DPDK patches and discussions
 help / color / mirror / Atom feed
From: Keith Wiles <keith.wiles@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH] config: remove duplicate configuration information
Date: Mon, 22 Feb 2016 07:53:37 -0600	[thread overview]
Message-ID: <1456149217-24833-1-git-send-email-keith.wiles@intel.com> (raw)

In order to cleanup the configuration files some and reduce
the number of duplicate configuration information. Add a new
file called common_base which contains just about all of the
configuration lines in one place. Then have the common_bsdapp,
common_linuxapp files include this one file. Then in those OS
specific files add the delta configuration lines.

Signed-off-by: Keith Wiles <keith.wiles@intel.com>
---
 config/common_base                          | 498 ++++++++++++++++++++++++++++
 config/common_bsdapp                        | 436 +-----------------------
 config/common_linuxapp                      | 491 +--------------------------
 config/defconfig_x86_64-native-bsdapp-clang |   1 +
 config/defconfig_x86_64-native-bsdapp-gcc   |   1 +
 5 files changed, 518 insertions(+), 909 deletions(-)
 create mode 100644 config/common_base

diff --git a/config/common_base b/config/common_base
new file mode 100644
index 0000000..91a12eb
--- /dev/null
+++ b/config/common_base
@@ -0,0 +1,498 @@
+#   BSD LICENSE
+#
+#   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+#   All rights reserved.
+#
+#   Redistribution and use in source and binary forms, with or without
+#   modification, are permitted provided that the following conditions
+#   are met:
+#
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in
+#       the documentation and/or other materials provided with the
+#       distribution.
+#     * Neither the name of Intel Corporation nor the names of its
+#       contributors may be used to endorse or promote products derived
+#       from this software without specific prior written permission.
+#
+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+#
+# Use intrinsics or assembly code for key routines
+#
+CONFIG_RTE_FORCE_INTRINSICS=n
+
+#
+# Machine forces strict alignment constraints.
+#
+CONFIG_RTE_ARCH_STRICT_ALIGN=n
+
+#
+# Compile to share library
+#
+CONFIG_RTE_BUILD_SHARED_LIB=n
+
+#
+# Combine to one single library
+#
+CONFIG_RTE_BUILD_COMBINE_LIBS=n
+
+#
+# Use newest code breaking previous ABI
+#
+CONFIG_RTE_NEXT_ABI=y
+
+#
+# Machine's cache line size
+#
+CONFIG_RTE_CACHE_LINE_SIZE=64
+
+#
+# Compile Environment Abstraction Layer
+#
+CONFIG_RTE_LIBRTE_EAL=y
+CONFIG_RTE_MAX_LCORE=128
+CONFIG_RTE_MAX_NUMA_NODES=8
+CONFIG_RTE_MAX_MEMSEG=256
+CONFIG_RTE_MAX_MEMZONE=2560
+CONFIG_RTE_MAX_TAILQ=32
+CONFIG_RTE_LOG_LEVEL=8
+CONFIG_RTE_LOG_HISTORY=256
+CONFIG_RTE_LIBEAL_USE_HPET=n
+CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
+CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
+CONFIG_RTE_EAL_IGB_UIO=y
+CONFIG_RTE_EAL_VFIO=y
+CONFIG_RTE_MALLOC_DEBUG=n
+
+# Default driver path (or "" to disable)
+CONFIG_RTE_EAL_PMD_PATH=""
+
+#
+# Special configurations in PCI Config Space for high performance
+#
+CONFIG_RTE_PCI_CONFIG=n
+CONFIG_RTE_PCI_EXTENDED_TAG=""
+CONFIG_RTE_PCI_MAX_READ_REQUEST_SIZE=0
+
+#
+# Compile Environment Abstraction Layer to support Vmware TSC map
+#
+CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
+
+#
+# Compile the argument parser library
+#
+CONFIG_RTE_LIBRTE_KVARGS=y
+
+#
+# Compile generic ethernet library
+#
+CONFIG_RTE_LIBRTE_ETHER=y
+CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
+CONFIG_RTE_MAX_ETHPORTS=32
+CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
+CONFIG_RTE_LIBRTE_IEEE1588=n
+CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
+CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
+
+#
+# Support NIC bypass logic
+#
+CONFIG_RTE_NIC_BYPASS=n
+
+#
+# Compile burst-oriented IGB & EM PMD drivers
+#
+CONFIG_RTE_LIBRTE_EM_PMD=y
+CONFIG_RTE_LIBRTE_IGB_PMD=y
+CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
+
+#
+# Compile burst-oriented IXGBE PMD driver
+#
+CONFIG_RTE_LIBRTE_IXGBE_PMD=y
+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
+CONFIG_RTE_IXGBE_INC_VECTOR=y
+CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y
+
+#
+# Compile burst-oriented I40E PMD driver
+#
+CONFIG_RTE_LIBRTE_I40E_PMD=y
+CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
+CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
+CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y
+CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
+CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
+CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
+CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
+# interval up to 8160 us, aligned to 2 (or default value)
+CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
+
+#
+# Compile burst-oriented FM10K PMD
+#
+CONFIG_RTE_LIBRTE_FM10K_PMD=y
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
+CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
+
+#
+# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
+#
+CONFIG_RTE_LIBRTE_MLX4_PMD=n
+CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
+CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
+CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
+CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
+CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
+
+#
+# Compile burst-oriented Mellanox ConnectX-4 (MLX5) PMD
+#
+CONFIG_RTE_LIBRTE_MLX5_PMD=n
+CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
+CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N=4
+CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE=0
+CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
+
+#
+# Compile burst-oriented Broadcom PMD driver
+#
+CONFIG_RTE_LIBRTE_BNX2X_PMD=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
+
+#
+# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
+#
+CONFIG_RTE_LIBRTE_CXGBE_PMD=y
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
+
+#
+# Compile burst-oriented Cisco ENIC PMD driver
+#
+CONFIG_RTE_LIBRTE_ENIC_PMD=y
+CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
+
+#
+# Compile burst-oriented Netronome NFP PMD driver
+#
+CONFIG_RTE_LIBRTE_NFP_PMD=n
+CONFIG_RTE_LIBRTE_NFP_DEBUG=n
+
+#
+# Compile software PMD backed by SZEDATA2 device
+#
+CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
+
+#
+# Compile burst-oriented VIRTIO PMD driver
+#
+CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
+
+#
+# Compile burst-oriented VMXNET3 PMD driver
+#
+CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
+
+#
+# Compile example software rings based PMD
+#
+CONFIG_RTE_LIBRTE_PMD_RING=y
+CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
+CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
+
+#
+# Compile software PMD backed by PCAP files
+#
+CONFIG_RTE_LIBRTE_PMD_PCAP=n
+
+#
+# Compile link bonding PMD library
+#
+CONFIG_RTE_LIBRTE_PMD_BOND=y
+CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
+CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
+
+#
+# Compile software PMD backed by AF_PACKET sockets (Linux only)
+#
+CONFIG_RTE_LIBRTE_PMD_AF_PACKET=y
+
+#
+# Compile Xen PMD
+#
+CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
+
+#
+# Compile null PMD
+#
+CONFIG_RTE_LIBRTE_PMD_NULL=y
+
+#
+# Do prefetch of packet data within PMD driver receive function
+#
+CONFIG_RTE_PMD_PACKET_PREFETCH=y
+
+#
+# Compile generic crypto device library
+# EXPERIMENTAL: API may change without prior notice
+#
+CONFIG_RTE_LIBRTE_CRYPTODEV=y
+CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
+CONFIG_RTE_CRYPTO_MAX_DEVS=64
+CONFIG_RTE_CRYPTODEV_NAME_LEN=64
+
+#
+# Compile PMD for QuickAssist based devices
+#
+CONFIG_RTE_LIBRTE_PMD_QAT=n
+CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
+#
+# Number of sessions to create in the session memory pool
+# on a single QuickAssist device.
+#
+CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
+
+#
+# Compile PMD for AESNI backed device
+#
+CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
+CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
+CONFIG_RTE_AESNI_MB_PMD_MAX_NB_QUEUE_PAIRS=8
+CONFIG_RTE_AESNI_MB_PMD_MAX_NB_SESSIONS=2048
+
+#
+# Compile librte_ring
+#
+CONFIG_RTE_LIBRTE_RING=y
+CONFIG_RTE_LIBRTE_RING_DEBUG=n
+CONFIG_RTE_RING_SPLIT_PROD_CONS=n
+CONFIG_RTE_RING_PAUSE_REP_COUNT=0
+
+#
+# Compile librte_mempool
+#
+CONFIG_RTE_LIBRTE_MEMPOOL=y
+CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
+CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
+
+#
+# Compile librte_mbuf
+#
+CONFIG_RTE_LIBRTE_MBUF=y
+CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
+CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
+CONFIG_RTE_PKTMBUF_HEADROOM=128
+
+#
+# Compile librte_mbuf_offload
+# EXPERIMENTAL: API may change without prior notice
+#
+CONFIG_RTE_LIBRTE_MBUF_OFFLOAD=y
+CONFIG_RTE_LIBRTE_MBUF_OFFLOAD_DEBUG=n
+
+#
+# Compile librte_timer
+#
+CONFIG_RTE_LIBRTE_TIMER=y
+CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
+
+#
+# Compile librte_cfgfile
+#
+CONFIG_RTE_LIBRTE_CFGFILE=y
+
+#
+# Compile librte_cmdline
+#
+CONFIG_RTE_LIBRTE_CMDLINE=y
+CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
+
+#
+# Compile librte_hash
+#
+CONFIG_RTE_LIBRTE_HASH=y
+CONFIG_RTE_LIBRTE_HASH_DEBUG=n
+
+#
+# Compile librte_jobstats
+#
+CONFIG_RTE_LIBRTE_JOBSTATS=y
+
+#
+# Compile librte_lpm
+#
+CONFIG_RTE_LIBRTE_LPM=y
+CONFIG_RTE_LIBRTE_LPM_DEBUG=n
+
+#
+# Compile librte_acl
+#
+CONFIG_RTE_LIBRTE_ACL=y
+CONFIG_RTE_LIBRTE_ACL_DEBUG=n
+
+#
+# Compile librte_power
+#
+CONFIG_RTE_LIBRTE_POWER=y
+CONFIG_RTE_LIBRTE_POWER_DEBUG=n
+CONFIG_RTE_MAX_LCORE_FREQS=64
+
+#
+# Compile librte_net
+#
+CONFIG_RTE_LIBRTE_NET=y
+
+#
+# Compile librte_ip_frag
+#
+CONFIG_RTE_LIBRTE_IP_FRAG=y
+CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
+CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
+CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
+
+#
+# Compile librte_meter
+#
+CONFIG_RTE_LIBRTE_METER=y
+
+#
+# Compile librte_sched
+#
+CONFIG_RTE_LIBRTE_SCHED=y
+CONFIG_RTE_SCHED_DEBUG=n
+CONFIG_RTE_SCHED_RED=n
+CONFIG_RTE_SCHED_COLLECT_STATS=n
+CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
+CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
+CONFIG_RTE_SCHED_VECTOR=n
+
+#
+# Compile the distributor library
+#
+CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
+
+#
+# Compile the reorder library
+#
+CONFIG_RTE_LIBRTE_REORDER=y
+
+#
+# Compile librte_port
+#
+CONFIG_RTE_LIBRTE_PORT=y
+CONFIG_RTE_PORT_STATS_COLLECT=n
+
+#
+# Compile librte_table
+#
+CONFIG_RTE_LIBRTE_TABLE=y
+CONFIG_RTE_TABLE_STATS_COLLECT=n
+
+#
+# Compile librte_pipeline
+#
+CONFIG_RTE_LIBRTE_PIPELINE=y
+CONFIG_RTE_PIPELINE_STATS_COLLECT=n
+
+#
+# Compile librte_kni
+#
+CONFIG_RTE_LIBRTE_KNI=y
+CONFIG_RTE_KNI_KMOD=y
+CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
+CONFIG_RTE_KNI_KO_DEBUG=n
+CONFIG_RTE_KNI_VHOST=n
+CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024
+CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n
+CONFIG_RTE_KNI_VHOST_DEBUG_RX=n
+CONFIG_RTE_KNI_VHOST_DEBUG_TX=n
+
+#
+# Compile vhost library
+# fuse-devel is needed to run vhost-cuse.
+# fuse-devel enables user space char driver development
+# vhost-user is turned on by default.
+#
+CONFIG_RTE_LIBRTE_VHOST=y
+CONFIG_RTE_LIBRTE_VHOST_USER=y
+CONFIG_RTE_LIBRTE_VHOST_NUMA=n
+CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
+
+#
+#Compile Xen domain0 support
+#
+CONFIG_RTE_LIBRTE_XEN_DOM0=n
+
+#
+# Enable warning directives
+#
+CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
+
+#
+# Compile the test application
+#
+CONFIG_RTE_APP_TEST=y
+
+#
+# Compile the PMD test application
+#
+CONFIG_RTE_TEST_PMD=y
+CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
+CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
diff --git a/config/common_bsdapp b/config/common_bsdapp
index 696382c..de0ca7d 100644
--- a/config/common_bsdapp
+++ b/config/common_bsdapp
@@ -1,6 +1,6 @@
 #   BSD LICENSE
 #
-#   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+#   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
 #   All rights reserved.
 #
 #   Redistribution and use in source and binary forms, with or without
@@ -37,74 +37,38 @@
 CONFIG_RTE_EXEC_ENV="bsdapp"
 CONFIG_RTE_EXEC_ENV_BSDAPP=y
 
-##
-## machine can define specific variables or action for a specific board
-## RTE_MACHINE values are the directories in mk/machine/
-##
-#CONFIG_RTE_MACHINE="native"
-#
-##
-## define the architecture we compile for.
-## RTE_ARCH values are the directories in mk/arch/
-##
-#CONFIG_RTE_ARCH="x86_64"
-#CONFIG_RTE_ARCH_X86_64=y
-#CONFIG_RTE_ARCH_X86=y
-#
-##
-## The compiler we use.
-## RTE_TOOLCHAIN values are the directories in mk/toolchain/
-##
-#CONFIG_RTE_TOOLCHAIN="gcc"
-#CONFIG_RTE_TOOLCHAIN_GCC=y
-
-#
-# Use intrinsics or assembly code for key routines
-#
-CONFIG_RTE_FORCE_INTRINSICS=n
+#include "common_base"
 
 #
-# Machine forces strict alignment constraints.
+# Compile Environment Abstraction Layer for linux, FreeBSD, OS X, ...
 #
-CONFIG_RTE_ARCH_STRICT_ALIGN=n
+CONFIG_RTE_LIBRTE_EAL_BSDAPP=y
 
 #
-# Compile to share library
+# Compile Environment Abstraction Layer
 #
-CONFIG_RTE_BUILD_SHARED_LIB=n
+CONFIG_RTE_EAL_IGB_UIO=n
+CONFIG_RTE_EAL_VFIO=n
 
 #
-# Combine to one single library
+# Compile software PMD backed by AF_PACKET sockets (Linux only)
 #
-CONFIG_RTE_BUILD_COMBINE_LIBS=n
+CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
 
 #
-# Use newest code breaking previous ABI
+# Compile librte_power
 #
-CONFIG_RTE_NEXT_ABI=y
+CONFIG_RTE_LIBRTE_POWER=n
 
 #
-# Machine's cache line size
+# Compile librte_kni
 #
-CONFIG_RTE_CACHE_LINE_SIZE=64
+CONFIG_RTE_LIBRTE_KNI=n
 
 #
-# Compile Environment Abstraction Layer
+# Compile vhost library
 #
-CONFIG_RTE_LIBRTE_EAL=y
-CONFIG_RTE_MAX_LCORE=128
-CONFIG_RTE_MAX_NUMA_NODES=8
-CONFIG_RTE_MAX_MEMSEG=256
-CONFIG_RTE_MAX_MEMZONE=2560
-CONFIG_RTE_MAX_TAILQ=32
-CONFIG_RTE_LOG_LEVEL=8
-CONFIG_RTE_LOG_HISTORY=256
-CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
-CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
-CONFIG_RTE_MALLOC_DEBUG=n
-
-# Default driver path (or "" to disable)
-CONFIG_RTE_EAL_PMD_PATH=""
+CONFIG_RTE_LIBRTE_VHOST=n
 
 #
 # FreeBSD contiguous memory driver settings
@@ -113,373 +77,3 @@ CONFIG_RTE_CONTIGMEM_MAX_NUM_BUFS=64
 CONFIG_RTE_CONTIGMEM_DEFAULT_NUM_BUFS=2
 CONFIG_RTE_CONTIGMEM_DEFAULT_BUF_SIZE=1024*1024*1024
 
-#
-# Compile Environment Abstraction Layer for BSD
-#
-CONFIG_RTE_LIBRTE_EAL_BSDAPP=y
-
-#
-# Compile Environment Abstraction Layer for linux
-#
-CONFIG_RTE_LIBRTE_EAL_LINUXAPP=n
-
-#
-# Compile Environment Abstraction Layer to support Vmware TSC map
-#
-CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
-
-#
-# Compile the argument parser library
-#
-CONFIG_RTE_LIBRTE_KVARGS=y
-
-#
-# Compile generic ethernet library
-#
-CONFIG_RTE_LIBRTE_ETHER=y
-CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
-CONFIG_RTE_MAX_ETHPORTS=32
-CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
-CONFIG_RTE_LIBRTE_IEEE1588=n
-CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
-CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
-
-#
-# Support NIC bypass logic
-#
-CONFIG_RTE_NIC_BYPASS=n
-
-#
-# Compile burst-oriented IGB & EM PMD drivers
-#
-CONFIG_RTE_LIBRTE_EM_PMD=y
-CONFIG_RTE_LIBRTE_IGB_PMD=y
-CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
-
-#
-# Compile burst-oriented IXGBE PMD driver
-#
-CONFIG_RTE_LIBRTE_IXGBE_PMD=y
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
-CONFIG_RTE_IXGBE_INC_VECTOR=y
-CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y
-
-#
-# Compile burst-oriented I40E PMD driver
-#
-CONFIG_RTE_LIBRTE_I40E_PMD=y
-CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
-CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
-CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y
-CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
-# interval up to 8160 us, aligned to 2 (or default value)
-CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
-
-#
-# Compile burst-oriented FM10K PMD
-#
-CONFIG_RTE_LIBRTE_FM10K_PMD=y
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
-
-#
-# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
-#
-CONFIG_RTE_LIBRTE_MLX4_PMD=n
-CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
-CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
-CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
-CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
-
-#
-# Compile burst-oriented Mellanox ConnectX-4 (MLX5) PMD
-#
-CONFIG_RTE_LIBRTE_MLX5_PMD=n
-CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N=4
-CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE=0
-CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
-
-#
-# Compile burst-oriented Broadcom PMD driver
-#
-CONFIG_RTE_LIBRTE_BNX2X_PMD=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
-
-#
-# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
-#
-CONFIG_RTE_LIBRTE_CXGBE_PMD=y
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
-
-#
-# Compile burst-oriented Cisco ENIC PMD driver
-#
-CONFIG_RTE_LIBRTE_ENIC_PMD=y
-CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
-
-#
-# Compile software PMD backed by SZEDATA2 device
-#
-CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
-
-#
-# Compile burst-oriented VIRTIO PMD driver
-#
-CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
-
-#
-# Compile burst-oriented VMXNET3 PMD driver
-#
-CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
-
-#
-# Compile example software rings based PMD
-#
-CONFIG_RTE_LIBRTE_PMD_RING=y
-CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
-CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
-
-#
-# Compile software PMD backed by PCAP files
-#
-CONFIG_RTE_LIBRTE_PMD_PCAP=y
-
-#
-# Compile link bonding PMD library
-#
-CONFIG_RTE_LIBRTE_PMD_BOND=y
-CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
-CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
-
-#
-# Compile null PMD
-#
-CONFIG_RTE_LIBRTE_PMD_NULL=y
-
-#
-# Do prefetch of packet data within PMD driver receive function
-#
-CONFIG_RTE_PMD_PACKET_PREFETCH=y
-
-#
-# Compile generic crypto device library
-# EXPERIMENTAL: API may change without prior notice
-#
-CONFIG_RTE_LIBRTE_CRYPTODEV=y
-CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
-CONFIG_RTE_CRYPTO_MAX_DEVS=64
-CONFIG_RTE_CRYPTODEV_NAME_LEN=64
-
-#
-# Compile PMD for QuickAssist based devices
-#
-CONFIG_RTE_LIBRTE_PMD_QAT=n
-CONFIG_RTE_LIBRTE_QAT_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_QAT_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_QAT_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_QAT_DEBUG_DRIVER=n
-#
-# Number of sessions to create in the session memory pool
-# on a single QuickAssist device.
-#
-CONFIG_RTE_MAX_QAT_SESSIONS=200
-
-#
-# Compile PMD for AESNI backed device
-#
-CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
-CONFIG_RTE_LIBRTE_AESNI_MB_DEBUG=n
-
-#
-# Compile librte_ring
-#
-CONFIG_RTE_LIBRTE_RING=y
-CONFIG_RTE_LIBRTE_RING_DEBUG=n
-CONFIG_RTE_RING_SPLIT_PROD_CONS=n
-CONFIG_RTE_RING_PAUSE_REP_COUNT=0
-
-#
-# Compile librte_mempool
-#
-CONFIG_RTE_LIBRTE_MEMPOOL=y
-CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
-CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
-
-#
-# Compile librte_mbuf
-#
-CONFIG_RTE_LIBRTE_MBUF=y
-CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
-CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
-CONFIG_RTE_PKTMBUF_HEADROOM=128
-
-#
-# Compile librte_mbuf_offload
-# EXPERIMENTAL: API may change without prior notice
-#
-CONFIG_RTE_LIBRTE_MBUF_OFFLOAD=y
-CONFIG_RTE_LIBRTE_MBUF_OFFLOAD_DEBUG=n
-
-#
-# Compile librte_timer
-#
-CONFIG_RTE_LIBRTE_TIMER=y
-CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
-
-#
-# Compile librte_cfgfile
-#
-CONFIG_RTE_LIBRTE_CFGFILE=y
-
-#
-# Compile librte_cmdline
-#
-CONFIG_RTE_LIBRTE_CMDLINE=y
-CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
-
-#
-# Compile librte_hash
-#
-CONFIG_RTE_LIBRTE_HASH=y
-CONFIG_RTE_LIBRTE_HASH_DEBUG=n
-
-#
-# Compile librte_jobstats
-#
-CONFIG_RTE_LIBRTE_JOBSTATS=y
-
-#
-# Compile librte_lpm
-#
-CONFIG_RTE_LIBRTE_LPM=y
-CONFIG_RTE_LIBRTE_LPM_DEBUG=n
-
-#
-# Compile librte_acl
-#
-CONFIG_RTE_LIBRTE_ACL=y
-CONFIG_RTE_LIBRTE_ACL_DEBUG=n
-
-#
-# Compile librte_power
-#
-CONFIG_RTE_LIBRTE_POWER=n
-CONFIG_RTE_LIBRTE_POWER_DEBUG=n
-CONFIG_RTE_MAX_LCORE_FREQS=64
-
-#
-# Compile librte_net
-#
-CONFIG_RTE_LIBRTE_NET=y
-
-#
-# Compile librte_ip_frag
-#
-CONFIG_RTE_LIBRTE_IP_FRAG=y
-CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
-CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
-CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
-
-#
-# Compile librte_meter
-#
-CONFIG_RTE_LIBRTE_METER=y
-
-#
-# Compile librte_sched
-#
-CONFIG_RTE_LIBRTE_SCHED=y
-CONFIG_RTE_SCHED_DEBUG=n
-CONFIG_RTE_SCHED_RED=n
-CONFIG_RTE_SCHED_COLLECT_STATS=n
-CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
-CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
-CONFIG_RTE_SCHED_VECTOR=n
-
-#
-# Compile the distributor library
-#
-CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
-
-#
-# Compile the reorder library
-#
-CONFIG_RTE_LIBRTE_REORDER=y
-
-#
-# Compile librte_port
-#
-CONFIG_RTE_LIBRTE_PORT=y
-CONFIG_RTE_PORT_STATS_COLLECT=n
-
-#
-# Compile librte_table
-#
-CONFIG_RTE_LIBRTE_TABLE=y
-CONFIG_RTE_TABLE_STATS_COLLECT=n
-
-#
-# Compile librte_pipeline
-#
-CONFIG_RTE_LIBRTE_PIPELINE=y
-CONFIG_RTE_PIPELINE_STATS_COLLECT=n
-
-#
-# Enable warning directives
-#
-CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
-
-#
-# Compile the test application
-#
-CONFIG_RTE_APP_TEST=y
-
-#
-# Compile the PMD test application
-#
-CONFIG_RTE_TEST_PMD=y
-CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
-CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
diff --git a/config/common_linuxapp b/config/common_linuxapp
index f1638db..64ddbe9 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -1,6 +1,6 @@
 #   BSD LICENSE
 #
-#   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+#   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
 #   All rights reserved.
 #
 #   Redistribution and use in source and binary forms, with or without
@@ -37,494 +37,9 @@
 CONFIG_RTE_EXEC_ENV="linuxapp"
 CONFIG_RTE_EXEC_ENV_LINUXAPP=y
 
-##
-## machine can define specific variables or action for a specific board
-## RTE_MACHINE values are the directories in mk/machine/
-##
-#CONFIG_RTE_MACHINE="native"
-#
-##
-## define the architecture we compile for.
-## RTE_ARCH values are the directories in mk/arch/
-##
-#CONFIG_RTE_ARCH="x86_64"
-#CONFIG_RTE_ARCH_X86_64=y
-#CONFIG_RTE_ARCH_X86=y
-#
-##
-## The compiler we use.
-## RTE_TOOLCHAIN values are the directories in mk/toolchain/
-##
-#CONFIG_RTE_TOOLCHAIN="gcc"
-#CONFIG_RTE_TOOLCHAIN_GCC=y
-
-#
-# Use intrinsics or assembly code for key routines
-#
-CONFIG_RTE_FORCE_INTRINSICS=n
-
-#
-# Machine forces strict alignment constraints.
-#
-CONFIG_RTE_ARCH_STRICT_ALIGN=n
-
-#
-# Compile to share library
-#
-CONFIG_RTE_BUILD_SHARED_LIB=n
-
-#
-# Combine to one single library
-#
-CONFIG_RTE_BUILD_COMBINE_LIBS=n
-
-#
-# Use newest code breaking previous ABI
-#
-CONFIG_RTE_NEXT_ABI=y
-
-#
-# Machine's cache line size
-#
-CONFIG_RTE_CACHE_LINE_SIZE=64
-
-#
-# Compile Environment Abstraction Layer
-#
-CONFIG_RTE_LIBRTE_EAL=y
-CONFIG_RTE_MAX_LCORE=128
-CONFIG_RTE_MAX_NUMA_NODES=8
-CONFIG_RTE_MAX_MEMSEG=256
-CONFIG_RTE_MAX_MEMZONE=2560
-CONFIG_RTE_MAX_TAILQ=32
-CONFIG_RTE_LOG_LEVEL=8
-CONFIG_RTE_LOG_HISTORY=256
-CONFIG_RTE_LIBEAL_USE_HPET=n
-CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
-CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
-CONFIG_RTE_EAL_IGB_UIO=y
-CONFIG_RTE_EAL_VFIO=y
-CONFIG_RTE_MALLOC_DEBUG=n
-# Default driver path (or "" to disable)
-CONFIG_RTE_EAL_PMD_PATH=""
-
-#
-# Special configurations in PCI Config Space for high performance
-#
-CONFIG_RTE_PCI_CONFIG=n
-CONFIG_RTE_PCI_EXTENDED_TAG=""
-CONFIG_RTE_PCI_MAX_READ_REQUEST_SIZE=0
+#include "common_base"
 
 #
-# Compile Environment Abstraction Layer for linux
+# Compile Environment Abstraction Layer for linux, FreeBSD, OS X, ...
 #
 CONFIG_RTE_LIBRTE_EAL_LINUXAPP=y
-
-#
-# Compile Environment Abstraction Layer to support Vmware TSC map
-#
-CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
-
-#
-# Compile the argument parser library
-#
-CONFIG_RTE_LIBRTE_KVARGS=y
-
-#
-# Compile generic ethernet library
-#
-CONFIG_RTE_LIBRTE_ETHER=y
-CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
-CONFIG_RTE_MAX_ETHPORTS=32
-CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
-CONFIG_RTE_LIBRTE_IEEE1588=n
-CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
-CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
-
-#
-# Support NIC bypass logic
-#
-CONFIG_RTE_NIC_BYPASS=n
-
-#
-# Compile burst-oriented IGB & EM PMD drivers
-#
-CONFIG_RTE_LIBRTE_EM_PMD=y
-CONFIG_RTE_LIBRTE_IGB_PMD=y
-CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
-
-#
-# Compile burst-oriented IXGBE PMD driver
-#
-CONFIG_RTE_LIBRTE_IXGBE_PMD=y
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
-CONFIG_RTE_IXGBE_INC_VECTOR=y
-CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y
-
-#
-# Compile burst-oriented I40E PMD driver
-#
-CONFIG_RTE_LIBRTE_I40E_PMD=y
-CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
-CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
-CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y
-CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
-# interval up to 8160 us, aligned to 2 (or default value)
-CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
-
-#
-# Compile burst-oriented FM10K PMD
-#
-CONFIG_RTE_LIBRTE_FM10K_PMD=y
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
-CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
-
-#
-# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
-#
-CONFIG_RTE_LIBRTE_MLX4_PMD=n
-CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
-CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
-CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
-CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
-
-#
-# Compile burst-oriented Mellanox ConnectX-4 (MLX5) PMD
-#
-CONFIG_RTE_LIBRTE_MLX5_PMD=n
-CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N=4
-CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE=0
-CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
-
-#
-# Compile burst-oriented Broadcom PMD driver
-#
-CONFIG_RTE_LIBRTE_BNX2X_PMD=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
-
-#
-# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
-#
-CONFIG_RTE_LIBRTE_CXGBE_PMD=y
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
-
-#
-# Compile burst-oriented Cisco ENIC PMD driver
-#
-CONFIG_RTE_LIBRTE_ENIC_PMD=y
-CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
-
-#
-# Compile burst-oriented Netronome NFP PMD driver
-#
-CONFIG_RTE_LIBRTE_NFP_PMD=n
-CONFIG_RTE_LIBRTE_NFP_DEBUG=n
-
-#
-# Compile software PMD backed by SZEDATA2 device
-#
-CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
-
-#
-# Compile burst-oriented VIRTIO PMD driver
-#
-CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
-
-#
-# Compile burst-oriented VMXNET3 PMD driver
-#
-CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
-
-#
-# Compile example software rings based PMD
-#
-CONFIG_RTE_LIBRTE_PMD_RING=y
-CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
-CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
-
-#
-# Compile software PMD backed by PCAP files
-#
-CONFIG_RTE_LIBRTE_PMD_PCAP=n
-
-#
-# Compile link bonding PMD library
-#
-CONFIG_RTE_LIBRTE_PMD_BOND=y
-CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
-CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
-
-#
-# Compile software PMD backed by AF_PACKET sockets (Linux only)
-#
-CONFIG_RTE_LIBRTE_PMD_AF_PACKET=y
-
-#
-# Compile Xen PMD
-#
-CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
-
-#
-# Compile null PMD
-#
-CONFIG_RTE_LIBRTE_PMD_NULL=y
-
-#
-# Do prefetch of packet data within PMD driver receive function
-#
-CONFIG_RTE_PMD_PACKET_PREFETCH=y
-
-#
-# Compile generic crypto device library
-# EXPERIMENTAL: API may change without prior notice
-#
-CONFIG_RTE_LIBRTE_CRYPTODEV=y
-CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
-CONFIG_RTE_CRYPTO_MAX_DEVS=64
-CONFIG_RTE_CRYPTODEV_NAME_LEN=64
-
-#
-# Compile PMD for QuickAssist based devices
-#
-CONFIG_RTE_LIBRTE_PMD_QAT=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
-#
-# Number of sessions to create in the session memory pool
-# on a single QuickAssist device.
-#
-CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
-
-#
-# Compile PMD for AESNI backed device
-#
-CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
-CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
-CONFIG_RTE_AESNI_MB_PMD_MAX_NB_QUEUE_PAIRS=8
-CONFIG_RTE_AESNI_MB_PMD_MAX_NB_SESSIONS=2048
-
-#
-# Compile librte_ring
-#
-CONFIG_RTE_LIBRTE_RING=y
-CONFIG_RTE_LIBRTE_RING_DEBUG=n
-CONFIG_RTE_RING_SPLIT_PROD_CONS=n
-CONFIG_RTE_RING_PAUSE_REP_COUNT=0
-
-#
-# Compile librte_mempool
-#
-CONFIG_RTE_LIBRTE_MEMPOOL=y
-CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
-CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
-
-#
-# Compile librte_mbuf
-#
-CONFIG_RTE_LIBRTE_MBUF=y
-CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
-CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
-CONFIG_RTE_PKTMBUF_HEADROOM=128
-
-#
-# Compile librte_mbuf_offload
-# EXPERIMENTAL: API may change without prior notice
-#
-CONFIG_RTE_LIBRTE_MBUF_OFFLOAD=y
-CONFIG_RTE_LIBRTE_MBUF_OFFLOAD_DEBUG=n
-
-#
-# Compile librte_timer
-#
-CONFIG_RTE_LIBRTE_TIMER=y
-CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
-
-#
-# Compile librte_cfgfile
-#
-CONFIG_RTE_LIBRTE_CFGFILE=y
-
-#
-# Compile librte_cmdline
-#
-CONFIG_RTE_LIBRTE_CMDLINE=y
-CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
-
-#
-# Compile librte_hash
-#
-CONFIG_RTE_LIBRTE_HASH=y
-CONFIG_RTE_LIBRTE_HASH_DEBUG=n
-
-#
-# Compile librte_jobstats
-#
-CONFIG_RTE_LIBRTE_JOBSTATS=y
-
-#
-# Compile librte_lpm
-#
-CONFIG_RTE_LIBRTE_LPM=y
-CONFIG_RTE_LIBRTE_LPM_DEBUG=n
-
-#
-# Compile librte_acl
-#
-CONFIG_RTE_LIBRTE_ACL=y
-CONFIG_RTE_LIBRTE_ACL_DEBUG=n
-
-#
-# Compile librte_power
-#
-CONFIG_RTE_LIBRTE_POWER=y
-CONFIG_RTE_LIBRTE_POWER_DEBUG=n
-CONFIG_RTE_MAX_LCORE_FREQS=64
-
-#
-# Compile librte_net
-#
-CONFIG_RTE_LIBRTE_NET=y
-
-#
-# Compile librte_ip_frag
-#
-CONFIG_RTE_LIBRTE_IP_FRAG=y
-CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
-CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
-CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
-
-#
-# Compile librte_meter
-#
-CONFIG_RTE_LIBRTE_METER=y
-
-#
-# Compile librte_sched
-#
-CONFIG_RTE_LIBRTE_SCHED=y
-CONFIG_RTE_SCHED_DEBUG=n
-CONFIG_RTE_SCHED_RED=n
-CONFIG_RTE_SCHED_COLLECT_STATS=n
-CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
-CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
-CONFIG_RTE_SCHED_VECTOR=n
-
-#
-# Compile the distributor library
-#
-CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
-
-#
-# Compile the reorder library
-#
-CONFIG_RTE_LIBRTE_REORDER=y
-
-#
-# Compile librte_port
-#
-CONFIG_RTE_LIBRTE_PORT=y
-CONFIG_RTE_PORT_STATS_COLLECT=n
-
-#
-# Compile librte_table
-#
-CONFIG_RTE_LIBRTE_TABLE=y
-CONFIG_RTE_TABLE_STATS_COLLECT=n
-
-#
-# Compile librte_pipeline
-#
-CONFIG_RTE_LIBRTE_PIPELINE=y
-CONFIG_RTE_PIPELINE_STATS_COLLECT=n
-
-#
-# Compile librte_kni
-#
-CONFIG_RTE_LIBRTE_KNI=y
-CONFIG_RTE_KNI_KMOD=y
-CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
-CONFIG_RTE_KNI_KO_DEBUG=n
-CONFIG_RTE_KNI_VHOST=n
-CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024
-CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n
-CONFIG_RTE_KNI_VHOST_DEBUG_RX=n
-CONFIG_RTE_KNI_VHOST_DEBUG_TX=n
-
-#
-# Compile vhost library
-# fuse-devel is needed to run vhost-cuse.
-# fuse-devel enables user space char driver development
-# vhost-user is turned on by default.
-#
-CONFIG_RTE_LIBRTE_VHOST=y
-CONFIG_RTE_LIBRTE_VHOST_USER=y
-CONFIG_RTE_LIBRTE_VHOST_NUMA=n
-CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
-
-#
-#Compile Xen domain0 support
-#
-CONFIG_RTE_LIBRTE_XEN_DOM0=n
-
-#
-# Enable warning directives
-#
-CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
-
-#
-# Compile the test application
-#
-CONFIG_RTE_APP_TEST=y
-
-#
-# Compile the PMD test application
-#
-CONFIG_RTE_TEST_PMD=y
-CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
-CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
diff --git a/config/defconfig_x86_64-native-bsdapp-clang b/config/defconfig_x86_64-native-bsdapp-clang
index d2baf2c..8b870b3 100644
--- a/config/defconfig_x86_64-native-bsdapp-clang
+++ b/config/defconfig_x86_64-native-bsdapp-clang
@@ -37,6 +37,7 @@ CONFIG_RTE_MACHINE="native"
 CONFIG_RTE_ARCH="x86_64"
 CONFIG_RTE_ARCH_X86_64=y
 CONFIG_RTE_ARCH_X86=y
+CONFIG_RTE_ARCH_64=y
 
 CONFIG_RTE_TOOLCHAIN="clang"
 CONFIG_RTE_TOOLCHAIN_CLANG=y
diff --git a/config/defconfig_x86_64-native-bsdapp-gcc b/config/defconfig_x86_64-native-bsdapp-gcc
index 5a6a4e8..4ea4433 100644
--- a/config/defconfig_x86_64-native-bsdapp-gcc
+++ b/config/defconfig_x86_64-native-bsdapp-gcc
@@ -37,6 +37,7 @@ CONFIG_RTE_MACHINE="native"
 CONFIG_RTE_ARCH="x86_64"
 CONFIG_RTE_ARCH_X86_64=y
 CONFIG_RTE_ARCH_X86=y
+CONFIG_RTE_ARCH_64=y
 
 CONFIG_RTE_TOOLCHAIN="gcc"
 CONFIG_RTE_TOOLCHAIN_GCC=y
-- 
2.7.0

             reply	other threads:[~2016-02-22 13:54 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-22 13:53 Keith Wiles [this message]
2016-02-22 15:09 ` Trahe, Fiona
2016-02-22 16:02   ` Wiles, Keith
2016-02-22 16:44     ` Panu Matilainen
2016-02-24 13:58 ` Wiles, Keith
2016-02-24 14:19   ` Trahe, Fiona
2016-02-24 15:25     ` Wiles, Keith
2016-03-03 14:43 ` Wiles, Keith
2016-03-03 17:05   ` Thomas Monjalon
2016-03-03 18:37 ` Thomas Monjalon
2016-03-03 18:47   ` Wiles, Keith
2016-03-04 14:44     ` Wiles, Keith
2016-03-04 15:26       ` Thomas Monjalon
2016-03-04  9:28   ` Traynor, Kevin
2016-03-04  9:39     ` Panu Matilainen
2016-03-04  9:58       ` Traynor, Kevin
2016-03-04 10:28         ` Thomas Monjalon
2016-03-04 14:11     ` Wiles, Keith
2016-03-04  9:35   ` Panu Matilainen
2016-03-04 10:12   ` Panu Matilainen
2016-03-04 14:12     ` Wiles, Keith
2016-03-04 17:01   ` [dpdk-dev] [PATCH v2] " Keith Wiles
2016-03-04 17:26     ` Thomas Monjalon
2016-03-04 18:07       ` Wiles, Keith
2016-03-04 18:11   ` [dpdk-dev] [PATCH v3] " Keith Wiles
2016-03-04 22:43     ` Thomas Monjalon
2016-03-06  1:11       ` Ferruh Yigit
2016-03-06  1:21         ` [dpdk-dev] [PATCH] config: move Linux only config options from base to Linux config Ferruh Yigit
2016-03-06  9:35         ` [dpdk-dev] [PATCH v3] config: remove duplicate configuration information Thomas Monjalon
2016-03-07 12:41           ` Bruce Richardson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1456149217-24833-1-git-send-email-keith.wiles@intel.com \
    --to=keith.wiles@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).