From: Ouyang Changchun <changchun.ouyang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 12/36] ixgbe base codes: Refine struct for physical information
Date: Thu, 12 Feb 2015 20:00:44 +0800 [thread overview]
Message-ID: <1423742468-30404-13-git-send-email-changchun.ouyang@intel.com> (raw)
In-Reply-To: <1423742468-30404-1-git-send-email-changchun.ouyang@intel.com>
Remove lan_id from struct ixgbe_phy_info.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
---
lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c | 4 +-
lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h | 1 -
lib/librte_pmd_ixgbe/ixgbe/ixgbe_x540.c | 2 +-
lib/librte_pmd_ixgbe/ixgbe/ixgbe_x550.c | 66 ++++++++++++++++-----------------
4 files changed, 34 insertions(+), 39 deletions(-)
diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c
index a1144d4..b19ef38 100644
--- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c
+++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c
@@ -283,9 +283,7 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
DEBUGFUNC("ixgbe_identify_phy_generic");
if (!hw->phy.phy_semaphore_mask) {
- hw->phy.lan_id = IXGBE_READ_REG(hw, IXGBE_STATUS) &
- IXGBE_STATUS_LAN_ID_1;
- if (hw->phy.lan_id)
+ if (hw->bus.lan_id)
hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM;
else
hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM;
diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h
index cac6387..23e45c2 100644
--- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h
+++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h
@@ -3600,7 +3600,6 @@ struct ixgbe_phy_info {
u32 revision;
enum ixgbe_media_type media_type;
u32 phy_semaphore_mask;
- u8 lan_id;
bool reset_disable;
ixgbe_autoneg_advertised autoneg_advertised;
enum ixgbe_smart_speed smart_speed;
diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_x540.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_x540.c
index c2d685f..6e8835d 100644
--- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_x540.c
+++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_x540.c
@@ -747,7 +747,7 @@ STATIC void ixgbe_set_mux(struct ixgbe_hw *hw, u8 state)
{
u32 esdp;
- if (!hw->phy.lan_id)
+ if (!hw->bus.lan_id)
return;
esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
if (state)
diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_x550.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_x550.c
index 3c76c3d..45315ec 100644
--- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_x550.c
+++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_x550.c
@@ -94,10 +94,8 @@ STATIC s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw)
switch (hw->device_id) {
case IXGBE_DEV_ID_X550EM_X_SFP:
/* set up for CS4227 usage */
- hw->phy.lan_id = IXGBE_READ_REG(hw, IXGBE_STATUS) &
- IXGBE_STATUS_LAN_ID_1;
hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
- if (hw->phy.lan_id) {
+ if (hw->bus.lan_id) {
esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
esdp |= IXGBE_ESDP_SDP1_DIR;
@@ -407,7 +405,7 @@ s32 ixgbe_setup_eee_X550(struct ixgbe_hw *hw, bool enable_eee)
} else if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR ||
hw->device_id == IXGBE_DEV_ID_X550EM_X) {
status = ixgbe_read_iosf_sb_reg_x550(hw,
- IXGBE_KRM_LINK_CTRL_1(hw->phy.lan_id),
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, &link_reg);
if (status != IXGBE_SUCCESS)
return status;
@@ -416,7 +414,7 @@ s32 ixgbe_setup_eee_X550(struct ixgbe_hw *hw, bool enable_eee)
IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX;
status = ixgbe_write_iosf_sb_reg_x550(hw,
- IXGBE_KRM_LINK_CTRL_1(hw->phy.lan_id),
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, link_reg);
if (status != IXGBE_SUCCESS)
return status;
@@ -438,7 +436,7 @@ s32 ixgbe_setup_eee_X550(struct ixgbe_hw *hw, bool enable_eee)
} else if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR ||
hw->device_id == IXGBE_DEV_ID_X550EM_X) {
status = ixgbe_read_iosf_sb_reg_x550(hw,
- IXGBE_KRM_LINK_CTRL_1(hw->phy.lan_id),
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, &link_reg);
if (status != IXGBE_SUCCESS)
return status;
@@ -447,7 +445,7 @@ s32 ixgbe_setup_eee_X550(struct ixgbe_hw *hw, bool enable_eee)
IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX);
status = ixgbe_write_iosf_sb_reg_x550(hw,
- IXGBE_KRM_LINK_CTRL_1(hw->phy.lan_id),
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, link_reg);
if (status != IXGBE_SUCCESS)
return status;
@@ -822,7 +820,7 @@ s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw)
/* The CS4227 slice address is the base address + the port-pair reg
* offset. I.e. Slice 0 = 0x12B0 and slice 1 = 0x22B0.
*/
- reg_slice = IXGBE_CS4227_SPARE24_LSB + (hw->phy.lan_id << 12);
+ reg_slice = IXGBE_CS4227_SPARE24_LSB + (hw->bus.lan_id << 12);
if (setup_linear)
edc_mode = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1;
@@ -914,10 +912,9 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) {
esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
- phy->lan_id = IXGBE_READ_REG(hw, IXGBE_STATUS) &
- IXGBE_STATUS_LAN_ID_1;
phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
- if (phy->lan_id) {
+
+ if (hw->bus.lan_id) {
esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
esdp |= IXGBE_ESDP_SDP1_DIR;
}
@@ -1059,7 +1056,7 @@ s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
u32 reg_val;
status = ixgbe_read_iosf_sb_reg_x550(hw,
- IXGBE_KRM_LINK_CTRL_1(hw->phy.lan_id),
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
if (status)
return status;
@@ -1081,7 +1078,7 @@ s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw)
/* Restart auto-negotiation. */
reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
status = ixgbe_write_iosf_sb_reg_x550(hw,
- IXGBE_KRM_LINK_CTRL_1(hw->phy.lan_id),
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
return status;
@@ -1100,35 +1097,36 @@ s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw)
/* Disable AN and force speed to 10G Serial. */
status = ixgbe_read_iosf_sb_reg_x550(hw,
- IXGBE_KRM_LINK_CTRL_1(hw->phy.lan_id),
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
if (status != IXGBE_SUCCESS)
return status;
+
reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
status = ixgbe_write_iosf_sb_reg_x550(hw,
- IXGBE_KRM_LINK_CTRL_1(hw->phy.lan_id),
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
if (status != IXGBE_SUCCESS)
return status;
/* Disable training protocol FSM. */
status = ixgbe_read_iosf_sb_reg_x550(hw,
- IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->phy.lan_id),
+ IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
if (status != IXGBE_SUCCESS)
return status;
reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL;
status = ixgbe_write_iosf_sb_reg_x550(hw,
- IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->phy.lan_id),
+ IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
if (status != IXGBE_SUCCESS)
return status;
/* Disable Flex from training TXFFE. */
status = ixgbe_read_iosf_sb_reg_x550(hw,
- IXGBE_KRM_DSP_TXFFE_STATE_4(hw->phy.lan_id),
+ IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
if (status != IXGBE_SUCCESS)
return status;
@@ -1136,12 +1134,12 @@ s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw)
reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
status = ixgbe_write_iosf_sb_reg_x550(hw,
- IXGBE_KRM_DSP_TXFFE_STATE_4(hw->phy.lan_id),
+ IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
if (status != IXGBE_SUCCESS)
return status;
status = ixgbe_read_iosf_sb_reg_x550(hw,
- IXGBE_KRM_DSP_TXFFE_STATE_5(hw->phy.lan_id),
+ IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
if (status != IXGBE_SUCCESS)
return status;
@@ -1149,14 +1147,14 @@ s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw)
reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN;
reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN;
status = ixgbe_write_iosf_sb_reg_x550(hw,
- IXGBE_KRM_DSP_TXFFE_STATE_5(hw->phy.lan_id),
+ IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
if (status != IXGBE_SUCCESS)
return status;
/* Enable override for coefficients. */
status = ixgbe_read_iosf_sb_reg_x550(hw,
- IXGBE_KRM_TX_COEFF_CTRL_1(hw->phy.lan_id),
+ IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
if (status != IXGBE_SUCCESS)
return status;
@@ -1165,20 +1163,20 @@ s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw)
reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN;
reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN;
status = ixgbe_write_iosf_sb_reg_x550(hw,
- IXGBE_KRM_TX_COEFF_CTRL_1(hw->phy.lan_id),
+ IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
if (status != IXGBE_SUCCESS)
return status;
/* Toggle port SW reset by AN reset. */
status = ixgbe_read_iosf_sb_reg_x550(hw,
- IXGBE_KRM_LINK_CTRL_1(hw->phy.lan_id),
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
if (status != IXGBE_SUCCESS)
return status;
reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART;
status = ixgbe_write_iosf_sb_reg_x550(hw,
- IXGBE_KRM_LINK_CTRL_1(hw->phy.lan_id),
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
return status;
@@ -1197,7 +1195,7 @@ s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw)
/* Disable AN and force speed to 10G Serial. */
status = ixgbe_read_iosf_sb_reg_x550(hw,
- IXGBE_KRM_LINK_CTRL_1(hw->phy.lan_id),
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
if (status != IXGBE_SUCCESS)
return status;
@@ -1205,47 +1203,47 @@ s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw)
reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK;
reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G;
status = ixgbe_write_iosf_sb_reg_x550(hw,
- IXGBE_KRM_LINK_CTRL_1(hw->phy.lan_id),
+ IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
if (status != IXGBE_SUCCESS)
return status;
/* Set near-end loopback clocks. */
status = ixgbe_read_iosf_sb_reg_x550(hw,
- IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->phy.lan_id),
+ IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
if (status != IXGBE_SUCCESS)
return status;
reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B;
reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS;
status = ixgbe_write_iosf_sb_reg_x550(hw,
- IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->phy.lan_id),
+ IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
if (status != IXGBE_SUCCESS)
return status;
/* Set loopback enable. */
status = ixgbe_read_iosf_sb_reg_x550(hw,
- IXGBE_KRM_PMD_DFX_BURNIN(hw->phy.lan_id),
+ IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
if (status != IXGBE_SUCCESS)
return status;
reg_val |= IXGBE_KRM_PMD_DFX_BURNIN_TX_RX_KR_LB_MASK;
status = ixgbe_write_iosf_sb_reg_x550(hw,
- IXGBE_KRM_PMD_DFX_BURNIN(hw->phy.lan_id),
+ IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
if (status != IXGBE_SUCCESS)
return status;
/* Training bypass. */
status = ixgbe_read_iosf_sb_reg_x550(hw,
- IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->phy.lan_id),
+ IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val);
if (status != IXGBE_SUCCESS)
return status;
reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_PROTOCOL_BYPASS;
status = ixgbe_write_iosf_sb_reg_x550(hw,
- IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->phy.lan_id),
+ IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id),
IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val);
return status;
@@ -1798,7 +1796,7 @@ void ixgbe_disable_rx_x550(struct ixgbe_hw *hw)
fw_cmd.hdr.cmd = FW_DISABLE_RXEN_CMD;
fw_cmd.hdr.buf_len = FW_DISABLE_RXEN_LEN;
fw_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM;
- fw_cmd.port_number = hw->phy.lan_id;
+ fw_cmd.port_number = (u8)hw->bus.lan_id;
status = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd,
sizeof(struct ixgbe_hic_disable_rxen),
--
1.8.4.2
next prev parent reply other threads:[~2015-02-12 12:01 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-12 12:00 [dpdk-dev] [PATCH 00/36] Update IXGBE base codes Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 01/36] ixgbe base codes: Code cleanup and minor changes Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 02/36] ixgbe base codes: Debug output macro Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 03/36] ixgbe base codes: Fix bus type issue Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 04/36] ixgbe base codes: Fix link speed issue Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 05/36] ixgbe base codes: Fix early return Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 06/36] ixgbe base codes: Update the CS address Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 07/36] ixgbe base codes: Extract function for management capability Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 08/36] ixgbe base codes: Set phy power Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 09/36] ixgbe base codes: Use mng present function Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 10/36] ixgbe base codes: Get host interface command status Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 11/36] ixgbe base codes: Refine function for host interface command Ouyang Changchun
2015-02-12 12:00 ` Ouyang Changchun [this message]
2015-02-12 12:00 ` [dpdk-dev] [PATCH 13/36] ixgbe base codes: Clear Tx pending Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 14/36] ixgbe base codes: Use IOMEM Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 15/36] ixgbe base codes: Update macros Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 16/36] ixgbe base codes: New phy ID Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 17/36] ixgbe base codes: Get bus info Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 18/36] ixgbe base codes: Restructure host interface command Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 19/36] ixgbe base codes: Fix mac type issue Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 20/36] ixgbe base codes: API for setup internal phy Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 21/36] ixgbe base codes: API for set phy power Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 22/36] ixgbe base codes: API for read i2c combined Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 23/36] ixgbe base codes: API for write " Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 24/36] ixgbe base codes: Support 5G link speed Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 25/36] ixgbe base codes: Refine branch statement Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 26/36] ixgbe base codes: SFP probe Ouyang Changchun
2015-02-12 12:00 ` [dpdk-dev] [PATCH 27/36] ixgbe base codes: Set LAN ID Ouyang Changchun
2015-02-12 12:01 ` [dpdk-dev] [PATCH 28/36] ixgbe base codes: Calculate checksum Ouyang Changchun
2015-02-12 12:01 ` [dpdk-dev] [PATCH 29/36] ixgbe base codes: Command for flow director Ouyang Changchun
2015-02-12 12:01 ` [dpdk-dev] [PATCH 30/36] ixgbe base codes: Auto-negotiation Ouyang Changchun
2015-02-12 12:01 ` [dpdk-dev] [PATCH 31/36] ixgbe base codes: Bit-bang mode Ouyang Changchun
2015-02-12 12:01 ` [dpdk-dev] [PATCH 32/36] ixgbe base codes: Setup kx4 phy Ouyang Changchun
2015-02-12 12:01 ` [dpdk-dev] [PATCH 33/36] ixgbe base codes: Read/write iosf sb stat Ouyang Changchun
2015-02-12 12:01 ` [dpdk-dev] [PATCH 34/36] ixgbe base codes: New device id Ouyang Changchun
2015-02-12 12:01 ` [dpdk-dev] [PATCH 36/36] eal: Add 2 device ids for ixgbe Ouyang Changchun
2015-02-27 14:54 ` [dpdk-dev] [PATCH 00/36] Update IXGBE base codes Liu, Jijiang
2015-04-27 14:59 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423742468-30404-13-git-send-email-changchun.ouyang@intel.com \
--to=changchun.ouyang@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).