From: Jingjing Wu <jingjing.wu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 6/6] doc: extend commands in testpmd
Date: Mon, 11 May 2015 11:46:30 +0800 [thread overview]
Message-ID: <1431315990-3067-7-git-send-email-jingjing.wu@intel.com> (raw)
In-Reply-To: <1431315990-3067-1-git-send-email-jingjing.wu@intel.com>
Modify the doc about flow director commands to support l2_payload
flow type and filtering in VFs.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
---
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 761172e..3d56097 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1527,27 +1527,28 @@ Different NICs may have different capabilities, command show port fdir (port_id)
flow_director_filter (port_id) (add|del|update) flow (ipv4-other|ipv4-frag|ipv6-other|ipv6-frag)
src (src_ip_address) dst (dst_ip_address) vlan (vlan_value) flexbytes (flexbytes_value)
-(drop|fwd) queue (queue_id) fd_id (fd_id_value)
+(drop|fwd) pf|vf(vf_id) queue (queue_id) fd_id (fd_id_value)
flow_director_filter (port_id) (add|del|update) flow (ipv4-tcp|ipv4-udp|ipv6-tcp|ipv6-udp)
src (src_ip_address) (src_port) dst (dst_ip_address) (dst_port) vlan (vlan_value)
-flexbytes (flexbytes_value) (drop|fwd) queue (queue_id) fd_id (fd_id_value)
+flexbytes (flexbytes_value) (drop|fwd) pf|vf(vf_id) queue (queue_id) fd_id (fd_id_value)
flow_director_filter (port_id) (add|del|update) flow (ipv4-sctp|ipv6-sctp)
src (src_ip_address) (src_port) dst (dst_ip_address) (dst_port) tag (verification_tag)
-vlan (vlan_value) flexbytes (flexbytes_value) (drop|fwd) queue (queue_id) fd_id (fd_id_value)
+vlan (vlan_value) flexbytes (flexbytes_value) (drop|fwd) pf|vf(vf_id) queue (queue_id) fd_id (fd_id_value)
-For example, to add an ipv4-udp flow type filter:
+flow_director_filter (port_id) (add|del|update) flow l2_payload
+ether (ethertype) flexbytes (flexbytes_value) (drop|fwd) pf|vf(vf_id) queue (queue_id) fd_id (fd_id_value)
.. code-block:: console
- testpmd> flow_director_filter 0 add flow ipv4-udp src 2.2.2.3 32 dst 2.2.2.5 33 vlan 0x1 flexbytes (0x88,0x48) fwd queue 1 fd_id 1
+ testpmd> flow_director_filter 0 add flow ipv4-udp src 2.2.2.3 32 dst 2.2.2.5 33 vlan 0x1 flexbytes (0x88,0x48) fwd pf queue 1 fd_id 1
For example, add an ipv4-other flow type filter:
.. code-block:: console
- testpmd> flow_director_filter 0 add flow ipv4-other src 2.2.2.3 dst 2.2.2.5 vlan 0x1 flexbytes (0x88,0x48) fwd queue 1 fd_id 1
+ testpmd> flow_director_filter 0 add flow ipv4-other src 2.2.2.3 dst 2.2.2.5 vlan 0x1 flexbytes (0x88,0x48) fwd pf queue 1 fd_id 1
flush_flow_director
~~~~~~~~~~~~~~~~~~~
@@ -1582,7 +1583,7 @@ flow_director_flex_mask
set masks of flow director's flexible payload based on certain flow type:
flow_director_flex_mask (port_id) flow (none|ipv4-other|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|
-ipv6-other|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|all) (mask)
+ipv6-other|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|l2_payload|all) (mask)
Example, to set flow director's flex mask for all flow type on port 0:
--
1.9.3
next prev parent reply other threads:[~2015-05-11 3:47 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-11 3:46 [dpdk-dev] [PATCH 0/6] extend flow director to support L2_paylod type and VF filtering in i40e driver Jingjing Wu
2015-05-11 3:46 ` [dpdk-dev] [PATCH 1/6] ethdev: add struct rte_eth_l2_flow to support l2_payload flow type Jingjing Wu
2015-05-11 3:46 ` [dpdk-dev] [PATCH 2/6] i40e: extend flow diretcor " Jingjing Wu
2015-05-11 3:46 ` [dpdk-dev] [PATCH 3/6] ethdev: extend struct to support flow director in VFs Jingjing Wu
2015-06-12 16:45 ` Thomas Monjalon
2015-06-15 7:14 ` Wu, Jingjing
2015-05-11 3:46 ` [dpdk-dev] [PATCH 4/6] i40e: extend flow diretcor to support filtering " Jingjing Wu
2015-05-11 3:46 ` [dpdk-dev] [PATCH 5/6] testpmd: extend commands Jingjing Wu
2015-05-11 3:46 ` Jingjing Wu [this message]
2015-06-02 7:33 ` [dpdk-dev] [PATCH 0/6] extend flow director to support L2_paylod type and VF filtering in i40e driver Zhang, Helin
2015-06-16 3:43 ` [dpdk-dev] [PATCH v2 0/4] extend flow director to support L2_paylod type Jingjing Wu
2015-06-16 3:43 ` [dpdk-dev] [PATCH v2 1/4] ethdev: add struct rte_eth_l2_flow to support l2_payload flow type Jingjing Wu
2015-06-16 3:43 ` [dpdk-dev] [PATCH v2 2/4] i40e: extend flow diretcor " Jingjing Wu
2015-06-16 3:43 ` [dpdk-dev] [PATCH v2 3/4] testpmd: extend commands Jingjing Wu
2015-06-16 3:43 ` [dpdk-dev] [PATCH v2 4/4] doc: extend commands in testpmd Jingjing Wu
2015-06-26 2:26 ` [dpdk-dev] [PATCH v2 0/4] extend flow director to support L2_paylod type Xu, HuilongX
2015-06-26 3:14 ` Zhang, Helin
2015-07-07 21:24 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431315990-3067-7-git-send-email-jingjing.wu@intel.com \
--to=jingjing.wu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).