From: Jianbo Liu <jianbo.liu@linaro.org>
To: dev@dpdk.org, jerin.jacob@caviumnetworks.com,
helin.zhang@intel.com, konstantin.ananyev@intel.com
Cc: Jianbo Liu <jianbo.liu@linaro.org>
Subject: [dpdk-dev] [PATCH 1/4] ixgbe: rearrange vector PMD code for x86
Date: Wed, 20 Apr 2016 21:44:59 +0800 [thread overview]
Message-ID: <1461159902-16680-1-git-send-email-jianbo.liu@linaro.org> (raw)
move SSE-dependent code to new file "ixgbe_rxtx_vec_sse.h"
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
---
drivers/net/ixgbe/ixgbe_rxtx_vec.c | 369 +----------------------------
drivers/net/ixgbe/ixgbe_rxtx_vec_sse.h | 408 +++++++++++++++++++++++++++++++++
2 files changed, 409 insertions(+), 368 deletions(-)
create mode 100644 drivers/net/ixgbe/ixgbe_rxtx_vec_sse.h
diff --git a/drivers/net/ixgbe/ixgbe_rxtx_vec.c b/drivers/net/ixgbe/ixgbe_rxtx_vec.c
index 5040704..064a00b 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx_vec.c
+++ b/drivers/net/ixgbe/ixgbe_rxtx_vec.c
@@ -38,364 +38,7 @@
#include "ixgbe_ethdev.h"
#include "ixgbe_rxtx.h"
-#include <tmmintrin.h>
-
-#ifndef __INTEL_COMPILER
-#pragma GCC diagnostic ignored "-Wcast-qual"
-#endif
-
-static inline void
-ixgbe_rxq_rearm(struct ixgbe_rx_queue *rxq)
-{
- int i;
- uint16_t rx_id;
- volatile union ixgbe_adv_rx_desc *rxdp;
- struct ixgbe_rx_entry *rxep = &rxq->sw_ring[rxq->rxrearm_start];
- struct rte_mbuf *mb0, *mb1;
- __m128i hdr_room = _mm_set_epi64x(RTE_PKTMBUF_HEADROOM,
- RTE_PKTMBUF_HEADROOM);
- __m128i dma_addr0, dma_addr1;
-
- const __m128i hba_msk = _mm_set_epi64x(0, UINT64_MAX);
-
- rxdp = rxq->rx_ring + rxq->rxrearm_start;
-
- /* Pull 'n' more MBUFs into the software ring */
- if (rte_mempool_get_bulk(rxq->mb_pool,
- (void *)rxep,
- RTE_IXGBE_RXQ_REARM_THRESH) < 0) {
- if (rxq->rxrearm_nb + RTE_IXGBE_RXQ_REARM_THRESH >=
- rxq->nb_rx_desc) {
- dma_addr0 = _mm_setzero_si128();
- for (i = 0; i < RTE_IXGBE_DESCS_PER_LOOP; i++) {
- rxep[i].mbuf = &rxq->fake_mbuf;
- _mm_store_si128((__m128i *)&rxdp[i].read,
- dma_addr0);
- }
- }
- rte_eth_devices[rxq->port_id].data->rx_mbuf_alloc_failed +=
- RTE_IXGBE_RXQ_REARM_THRESH;
- return;
- }
-
- /* Initialize the mbufs in vector, process 2 mbufs in one loop */
- for (i = 0; i < RTE_IXGBE_RXQ_REARM_THRESH; i += 2, rxep += 2) {
- __m128i vaddr0, vaddr1;
- uintptr_t p0, p1;
-
- mb0 = rxep[0].mbuf;
- mb1 = rxep[1].mbuf;
-
- /*
- * Flush mbuf with pkt template.
- * Data to be rearmed is 6 bytes long.
- * Though, RX will overwrite ol_flags that are coming next
- * anyway. So overwrite whole 8 bytes with one load:
- * 6 bytes of rearm_data plus first 2 bytes of ol_flags.
- */
- p0 = (uintptr_t)&mb0->rearm_data;
- *(uint64_t *)p0 = rxq->mbuf_initializer;
- p1 = (uintptr_t)&mb1->rearm_data;
- *(uint64_t *)p1 = rxq->mbuf_initializer;
-
- /* load buf_addr(lo 64bit) and buf_physaddr(hi 64bit) */
- vaddr0 = _mm_loadu_si128((__m128i *)&(mb0->buf_addr));
- vaddr1 = _mm_loadu_si128((__m128i *)&(mb1->buf_addr));
-
- /* convert pa to dma_addr hdr/data */
- dma_addr0 = _mm_unpackhi_epi64(vaddr0, vaddr0);
- dma_addr1 = _mm_unpackhi_epi64(vaddr1, vaddr1);
-
- /* add headroom to pa values */
- dma_addr0 = _mm_add_epi64(dma_addr0, hdr_room);
- dma_addr1 = _mm_add_epi64(dma_addr1, hdr_room);
-
- /* set Header Buffer Address to zero */
- dma_addr0 = _mm_and_si128(dma_addr0, hba_msk);
- dma_addr1 = _mm_and_si128(dma_addr1, hba_msk);
-
- /* flush desc with pa dma_addr */
- _mm_store_si128((__m128i *)&rxdp++->read, dma_addr0);
- _mm_store_si128((__m128i *)&rxdp++->read, dma_addr1);
- }
-
- rxq->rxrearm_start += RTE_IXGBE_RXQ_REARM_THRESH;
- if (rxq->rxrearm_start >= rxq->nb_rx_desc)
- rxq->rxrearm_start = 0;
-
- rxq->rxrearm_nb -= RTE_IXGBE_RXQ_REARM_THRESH;
-
- rx_id = (uint16_t) ((rxq->rxrearm_start == 0) ?
- (rxq->nb_rx_desc - 1) : (rxq->rxrearm_start - 1));
-
- /* Update the tail pointer on the NIC */
- IXGBE_PCI_REG_WRITE(rxq->rdt_reg_addr, rx_id);
-}
-
-/* Handling the offload flags (olflags) field takes computation
- * time when receiving packets. Therefore we provide a flag to disable
- * the processing of the olflags field when they are not needed. This
- * gives improved performance, at the cost of losing the offload info
- * in the received packet
- */
-#ifdef RTE_IXGBE_RX_OLFLAGS_ENABLE
-
-#define VTAG_SHIFT (3)
-
-static inline void
-desc_to_olflags_v(__m128i descs[4], struct rte_mbuf **rx_pkts)
-{
- __m128i ptype0, ptype1, vtag0, vtag1;
- union {
- uint16_t e[4];
- uint64_t dword;
- } vol;
-
- /* pkt type + vlan olflags mask */
- const __m128i pkttype_msk = _mm_set_epi16(
- 0x0000, 0x0000, 0x0000, 0x0000,
- PKT_RX_VLAN_PKT, PKT_RX_VLAN_PKT, PKT_RX_VLAN_PKT, PKT_RX_VLAN_PKT);
-
- /* mask everything except rss type */
- const __m128i rsstype_msk = _mm_set_epi16(
- 0x0000, 0x0000, 0x0000, 0x0000,
- 0x000F, 0x000F, 0x000F, 0x000F);
-
- /* map rss type to rss hash flag */
- const __m128i rss_flags = _mm_set_epi8(PKT_RX_FDIR, 0, 0, 0,
- 0, 0, 0, PKT_RX_RSS_HASH,
- PKT_RX_RSS_HASH, 0, PKT_RX_RSS_HASH, 0,
- PKT_RX_RSS_HASH, PKT_RX_RSS_HASH, PKT_RX_RSS_HASH, 0);
-
- ptype0 = _mm_unpacklo_epi16(descs[0], descs[1]);
- ptype1 = _mm_unpacklo_epi16(descs[2], descs[3]);
- vtag0 = _mm_unpackhi_epi16(descs[0], descs[1]);
- vtag1 = _mm_unpackhi_epi16(descs[2], descs[3]);
-
- ptype0 = _mm_unpacklo_epi32(ptype0, ptype1);
- ptype0 = _mm_and_si128(ptype0, rsstype_msk);
- ptype0 = _mm_shuffle_epi8(rss_flags, ptype0);
-
- vtag1 = _mm_unpacklo_epi32(vtag0, vtag1);
- vtag1 = _mm_srli_epi16(vtag1, VTAG_SHIFT);
- vtag1 = _mm_and_si128(vtag1, pkttype_msk);
-
- vtag1 = _mm_or_si128(ptype0, vtag1);
- vol.dword = _mm_cvtsi128_si64(vtag1);
-
- rx_pkts[0]->ol_flags = vol.e[0];
- rx_pkts[1]->ol_flags = vol.e[1];
- rx_pkts[2]->ol_flags = vol.e[2];
- rx_pkts[3]->ol_flags = vol.e[3];
-}
-#else
-#define desc_to_olflags_v(desc, rx_pkts) do {} while (0)
-#endif
-
-/*
- * vPMD raw receive routine, only accept(nb_pkts >= RTE_IXGBE_DESCS_PER_LOOP)
- *
- * Notice:
- * - nb_pkts < RTE_IXGBE_DESCS_PER_LOOP, just return no packet
- * - nb_pkts > RTE_IXGBE_MAX_RX_BURST, only scan RTE_IXGBE_MAX_RX_BURST
- * numbers of DD bit
- * - floor align nb_pkts to a RTE_IXGBE_DESC_PER_LOOP power-of-two
- * - don't support ol_flags for rss and csum err
- */
-static inline uint16_t
-_recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts,
- uint16_t nb_pkts, uint8_t *split_packet)
-{
- volatile union ixgbe_adv_rx_desc *rxdp;
- struct ixgbe_rx_entry *sw_ring;
- uint16_t nb_pkts_recd;
- int pos;
- uint64_t var;
- __m128i shuf_msk;
- __m128i crc_adjust = _mm_set_epi16(
- 0, 0, 0, /* ignore non-length fields */
- -rxq->crc_len, /* sub crc on data_len */
- 0, /* ignore high-16bits of pkt_len */
- -rxq->crc_len, /* sub crc on pkt_len */
- 0, 0 /* ignore pkt_type field */
- );
- __m128i dd_check, eop_check;
-
- /* nb_pkts shall be less equal than RTE_IXGBE_MAX_RX_BURST */
- nb_pkts = RTE_MIN(nb_pkts, RTE_IXGBE_MAX_RX_BURST);
-
- /* nb_pkts has to be floor-aligned to RTE_IXGBE_DESCS_PER_LOOP */
- nb_pkts = RTE_ALIGN_FLOOR(nb_pkts, RTE_IXGBE_DESCS_PER_LOOP);
-
- /* Just the act of getting into the function from the application is
- * going to cost about 7 cycles */
- rxdp = rxq->rx_ring + rxq->rx_tail;
-
- _mm_prefetch((const void *)rxdp, _MM_HINT_T0);
-
- /* See if we need to rearm the RX queue - gives the prefetch a bit
- * of time to act */
- if (rxq->rxrearm_nb > RTE_IXGBE_RXQ_REARM_THRESH)
- ixgbe_rxq_rearm(rxq);
-
- /* Before we start moving massive data around, check to see if
- * there is actually a packet available */
- if (!(rxdp->wb.upper.status_error &
- rte_cpu_to_le_32(IXGBE_RXDADV_STAT_DD)))
- return 0;
-
- /* 4 packets DD mask */
- dd_check = _mm_set_epi64x(0x0000000100000001LL, 0x0000000100000001LL);
-
- /* 4 packets EOP mask */
- eop_check = _mm_set_epi64x(0x0000000200000002LL, 0x0000000200000002LL);
-
- /* mask to shuffle from desc. to mbuf */
- shuf_msk = _mm_set_epi8(
- 7, 6, 5, 4, /* octet 4~7, 32bits rss */
- 15, 14, /* octet 14~15, low 16 bits vlan_macip */
- 13, 12, /* octet 12~13, 16 bits data_len */
- 0xFF, 0xFF, /* skip high 16 bits pkt_len, zero out */
- 13, 12, /* octet 12~13, low 16 bits pkt_len */
- 0xFF, 0xFF, /* skip 32 bit pkt_type */
- 0xFF, 0xFF
- );
-
- /* Cache is empty -> need to scan the buffer rings, but first move
- * the next 'n' mbufs into the cache */
- sw_ring = &rxq->sw_ring[rxq->rx_tail];
-
- /* A. load 4 packet in one loop
- * [A*. mask out 4 unused dirty field in desc]
- * B. copy 4 mbuf point from swring to rx_pkts
- * C. calc the number of DD bits among the 4 packets
- * [C*. extract the end-of-packet bit, if requested]
- * D. fill info. from desc to mbuf
- */
- for (pos = 0, nb_pkts_recd = 0; pos < nb_pkts;
- pos += RTE_IXGBE_DESCS_PER_LOOP,
- rxdp += RTE_IXGBE_DESCS_PER_LOOP) {
- __m128i descs[RTE_IXGBE_DESCS_PER_LOOP];
- __m128i pkt_mb1, pkt_mb2, pkt_mb3, pkt_mb4;
- __m128i zero, staterr, sterr_tmp1, sterr_tmp2;
- __m128i mbp1, mbp2; /* two mbuf pointer in one XMM reg. */
-
- /* B.1 load 1 mbuf point */
- mbp1 = _mm_loadu_si128((__m128i *)&sw_ring[pos]);
-
- /* Read desc statuses backwards to avoid race condition */
- /* A.1 load 4 pkts desc */
- descs[3] = _mm_loadu_si128((__m128i *)(rxdp + 3));
-
- /* B.2 copy 2 mbuf point into rx_pkts */
- _mm_storeu_si128((__m128i *)&rx_pkts[pos], mbp1);
-
- /* B.1 load 1 mbuf point */
- mbp2 = _mm_loadu_si128((__m128i *)&sw_ring[pos+2]);
-
- descs[2] = _mm_loadu_si128((__m128i *)(rxdp + 2));
- /* B.1 load 2 mbuf point */
- descs[1] = _mm_loadu_si128((__m128i *)(rxdp + 1));
- descs[0] = _mm_loadu_si128((__m128i *)(rxdp));
-
- /* B.2 copy 2 mbuf point into rx_pkts */
- _mm_storeu_si128((__m128i *)&rx_pkts[pos+2], mbp2);
-
- if (split_packet) {
- rte_prefetch0(&rx_pkts[pos]->cacheline1);
- rte_prefetch0(&rx_pkts[pos + 1]->cacheline1);
- rte_prefetch0(&rx_pkts[pos + 2]->cacheline1);
- rte_prefetch0(&rx_pkts[pos + 3]->cacheline1);
- }
-
- /* avoid compiler reorder optimization */
- rte_compiler_barrier();
-
- /* D.1 pkt 3,4 convert format from desc to pktmbuf */
- pkt_mb4 = _mm_shuffle_epi8(descs[3], shuf_msk);
- pkt_mb3 = _mm_shuffle_epi8(descs[2], shuf_msk);
-
- /* D.1 pkt 1,2 convert format from desc to pktmbuf */
- pkt_mb2 = _mm_shuffle_epi8(descs[1], shuf_msk);
- pkt_mb1 = _mm_shuffle_epi8(descs[0], shuf_msk);
-
- /* C.1 4=>2 filter staterr info only */
- sterr_tmp2 = _mm_unpackhi_epi32(descs[3], descs[2]);
- /* C.1 4=>2 filter staterr info only */
- sterr_tmp1 = _mm_unpackhi_epi32(descs[1], descs[0]);
-
- /* set ol_flags with vlan packet type */
- desc_to_olflags_v(descs, &rx_pkts[pos]);
-
- /* D.2 pkt 3,4 set in_port/nb_seg and remove crc */
- pkt_mb4 = _mm_add_epi16(pkt_mb4, crc_adjust);
- pkt_mb3 = _mm_add_epi16(pkt_mb3, crc_adjust);
-
- /* C.2 get 4 pkts staterr value */
- zero = _mm_xor_si128(dd_check, dd_check);
- staterr = _mm_unpacklo_epi32(sterr_tmp1, sterr_tmp2);
-
- /* D.3 copy final 3,4 data to rx_pkts */
- _mm_storeu_si128((void *)&rx_pkts[pos+3]->rx_descriptor_fields1,
- pkt_mb4);
- _mm_storeu_si128((void *)&rx_pkts[pos+2]->rx_descriptor_fields1,
- pkt_mb3);
-
- /* D.2 pkt 1,2 set in_port/nb_seg and remove crc */
- pkt_mb2 = _mm_add_epi16(pkt_mb2, crc_adjust);
- pkt_mb1 = _mm_add_epi16(pkt_mb1, crc_adjust);
-
- /* C* extract and record EOP bit */
- if (split_packet) {
- __m128i eop_shuf_mask = _mm_set_epi8(
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF,
- 0x04, 0x0C, 0x00, 0x08
- );
-
- /* and with mask to extract bits, flipping 1-0 */
- __m128i eop_bits = _mm_andnot_si128(staterr, eop_check);
- /* the staterr values are not in order, as the count
- * count of dd bits doesn't care. However, for end of
- * packet tracking, we do care, so shuffle. This also
- * compresses the 32-bit values to 8-bit */
- eop_bits = _mm_shuffle_epi8(eop_bits, eop_shuf_mask);
- /* store the resulting 32-bit value */
- *(int *)split_packet = _mm_cvtsi128_si32(eop_bits);
- split_packet += RTE_IXGBE_DESCS_PER_LOOP;
-
- /* zero-out next pointers */
- rx_pkts[pos]->next = NULL;
- rx_pkts[pos + 1]->next = NULL;
- rx_pkts[pos + 2]->next = NULL;
- rx_pkts[pos + 3]->next = NULL;
- }
-
- /* C.3 calc available number of desc */
- staterr = _mm_and_si128(staterr, dd_check);
- staterr = _mm_packs_epi32(staterr, zero);
-
- /* D.3 copy final 1,2 data to rx_pkts */
- _mm_storeu_si128((void *)&rx_pkts[pos+1]->rx_descriptor_fields1,
- pkt_mb2);
- _mm_storeu_si128((void *)&rx_pkts[pos]->rx_descriptor_fields1,
- pkt_mb1);
-
- /* C.4 calc avaialbe number of desc */
- var = __builtin_popcountll(_mm_cvtsi128_si64(staterr));
- nb_pkts_recd += var;
- if (likely(var != RTE_IXGBE_DESCS_PER_LOOP))
- break;
- }
-
- /* Update our internal tail pointer */
- rxq->rx_tail = (uint16_t)(rxq->rx_tail + nb_pkts_recd);
- rxq->rx_tail = (uint16_t)(rxq->rx_tail & (rxq->nb_rx_desc - 1));
- rxq->rxrearm_nb = (uint16_t)(rxq->rxrearm_nb + nb_pkts_recd);
-
- return nb_pkts_recd;
-}
+#include "ixgbe_rxtx_vec_sse.h"
/*
* vPMD receive routine, only accept(nb_pkts >= RTE_IXGBE_DESCS_PER_LOOP)
@@ -521,16 +164,6 @@ ixgbe_recv_scattered_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
}
static inline void
-vtx1(volatile union ixgbe_adv_tx_desc *txdp,
- struct rte_mbuf *pkt, uint64_t flags)
-{
- __m128i descriptor = _mm_set_epi64x((uint64_t)pkt->pkt_len << 46 |
- flags | pkt->data_len,
- pkt->buf_physaddr + pkt->data_off);
- _mm_store_si128((__m128i *)&txdp->read, descriptor);
-}
-
-static inline void
vtx(volatile union ixgbe_adv_tx_desc *txdp,
struct rte_mbuf **pkt, uint16_t nb_pkts, uint64_t flags)
{
diff --git a/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.h b/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.h
new file mode 100644
index 0000000..8f52778
--- /dev/null
+++ b/drivers/net/ixgbe/ixgbe_rxtx_vec_sse.h
@@ -0,0 +1,408 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <rte_ethdev.h>
+#include <rte_malloc.h>
+
+#include "ixgbe_ethdev.h"
+#include "ixgbe_rxtx.h"
+
+#include <tmmintrin.h>
+
+#ifndef __INTEL_COMPILER
+#pragma GCC diagnostic ignored "-Wcast-qual"
+#endif
+
+static inline void
+ixgbe_rxq_rearm(struct ixgbe_rx_queue *rxq)
+{
+ int i;
+ uint16_t rx_id;
+ volatile union ixgbe_adv_rx_desc *rxdp;
+ struct ixgbe_rx_entry *rxep = &rxq->sw_ring[rxq->rxrearm_start];
+ struct rte_mbuf *mb0, *mb1;
+ __m128i hdr_room = _mm_set_epi64x(RTE_PKTMBUF_HEADROOM,
+ RTE_PKTMBUF_HEADROOM);
+ __m128i dma_addr0, dma_addr1;
+
+ const __m128i hba_msk = _mm_set_epi64x(0, UINT64_MAX);
+
+ rxdp = rxq->rx_ring + rxq->rxrearm_start;
+
+ /* Pull 'n' more MBUFs into the software ring */
+ if (rte_mempool_get_bulk(rxq->mb_pool,
+ (void *)rxep,
+ RTE_IXGBE_RXQ_REARM_THRESH) < 0) {
+ if (rxq->rxrearm_nb + RTE_IXGBE_RXQ_REARM_THRESH >=
+ rxq->nb_rx_desc) {
+ dma_addr0 = _mm_setzero_si128();
+ for (i = 0; i < RTE_IXGBE_DESCS_PER_LOOP; i++) {
+ rxep[i].mbuf = &rxq->fake_mbuf;
+ _mm_store_si128((__m128i *)&rxdp[i].read,
+ dma_addr0);
+ }
+ }
+ rte_eth_devices[rxq->port_id].data->rx_mbuf_alloc_failed +=
+ RTE_IXGBE_RXQ_REARM_THRESH;
+ return;
+ }
+
+ /* Initialize the mbufs in vector, process 2 mbufs in one loop */
+ for (i = 0; i < RTE_IXGBE_RXQ_REARM_THRESH; i += 2, rxep += 2) {
+ __m128i vaddr0, vaddr1;
+ uintptr_t p0, p1;
+
+ mb0 = rxep[0].mbuf;
+ mb1 = rxep[1].mbuf;
+
+ /*
+ * Flush mbuf with pkt template.
+ * Data to be rearmed is 6 bytes long.
+ * Though, RX will overwrite ol_flags that are coming next
+ * anyway. So overwrite whole 8 bytes with one load:
+ * 6 bytes of rearm_data plus first 2 bytes of ol_flags.
+ */
+ p0 = (uintptr_t)&mb0->rearm_data;
+ *(uint64_t *)p0 = rxq->mbuf_initializer;
+ p1 = (uintptr_t)&mb1->rearm_data;
+ *(uint64_t *)p1 = rxq->mbuf_initializer;
+
+ /* load buf_addr(lo 64bit) and buf_physaddr(hi 64bit) */
+ vaddr0 = _mm_loadu_si128((__m128i *)&(mb0->buf_addr));
+ vaddr1 = _mm_loadu_si128((__m128i *)&(mb1->buf_addr));
+
+ /* convert pa to dma_addr hdr/data */
+ dma_addr0 = _mm_unpackhi_epi64(vaddr0, vaddr0);
+ dma_addr1 = _mm_unpackhi_epi64(vaddr1, vaddr1);
+
+ /* add headroom to pa values */
+ dma_addr0 = _mm_add_epi64(dma_addr0, hdr_room);
+ dma_addr1 = _mm_add_epi64(dma_addr1, hdr_room);
+
+ /* set Header Buffer Address to zero */
+ dma_addr0 = _mm_and_si128(dma_addr0, hba_msk);
+ dma_addr1 = _mm_and_si128(dma_addr1, hba_msk);
+
+ /* flush desc with pa dma_addr */
+ _mm_store_si128((__m128i *)&rxdp++->read, dma_addr0);
+ _mm_store_si128((__m128i *)&rxdp++->read, dma_addr1);
+ }
+
+ rxq->rxrearm_start += RTE_IXGBE_RXQ_REARM_THRESH;
+ if (rxq->rxrearm_start >= rxq->nb_rx_desc)
+ rxq->rxrearm_start = 0;
+
+ rxq->rxrearm_nb -= RTE_IXGBE_RXQ_REARM_THRESH;
+
+ rx_id = (uint16_t) ((rxq->rxrearm_start == 0) ?
+ (rxq->nb_rx_desc - 1) : (rxq->rxrearm_start - 1));
+
+ /* Update the tail pointer on the NIC */
+ IXGBE_PCI_REG_WRITE(rxq->rdt_reg_addr, rx_id);
+}
+
+/* Handling the offload flags (olflags) field takes computation
+ * time when receiving packets. Therefore we provide a flag to disable
+ * the processing of the olflags field when they are not needed. This
+ * gives improved performance, at the cost of losing the offload info
+ * in the received packet
+ */
+#ifdef RTE_IXGBE_RX_OLFLAGS_ENABLE
+
+#define VTAG_SHIFT (3)
+
+static inline void
+desc_to_olflags_v(__m128i descs[4], struct rte_mbuf **rx_pkts)
+{
+ __m128i ptype0, ptype1, vtag0, vtag1;
+ union {
+ uint16_t e[4];
+ uint64_t dword;
+ } vol;
+
+ /* pkt type + vlan olflags mask */
+ const __m128i pkttype_msk = _mm_set_epi16(
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ PKT_RX_VLAN_PKT, PKT_RX_VLAN_PKT, PKT_RX_VLAN_PKT, PKT_RX_VLAN_PKT);
+
+ /* mask everything except rss type */
+ const __m128i rsstype_msk = _mm_set_epi16(
+ 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x000F, 0x000F, 0x000F, 0x000F);
+
+ /* map rss type to rss hash flag */
+ const __m128i rss_flags = _mm_set_epi8(PKT_RX_FDIR, 0, 0, 0,
+ 0, 0, 0, PKT_RX_RSS_HASH,
+ PKT_RX_RSS_HASH, 0, PKT_RX_RSS_HASH, 0,
+ PKT_RX_RSS_HASH, PKT_RX_RSS_HASH, PKT_RX_RSS_HASH, 0);
+
+ ptype0 = _mm_unpacklo_epi16(descs[0], descs[1]);
+ ptype1 = _mm_unpacklo_epi16(descs[2], descs[3]);
+ vtag0 = _mm_unpackhi_epi16(descs[0], descs[1]);
+ vtag1 = _mm_unpackhi_epi16(descs[2], descs[3]);
+
+ ptype0 = _mm_unpacklo_epi32(ptype0, ptype1);
+ ptype0 = _mm_and_si128(ptype0, rsstype_msk);
+ ptype0 = _mm_shuffle_epi8(rss_flags, ptype0);
+
+ vtag1 = _mm_unpacklo_epi32(vtag0, vtag1);
+ vtag1 = _mm_srli_epi16(vtag1, VTAG_SHIFT);
+ vtag1 = _mm_and_si128(vtag1, pkttype_msk);
+
+ vtag1 = _mm_or_si128(ptype0, vtag1);
+ vol.dword = _mm_cvtsi128_si64(vtag1);
+
+ rx_pkts[0]->ol_flags = vol.e[0];
+ rx_pkts[1]->ol_flags = vol.e[1];
+ rx_pkts[2]->ol_flags = vol.e[2];
+ rx_pkts[3]->ol_flags = vol.e[3];
+}
+#else
+#define desc_to_olflags_v(desc, rx_pkts) do {} while (0)
+#endif
+
+/*
+ * vPMD raw receive routine, only accept(nb_pkts >= RTE_IXGBE_DESCS_PER_LOOP)
+ *
+ * Notice:
+ * - nb_pkts < RTE_IXGBE_DESCS_PER_LOOP, just return no packet
+ * - nb_pkts > RTE_IXGBE_MAX_RX_BURST, only scan RTE_IXGBE_MAX_RX_BURST
+ * numbers of DD bit
+ * - floor align nb_pkts to a RTE_IXGBE_DESC_PER_LOOP power-of-two
+ * - don't support ol_flags for rss and csum err
+ */
+static inline uint16_t
+_recv_raw_pkts_vec(struct ixgbe_rx_queue *rxq, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts, uint8_t *split_packet)
+{
+ volatile union ixgbe_adv_rx_desc *rxdp;
+ struct ixgbe_rx_entry *sw_ring;
+ uint16_t nb_pkts_recd;
+ int pos;
+ uint64_t var;
+ __m128i shuf_msk;
+ __m128i crc_adjust = _mm_set_epi16(
+ 0, 0, 0, /* ignore non-length fields */
+ -rxq->crc_len, /* sub crc on data_len */
+ 0, /* ignore high-16bits of pkt_len */
+ -rxq->crc_len, /* sub crc on pkt_len */
+ 0, 0 /* ignore pkt_type field */
+ );
+ __m128i dd_check, eop_check;
+
+ /* nb_pkts shall be less equal than RTE_IXGBE_MAX_RX_BURST */
+ nb_pkts = RTE_MIN(nb_pkts, RTE_IXGBE_MAX_RX_BURST);
+
+ /* nb_pkts has to be floor-aligned to RTE_IXGBE_DESCS_PER_LOOP */
+ nb_pkts = RTE_ALIGN_FLOOR(nb_pkts, RTE_IXGBE_DESCS_PER_LOOP);
+
+ /* Just the act of getting into the function from the application is
+ * going to cost about 7 cycles */
+ rxdp = rxq->rx_ring + rxq->rx_tail;
+
+ _mm_prefetch((const void *)rxdp, _MM_HINT_T0);
+
+ /* See if we need to rearm the RX queue - gives the prefetch a bit
+ * of time to act */
+ if (rxq->rxrearm_nb > RTE_IXGBE_RXQ_REARM_THRESH)
+ ixgbe_rxq_rearm(rxq);
+
+ /* Before we start moving massive data around, check to see if
+ * there is actually a packet available */
+ if (!(rxdp->wb.upper.status_error &
+ rte_cpu_to_le_32(IXGBE_RXDADV_STAT_DD)))
+ return 0;
+
+ /* 4 packets DD mask */
+ dd_check = _mm_set_epi64x(0x0000000100000001LL, 0x0000000100000001LL);
+
+ /* 4 packets EOP mask */
+ eop_check = _mm_set_epi64x(0x0000000200000002LL, 0x0000000200000002LL);
+
+ /* mask to shuffle from desc. to mbuf */
+ shuf_msk = _mm_set_epi8(
+ 7, 6, 5, 4, /* octet 4~7, 32bits rss */
+ 15, 14, /* octet 14~15, low 16 bits vlan_macip */
+ 13, 12, /* octet 12~13, 16 bits data_len */
+ 0xFF, 0xFF, /* skip high 16 bits pkt_len, zero out */
+ 13, 12, /* octet 12~13, low 16 bits pkt_len */
+ 0xFF, 0xFF, /* skip 32 bit pkt_type */
+ 0xFF, 0xFF
+ );
+
+ /* Cache is empty -> need to scan the buffer rings, but first move
+ * the next 'n' mbufs into the cache */
+ sw_ring = &rxq->sw_ring[rxq->rx_tail];
+
+ /* A. load 4 packet in one loop
+ * [A*. mask out 4 unused dirty field in desc]
+ * B. copy 4 mbuf point from swring to rx_pkts
+ * C. calc the number of DD bits among the 4 packets
+ * [C*. extract the end-of-packet bit, if requested]
+ * D. fill info. from desc to mbuf
+ */
+ for (pos = 0, nb_pkts_recd = 0; pos < nb_pkts;
+ pos += RTE_IXGBE_DESCS_PER_LOOP,
+ rxdp += RTE_IXGBE_DESCS_PER_LOOP) {
+ __m128i descs[RTE_IXGBE_DESCS_PER_LOOP];
+ __m128i pkt_mb1, pkt_mb2, pkt_mb3, pkt_mb4;
+ __m128i zero, staterr, sterr_tmp1, sterr_tmp2;
+ __m128i mbp1, mbp2; /* two mbuf pointer in one XMM reg. */
+
+ /* B.1 load 1 mbuf point */
+ mbp1 = _mm_loadu_si128((__m128i *)&sw_ring[pos]);
+
+ /* Read desc statuses backwards to avoid race condition */
+ /* A.1 load 4 pkts desc */
+ descs[3] = _mm_loadu_si128((__m128i *)(rxdp + 3));
+
+ /* B.2 copy 2 mbuf point into rx_pkts */
+ _mm_storeu_si128((__m128i *)&rx_pkts[pos], mbp1);
+
+ /* B.1 load 1 mbuf point */
+ mbp2 = _mm_loadu_si128((__m128i *)&sw_ring[pos+2]);
+
+ descs[2] = _mm_loadu_si128((__m128i *)(rxdp + 2));
+ /* B.1 load 2 mbuf point */
+ descs[1] = _mm_loadu_si128((__m128i *)(rxdp + 1));
+ descs[0] = _mm_loadu_si128((__m128i *)(rxdp));
+
+ /* B.2 copy 2 mbuf point into rx_pkts */
+ _mm_storeu_si128((__m128i *)&rx_pkts[pos+2], mbp2);
+
+ if (split_packet) {
+ rte_prefetch0(&rx_pkts[pos]->cacheline1);
+ rte_prefetch0(&rx_pkts[pos + 1]->cacheline1);
+ rte_prefetch0(&rx_pkts[pos + 2]->cacheline1);
+ rte_prefetch0(&rx_pkts[pos + 3]->cacheline1);
+ }
+
+ /* avoid compiler reorder optimization */
+ rte_compiler_barrier();
+
+ /* D.1 pkt 3,4 convert format from desc to pktmbuf */
+ pkt_mb4 = _mm_shuffle_epi8(descs[3], shuf_msk);
+ pkt_mb3 = _mm_shuffle_epi8(descs[2], shuf_msk);
+
+ /* D.1 pkt 1,2 convert format from desc to pktmbuf */
+ pkt_mb2 = _mm_shuffle_epi8(descs[1], shuf_msk);
+ pkt_mb1 = _mm_shuffle_epi8(descs[0], shuf_msk);
+
+ /* C.1 4=>2 filter staterr info only */
+ sterr_tmp2 = _mm_unpackhi_epi32(descs[3], descs[2]);
+ /* C.1 4=>2 filter staterr info only */
+ sterr_tmp1 = _mm_unpackhi_epi32(descs[1], descs[0]);
+
+ /* set ol_flags with vlan packet type */
+ desc_to_olflags_v(descs, &rx_pkts[pos]);
+
+ /* D.2 pkt 3,4 set in_port/nb_seg and remove crc */
+ pkt_mb4 = _mm_add_epi16(pkt_mb4, crc_adjust);
+ pkt_mb3 = _mm_add_epi16(pkt_mb3, crc_adjust);
+
+ /* C.2 get 4 pkts staterr value */
+ zero = _mm_xor_si128(dd_check, dd_check);
+ staterr = _mm_unpacklo_epi32(sterr_tmp1, sterr_tmp2);
+
+ /* D.3 copy final 3,4 data to rx_pkts */
+ _mm_storeu_si128((void *)&rx_pkts[pos+3]->rx_descriptor_fields1,
+ pkt_mb4);
+ _mm_storeu_si128((void *)&rx_pkts[pos+2]->rx_descriptor_fields1,
+ pkt_mb3);
+
+ /* D.2 pkt 1,2 set in_port/nb_seg and remove crc */
+ pkt_mb2 = _mm_add_epi16(pkt_mb2, crc_adjust);
+ pkt_mb1 = _mm_add_epi16(pkt_mb1, crc_adjust);
+
+ /* C* extract and record EOP bit */
+ if (split_packet) {
+ __m128i eop_shuf_mask = _mm_set_epi8(
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0x04, 0x0C, 0x00, 0x08
+ );
+
+ /* and with mask to extract bits, flipping 1-0 */
+ __m128i eop_bits = _mm_andnot_si128(staterr, eop_check);
+ /* the staterr values are not in order, as the count
+ * count of dd bits doesn't care. However, for end of
+ * packet tracking, we do care, so shuffle. This also
+ * compresses the 32-bit values to 8-bit */
+ eop_bits = _mm_shuffle_epi8(eop_bits, eop_shuf_mask);
+ /* store the resulting 32-bit value */
+ *(int *)split_packet = _mm_cvtsi128_si32(eop_bits);
+ split_packet += RTE_IXGBE_DESCS_PER_LOOP;
+
+ /* zero-out next pointers */
+ rx_pkts[pos]->next = NULL;
+ rx_pkts[pos + 1]->next = NULL;
+ rx_pkts[pos + 2]->next = NULL;
+ rx_pkts[pos + 3]->next = NULL;
+ }
+
+ /* C.3 calc available number of desc */
+ staterr = _mm_and_si128(staterr, dd_check);
+ staterr = _mm_packs_epi32(staterr, zero);
+
+ /* D.3 copy final 1,2 data to rx_pkts */
+ _mm_storeu_si128((void *)&rx_pkts[pos+1]->rx_descriptor_fields1,
+ pkt_mb2);
+ _mm_storeu_si128((void *)&rx_pkts[pos]->rx_descriptor_fields1,
+ pkt_mb1);
+
+ /* C.4 calc avaialbe number of desc */
+ var = __builtin_popcountll(_mm_cvtsi128_si64(staterr));
+ nb_pkts_recd += var;
+ if (likely(var != RTE_IXGBE_DESCS_PER_LOOP))
+ break;
+ }
+
+ /* Update our internal tail pointer */
+ rxq->rx_tail = (uint16_t)(rxq->rx_tail + nb_pkts_recd);
+ rxq->rx_tail = (uint16_t)(rxq->rx_tail & (rxq->nb_rx_desc - 1));
+ rxq->rxrearm_nb = (uint16_t)(rxq->rxrearm_nb + nb_pkts_recd);
+
+ return nb_pkts_recd;
+}
+
+static inline void
+vtx1(volatile union ixgbe_adv_tx_desc *txdp,
+ struct rte_mbuf *pkt, uint64_t flags)
+{
+ __m128i descriptor = _mm_set_epi64x((uint64_t)pkt->pkt_len << 46 |
+ flags | pkt->data_len,
+ pkt->buf_physaddr + pkt->data_off);
+ _mm_store_si128((__m128i *)&txdp->read, descriptor);
+}
--
1.8.3.1
next reply other threads:[~2016-04-20 13:45 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-20 13:44 Jianbo Liu [this message]
2016-04-20 13:45 ` [dpdk-dev] [PATCH 2/4] ixgbe: implement vector PMD for arm architecture Jianbo Liu
2016-04-20 13:45 ` [dpdk-dev] [PATCH 3/4] ixgbe: enable ixgbe vector PMD on ARMv8a platform Jianbo Liu
2016-04-20 13:45 ` [dpdk-dev] [PATCH 4/4] maintainers: claim responsibility for ixgbe vector PMD on ARM Jianbo Liu
2016-04-25 16:35 ` [dpdk-dev] [PATCH 1/4] ixgbe: rearrange vector PMD code for x86 Bruce Richardson
2016-04-26 8:23 ` Jianbo Liu
2016-04-26 13:50 ` [dpdk-dev] [PATCH v2 " Jianbo Liu
2016-05-03 5:51 ` Jianbo Liu
2016-05-03 16:29 ` Bruce Richardson
2016-04-26 13:55 ` [dpdk-dev] [PATCH v2 2/4] ixgbe: implement vector PMD for arm architecture Jianbo Liu
2016-04-26 13:55 ` [dpdk-dev] [PATCH v2 3/4] ixgbe: enable ixgbe vector PMD on ARMv8a platform Jianbo Liu
2016-04-26 13:55 ` [dpdk-dev] [PATCH v2 4/4] maintainers: claim responsibility for ixgbe vector PMD on ARM Jianbo Liu
2016-05-06 6:25 ` [dpdk-dev] [PATCH v3 0/4] ixgbe: enable " Jianbo Liu
2016-05-06 6:25 ` [dpdk-dev] [PATCH v3 1/4] ixgbe: rearrange vector PMD code for x86 Jianbo Liu
2016-05-06 6:25 ` [dpdk-dev] [PATCH v3 2/4] ixgbe: implement vector PMD for arm architecture Jianbo Liu
2016-05-10 14:49 ` Bruce Richardson
2016-05-11 2:40 ` Jianbo Liu
2016-05-25 12:29 ` Jerin Jacob
2016-05-25 12:53 ` Bruce Richardson
2016-05-26 1:37 ` Jianbo Liu
2016-05-06 6:25 ` [dpdk-dev] [PATCH v3 3/4] ixgbe: enable ixgbe vector PMD on ARMv8a platform Jianbo Liu
2016-05-06 6:25 ` [dpdk-dev] [PATCH v3 4/4] maintainers: claim responsibility for ixgbe vector PMD on ARM Jianbo Liu
2016-05-24 16:10 ` [dpdk-dev] [PATCH v3 0/4] ixgbe: enable " Bruce Richardson
2016-05-24 16:12 ` Bruce Richardson
2016-05-27 10:44 ` Jianbo Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461159902-16680-1-git-send-email-jianbo.liu@linaro.org \
--to=jianbo.liu@linaro.org \
--cc=dev@dpdk.org \
--cc=helin.zhang@intel.com \
--cc=jerin.jacob@caviumnetworks.com \
--cc=konstantin.ananyev@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).