao Wang
2016-09-19 17:01 ` Ferruh Yigit
2016-08-27 15:47 ` [dpdk-dev] [PATCH 03/39] net/ixgbe/base: change endianness of PHY data Xiao Wang
2016-09-19 17:01 ` Ferruh Yigit
2016-09-25 0:36 ` Wang, Xiao W
2016-08-27 15:47 ` [dpdk-dev] [PATCH 04/39] net/ixgbe/base: add X550em_a 10G PHY support Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 05/39] net/ixgbe/base: support VF multicast promiscuous Xiao Wang
2016-09-19 17:05 ` Ferruh Yigit
2016-09-23 3:35 ` Wang, Xiao W
2016-08-27 15:47 ` [dpdk-dev] [PATCH 06/39] net/ixgbe/base: introduce new ops init functions Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 07/39] net/ixgbe/base: separate PHY probe code Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 08/39] net/ixgbe/base: fully initialize X550em_a 1G PHYs Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 09/39] net/ixgbe/base: add macros for VF promiscuous mode Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 10/39] net/ixgbe/base: add FC setup for X550em_a fiber Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 11/39] net/ixgbe/base: add FC autoneg " Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 12/39] net/ixgbe/base: clear page register in error path Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 13/39] net/ixgbe/base: configure DMAC for 10Mb operation Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 14/39] net/ixgbe/base: fix function comments about X550 Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 15/39] net/ixgbe/base: report setting LPE register error Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 16/39] net/ixgbe/base: bump mailbox version Xiao Wang
2016-09-19 17:03 ` Ferruh Yigit
2016-09-23 3:50 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 17/39] net/ixgbe/base: access IOSF by host interface Xiao Wang
2016-09-19 17:04 ` Ferruh Yigit
2016-09-23 5:16 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 18/39] net/ixgbe/base: fix check on NACK Xiao Wang
2016-09-19 17:07 ` Ferruh Yigit [this message]
2016-09-23 6:05 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 19/39] net/ixgbe/base: define X550 PCIe serial MAC addr Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 20/39] net/ixgbe/base: bypass checking link for crosstalk Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 21/39] net/ixgbe/base: support X550em_a SGMII FC autoneg Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 22/39] net/ixgbe/base: add macros for GENEVE UDP port Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 23/39] net/ixgbe/base: add bound check in LED functions Xiao Wang
2016-09-19 17:06 ` Ferruh Yigit
2016-09-22 16:08 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 24/39] net/ixgbe/base: use default check link function Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 25/39] net/ixgbe/base: set default autoneg speed at reset Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 26/39] net/ixgbe/base: add missing FDIRSCTPM mask setting Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 27/39] net/ixgbe/base: commonize mailbox write and read Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 28/39] net/ixgbe/base: reduce delay for SWFW semaphore Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 29/39] net/ixgbe/base: report autoneg supported for X550 Xiao Wang
2016-09-19 17:07 ` Ferruh Yigit
2016-09-23 0:59 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 30/39] net/ixgbe/base: remove X550em_a 100Mbps support Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 31/39] net/ixgbe/base: unify link speed value Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 32/39] net/ixgbe/base: separate ops init from PHY init Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 33/39] net/ixgbe/base: add X550em_a FW ALEF support Xiao Wang
2016-09-19 17:07 ` Ferruh Yigit
2016-09-22 2:56 ` Lu, Wenzhuo
2016-09-23 6:47 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 34/39] net/ixgbe/base: add two MAC ops for Hyper-V Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 35/39] net/ixgbe/base: hold semaphore for shadow RAM access Xiao Wang
2016-09-19 17:08 ` Ferruh Yigit
2016-09-23 8:06 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 36/39] net/ixgbe/base: update X550em_a backplane speed Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 37/39] net/ixgbe/base: clean code of flow control autoneg Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 38/39] net/ixgbe/base: do not skip PHY configuration Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 39/39] net/ixgbe/base: add base driver update brief Xiao Wang
2016-09-19 17:08 ` Ferruh Yigit
2016-09-22 2:55 ` Lu, Wenzhuo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0b71b81e-a025-bbc4-ad9d-1a14c0962735@intel.com \
--to=ferruh.yigit@intel.com \
--cc=dev@dpdk.org \
--cc=wenzhuo.lu@intel.com \
--cc=xiao.w.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).