From: Stephen Hurd <stephen.hurd@broadcom.com>
To: dev@dpdk.org, ajit.khaparde@broadcom.com, bruce.richardson@intel.com
Subject: [dpdk-dev] [PATCH v4 17/39] bnxt: add HWRM vnic alloc function
Date: Mon, 6 Jun 2016 15:08:21 -0700 [thread overview]
Message-ID: <1465250923-78695-17-git-send-email-stephen.hurd@broadcom.com> (raw)
In-Reply-To: <1465250923-78695-1-git-send-email-stephen.hurd@broadcom.com>
From: Ajit Khaparde <ajit.khaparde@broadcom.com>
This requires a group info array in struct bnxt, so add that, save
the max size from the func_qcap response, and alloc/free in init/uninit
As mentioned in the previous patch, A VNIC represents a virtual interface.
It is a resource in the RX path of the chip and is used to setup various
target actions such as RSS, MAC filtering etc.. for the physical function
in use.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: David Christensen <david.christensen@broadcom.com>
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
---
drivers/net/bnxt/bnxt.h | 2 +
drivers/net/bnxt/bnxt_hwrm.c | 33 ++++++++++++
drivers/net/bnxt/bnxt_hwrm.h | 2 +
drivers/net/bnxt/hsi_struct_def_dpdk.h | 99 ++++++++++++++++++++++++++++++++++
4 files changed, 136 insertions(+)
diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h
index f7cf9d1..df1f771 100644
--- a/drivers/net/bnxt/bnxt.h
+++ b/drivers/net/bnxt/bnxt.h
@@ -141,6 +141,8 @@ struct bnxt {
/* Default completion ring */
struct bnxt_cp_ring_info *def_cp_ring;
+ uint32_t max_ring_grps;
+ struct bnxt_ring_grp_info *grp_info;
unsigned int nr_vnics;
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 3400083..77afb81 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -43,7 +43,9 @@
#include "bnxt_filter.h"
#include "bnxt_hwrm.h"
#include "bnxt_rxq.h"
+#include "bnxt_ring.h"
#include "bnxt_txq.h"
+#include "bnxt_vnic.h"
#include "hsi_struct_def_dpdk.h"
#define HWRM_CMD_TIMEOUT 2000
@@ -191,6 +193,7 @@ int bnxt_hwrm_func_qcaps(struct bnxt *bp)
HWRM_CHECK_RESULT;
+ bp->max_ring_grps = rte_le_to_cpu_32(resp->max_hw_ring_grps);
if (BNXT_PF(bp)) {
struct bnxt_pf_info *pf = &bp->pf;
@@ -477,6 +480,36 @@ int bnxt_hwrm_stat_clear(struct bnxt *bp, struct bnxt_cp_ring_info *cpr)
return rc;
}
+int bnxt_hwrm_vnic_alloc(struct bnxt *bp, struct bnxt_vnic_info *vnic)
+{
+ int rc = 0, i, j;
+ struct hwrm_vnic_alloc_input req = {.req_type = 0 };
+ struct hwrm_vnic_alloc_output *resp = bp->hwrm_cmd_resp_addr;
+
+ /* map ring groups to this vnic */
+ for (i = vnic->start_grp_id, j = 0; i <= vnic->end_grp_id; i++, j++) {
+ if (bp->grp_info[i].fw_grp_id == (uint16_t)HWRM_NA_SIGNATURE) {
+ RTE_LOG(ERR, PMD,
+ "Not enough ring groups avail:%x req:%x\n", j,
+ (vnic->end_grp_id - vnic->start_grp_id) + 1);
+ break;
+ }
+ vnic->fw_grp_ids[j] = bp->grp_info[i].fw_grp_id;
+ }
+
+ vnic->fw_rss_cos_lb_ctx = (uint16_t)HWRM_NA_SIGNATURE;
+ vnic->ctx_is_rss_cos_lb = HW_CONTEXT_NONE;
+
+ HWRM_PREP(req, VNIC_ALLOC, -1, resp);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ HWRM_CHECK_RESULT;
+
+ vnic->fw_vnic_id = rte_le_to_cpu_16(resp->vnic_id);
+ return rc;
+}
+
/*
* HWRM utility functions
*/
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index 4fa94aa..62dc801 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -59,6 +59,8 @@ int bnxt_hwrm_stat_clear(struct bnxt *bp, struct bnxt_cp_ring_info *cpr);
int bnxt_hwrm_ver_get(struct bnxt *bp);
+int bnxt_hwrm_vnic_alloc(struct bnxt *bp, struct bnxt_vnic_info *vnic);
+
int bnxt_clear_all_hwrm_stat_ctxs(struct bnxt *bp);
void bnxt_free_hwrm_resources(struct bnxt *bp);
int bnxt_alloc_hwrm_resources(struct bnxt *bp);
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index 6209368..eedd368 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -89,6 +89,7 @@ struct ctx_hw_stats64 {
#define HWRM_FUNC_DRV_RGTR (UINT32_C(0x1d))
#define HWRM_PORT_PHY_CFG (UINT32_C(0x20))
#define HWRM_QUEUE_QPORTCFG (UINT32_C(0x30))
+#define HWRM_VNIC_ALLOC (UINT32_C(0x40))
#define HWRM_CFA_L2_FILTER_ALLOC (UINT32_C(0x90))
#define HWRM_CFA_L2_FILTER_FREE (UINT32_C(0x91))
#define HWRM_CFA_L2_FILTER_CFG (UINT32_C(0x92))
@@ -3119,6 +3120,104 @@ struct hwrm_stat_ctx_clr_stats_output {
uint8_t valid;
} __attribute__((packed));
+/* hwrm_vnic_alloc */
+/*
+ * Description: This VNIC is a resource in the RX side of the chip that is used
+ * to represent a virtual host "interface". # At the time of VNIC allocation or
+ * configuration, the function can specify whether it wants the requested VNIC
+ * to be the default VNIC for the function or not. # If a function requests
+ * allocation of a VNIC for the first time and a VNIC is successfully allocated
+ * by the HWRM, then the HWRM shall make the allocated VNIC as the default VNIC
+ * for that function. # The default VNIC shall be used for the default action
+ * for a partition or function. # For each VNIC allocated on a function, a
+ * mapping on the RX side to map the allocated VNIC to source virtual interface
+ * shall be performed by the HWRM. This should be hidden to the function driver
+ * requesting the VNIC allocation. This enables broadcast/multicast replication
+ * with source knockout. # If multicast replication with source knockout is
+ * enabled, then the internal VNIC to SVIF mapping data structures shall be
+ * programmed at the time of VNIC allocation.
+ */
+
+/* Input (24 bytes) */
+struct hwrm_vnic_alloc_input {
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t req_type;
+
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t cmpl_ring;
+
+ /* This value indicates the command sequence number. */
+ uint16_t seq_id;
+
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t resp_addr;
+
+ /*
+ * When this bit is '1', this VNIC is requested to be the default VNIC
+ * for this function.
+ */
+ #define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
+ uint32_t flags;
+
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_vnic_alloc_output {
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t error_code;
+
+ /* This field returns the type of original request. */
+ uint16_t req_type;
+
+ /* This field provides original sequence number of the command. */
+ uint16_t seq_id;
+
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t resp_len;
+
+ /* Logical vnic ID */
+ uint32_t vnic_id;
+
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
/* hwrm_vnic_rss_cfg */
/* Description: This function is used to enable RSS configuration. */
--
1.9.1
next prev parent reply other threads:[~2016-06-06 22:09 UTC|newest]
Thread overview: 132+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-06 22:08 [dpdk-dev] [PATCH v4 01/39] bnxt: new driver for Broadcom NetXtreme-C devices Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 02/39] bnxt: add HWRM init code Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 03/39] bnxt: add driver register/unregister support Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 04/39] bnxt: add dev infos get operation Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 05/39] bnxt: add dev configure operation Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 06/39] bnxt: add vnic functions and structs Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 07/39] bnxt: declare ring structs and free() func Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 08/39] bnxt: add completion ring support Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 09/39] bnxt: add L2 filter alloc/init/free Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 10/39] bnxt: add Tx queue operations (nonfunctional) Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 11/39] bnxt: add Rx queue create/destroy operations Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 12/39] bnxt: Add statistics operations Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 13/39] bnxt: initial Tx code implementation Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 14/39] bnxt: initial Rx " Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 15/39] bnxt: Code to alloc/free ring Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 16/39] bnxt: add HWRM function reset command Stephen Hurd
2016-06-06 22:08 ` Stephen Hurd [this message]
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 18/39] bnxt: add HWRM vnic free function Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 19/39] bnxt: add HWRM vnic configure function Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 20/39] bnxt: add API to allow configuration of vnic Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 21/39] bnxt: add HWRM API to configure RSS Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 22/39] bnxt: add API for L2 Rx mask set/clear functions Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 23/39] bnxt: add HWRM stats context allocation Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 24/39] bnxt: add HWRM ring alloc/free functions Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 25/39] bnxt: add ring group " Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 26/39] bnxt: add HWRM stat context free function Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 27/39] bnxt: Add HWRM API to set and clear filters Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 28/39] bnxt: add ring alloc, free and group init Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 29/39] bnxt: add HWRM port PHY config call and helpers Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 30/39] bnxt: add start/stop/link update operations Stephen Hurd
2016-06-08 10:02 ` Bruce Richardson
2016-06-08 10:41 ` Bruce Richardson
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 31/39] bnxt: add promiscuous enable/disable operations Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 32/39] bnxt: add all multicast " Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 33/39] bnxt: free memory in close operation Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 34/39] bnxt: add MAC address add/remove dev_ops Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 35/39] bnxt: add set link up/down operations Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 36/39] bnxt: add reta update/query operations Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 37/39] bnxt: add RSS device operations Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 38/39] bnxt: add flow control operations Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 39/39] bnxt: Replace bnxt_ring_struct with bnxt_ring Stephen Hurd
2016-06-07 6:25 ` [dpdk-dev] [PATCH v4 01/39] bnxt: new driver for Broadcom NetXtreme-C devices Thomas Monjalon
2016-06-08 10:31 ` Bruce Richardson
2016-06-08 10:21 ` Bruce Richardson
2016-06-08 10:41 ` Bruce Richardson
2016-06-14 13:14 ` Bruce Richardson
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 01/38] " Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 02/38] bnxt: add HWRM init code Stephen Hurd
2016-06-15 16:25 ` Ferruh Yigit
2016-06-15 20:28 ` Stephen Hurd
2016-06-16 9:46 ` Bruce Richardson
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 03/38] bnxt: add driver register/unregister support Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 04/38] bnxt: add dev infos get operation Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 05/38] bnxt: add dev configure operation Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 06/38] bnxt: add vnic functions and structs Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 07/38] bnxt: declare generic ring structs and free() func Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 08/38] bnxt: add completion ring support Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 09/38] bnxt: add L2 filter alloc/init/free Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 10/38] bnxt: add Tx queue operations (nonfunctional) Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 11/38] bnxt: add Rx queue create/destroy operations Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 12/38] bnxt: add statistics operations Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 13/38] bnxt: add initial Tx code implementation Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 14/38] bnxt: add initial Rx " Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 15/38] bnxt: add code to alloc/free Tx Rx and cmpl rings Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 16/38] bnxt: add HWRM function reset command Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 17/38] bnxt: add HWRM vnic alloc function Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 18/38] bnxt: add HWRM vnic free function Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 19/38] bnxt: add HWRM vnic configure function Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 20/38] bnxt: add API to allow configuration of vnic Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 21/38] bnxt: add HWRM API to configure RSS Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 22/38] bnxt: add API for L2 Rx mask set/clear functions Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 23/38] bnxt: add HWRM API for stats context allocation Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 24/38] bnxt: add HWRM ring alloc/free functions Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 25/38] bnxt: add ring group " Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 26/38] bnxt: add HWRM stat context free function Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 27/38] bnxt: add HWRM API to set and clear filters Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 28/38] bnxt: allocate and free all HWRM rings and groups Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 29/38] bnxt: add HWRM port PHY config call and helpers Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 30/38] bnxt: add start/stop/link update operations Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 31/38] bnxt: add promiscuous enable/disable operations Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 32/38] bnxt: add all multicast " Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 33/38] bnxt: free memory in close operation Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 34/38] bnxt: add MAC address add/remove dev ops Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 35/38] bnxt: add set link up/down operations Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 36/38] bnxt: add reta update/query operations Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 37/38] bnxt: add RSS device operations Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 38/38] bnxt: add flow control operations Stephen Hurd
2016-06-15 15:28 ` [dpdk-dev] [PATCH v5 01/38] bnxt: new driver for Broadcom NetXtreme-C devices Bruce Richardson
2016-06-15 15:30 ` Bruce Richardson
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 00/38] new bnxt poll mode driver library Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 01/38] bnxt: new driver for Broadcom NetXtreme-C devices Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 02/38] bnxt: add HWRM init code Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 03/38] bnxt: add driver register/unregister support Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 04/38] bnxt: add dev infos get operation Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 05/38] bnxt: add dev configure operation Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 06/38] bnxt: add vnic functions and structs Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 07/38] bnxt: declare generic ring structs and free() func Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 08/38] bnxt: add completion ring support Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 09/38] bnxt: add L2 filter alloc/init/free Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 10/38] bnxt: add Tx queue operations (nonfunctional) Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 11/38] bnxt: add Rx queue create/destroy operations Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 12/38] bnxt: add statistics operations Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 13/38] bnxt: add initial Tx code implementation Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 14/38] bnxt: add initial Rx " Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 15/38] bnxt: add code to alloc/free Tx Rx and cmpl rings Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 16/38] bnxt: add HWRM function reset command Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 17/38] bnxt: add HWRM vnic alloc function Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 18/38] bnxt: add HWRM vnic free function Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 19/38] bnxt: add HWRM vnic configure function Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 20/38] bnxt: add API to allow configuration of vnic Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 21/38] bnxt: add HWRM API to configure RSS Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 22/38] bnxt: add API for L2 Rx mask set/clear functions Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 23/38] bnxt: add HWRM API for stats context allocation Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 24/38] bnxt: add HWRM ring alloc/free functions Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 25/38] bnxt: add ring group " Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 26/38] bnxt: add HWRM stat context free function Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 27/38] bnxt: add HWRM API to set and clear filters Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 28/38] bnxt: allocate and free all HWRM rings and groups Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 29/38] bnxt: add HWRM port PHY config call and helpers Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 30/38] bnxt: add start/stop/link update operations Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 31/38] bnxt: add promiscuous enable/disable operations Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 32/38] bnxt: add all multicast " Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 33/38] bnxt: free memory in close operation Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 34/38] bnxt: add MAC address add/remove dev ops Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 35/38] bnxt: add set link up/down operations Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 36/38] bnxt: add reta update/query operations Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 37/38] bnxt: add RSS device operations Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 38/38] bnxt: add flow control operations Stephen Hurd
2016-06-16 14:24 ` [dpdk-dev] [PATCH v6 00/38] new bnxt poll mode driver library Bruce Richardson
2016-06-16 18:51 ` Ajit Khaparde
2016-06-21 14:25 ` Ajit Khaparde
2016-06-21 14:46 ` Bruce Richardson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465250923-78695-17-git-send-email-stephen.hurd@broadcom.com \
--to=stephen.hurd@broadcom.com \
--cc=ajit.khaparde@broadcom.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).