From: Tetsuya Mukawa <mukawa@igel.co.jp>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 1/3] BSD: Support Port Hotplug function
Date: Wed, 4 Mar 2015 12:11:41 +0900 [thread overview]
Message-ID: <1425438703-18895-1-git-send-email-mukawa@igel.co.jp> (raw)
This patch adds Hotplug support to BSD.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
---
lib/librte_eal/bsdapp/eal/eal_pci.c | 169 +++++++++++++++++++++++++-
lib/librte_eal/bsdapp/eal/rte_eal_version.map | 6 +
lib/librte_eal/common/include/rte_pci.h | 1 +
lib/librte_ether/rte_ethdev.c | 1 +
4 files changed, 174 insertions(+), 3 deletions(-)
diff --git a/lib/librte_eal/bsdapp/eal/eal_pci.c b/lib/librte_eal/bsdapp/eal/eal_pci.c
index 9193f80..fc5a088 100644
--- a/lib/librte_eal/bsdapp/eal/eal_pci.c
+++ b/lib/librte_eal/bsdapp/eal/eal_pci.c
@@ -156,6 +156,26 @@ fail:
return NULL;
}
+/* unmap a particular resource */
+static int
+pci_unmap_resource(void *requested_addr, size_t size)
+{
+ if (requested_addr == NULL)
+ return -EINVAL;
+
+ /* Unmap the PCI memory resource of device */
+ if (munmap(requested_addr, size)) {
+ RTE_LOG(ERR, EAL, "%s(): cannot munmap(%p, 0x%lx): %s\n",
+ __func__, requested_addr, (unsigned long)size,
+ strerror(errno));
+ } else {
+ RTE_LOG(DEBUG, EAL, " PCI memory unmapped at %p\n",
+ requested_addr);
+ return -EFAULT;
+ }
+ return 0;
+}
+
static int
pci_uio_map_secondary(struct rte_pci_device *dev)
{
@@ -270,6 +290,76 @@ pci_uio_map_resource(struct rte_pci_device *dev)
return (0);
}
+static int
+pci_uio_unmap(struct uio_resource *uio_res)
+{
+ int ret;
+ unsigned i;
+
+ if (uio_res == NULL)
+ return -EINVAL;
+
+ for (i = 0; i != uio_res->nb_maps; i++) {
+ ret = pci_unmap_resource(uio_res->maps[i].addr,
+ (size_t)uio_res->maps[i].size);
+ if (ret < 0)
+ return ret;
+ }
+ return 0;
+}
+
+static struct uio_resource *
+pci_uio_find_resource(struct rte_pci_device *dev)
+{
+ struct uio_resource *uio_res;
+
+ if (dev == NULL)
+ return NULL;
+
+ TAILQ_FOREACH(uio_res, uio_res_list, next) {
+
+ /* skip this element if it doesn't match our PCI address */
+ if (!rte_eal_compare_pci_addr(&uio_res->pci_addr, &dev->addr))
+ return uio_res;
+ }
+ return NULL;
+}
+
+/* map the PCI resource of a PCI device in virtual memory */
+static int
+pci_uio_unmap_resource(struct rte_pci_device *dev)
+{
+ struct uio_resource *uio_res;
+
+ if (dev == NULL)
+ return -EINVAL;
+
+ /* find an entry for the device */
+ uio_res = pci_uio_find_resource(dev);
+ if (uio_res == NULL)
+ return -ENODEV;
+
+ /* secondary processes - just free maps */
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return pci_uio_unmap(uio_res);
+
+ TAILQ_REMOVE(uio_res_list, uio_res, next);
+
+ /* unmap all resources */
+ pci_uio_unmap(uio_res);
+
+ /* free_uio resource */
+ rte_free(uio_res);
+
+ /* close fd if in primary process */
+ close(dev->intr_handle.fd);
+
+ dev->intr_handle.fd = -1;
+ dev->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
+
+ return 0;
+}
+
/* Scan one pci sysfs entry, and fill the devices list from it. */
static int
pci_scan_one(int dev_pci_fd, struct pci_conf *conf)
@@ -307,6 +397,9 @@ pci_scan_one(int dev_pci_fd, struct pci_conf *conf)
/* FreeBSD has no NUMA support (yet) */
dev->numa_node = 0;
+ /* FreeBSD has only one pass through driver */
+ dev->pt_driver = RTE_PT_NIC_UIO;
+
/* parse resources */
switch (conf->pc_hdr & PCIM_HDRTYPE) {
case PCIM_HDRTYPE_NORMAL:
@@ -376,8 +469,8 @@ skipdev:
* Scan the content of the PCI bus, and add the devices in the devices
* list. Call pci_scan_one() for each pci entry found.
*/
-static int
-pci_scan(void)
+int
+rte_eal_pci_scan(void)
{
int fd = -1;
unsigned dev_count = 0;
@@ -487,6 +580,76 @@ rte_eal_pci_probe_one_driver(struct rte_pci_driver *dr, struct rte_pci_device *d
return 1;
}
+/*
+ * If vendor/device ID match, call the devuninit() function of the
+ * driver.
+ */
+int
+rte_eal_pci_close_one_driver(struct rte_pci_driver *dr,
+ struct rte_pci_device *dev)
+{
+ struct rte_pci_id *id_table;
+ int ret;
+
+ if ((dr == NULL) || (dev == NULL))
+ return -EINVAL;
+
+ for (id_table = dr->id_table ; id_table->vendor_id != 0; id_table++) {
+
+ /* check if device's identifiers match the driver's ones */
+ if (id_table->vendor_id != dev->id.vendor_id &&
+ id_table->vendor_id != PCI_ANY_ID)
+ continue;
+ if (id_table->device_id != dev->id.device_id &&
+ id_table->device_id != PCI_ANY_ID)
+ continue;
+ if (id_table->subsystem_vendor_id !=
+ dev->id.subsystem_vendor_id &&
+ id_table->subsystem_vendor_id != PCI_ANY_ID)
+ continue;
+ if (id_table->subsystem_device_id !=
+ dev->id.subsystem_device_id &&
+ id_table->subsystem_device_id != PCI_ANY_ID)
+ continue;
+
+ struct rte_pci_addr *loc = &dev->addr;
+
+ RTE_LOG(DEBUG, EAL,
+ "PCI device "PCI_PRI_FMT" on NUMA socket %i\n",
+ loc->domain, loc->bus, loc->devid, loc->function,
+ dev->numa_node);
+
+ RTE_LOG(DEBUG, EAL,
+ " remove driver: %x:%x %s\n", dev->id.vendor_id,
+ dev->id.device_id, dr->name);
+
+ /* no initialization when blacklisted, return without error */
+ if (dev->devargs != NULL &&
+ dev->devargs->type == RTE_DEVTYPE_BLACKLISTED_PCI) {
+
+ RTE_LOG(DEBUG, EAL,
+ " Device is blacklisted, not initializing\n");
+ return 0;
+ }
+
+ /* call the driver devuninit() function */
+ if (dr->devuninit && (dr->devuninit(dev) < 0))
+ return -1; /* negative value is an error */
+
+ /* clear driver structure */
+ dev->driver = NULL;
+
+ if (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING) {
+ /* map resources for devices that use igb_uio */
+ ret = pci_uio_unmap_resource(dev);
+ if (ret != 0)
+ return ret;
+ }
+ }
+ /* return positive value if driver is not found */
+ return 1;
+}
+
/* Init the PCI EAL subsystem */
int
rte_eal_pci_init(void)
@@ -499,7 +662,7 @@ rte_eal_pci_init(void)
if (internal_config.no_pci)
return 0;
- if (pci_scan() < 0) {
+ if (rte_eal_pci_scan() < 0) {
RTE_LOG(ERR, EAL, "%s(): Cannot scan PCI bus\n", __func__);
return -1;
}
diff --git a/lib/librte_eal/bsdapp/eal/rte_eal_version.map b/lib/librte_eal/bsdapp/eal/rte_eal_version.map
index d83524d..54f5ff1 100644
--- a/lib/librte_eal/bsdapp/eal/rte_eal_version.map
+++ b/lib/librte_eal/bsdapp/eal/rte_eal_version.map
@@ -37,9 +37,13 @@ DPDK_2.0 {
rte_eal_lcore_role;
rte_eal_mp_remote_launch;
rte_eal_mp_wait_lcore;
+ rte_eal_parse_devargs_str;
+ rte_eal_pci_close_one;
rte_eal_pci_dump;
rte_eal_pci_probe;
+ rte_eal_pci_probe_one;
rte_eal_pci_register;
+ rte_eal_pci_scan;
rte_eal_pci_unregister;
rte_eal_process_type;
rte_eal_remote_launch;
@@ -47,6 +51,8 @@ DPDK_2.0 {
rte_eal_tailq_lookup_by_idx;
rte_eal_tailq_reserve;
rte_eal_tailq_reserve_by_idx;
+ rte_eal_vdev_init;
+ rte_eal_vdev_uninit;
rte_eal_wait_lcore;
rte_exit;
rte_get_hpet_cycles;
diff --git a/lib/librte_eal/common/include/rte_pci.h b/lib/librte_eal/common/include/rte_pci.h
index b9cdf8b..dc74821 100644
--- a/lib/librte_eal/common/include/rte_pci.h
+++ b/lib/librte_eal/common/include/rte_pci.h
@@ -147,6 +147,7 @@ enum rte_pt_driver {
RTE_PT_IGB_UIO = 1,
RTE_PT_VFIO = 2,
RTE_PT_UIO_GENERIC = 3,
+ RTE_PT_NIC_UIO = 4, /* Driver for BSD */
};
/**
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 6ea7a17..9687fab 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -516,6 +516,7 @@ rte_eth_dev_is_detachable(uint8_t port_id)
switch (rte_eth_devices[port_id].pci_dev->pt_driver) {
case RTE_PT_IGB_UIO:
case RTE_PT_UIO_GENERIC:
+ case RTE_PT_NIC_UIO:
break;
case RTE_PT_VFIO:
default:
--
1.9.1
next reply other threads:[~2015-03-04 3:12 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-04 3:11 Tetsuya Mukawa [this message]
2015-03-04 3:11 ` [dpdk-dev] [PATCH 2/3] eal, ethdev: Remove CONFIG_RTE_LIBRTE_EAL_HOTPLUG Tetsuya Mukawa
2015-03-04 3:11 ` [dpdk-dev] [PATCH 3/3] doc: Remove BSD limitation from hotplug section of programmer's guide Tetsuya Mukawa
2015-03-06 10:32 ` [dpdk-dev] [PATCH 1/3] BSD: Support Port Hotplug function Iremonger, Bernard
2015-03-09 2:23 ` Tetsuya Mukawa
2015-03-12 10:24 ` Tetsuya Mukawa
2015-03-12 10:17 ` [dpdk-dev] [PATCH v2 00/15] eal: Port Hotplug support for BSD Tetsuya Mukawa
2015-03-12 10:17 ` [dpdk-dev] [PATCH v2 01/15] eal: Fix cording style of eal_pci.c and eal_pci_uio.c Tetsuya Mukawa
2015-03-12 10:48 ` Bruce Richardson
2015-03-12 10:57 ` Qiu, Michael
2015-03-12 11:09 ` Bruce Richardson
2015-03-13 0:25 ` Tetsuya Mukawa
2015-03-12 10:17 ` [dpdk-dev] [PATCH v2 02/15] eal: Close file descriptor of uio configuration Tetsuya Mukawa
2015-03-13 13:54 ` Iremonger, Bernard
2015-03-12 10:17 ` [dpdk-dev] [PATCH v2 03/15] eal: Fix memory leak of pci_uio_map_resource() Tetsuya Mukawa
2015-03-13 14:04 ` Iremonger, Bernard
2015-03-17 9:30 ` [dpdk-dev] [PATCH 0/6] Clean up pci uio implementations Tetsuya Mukawa
2015-03-17 9:30 ` [dpdk-dev] [PATCH 1/6] eal: Fix cording style of eal_pci.c and eal_pci_uio.c Tetsuya Mukawa
2015-03-18 14:29 ` Bruce Richardson
2015-03-18 15:08 ` David Marchand
2015-03-17 9:30 ` [dpdk-dev] [PATCH 2/6] eal: Close file descriptor of uio configuration Tetsuya Mukawa
2015-03-18 15:19 ` David Marchand
2015-03-20 1:53 ` Tetsuya Mukawa
2015-03-19 16:04 ` Iremonger, Bernard
2015-03-20 1:54 ` Tetsuya Mukawa
2015-03-17 9:30 ` [dpdk-dev] [PATCH 3/6] eal: Fix memory leaks and needless incrementation of pci uio implementation Tetsuya Mukawa
2015-03-18 15:39 ` David Marchand
2015-03-20 1:53 ` Tetsuya Mukawa
2015-03-19 16:20 ` Iremonger, Bernard
2015-03-20 1:54 ` Tetsuya Mukawa
2015-03-17 9:30 ` [dpdk-dev] [PATCH 4/6] eal/bsdapp: Change names of pci related data structure Tetsuya Mukawa
2015-03-17 9:30 ` [dpdk-dev] [PATCH 5/6] eal: Use map_idx in pci_uio_map_resource() of bsdapp to work same as linuxapp Tetsuya Mukawa
2015-03-17 9:30 ` [dpdk-dev] [PATCH 6/6] eal: Fix interface of pci_map_resource() Tetsuya Mukawa
2015-03-20 9:53 ` Iremonger, Bernard
2015-03-24 4:18 ` Tetsuya Mukawa
2015-03-24 4:18 ` [dpdk-dev] [PATCH v2 0/6] Clean up pci uio implementations Tetsuya Mukawa
2015-03-24 4:18 ` [dpdk-dev] [PATCH v2 1/6] eal: Fix coding style of eal_pci.c and eal_pci_uio.c Tetsuya Mukawa
2015-03-24 4:18 ` [dpdk-dev] [PATCH v2 2/6] eal: Close file descriptor of uio configuration Tetsuya Mukawa
2015-03-24 18:33 ` Stephen Hemminger
2015-03-25 3:17 ` Tetsuya Mukawa
2015-03-25 5:07 ` Stephen Hemminger
2015-03-26 4:19 ` Tetsuya Mukawa
2015-03-26 10:03 ` Iremonger, Bernard
2015-03-27 6:01 ` Tetsuya Mukawa
2015-03-24 4:18 ` [dpdk-dev] [PATCH v2 3/6] eal: Fix memory leaks and needless increment of pci_map_addr Tetsuya Mukawa
2015-03-25 15:00 ` Iremonger, Bernard
2015-03-26 2:44 ` Tetsuya Mukawa
2015-03-24 4:18 ` [dpdk-dev] [PATCH v2 4/6] eal/bsdapp: Change names of pci related data structure Tetsuya Mukawa
2015-03-24 4:18 ` [dpdk-dev] [PATCH v2 5/6] eal: Use map_idx in pci_uio_map_resource() of bsdapp to work same as linuxapp Tetsuya Mukawa
2015-03-25 15:27 ` Iremonger, Bernard
2015-03-26 2:50 ` Tetsuya Mukawa
2015-03-26 10:41 ` Iremonger, Bernard
2015-03-27 8:19 ` Tetsuya Mukawa
2015-03-24 4:18 ` [dpdk-dev] [PATCH v2 6/6] eal: Fix interface of pci_map_resource() Tetsuya Mukawa
2015-03-25 15:03 ` Iremonger, Bernard
2015-03-27 8:39 ` [dpdk-dev] [PATCH v3 0/5] Clean up pci uio implementations Tetsuya Mukawa
2015-03-27 8:39 ` [dpdk-dev] [PATCH v3 1/5] eal: Fix coding style of eal_pci.c and eal_pci_uio.c Tetsuya Mukawa
2015-03-27 8:39 ` [dpdk-dev] [PATCH v3 2/5] eal: Close file descriptor of uio configuration Tetsuya Mukawa
2015-03-27 8:39 ` [dpdk-dev] [PATCH v3 3/5] eal: Fix memory leaks and needless increment of pci_map_addr Tetsuya Mukawa
2015-03-27 8:39 ` [dpdk-dev] [PATCH v3 4/5] eal/bsdapp: Change names of pci related data structure Tetsuya Mukawa
2015-03-27 8:39 ` [dpdk-dev] [PATCH v3 5/5] eal: Fix uio mapping differences between linuxapp and bsdapp Tetsuya Mukawa
2015-04-21 13:15 ` [dpdk-dev] [PATCH v3 0/5] Clean up pci uio implementations Iremonger, Bernard
2015-04-23 4:23 ` Tetsuya Mukawa
2015-04-23 8:12 ` Iremonger, Bernard
2015-04-23 9:48 ` Tetsuya Mukawa
2015-03-12 10:17 ` [dpdk-dev] [PATCH v2 04/15] eal: Fix needless incrementation of pci_map_addr Tetsuya Mukawa
2015-03-13 14:49 ` Iremonger, Bernard
2015-03-12 10:17 ` [dpdk-dev] [PATCH v2 05/15] eal/bsdapp: Change names of pci related data structure Tetsuya Mukawa
2015-03-12 10:17 ` [dpdk-dev] [PATCH v2 06/15] eal: Use map_idx in pci_uio_map_resource() of bsdapp to work same as linuxapp Tetsuya Mukawa
2015-03-12 10:17 ` [dpdk-dev] [PATCH v2 07/15] eal: Fix interface of pci_map_resource() of bsdapp Tetsuya Mukawa
2015-03-12 11:04 ` Bruce Richardson
2015-03-12 10:17 ` [dpdk-dev] [PATCH v2 08/15] eal: Add pci_uio_alloc_uio_resource() Tetsuya Mukawa
2015-03-12 10:17 ` [dpdk-dev] [PATCH v2 09/15] eal: Add pci_uio_map_uio_resource_by_index() Tetsuya Mukawa
2015-03-12 10:17 ` [dpdk-dev] [PATCH v2 10/15] eal: Consolidate pci_map and mapped_pci_resource of linuxapp and bsdapp Tetsuya Mukawa
2015-03-12 10:17 ` [dpdk-dev] [PATCH v2 11/15] eal: Consolidate rte_eal_pci_probe/close_one_driver() " Tetsuya Mukawa
2015-03-13 15:03 ` Iremonger, Bernard
2015-03-12 10:17 ` [dpdk-dev] [PATCH v2 12/15] eal: Consolidate pci_map/unmap_device() " Tetsuya Mukawa
2015-03-13 15:10 ` Iremonger, Bernard
2015-03-12 10:17 ` [dpdk-dev] [PATCH v2 13/15] eal: Consolidate pci_map/unmap_resource() " Tetsuya Mukawa
2015-03-13 15:23 ` Iremonger, Bernard
2015-03-12 10:17 ` [dpdk-dev] [PATCH v2 14/15] eal: Consolidate pci uio functions " Tetsuya Mukawa
2015-03-12 10:17 ` [dpdk-dev] [PATCH v2 15/15] eal: Enable Port Hotplug as default in Linux and BSD Tetsuya Mukawa
2015-03-13 15:47 ` Iremonger, Bernard
2015-03-17 8:08 ` Tetsuya Mukawa
2015-03-19 11:41 ` Iremonger, Bernard
2015-03-13 11:46 ` [dpdk-dev] [PATCH v2 00/15] eal: Port Hotplug support for BSD Iremonger, Bernard
2015-03-16 3:36 ` Tetsuya Mukawa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425438703-18895-1-git-send-email-mukawa@igel.co.jp \
--to=mukawa@igel.co.jp \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).