DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jijiang Liu <jijiang.liu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2 3/4] i40e:add VF MAC filter
Date: Fri, 24 Oct 2014 15:58:44 +0800	[thread overview]
Message-ID: <1414137525-23582-4-git-send-email-jijiang.liu@intel.com> (raw)
In-Reply-To: <1414137525-23582-1-git-send-email-jijiang.liu@intel.com>

It mainly add i40e_vf_mac_filter_set() function to support perfect match and hash match of MAC address and VLAN ID for VF.

Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
---
 lib/librte_pmd_i40e/i40e_ethdev.c |  118 ++++++++++++++++++++++++++++++++++++-
 1 files changed, 116 insertions(+), 2 deletions(-)

diff --git a/lib/librte_pmd_i40e/i40e_ethdev.c b/lib/librte_pmd_i40e/i40e_ethdev.c
index 5fae0e1..f9e3aa8 100644
--- a/lib/librte_pmd_i40e/i40e_ethdev.c
+++ b/lib/librte_pmd_i40e/i40e_ethdev.c
@@ -1605,6 +1605,119 @@ i40e_macaddr_remove(struct rte_eth_dev *dev, uint32_t index)
 		memset(&pf->dev_addr, 0, sizeof(struct ether_addr));
 }
 
+/* Set perfect match or hash match of MAC and VLAN for a VF */
+static int
+i40e_vf_mac_filter_set(struct i40e_pf *pf,
+		 struct rte_eth_mac_filter *filter,
+		 bool add)
+{
+	struct i40e_hw *hw;
+	struct i40e_mac_filter_info mac_filter;
+	struct ether_addr old_mac;
+	struct ether_addr *new_mac;
+	struct i40e_pf_vf *vf = NULL;
+	uint16_t vf_id;
+	int ret;
+
+	if (pf == NULL) {
+		PMD_DRV_LOG(ERR, "Invalid PF argument\n");
+		return -EINVAL;
+	}
+	hw = I40E_PF_TO_HW(pf);
+
+	if (filter == NULL) {
+		PMD_DRV_LOG(ERR, "Invalid mac filter argument\n");
+		return -EINVAL;
+	}
+
+	new_mac = &filter->mac_addr;
+
+	if (is_zero_ether_addr(new_mac)) {
+		PMD_DRV_LOG(ERR, "Invalid ethernet address\n");
+		return -EINVAL;
+	}
+
+	vf_id = filter->dst_id;
+
+	if (vf_id > pf->vf_num - 1 || !pf->vfs) {
+		PMD_DRV_LOG(ERR, "Invalid argument\n");
+		return -EINVAL;
+	}
+	vf = &pf->vfs[vf_id];
+
+	if (add && is_same_ether_addr(new_mac, &(pf->dev_addr))) {
+		PMD_DRV_LOG(INFO, "Ignore adding permanent MAC address\n");
+		return -EINVAL;
+	}
+
+	if (add) {
+		(void)rte_memcpy(&old_mac, hw->mac.addr, ETHER_ADDR_LEN);
+		(void)rte_memcpy(hw->mac.addr, new_mac->addr_bytes,
+				ETHER_ADDR_LEN);
+		(void)rte_memcpy(&mac_filter.mac_addr, &filter->mac_addr,
+				 ETHER_ADDR_LEN);
+
+		mac_filter.filter_type = filter->filter_type;
+		ret = i40e_vsi_add_mac(vf->vsi, &mac_filter);
+		if (ret != I40E_SUCCESS) {
+			PMD_DRV_LOG(ERR, "Failed to add MAC filter\n");
+			return -1;
+		}
+		ether_addr_copy(new_mac, &pf->dev_addr);
+	} else {
+		(void)rte_memcpy(hw->mac.addr, hw->mac.perm_addr,
+				ETHER_ADDR_LEN);
+		ret = i40e_vsi_delete_mac(vf->vsi, &filter->mac_addr);
+		if (ret != I40E_SUCCESS) {
+			PMD_DRV_LOG(ERR, "Failed to delete MAC filter\n");
+			return -1;
+		}
+
+		/* Clear device address as it has been removed */
+		if (is_same_ether_addr(&(pf->dev_addr), new_mac))
+			memset(&pf->dev_addr, 0, sizeof(struct ether_addr));
+	}
+
+	return 0;
+}
+
+/* MAC filter handle */
+static int
+i40e_mac_filter_handle(struct rte_eth_dev *dev, enum rte_filter_op filter_op,
+		void *arg)
+{
+	struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+	struct rte_eth_mac_filter *filter;
+	struct i40e_hw *hw = I40E_PF_TO_HW(pf);
+	int ret = I40E_NOT_SUPPORTED;
+
+	filter = (struct rte_eth_mac_filter *)(arg);
+
+	switch (filter_op) {
+	case RTE_ETH_FILTER_NONE:
+		ret = I40E_SUCCESS;
+		break;
+	case RTE_ETH_FILTER_ADD:
+		i40e_pf_disable_irq0(hw);
+		if (filter->is_vf)
+			ret = i40e_vf_mac_filter_set(pf, filter, 1);
+		i40e_pf_enable_irq0(hw);
+		break;
+	case RTE_ETH_FILTER_DELETE:
+		i40e_pf_disable_irq0(hw);
+		if (filter->is_vf)
+			ret = i40e_vf_mac_filter_set(pf, filter, 0);
+		i40e_pf_enable_irq0(hw);
+		break;
+	default:
+		PMD_DRV_LOG(ERR, "unknown operation %u\n", filter_op);
+		ret = I40E_ERR_PARAM;
+		break;
+	}
+
+	return ret;
+}
+
 static int
 i40e_dev_rss_reta_update(struct rte_eth_dev *dev,
 			 struct rte_eth_rss_reta *reta_conf)
@@ -4243,13 +4356,14 @@ i40e_dev_filter_ctrl(struct rte_eth_dev *dev,
 		     void *arg)
 {
 	int ret = 0;
-	(void)filter_op;
-	(void)arg;
 
 	if (dev == NULL)
 		return -EINVAL;
 
 	switch (filter_type) {
+	case RTE_ETH_FILTER_MACVLAN:
+		ret = i40e_mac_filter_handle(dev, filter_op, arg);
+		 break;
 	default:
 		PMD_DRV_LOG(WARNING, "Filter type (%d) not supported",
 							filter_type);
-- 
1.7.7.6

  parent reply	other threads:[~2014-10-24  7:50 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-23  3:29 [dpdk-dev] [PATCH 0/5]support filter of unicast and multicast MAC address for VF on Fortville Jijiang Liu
2014-09-23  3:29 ` [dpdk-dev] [PATCH 1/5]librte_ether:use new filter framework Jijiang Liu
2014-09-23  3:29 ` [dpdk-dev] [PATCH 2/5]librte_ether:extend data structures of MACVLAN filter Jijiang Liu
2014-09-23  3:29 ` [dpdk-dev] [PATCH 3/5]i40e:optimize MACVLAN filter implementation Jijiang Liu
2014-09-23  3:29 ` [dpdk-dev] [PATCH 4/5]i40e:add VF MACVLAN filter implementation in librte_pmd_i40e Jijiang Liu
2014-09-23  3:29 ` [dpdk-dev] [PATCH 5/5]testpmd:test VF MACVLAN filter for i40e Jijiang Liu
2014-10-24  7:58 ` [dpdk-dev] [PATCH v2 0/4] support VF MAC filter on Fortville Jijiang Liu
2014-10-24  7:58   ` [dpdk-dev] [PATCH v2 1/4] librte_ether:extend MAC filter data structures Jijiang Liu
2014-10-24  7:58   ` [dpdk-dev] [PATCH v2 2/4] i40e:expand MAC filter implemantation in i40e Jijiang Liu
2014-10-24  7:58   ` Jijiang Liu [this message]
2014-10-24  7:58   ` [dpdk-dev] [PATCH v2 4/4] app/testpmd:test VF MAC filter Jijiang Liu
2014-10-30 22:35   ` [dpdk-dev] [PATCH v2 0/4] support VF MAC filter on Fortville Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1414137525-23582-4-git-send-email-jijiang.liu@intel.com \
    --to=jijiang.liu@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).