DPDK patches and discussions
 help / color / mirror / Atom feed
From: Helin Zhang <helin.zhang@intel.com>
To: dev@dpdk.org
Cc: monica.kenguva@intel.com, steven.j.murray@intel.com,
	shannon.nelson@intel.com
Subject: [dpdk-dev] [PATCH v2 33/33] i40e/base: modifications for future use
Date: Thu, 30 Apr 2015 23:03:39 +0800	[thread overview]
Message-ID: <1430406219-23901-34-git-send-email-helin.zhang@intel.com> (raw)
In-Reply-To: <1430406219-23901-1-git-send-email-helin.zhang@intel.com>

Miscellaneous modifications are added as follows for future use.
- Admin queue command opcodes
- struct i40e_aqc_arp_proxy_data
- struct i40e_aq_set_phy_config
- struct i40e_aqc_nvm_config_data_immediate_field
- struct i40e_aqc_oem_param_change
- struct i40e_aqc_opc_oem_ocsd_initialize
- struct i40e_aqc_opc_oem_ocbb_initialize
In addition, sturcture and command length check at compile time
are added for each admin queue opcodes in order to report any
potential issues as early as possible.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
---
 lib/librte_pmd_i40e/i40e/i40e_adminq_cmd.h | 89 +++++++++++++++++++++++++++---
 1 file changed, 80 insertions(+), 9 deletions(-)

diff --git a/lib/librte_pmd_i40e/i40e/i40e_adminq_cmd.h b/lib/librte_pmd_i40e/i40e/i40e_adminq_cmd.h
index ac410a5..6fd99b7 100644
--- a/lib/librte_pmd_i40e/i40e/i40e_adminq_cmd.h
+++ b/lib/librte_pmd_i40e/i40e/i40e_adminq_cmd.h
@@ -277,6 +277,8 @@ enum i40e_admin_queue_opc {
 	/* OEM commands */
 	i40e_aqc_opc_oem_parameter_change	= 0xFE00,
 	i40e_aqc_opc_oem_device_status_change	= 0xFE01,
+	i40e_aqc_opc_oem_ocsd_initialize	= 0xFE02,
+	i40e_aqc_opc_oem_ocbb_initialize	= 0xFE03,
 
 	/* debug commands */
 	i40e_aqc_opc_debug_get_deviceid		= 0xFF00,
@@ -285,7 +287,6 @@ enum i40e_admin_queue_opc {
 	i40e_aqc_opc_debug_write_reg		= 0xFF04,
 	i40e_aqc_opc_debug_modify_reg		= 0xFF07,
 	i40e_aqc_opc_debug_dump_internals	= 0xFF08,
-	i40e_aqc_opc_debug_modify_internals	= 0xFF09,
 };
 
 /* command structures and indirect data structures */
@@ -419,6 +420,7 @@ struct i40e_aqc_list_capabilities_element_resp {
 #define I40E_AQ_CAP_ID_VSI		0x0017
 #define I40E_AQ_CAP_ID_DCB		0x0018
 #define I40E_AQ_CAP_ID_FCOE		0x0021
+#define I40E_AQ_CAP_ID_ISCSI		0x0022
 #define I40E_AQ_CAP_ID_RSS		0x0040
 #define I40E_AQ_CAP_ID_RXQ		0x0041
 #define I40E_AQ_CAP_ID_TXQ		0x0042
@@ -463,8 +465,11 @@ struct i40e_aqc_arp_proxy_data {
 	__le32	pfpm_proxyfc;
 	__le32	ip_addr;
 	u8	mac_addr[6];
+	u8	reserved[2];
 };
 
+I40E_CHECK_STRUCT_LEN(0x14, i40e_aqc_arp_proxy_data);
+
 /* Set NS Proxy Table Entry Command (indirect 0x0105) */
 struct i40e_aqc_ns_proxy_data {
 	__le16	table_idx_mac_addr_0;
@@ -490,6 +495,8 @@ struct i40e_aqc_ns_proxy_data {
 	u8	ipv6_addr_1[16];
 };
 
+I40E_CHECK_STRUCT_LEN(0x3c, i40e_aqc_ns_proxy_data);
+
 /* Manage LAA Command (0x0106) - obsolete */
 struct i40e_aqc_mng_laa {
 	__le16	command_flags;
@@ -500,6 +507,8 @@ struct i40e_aqc_mng_laa {
 	u8	reserved2[6];
 };
 
+I40E_CHECK_CMD_LENGTH(i40e_aqc_mng_laa);
+
 /* Manage MAC Address Read Command (indirect 0x0107) */
 struct i40e_aqc_mac_address_read {
 	__le16	command_flags;
@@ -571,6 +580,8 @@ struct i40e_aqc_get_switch_config_header_resp {
 	u8	reserved[12];
 };
 
+I40E_CHECK_CMD_LENGTH(i40e_aqc_get_switch_config_header_resp);
+
 struct i40e_aqc_switch_config_element_resp {
 	u8	element_type;
 #define I40E_AQ_SW_ELEM_TYPE_MAC	1
@@ -596,6 +607,8 @@ struct i40e_aqc_switch_config_element_resp {
 	__le16	element_info;
 };
 
+I40E_CHECK_STRUCT_LEN(0x10, i40e_aqc_switch_config_element_resp);
+
 /* Get Switch Configuration (indirect 0x0200)
  *    an array of elements are returned in the response buffer
  *    the first in the array is the header, remainder are elements
@@ -605,6 +618,8 @@ struct i40e_aqc_get_switch_config_resp {
 	struct i40e_aqc_switch_config_element_resp	element[1];
 };
 
+I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_get_switch_config_resp);
+
 /* Add Statistics (direct 0x0201)
  * Remove Statistics (direct 0x0202)
  */
@@ -670,6 +685,8 @@ struct i40e_aqc_switch_resource_alloc_element_resp {
 	u8	reserved2[6];
 };
 
+I40E_CHECK_STRUCT_LEN(0x10, i40e_aqc_switch_resource_alloc_element_resp);
+
 /* Add VSI (indirect 0x0210)
  *    this indirect command uses struct i40e_aqc_vsi_properties_data
  *    as the indirect buffer (128 bytes)
@@ -1101,6 +1118,8 @@ struct i40e_aqc_remove_tag {
 	u8	reserved[12];
 };
 
+I40E_CHECK_CMD_LENGTH(i40e_aqc_remove_tag);
+
 /* Add multicast E-Tag (direct 0x0257)
  * del multicast E-Tag (direct 0x0258) only uses pv_seid and etag fields
  * and no external data
@@ -1216,7 +1235,7 @@ struct i40e_aqc_add_remove_cloud_filters_element_data {
 	} ipaddr;
 	__le16	flags;
 #define I40E_AQC_ADD_CLOUD_FILTER_SHIFT			0
-#define I40E_AQC_ADD_CLOUD_FILTER_MASK			(0x3F << \
+#define I40E_AQC_ADD_CLOUD_FILTER_MASK	(0x3F << \
 					I40E_AQC_ADD_CLOUD_FILTER_SHIFT)
 /* 0x0000 reserved */
 #define I40E_AQC_ADD_CLOUD_FILTER_OIP			0x0001
@@ -1249,7 +1268,7 @@ struct i40e_aqc_add_remove_cloud_filters_element_data {
 	u8	reserved[4];
 	__le16	queue_number;
 #define I40E_AQC_ADD_CLOUD_QUEUE_SHIFT		0
-#define I40E_AQC_ADD_CLOUD_QUEUE_MASK		(0x3F << \
+#define I40E_AQC_ADD_CLOUD_QUEUE_MASK		(0x7FF << \
 						 I40E_AQC_ADD_CLOUD_QUEUE_SHIFT)
 	u8	reserved2[14];
 	/* response section */
@@ -1368,6 +1387,8 @@ struct i40e_aqc_configure_vsi_ets_sla_bw_data {
 	u8	reserved1[28];
 };
 
+I40E_CHECK_STRUCT_LEN(0x40, i40e_aqc_configure_vsi_ets_sla_bw_data);
+
 /* Configure VSI Bandwidth Allocation per Traffic Type (indirect 0x0407)
  *    responds with i40e_aqc_qs_handles_resp
  */
@@ -1379,6 +1400,8 @@ struct i40e_aqc_configure_vsi_tc_bw_data {
 	__le16	qs_handles[8];
 };
 
+I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_configure_vsi_tc_bw_data);
+
 /* Query vsi bw configuration (indirect 0x0408) */
 struct i40e_aqc_query_vsi_bw_config_resp {
 	u8	tc_valid_bits;
@@ -1392,6 +1415,8 @@ struct i40e_aqc_query_vsi_bw_config_resp {
 	u8	reserved3[23];
 };
 
+I40E_CHECK_STRUCT_LEN(0x40, i40e_aqc_query_vsi_bw_config_resp);
+
 /* Query VSI Bandwidth Allocation per Traffic Type (indirect 0x040A) */
 struct i40e_aqc_query_vsi_ets_sla_config_resp {
 	u8	tc_valid_bits;
@@ -1403,6 +1428,8 @@ struct i40e_aqc_query_vsi_ets_sla_config_resp {
 	__le16	tc_bw_max[2];
 };
 
+I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_query_vsi_ets_sla_config_resp);
+
 /* Configure Switching Component Bandwidth Limit (direct 0x0410) */
 struct i40e_aqc_configure_switching_comp_bw_limit {
 	__le16	seid;
@@ -1430,6 +1457,8 @@ struct i40e_aqc_configure_switching_comp_ets_data {
 	u8	reserved2[96];
 };
 
+I40E_CHECK_STRUCT_LEN(0x80, i40e_aqc_configure_switching_comp_ets_data);
+
 /* Configure Switching Component Bandwidth Limits per Tc (indirect 0x0416) */
 struct i40e_aqc_configure_switching_comp_ets_bw_limit_data {
 	u8	tc_valid_bits;
@@ -1441,6 +1470,8 @@ struct i40e_aqc_configure_switching_comp_ets_bw_limit_data {
 	u8	reserved1[28];
 };
 
+I40E_CHECK_STRUCT_LEN(0x40, i40e_aqc_configure_switching_comp_ets_bw_limit_data);
+
 /* Configure Switching Component Bandwidth Allocation per Tc
  * (indirect 0x0417)
  */
@@ -1452,6 +1483,8 @@ struct i40e_aqc_configure_switching_comp_bw_config_data {
 	u8	reserved1[20];
 };
 
+I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_configure_switching_comp_bw_config_data);
+
 /* Query Switching Component Configuration (indirect 0x0418) */
 struct i40e_aqc_query_switching_comp_ets_config_resp {
 	u8	tc_valid_bits;
@@ -1462,6 +1495,8 @@ struct i40e_aqc_query_switching_comp_ets_config_resp {
 	u8	reserved2[23];
 };
 
+I40E_CHECK_STRUCT_LEN(0x40, i40e_aqc_query_switching_comp_ets_config_resp);
+
 /* Query PhysicalPort ETS Configuration (indirect 0x0419) */
 struct i40e_aqc_query_port_ets_config_resp {
 	u8	reserved[4];
@@ -1477,6 +1512,8 @@ struct i40e_aqc_query_port_ets_config_resp {
 	u8	reserved3[32];
 };
 
+I40E_CHECK_STRUCT_LEN(0x44, i40e_aqc_query_port_ets_config_resp);
+
 /* Query Switching Component Bandwidth Allocation per Traffic Type
  * (indirect 0x041A)
  */
@@ -1491,6 +1528,8 @@ struct i40e_aqc_query_switching_comp_bw_config_resp {
 	__le16	tc_bw_max[2];
 };
 
+I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_query_switching_comp_bw_config_resp);
+
 /* Suspend/resume port TX traffic
  * (direct 0x041B and 0x041C) uses the generic SEID struct
  */
@@ -1504,6 +1543,8 @@ struct i40e_aqc_configure_partition_bw_data {
 	u8	max_bw[16];      /* bandwidth limit */
 };
 
+I40E_CHECK_STRUCT_LEN(0x22, i40e_aqc_configure_partition_bw_data);
+
 /* Get and set the active HMC resource profile and status.
  * (direct 0x0500) and (direct 0x0501)
  */
@@ -1586,6 +1627,8 @@ struct i40e_aqc_module_desc {
 	u8 reserved2[8];
 };
 
+I40E_CHECK_STRUCT_LEN(0x20, i40e_aqc_module_desc);
+
 struct i40e_aq_get_phy_abilities_resp {
 	__le32	phy_type;       /* bitmap using the above enum for offsets */
 	u8	link_speed;     /* bitmap using the above enum bit patterns */
@@ -1614,6 +1657,8 @@ struct i40e_aq_get_phy_abilities_resp {
 	struct i40e_aqc_module_desc	qualified_module[I40E_AQ_PHY_MAX_QMS];
 };
 
+I40E_CHECK_STRUCT_LEN(0x218, i40e_aq_get_phy_abilities_resp);
+
 /* Set PHY Config (direct 0x0601) */
 struct i40e_aq_set_phy_config { /* same bits as above in all */
 	__le32	phy_type;
@@ -1801,7 +1846,7 @@ struct i40e_aqc_nvm_config_read {
 #define I40E_AQ_ANVM_READ_SINGLE_FEATURE		0
 #define I40E_AQ_ANVM_READ_MULTIPLE_FEATURES		1
 	__le16	element_count;
-	__le16	element_id; /* Feature/field ID */
+	__le16	element_id;     /* Feature/field ID */
 	__le16	element_id_msw;	/* MSWord of field ID */
 	__le32	address_high;
 	__le32	address_low;
@@ -1834,14 +1879,17 @@ struct i40e_aqc_nvm_config_data_feature {
 	__le16 feature_selection;
 };
 
+I40E_CHECK_STRUCT_LEN(0x6, i40e_aqc_nvm_config_data_feature);
+
 struct i40e_aqc_nvm_config_data_immediate_field {
-#define ANVM_FEATURE_OR_IMMEDIATE_MASK	0x2
-	__le16 field_id;
-	__le16 instance_id;
+	__le32 field_id;
+	__le32 field_value;
 	__le16 field_options;
-	__le16 field_value;
+	__le16 reserved;
 };
 
+I40E_CHECK_STRUCT_LEN(0xc, i40e_aqc_nvm_config_data_immediate_field);
+
 /* Send to PF command (indirect 0x0801) id is only used by PF
  * Send to VF command (indirect 0x0802) id is only used by PF
  * Send to Peer PF command (indirect 0x0803)
@@ -2150,7 +2198,8 @@ struct i40e_aqc_oem_param_change {
 #define I40E_AQ_OEM_PARAM_TYPE_BW_CTL	1
 #define I40E_AQ_OEM_PARAM_MAC		2
 	__le32	param_value1;
-	u8	param_value2[8];
+	__le16	param_value2;
+	u8	reserved[6];
 };
 
 I40E_CHECK_CMD_LENGTH(i40e_aqc_oem_param_change);
@@ -2164,6 +2213,28 @@ struct i40e_aqc_oem_state_change {
 
 I40E_CHECK_CMD_LENGTH(i40e_aqc_oem_state_change);
 
+/* Initialize OCSD (0xFE02, direct) */
+struct i40e_aqc_opc_oem_ocsd_initialize {
+	u8 type_status;
+	u8 reserved1[3];
+	__le32 ocsd_memory_block_addr_high;
+	__le32 ocsd_memory_block_addr_low;
+	__le32 requested_update_interval;
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_opc_oem_ocsd_initialize);
+
+/* Initialize OCBB  (0xFE03, direct) */
+struct i40e_aqc_opc_oem_ocbb_initialize {
+	u8 type_status;
+	u8 reserved1[3];
+	__le32 ocbb_memory_block_addr_high;
+	__le32 ocbb_memory_block_addr_low;
+	u8 reserved2[4];
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_opc_oem_ocbb_initialize);
+
 /* debug commands */
 
 /* get device id (0xFF00) uses the generic structure */
-- 
1.8.1.4

  parent reply	other threads:[~2015-04-30 15:05 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-20  8:22 [dpdk-dev] [PATCH 00/18] i40e base driver update Helin Zhang
2015-04-20  8:22 ` [dpdk-dev] [PATCH 01/18] i40e: copyright update Helin Zhang
2015-04-20  8:22 ` [dpdk-dev] [PATCH 02/18] i40e: disable setting phy configuration Helin Zhang
2015-04-20  8:22 ` [dpdk-dev] [PATCH 03/18] i40e: adjustment of register definitions and relevant Helin Zhang
2015-04-27 17:16   ` Thomas Monjalon
2015-04-28  2:29     ` Zhang, Helin
2015-04-20  8:22 ` [dpdk-dev] [PATCH 04/18] i40e: support of CEE DCBX on recent firmware versions Helin Zhang
2015-04-20  8:22 ` [dpdk-dev] [PATCH 05/18] i40e: rework of 'i40e_hmc_get_object_va' Helin Zhang
2015-04-20  8:22 ` [dpdk-dev] [PATCH 06/18] i40e: support of Fortpark device IDs and mac types Helin Zhang
2015-04-20  8:22 ` [dpdk-dev] [PATCH 07/18] i40e: rename 'err' to 'perrno' Helin Zhang
2015-04-20  8:22 ` [dpdk-dev] [PATCH 08/18] i40e: support NVM read on Fortpark, with minor enhancements Helin Zhang
2015-04-20  8:22 ` [dpdk-dev] [PATCH 09/18] i40e: adminq enhancements Helin Zhang
2015-04-20  8:22 ` [dpdk-dev] [PATCH 10/18] i40e: support of firmware build number Helin Zhang
2015-04-20  8:22 ` [dpdk-dev] [PATCH 11/18] i40e: support of building both PF and VF driver together Helin Zhang
2015-04-27 17:25   ` Thomas Monjalon
2015-04-28  2:33     ` Zhang, Helin
2015-04-20  8:22 ` [dpdk-dev] [PATCH 12/18] i40e: enhancements of AQ commands and common interfaces Helin Zhang
2015-04-27 17:26   ` Thomas Monjalon
2015-04-28  2:34     ` Zhang, Helin
2015-04-20  8:22 ` [dpdk-dev] [PATCH 13/18] i40e: replacement of 'i40e_debug_read_register()' Helin Zhang
2015-04-27 17:28   ` Thomas Monjalon
2015-04-28  2:34     ` Zhang, Helin
2015-04-20  8:22 ` [dpdk-dev] [PATCH 14/18] i40e: add new interfaces of AQ commands and relevant Helin Zhang
2015-04-20  8:22 ` [dpdk-dev] [PATCH 15/18] i40e: support of Fortpark FPGA Helin Zhang
2015-04-20  8:22 ` [dpdk-dev] [PATCH 16/18] i40e: add more virtual channel operations Helin Zhang
2015-04-20  8:22 ` [dpdk-dev] [PATCH 17/18] i40e: support of structure and command length check Helin Zhang
2015-04-20  8:22 ` [dpdk-dev] [PATCH 18/18] i40e: Minor enhancements in i40e_type.h Helin Zhang
2015-04-22  7:26 ` [dpdk-dev] [PATCH 00/18] i40e base driver update Cao, Min
2015-04-30 15:03 ` [dpdk-dev] [PATCH v2 00/33] " Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 01/33] i40e: copyright update Helin Zhang
2015-05-08  3:22     ` Wu, Jingjing
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 02/33] i40e: disable setting of phy configuration Helin Zhang
2015-05-08  3:22     ` Wu, Jingjing
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 03/33] i40e: adjustment of register definitions and relevant Helin Zhang
2015-05-08  3:21     ` Wu, Jingjing
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 04/33] i40e/base: rename 'err' to 'perrno' Helin Zhang
2015-05-08  3:20     ` Wu, Jingjing
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 05/33] i40e/base: support of building both PF and VF driver together Helin Zhang
2015-05-08  3:25     ` Wu, Jingjing
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 06/33] i40e/base: support of CEE DCBX on recent firmware versions Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 07/33] i40e: replacement of 'i40e_debug_read_register()' Helin Zhang
2015-05-08  3:23     ` Wu, Jingjing
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 08/33] i40e/base: rework of 'i40e_hmc_get_object_va' Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 09/33] i40e/base: update of shadow RAM read/write functions Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 10/33] i40e/base: catch NVM write semaphore timeout and retry Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 11/33] i40e/base: check for AQ timeout in aq_rc decode Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 12/33] i40e/base: fix up NVM update sm error handling Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 13/33] i40e/base: enhancement of polling NVM semaphore Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 14/33] i40e/base: enhancements of NVM checksum calculation Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 15/33] i40e/base: replacement of DEBUGOUT() with i40e_debug() Helin Zhang
2015-05-08  3:24     ` Wu, Jingjing
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 16/33] i40e/base: add fw build info to AQ data Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 17/33] i40e/base: define and use i40e_is_vf() Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 18/33] i40e/base: grab NVM devstarter version not image version Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 19/33] i40e/base: enhancements on adminq init and sending asq command Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 20/33] i40e/base: i40e_aq_get_link_info() should be used directly Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 21/33] i40e/base: add new interfaces for future use Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 22/33] i40e/base: update of get/set LED functions Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 23/33] i40e/base: clean up sparse complaint in i40e_debug_aq Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 24/33] i40e/base: get pf_id from HW rather than PCI function Helin Zhang
2015-05-08  3:20     ` Wu, Jingjing
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 25/33] i40e/base: find partition_id in npar mode, and disable FCOE by default Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 26/33] i40e/base: Reassign incorrect PHY type as a workaround for a FW issue Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 27/33] i40e/base: add AOC phy types to case statement in get_media_type Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 28/33] i40e/base: support for iSCSI capability Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 29/33] i40e/base: set FLAG_RD when sending driver version to FW Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 30/33] i40e/base: future proof some sizeof calls Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 31/33] i40e/base: add more virtual channel operations for future use Helin Zhang
2015-04-30 15:03   ` [dpdk-dev] [PATCH v2 32/33] i40e/base: rework of structures and macros " Helin Zhang
2015-04-30 15:03   ` Helin Zhang [this message]
2015-05-07  1:17   ` [dpdk-dev] [PATCH v2 00/33] i40e base driver update Cao, Min
2015-05-08  5:54   ` Liu, Jijiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430406219-23901-34-git-send-email-helin.zhang@intel.com \
    --to=helin.zhang@intel.com \
    --cc=dev@dpdk.org \
    --cc=monica.kenguva@intel.com \
    --cc=shannon.nelson@intel.com \
    --cc=steven.j.murray@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).