From: Jijiang Liu <jijiang.liu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v4 6/8] examples/vhost:support TX offload in vhost sample
Date: Wed, 11 Nov 2015 14:40:44 +0800 [thread overview]
Message-ID: <1447224046-1169-7-git-send-email-jijiang.liu@intel.com> (raw)
In-Reply-To: <1447224046-1169-1-git-send-email-jijiang.liu@intel.com>
Change the vhost sample to support and test TX offload.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
---
examples/vhost/main.c | 110 +++++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 107 insertions(+), 3 deletions(-)
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index 044c680..24e2c26 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -51,6 +51,9 @@
#include <rte_malloc.h>
#include <rte_virtio_net.h>
#include <rte_ip.h>
+#include <rte_tcp.h>
+#include <rte_udp.h>
+#include <rte_sctp.h>
#include "main.h"
@@ -198,6 +201,13 @@ typedef enum {
static uint32_t enable_stats = 0;
/* Enable retries on RX. */
static uint32_t enable_retry = 1;
+
+/* Disable TX checksum offload */
+static uint32_t enable_tx_csum;
+
+/* Disable TSO offload */
+static uint32_t enable_tso;
+
/* Specify timeout (in useconds) between retries on RX. */
static uint32_t burst_rx_delay_time = BURST_RX_WAIT_US;
/* Specify the number of retries on RX. */
@@ -428,6 +438,14 @@ port_init(uint8_t port)
if (port >= rte_eth_dev_count()) return -1;
+ if (enable_tx_csum == 0)
+ rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_CSUM);
+
+ if (enable_tso == 0) {
+ rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_HOST_TSO4);
+ rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_HOST_TSO6);
+ }
+
rx_rings = (uint16_t)dev_info.max_rx_queues;
/* Configure ethernet device. */
retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
@@ -563,7 +581,9 @@ us_vhost_usage(const char *prgname)
" --rx-desc-num [0-N]: the number of descriptors on rx, "
"used only when zero copy is enabled.\n"
" --tx-desc-num [0-N]: the number of descriptors on tx, "
- "used only when zero copy is enabled.\n",
+ "used only when zero copy is enabled.\n"
+ " --tx-csum [0|1] disable/enable TX checksum offload.\n"
+ " --tso [0|1] disable/enable TCP segement offload.\n",
prgname);
}
@@ -589,6 +609,8 @@ us_vhost_parse_args(int argc, char **argv)
{"zero-copy", required_argument, NULL, 0},
{"rx-desc-num", required_argument, NULL, 0},
{"tx-desc-num", required_argument, NULL, 0},
+ {"tx-csum", required_argument, NULL, 0},
+ {"tso", required_argument, NULL, 0},
{NULL, 0, 0, 0},
};
@@ -643,6 +665,28 @@ us_vhost_parse_args(int argc, char **argv)
}
}
+ /* Enable/disable TX checksum offload. */
+ if (!strncmp(long_option[option_index].name, "tx-csum", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, 1);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for tx-csum [0|1]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else
+ enable_tx_csum = ret;
+ }
+
+ /* Enable/disable TSO offload. */
+ if (!strncmp(long_option[option_index].name, "tso", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, 1);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for tso [0|1]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else
+ enable_tso = ret;
+ }
+
/* Specify the retries delay time (in useconds) on RX. */
if (!strncmp(long_option[option_index].name, "rx-retry-delay", MAX_LONG_OPT_SZ)) {
ret = parse_num_opt(optarg, INT32_MAX);
@@ -1101,6 +1145,63 @@ find_local_dest(struct virtio_net *dev, struct rte_mbuf *m,
return 0;
}
+static uint16_t
+get_psd_sum(void *l3_hdr, uint64_t ol_flags)
+{
+ if (ol_flags & PKT_TX_IPV4)
+ return rte_ipv4_phdr_cksum(l3_hdr, ol_flags);
+ else /* assume ethertype == ETHER_TYPE_IPv6 */
+ return rte_ipv6_phdr_cksum(l3_hdr, ol_flags);
+}
+
+static void virtio_tx_offload(struct rte_mbuf *m)
+{
+ void *l3_hdr;
+ struct ipv4_hdr *ipv4_hdr = NULL;
+ struct tcp_hdr *tcp_hdr = NULL;
+ struct udp_hdr *udp_hdr = NULL;
+ struct sctp_hdr *sctp_hdr = NULL;
+ struct ether_hdr *eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+
+ l3_hdr = (char *)eth_hdr + m->l2_len;
+
+ if (m->ol_flags & PKT_TX_IPV4) {
+ ipv4_hdr = (struct ipv4_hdr *)l3_hdr;
+ if (m->ol_flags & PKT_TX_IP_CKSUM)
+ ipv4_hdr->hdr_checksum = 0;
+ }
+
+ if (m->ol_flags & PKT_TX_L4_MASK) {
+ switch (m->ol_flags & PKT_TX_L4_MASK) {
+ case PKT_TX_TCP_CKSUM:
+ tcp_hdr = (struct tcp_hdr *)
+ ((char *)l3_hdr + m->l3_len);
+ tcp_hdr->cksum = get_psd_sum(l3_hdr, m->ol_flags);
+ break;
+ case PKT_TX_UDP_CKSUM:
+ udp_hdr = (struct udp_hdr *)
+ ((char *)l3_hdr + m->l3_len);
+ udp_hdr->dgram_cksum = get_psd_sum(l3_hdr, m->ol_flags);
+ break;
+ case PKT_TX_SCTP_CKSUM:
+ sctp_hdr = (struct sctp_hdr *)
+ ((char *)l3_hdr + m->l3_len);
+ sctp_hdr->cksum = 0;
+ break;
+ default:
+ break;
+ }
+ }
+
+ if (m->tso_segsz != 0) {
+ ipv4_hdr = (struct ipv4_hdr *)l3_hdr;
+ tcp_hdr = (struct tcp_hdr *)((char *)l3_hdr + m->l3_len);
+ m->ol_flags |= PKT_TX_IP_CKSUM;
+ ipv4_hdr->hdr_checksum = 0;
+ tcp_hdr->cksum = get_psd_sum(l3_hdr, m->ol_flags);
+ }
+}
+
/*
* This function routes the TX packet to the correct interface. This may be a local device
* or the physical port.
@@ -1143,7 +1244,7 @@ virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m, uint16_t vlan_tag)
(vh->vlan_tci != vlan_tag_be))
vh->vlan_tci = vlan_tag_be;
} else {
- m->ol_flags = PKT_TX_VLAN_PKT;
+ m->ol_flags |= PKT_TX_VLAN_PKT;
/*
* Find the right seg to adjust the data len when offset is
@@ -1167,6 +1268,9 @@ virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m, uint16_t vlan_tag)
m->vlan_tci = vlan_tag;
}
+ if ((m->ol_flags & PKT_TX_L4_MASK) || (m->ol_flags & PKT_TX_TCP_SEG))
+ virtio_tx_offload(m);
+
tx_q->m_table[len] = m;
len++;
if (enable_stats) {
@@ -1828,7 +1932,7 @@ virtio_tx_route_zcp(struct virtio_net *dev, struct rte_mbuf *m,
mbuf->buf_physaddr = m->buf_physaddr;
mbuf->buf_addr = m->buf_addr;
}
- mbuf->ol_flags = PKT_TX_VLAN_PKT;
+ mbuf->ol_flags |= PKT_TX_VLAN_PKT;
mbuf->vlan_tci = vlan_tag;
mbuf->l2_len = sizeof(struct ether_hdr);
mbuf->l3_len = sizeof(struct ipv4_hdr);
--
1.7.7.6
next prev parent reply other threads:[~2015-11-11 6:41 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-11 6:40 [dpdk-dev] [PATCH v4 0/8] add virtio offload support in us-vhost Jijiang Liu
2015-11-11 6:40 ` [dpdk-dev] [PATCH v4 1/8] driver/virtio:add virtual address for virtio net header Jijiang Liu
2015-11-11 6:40 ` [dpdk-dev] [PATCH v4 2/8] driver/virtio:record virtual address of " Jijiang Liu
2015-11-11 6:40 ` [dpdk-dev] [PATCH v4 3/8] virtio/lib:add vhost TX checksum support capabilities Jijiang Liu
2015-11-11 8:26 ` Yuanhan Liu
2015-11-11 17:31 ` Stephen Hemminger
2015-11-12 1:41 ` Yuanhan Liu
2015-11-11 6:40 ` [dpdk-dev] [PATCH v4 4/8] virtio/lib:dequeue vhost TX offload Jijiang Liu
2015-11-11 6:40 ` [dpdk-dev] [PATCH v4 5/8] sample/vhost:remove ip_hdr structure defination Jijiang Liu
2015-11-11 8:34 ` Yuanhan Liu
2015-11-11 10:05 ` Thomas Monjalon
2015-11-11 6:40 ` Jijiang Liu [this message]
2015-11-11 6:40 ` [dpdk-dev] [PATCH v4 7/8] virtio/lib:add virtio guest offload capabilities Jijiang Liu
2015-11-11 8:31 ` Yuanhan Liu
2015-11-11 8:38 ` Liu, Jijiang
2015-11-11 8:44 ` Yuanhan Liu
2015-11-11 8:53 ` Liu, Jijiang
2015-11-11 8:57 ` Xu, Qian Q
2015-11-11 11:10 ` Liu, Jijiang
2015-11-11 10:08 ` Thomas Monjalon
2015-11-11 12:53 ` Yuanhan Liu
2015-11-11 6:40 ` [dpdk-dev] [PATCH v4 8/8] virtio/lib:add guest offload handle Jijiang Liu
2015-11-11 8:23 ` Yuanhan Liu
2015-11-11 10:19 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447224046-1169-7-git-send-email-jijiang.liu@intel.com \
--to=jijiang.liu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).