From: Stephen Hurd <stephen.hurd@broadcom.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 03/40] bnxt: add driver register/unregister support
Date: Fri, 6 May 2016 12:25:43 -0700 [thread overview]
Message-ID: <1462562780-47991-3-git-send-email-stephen.hurd@broadcom.com> (raw)
In-Reply-To: <1462562780-47991-1-git-send-email-stephen.hurd@broadcom.com>
Move init() cleanup into uninit() function
Fix .dev_private_size
Add require hwrm calls:
bnxt_hwrm_func_driver_register()
bnxt_hwrm_func_driver_unregister()
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt.h | 1 +
drivers/net/bnxt/bnxt_ethdev.c | 48 ++++--
drivers/net/bnxt/bnxt_hwrm.c | 50 ++++++
drivers/net/bnxt/bnxt_hwrm.h | 3 +
drivers/net/bnxt/hsi_struct_def_dpdk.h | 277 ++++++++++++++++++++++++++++++++-
5 files changed, 359 insertions(+), 20 deletions(-)
diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h
index 0f816ed..ebddeab 100644
--- a/drivers/net/bnxt/bnxt.h
+++ b/drivers/net/bnxt/bnxt.h
@@ -91,6 +91,7 @@ struct bnxt {
struct rte_pci_device *pdev;
uint32_t flags;
+#define BNXT_FLAG_REGISTERED (1<<0)
#define BNXT_FLAG_VF (1<<1)
#define BNXT_PF(bp) (!((bp)->flags & BNXT_FLAG_VF))
#define BNXT_VF(bp) ((bp)->flags & BNXT_FLAG_VF)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index a74cc6c..07519df 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -52,20 +52,12 @@ static struct rte_pci_id bnxt_pci_id_map[] = {
{.device_id = 0},
};
-static void bnxt_dev_close_op(struct rte_eth_dev *eth_dev)
-{
- struct bnxt *bp = (struct bnxt *)eth_dev->data->dev_private;
-
- rte_free(eth_dev->data->mac_addrs);
- bnxt_free_hwrm_resources(bp);
-}
-
/*
* Initialization
*/
static struct eth_dev_ops bnxt_dev_ops = {
- .dev_close = bnxt_dev_close_op,
+0
};
static bool bnxt_vf_pciid(uint16_t id)
@@ -123,7 +115,8 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
eth_dev->pci_dev->addr.function < 4) {
RTE_LOG(ERR, PMD, "Function not enabled %x:\n",
eth_dev->pci_dev->addr.function);
- return -ENOMEM;
+ rc = -ENOMEM;
+ goto error;
}
rte_eth_copy_pci_info(eth_dev, eth_dev->pci_dev);
@@ -148,11 +141,11 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
if (rc) {
RTE_LOG(ERR, PMD,
"hwrm resource allocation failure rc: %x\n", rc);
- goto error;
+ goto error_free;
}
rc = bnxt_hwrm_ver_get(bp);
if (rc)
- goto error;
+ goto error_free;
bnxt_hwrm_queue_qportcfg(bp);
/* Get the MAX capabilities for this function */
@@ -177,17 +170,38 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
memcpy(bp->mac_addr, bp->vf.mac_addr, sizeof(bp->mac_addr));
memcpy(ð_dev->data->mac_addrs[0], bp->mac_addr, ETHER_ADDR_LEN);
- return -EPERM;
+ rc = bnxt_hwrm_func_driver_register(bp, 0,
+ bp->pf.vf_req_fwd);
+ if (rc) {
+ RTE_LOG(ERR, PMD,
+ "Failed to register driver");
+ rc = -EBUSY;
+ goto error_free;
+ }
+
+ RTE_LOG(INFO, PMD,
+ DRV_MODULE_NAME " found at mem %" PRIx64 ", node addr %pM\n",
+ eth_dev->pci_dev->mem_resource[0].phys_addr,
+ eth_dev->pci_dev->mem_resource[0].addr);
+
+ return 0;
error_free:
- bnxt_dev_close_op(eth_dev);
+ eth_dev->driver->eth_dev_uninit(eth_dev);
error:
return rc;
}
static int
-bnxt_dev_uninit(struct rte_eth_dev *eth_dev __rte_unused) {
- return 0;
+bnxt_dev_uninit(struct rte_eth_dev *eth_dev) {
+ struct bnxt *bp = eth_dev->data->dev_private;
+ int rc;
+
+ if (eth_dev->data->mac_addrs)
+ rte_free(eth_dev->data->mac_addrs);
+ rc = bnxt_hwrm_func_driver_unregister(bp, 0);
+ bnxt_free_hwrm_resources(bp);
+ return rc;
}
static struct eth_driver bnxt_rte_pmd = {
@@ -198,7 +212,7 @@ static struct eth_driver bnxt_rte_pmd = {
},
.eth_dev_init = bnxt_dev_init,
.eth_dev_uninit = bnxt_dev_uninit,
- .dev_private_size = 32 /* this must be non-zero apparently */,
+ .dev_private_size = sizeof(struct bnxt),
};
static int bnxt_rte_pmd_init(const char *name, const char *params __rte_unused)
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 5b66721..398f0f5 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -36,6 +36,7 @@
#include <rte_cycles.h>
#include <rte_malloc.h>
#include <rte_memzone.h>
+#include <rte_version.h>
#include "bnxt.h"
#include "bnxt_hwrm.h"
@@ -178,6 +179,34 @@ int bnxt_hwrm_func_qcaps(struct bnxt *bp)
return rc;
}
+int bnxt_hwrm_func_driver_register(struct bnxt *bp, uint32_t flags,
+ uint32_t *vf_req_fwd)
+{
+ int rc;
+ struct hwrm_func_drv_rgtr_input req = {.req_type = 0 };
+ struct hwrm_func_drv_rgtr_output *resp = bp->hwrm_cmd_resp_addr;
+
+ if (bp->flags & BNXT_FLAG_REGISTERED)
+ return 0;
+
+ HWRM_PREP(req, FUNC_DRV_RGTR, -1, resp);
+ req.flags = flags;
+ req.enables = HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER;
+ req.ver_maj = RTE_VER_YEAR;
+ req.ver_min = RTE_VER_MONTH;
+ req.ver_upd = RTE_VER_MINOR;
+
+ memcpy(req.vf_req_fwd, vf_req_fwd, sizeof(req.vf_req_fwd));
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ HWRM_CHECK_RESULT;
+
+ bp->flags |= BNXT_FLAG_REGISTERED;
+
+ return rc;
+}
+
int bnxt_hwrm_ver_get(struct bnxt *bp)
{
int rc = 0;
@@ -264,6 +293,27 @@ error:
return rc;
}
+int bnxt_hwrm_func_driver_unregister(struct bnxt *bp, uint32_t flags)
+{
+ int rc;
+ struct hwrm_func_drv_unrgtr_input req = {.req_type = 0 };
+ struct hwrm_func_drv_unrgtr_output *resp = bp->hwrm_cmd_resp_addr;
+
+ if (!(bp->flags & BNXT_FLAG_REGISTERED))
+ return 0;
+
+ HWRM_PREP(req, FUNC_DRV_UNRGTR, -1, resp);
+ req.flags = flags;
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ HWRM_CHECK_RESULT;
+
+ bp->flags &= ~BNXT_FLAG_REGISTERED;
+
+ return rc;
+}
+
int bnxt_hwrm_queue_qportcfg(struct bnxt *bp)
{
int rc = 0;
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index e35e8c0..6f2e445 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -41,7 +41,10 @@
#define HWRM_SEQ_ID_INVALID -1U
+int bnxt_hwrm_func_driver_register(struct bnxt *bp, uint32_t flags,
+ uint32_t *vf_req_fwd);
int bnxt_hwrm_func_qcaps(struct bnxt *bp);
+int bnxt_hwrm_func_driver_unregister(struct bnxt *bp, uint32_t flags);
int bnxt_hwrm_queue_qportcfg(struct bnxt *bp);
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index 1667927..be3ed0f 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -50,9 +50,11 @@
/*
* Request types
*/
-#define HWRM_VER_GET (UINT32_C(0x0))
-#define HWRM_FUNC_QCAPS (UINT32_C(0x15))
-#define HWRM_QUEUE_QPORTCFG (UINT32_C(0x30))
+#define HWRM_VER_GET (UINT32_C(0x0))
+#define HWRM_FUNC_QCAPS (UINT32_C(0x15))
+#define HWRM_FUNC_DRV_UNRGTR (UINT32_C(0x1a))
+#define HWRM_FUNC_DRV_RGTR (UINT32_C(0x1d))
+#define HWRM_QUEUE_QPORTCFG (UINT32_C(0x30))
/*
* Note: The Hardware Resource Manager (HWRM) manages various hardware resources
@@ -951,4 +953,273 @@ struct hwrm_queue_qportcfg_output {
uint8_t valid;
} __attribute__((packed));
+/* hwrm_func_drv_rgtr */
+/*
+ * Description: This command is used by the function driver to register its
+ * information with the HWRM. A function driver shall implement this command. A
+ * function driver shall use this command during the driver initialization right
+ * after the HWRM version discovery and default ring resources allocation.
+ */
+
+/* Input (80 bytes) */
+struct hwrm_func_drv_rgtr_input {
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t req_type;
+
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t cmpl_ring;
+
+ /* This value indicates the command sequence number. */
+ uint16_t seq_id;
+
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t resp_addr;
+
+ /*
+ * When this bit is '1', the function driver is requesting all requests
+ * from its children VF drivers to be forwarded to itself. This flag can
+ * only be set by the PF driver. If a VF driver sets this flag, it
+ * should be ignored by the HWRM.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_ALL_MODE UINT32_C(0x1)
+ /*
+ * When this bit is '1', the function is requesting none of the requests
+ * from its children VF drivers to be forwarded to itself. This flag can
+ * only be set by the PF driver. If a VF driver sets this flag, it
+ * should be ignored by the HWRM.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_NONE_MODE UINT32_C(0x2)
+ uint32_t flags;
+
+ /* This bit must be '1' for the os_type field to be configured. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_OS_TYPE UINT32_C(0x1)
+ /* This bit must be '1' for the ver field to be configured. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER UINT32_C(0x2)
+ /* This bit must be '1' for the timestamp field to be configured. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_TIMESTAMP UINT32_C(0x4)
+ /* This bit must be '1' for the vf_req_fwd field to be configured. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VF_REQ_FWD UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the async_event_fwd field to be configured.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_ASYNC_EVENT_FWD \
+ UINT32_C(0x10)
+ uint32_t enables;
+
+ /* This value indicates the type of OS. */
+ /* Unknown */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UNKNOWN \
+ (UINT32_C(0x0) << 0)
+ /* Other OS not listed below. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_OTHER \
+ (UINT32_C(0x1) << 0)
+ /* MSDOS OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_MSDOS \
+ (UINT32_C(0xe) << 0)
+ /* Windows OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WINDOWS \
+ (UINT32_C(0x12) << 0)
+ /* Solaris OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_SOLARIS \
+ (UINT32_C(0x1d) << 0)
+ /* Linux OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_LINUX \
+ (UINT32_C(0x24) << 0)
+ /* FreeBSD OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_FREEBSD \
+ (UINT32_C(0x2a) << 0)
+ /* VMware ESXi OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_ESXI \
+ (UINT32_C(0x68) << 0)
+ /* Microsoft Windows 8 64-bit OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN864 \
+ (UINT32_C(0x73) << 0)
+ /* Microsoft Windows Server 2012 R2 OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN2012R2 \
+ (UINT32_C(0x74) << 0)
+ uint16_t os_type;
+
+ /* This is the major version of the driver. */
+ uint8_t ver_maj;
+
+ /* This is the minor version of the driver. */
+ uint8_t ver_min;
+
+ /* This is the update version of the driver. */
+ uint8_t ver_upd;
+
+ uint8_t unused_0;
+ uint16_t unused_1;
+
+ /*
+ * This is a 32-bit timestamp provided by the driver for keep alive. The
+ * timestamp is in multiples of 1ms.
+ */
+ uint32_t timestamp;
+
+ uint32_t unused_2;
+
+ /*
+ * This is a 256-bit bit mask provided by the PF driver for letting the
+ * HWRM know what commands issued by the VF driver to the HWRM should be
+ * forwarded to the PF driver. Nth bit refers to the Nth req_type.
+ * Setting Nth bit to 1 indicates that requests from the VF driver with
+ * req_type equal to N shall be forwarded to the parent PF driver. This
+ * field is not valid for the VF driver.
+ */
+ uint32_t vf_req_fwd[8];
+
+ /*
+ * This is a 256-bit bit mask provided by the function driver (PF or VF
+ * driver) to indicate the list of asynchronous event completions to be
+ * forwarded. Nth bit refers to the Nth event_id. Setting Nth bit to 1
+ * by the function driver shall result in the HWRM forwarding
+ * asynchronous event completion with event_id equal to N. If all bits
+ * are set to 0 (value of 0), then the HWRM shall not forward any
+ * asynchronous event completion to this function driver.
+ */
+ uint32_t async_event_fwd[8];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_func_drv_rgtr_output {
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t error_code;
+
+ /* This field returns the type of original request. */
+ uint16_t req_type;
+
+ /* This field provides original sequence number of the command. */
+ uint16_t seq_id;
+
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t resp_len;
+
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/* hwrm_func_drv_unrgtr */
+/*
+ * Description: This command is used by the function driver to un register with
+ * the HWRM. A function driver shall implement this command. A function driver
+ * shall use this command during the driver unloading.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_func_drv_unrgtr_input {
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t req_type;
+
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t cmpl_ring;
+
+ /* This value indicates the command sequence number. */
+ uint16_t seq_id;
+
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t resp_addr;
+
+ /*
+ * When this bit is '1', the function driver is notifying the HWRM to
+ * prepare for the shutdown.
+ */
+ #define HWRM_FUNC_DRV_UNRGTR_INPUT_FLAGS_PREPARE_FOR_SHUTDOWN \
+ UINT32_C(0x1)
+ uint32_t flags;
+
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_func_drv_unrgtr_output {
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t error_code;
+
+ /* This field returns the type of original request. */
+ uint16_t req_type;
+
+ /* This field provides original sequence number of the command. */
+ uint16_t seq_id;
+
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t resp_len;
+
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
#endif
--
1.9.1
next prev parent reply other threads:[~2016-05-06 19:26 UTC|newest]
Thread overview: 142+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-02 21:36 [dpdk-dev] [PATCH] drivers/net/bnxt New driver for Broadcom bnxt Stephen Hurd
2016-03-02 21:44 ` Stephen Hemminger
2016-03-02 21:58 ` Thomas Monjalon
2016-03-03 4:08 ` [dpdk-dev] [PATCH 0/7] drivers/net/bnxt: new Broadcom bnxt driver Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 1/7] lib/librte_ether: Add 2/2.5/25/50Gbps link speeds Stephen Hurd
2016-03-03 7:53 ` Simon Kågström
2016-03-03 9:28 ` Thomas Monjalon
2016-03-03 10:22 ` Simon Kågström
2016-03-03 4:08 ` [dpdk-dev] [PATCH 2/7] lib/librte_eal: Add PCI IDs for Broadcom bnxt Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 3/7] drivers/net/bnxt new driver " Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 4/7] maintainers: claim drivers/net/bnxt Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 5/7] build: add bnxt PMD to build Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 6/7] doc: Add bnxt to overview table Stephen Hurd
2016-03-03 4:08 ` [dpdk-dev] [PATCH 7/7] doc: add guide for new bnxt driver Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 0/7] drivers/net/bnxt: new Broadcom " Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 1/7] lib/librte_ether: Add 2/2.5/25/50Gbps link speeds Stephen Hurd
2016-04-19 12:41 ` Bruce Richardson
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 2/7] lib/librte_eal: Add PCI IDs for Broadcom bnxt Stephen Hurd
2016-04-19 13:01 ` Bruce Richardson
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 3/7] drivers/net/bnxt new driver " Stephen Hurd
2016-03-04 23:02 ` Stephen Hemminger
2016-03-04 23:58 ` Stephen Hurd
2016-04-19 14:19 ` Bruce Richardson
2016-04-19 20:51 ` Stephen Hurd
2016-04-20 11:01 ` Bruce Richardson
2016-04-20 21:32 ` Stephen Hurd
2016-04-21 10:00 ` Bruce Richardson
2016-04-21 10:11 ` Thomas Monjalon
2016-05-06 19:25 ` [dpdk-dev] [PATCH 01/40] bnxt: new driver for Broadcom NetXtreme-C devices Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 02/40] bnxt: add HWRM init code Stephen Hurd
2016-05-06 19:25 ` Stephen Hurd [this message]
2016-05-06 19:25 ` [dpdk-dev] [PATCH 04/40] bnxt: add dev infos get operation Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 05/40] bnxt: add dev configure operation Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 06/40] bnxt: add vnic functions and structs Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 07/40] bnxt: declare ring structs and free() func Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 08/40] bnxt: add completion ring support Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 09/40] bnxt: add L2 filter alloc/init/free Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 10/40] bnxt: add Tx queue operations (nonfunctional) Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 11/40] bnxt: add Rx queue create/destroy operations Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 12/40] bnxt: statistics operations Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 13/40] bnxt: initial Tx ring code Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 14/40] bnxt: initial Rx " Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 15/40] bnxt: alloc/free ring information Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 16/40] bnxt: add HWRM function reset command Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 17/40] bnxt: add HWRM vnic alloc function Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 18/40] bnxt: add HWRM vnic free function Stephen Hurd
2016-05-06 19:25 ` [dpdk-dev] [PATCH 19/40] bnxt: add HWRM vnic cfg function Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 20/40] bnxt: add vnic RSS cos lb cTx alloc/free functions Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 21/40] bnxt: add HWRM vnic RSS config function Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 22/40] bnxt: add L2 Rx mask set/clear functions Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 23/40] bnxt: add HWRM stats context allocation Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 24/40] bnxt: add HWRM ring alloc/free functions Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 25/40] bnxt: add ring group " Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 26/40] bnxt: add HWRM stat context free function Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 27/40] bnxt: add struct forward decl Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 28/40] bnxt: add ring allocation and group init Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 29/40] bnxt: work around HWRM error when creating rings Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 30/40] bnxt: add HWRM port phy qcfg call and wrapper Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 31/40] bnxt: add start/stop/link update operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 32/40] bnxt: add promiscuous enable/disable operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 33/40] bnxt: add all multicast " Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 34/40] bnxt: add device close operation Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 35/40] bnxt: add MAC address add/remove operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 36/40] bnxt: add dev set link up/down operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 37/40] bnxt: add reta update/query operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 38/40] bnxt: add RSS device operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 39/40] bnxt: add flow control operations Stephen Hurd
2016-05-06 19:26 ` [dpdk-dev] [PATCH 40/40] bnxt: cleanup null pointer checks Stephen Hurd
2016-05-11 4:53 ` [dpdk-dev] [PATCH 01/40] bnxt: new driver for Broadcom NetXtreme-C devices Panu Matilainen
2016-05-11 20:59 ` Stephen Hurd
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 " Stephen Hurd
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 02/40] bnxt: add HWRM init code Stephen Hurd
2016-05-25 15:05 ` Bruce Richardson
2016-05-25 23:35 ` Stephen Hurd
2016-05-26 9:01 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 03/40] bnxt: add driver register/unregister support Stephen Hurd
2016-05-25 15:11 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 04/40] bnxt: add dev infos get operation Stephen Hurd
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 05/40] bnxt: add dev configure operation Stephen Hurd
2016-05-25 15:25 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 06/40] bnxt: add vnic functions and structs Stephen Hurd
2016-05-25 16:14 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 07/40] bnxt: declare ring structs and free() func Stephen Hurd
2016-05-25 16:37 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 08/40] bnxt: add completion ring support Stephen Hurd
2016-05-25 17:33 ` Bruce Richardson
2016-05-26 9:38 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 09/40] bnxt: add L2 filter alloc/init/free Stephen Hurd
2016-05-25 17:51 ` Bruce Richardson
2016-05-13 22:45 ` [dpdk-dev] [PATCH v2 10/40] bnxt: add Tx queue operations (nonfunctional) Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 11/40] bnxt: add Rx queue create/destroy operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 12/40] bnxt: statistics operations Stephen Hurd
2016-05-26 9:40 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 13/40] bnxt: initial Tx ring code Stephen Hurd
2016-05-26 10:40 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 14/40] bnxt: initial Rx " Stephen Hurd
2016-05-26 10:52 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 15/40] bnxt: alloc/free ring information Stephen Hurd
2016-05-26 10:59 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 16/40] bnxt: add HWRM function reset command Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 17/40] bnxt: add HWRM vnic alloc function Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 18/40] bnxt: add HWRM vnic free function Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 19/40] bnxt: add HWRM vnic cfg function Stephen Hurd
2016-05-26 12:04 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 20/40] bnxt: add vnic RSS cos lb cTx alloc/free functions Stephen Hurd
2016-05-26 12:06 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 21/40] bnxt: add HWRM vnic RSS config function Stephen Hurd
2016-05-26 12:14 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 22/40] bnxt: add L2 Rx mask set/clear functions Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 23/40] bnxt: add HWRM stats context allocation Stephen Hurd
2016-05-26 12:23 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 24/40] bnxt: add HWRM ring alloc/free functions Stephen Hurd
2016-05-26 12:45 ` Bruce Richardson
2016-05-26 13:19 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 25/40] bnxt: add ring group " Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 26/40] bnxt: add HWRM stat context free function Stephen Hurd
2016-05-26 13:15 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 27/40] bnxt: add struct forward decl Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 28/40] bnxt: add ring allocation and group init Stephen Hurd
2016-05-26 13:24 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 29/40] bnxt: work around HWRM error when creating rings Stephen Hurd
2016-05-26 13:25 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 30/40] bnxt: add HWRM port phy qcfg call and wrapper Stephen Hurd
2016-05-26 13:39 ` Bruce Richardson
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 31/40] bnxt: add start/stop/link update operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 32/40] bnxt: add promiscuous enable/disable operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 33/40] bnxt: add all multicast " Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 34/40] bnxt: add device close operation Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 35/40] bnxt: add MAC address add/remove operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 36/40] bnxt: add dev set link up/down operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 37/40] bnxt: add reta update/query operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 38/40] bnxt: add RSS device operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 39/40] bnxt: add flow control operations Stephen Hurd
2016-05-13 22:46 ` [dpdk-dev] [PATCH v2 40/40] bnxt: cleanup null pointer checks Stephen Hurd
2016-05-26 15:20 ` Bruce Richardson
2016-05-25 15:02 ` [dpdk-dev] [PATCH v2 01/40] bnxt: new driver for Broadcom NetXtreme-C devices Bruce Richardson
2016-05-25 20:59 ` Stephen Hurd
2016-05-26 9:05 ` Bruce Richardson
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 4/7] maintainers: claim drivers/net/bnxt Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 5/7] build: add bnxt PMD to build Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 6/7] doc: Add bnxt to overview table Stephen Hurd
2016-03-04 21:05 ` [dpdk-dev] [PATCH v3 7/7] doc: add guide for new bnxt driver Stephen Hurd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462562780-47991-3-git-send-email-stephen.hurd@broadcom.com \
--to=stephen.hurd@broadcom.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).