From: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
To: dev@dpdk.org
Cc: pablo.de.lara.guarch@intel.com, john.mcnamara@intel.com
Subject: [dpdk-dev] [PATCH v3 4/9] examples/ipsec-secgw: rework ipsec execution loop
Date: Thu, 9 Jun 2016 09:42:45 +0100 [thread overview]
Message-ID: <1465461770-42233-5-git-send-email-sergio.gonzalez.monroy@intel.com> (raw)
In-Reply-To: <1465461770-42233-1-git-send-email-sergio.gonzalez.monroy@intel.com>
Rework implementation moving from function pointers approach, where each
function implements very specific functionality, to a generic function
approach.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
---
examples/ipsec-secgw/esp.c | 9 +-
examples/ipsec-secgw/esp.h | 9 +-
examples/ipsec-secgw/ipsec.c | 36 ++++--
examples/ipsec-secgw/ipsec.h | 2 -
examples/ipsec-secgw/sa.c | 272 ++++++++++++++++++-------------------------
5 files changed, 145 insertions(+), 183 deletions(-)
diff --git a/examples/ipsec-secgw/esp.c b/examples/ipsec-secgw/esp.c
index 7dce78c..2ca97ad 100644
--- a/examples/ipsec-secgw/esp.c
+++ b/examples/ipsec-secgw/esp.c
@@ -67,9 +67,8 @@ random_iv_u64(uint64_t *buf, uint16_t n)
*((uint32_t *)&buf[i]) = (uint32_t)lrand48();
}
-/* IPv4 Tunnel */
int
-esp4_tunnel_inbound_pre_crypto(struct rte_mbuf *m, struct ipsec_sa *sa,
+esp_inbound(struct rte_mbuf *m, struct ipsec_sa *sa,
struct rte_crypto_op *cop)
{
int32_t payload_len;
@@ -117,7 +116,7 @@ esp4_tunnel_inbound_pre_crypto(struct rte_mbuf *m, struct ipsec_sa *sa,
}
int
-esp4_tunnel_inbound_post_crypto(struct rte_mbuf *m, struct ipsec_sa *sa,
+esp_inbound_post(struct rte_mbuf *m, struct ipsec_sa *sa,
struct rte_crypto_op *cop)
{
uint8_t *nexthdr, *pad_len;
@@ -155,7 +154,7 @@ esp4_tunnel_inbound_post_crypto(struct rte_mbuf *m, struct ipsec_sa *sa,
}
int
-esp4_tunnel_outbound_pre_crypto(struct rte_mbuf *m, struct ipsec_sa *sa,
+esp_outbound(struct rte_mbuf *m, struct ipsec_sa *sa,
struct rte_crypto_op *cop)
{
uint16_t pad_payload_len, pad_len;
@@ -234,7 +233,7 @@ esp4_tunnel_outbound_pre_crypto(struct rte_mbuf *m, struct ipsec_sa *sa,
}
int
-esp4_tunnel_outbound_post_crypto(struct rte_mbuf *m __rte_unused,
+esp_outbound_post(struct rte_mbuf *m __rte_unused,
struct ipsec_sa *sa __rte_unused,
struct rte_crypto_op *cop)
{
diff --git a/examples/ipsec-secgw/esp.h b/examples/ipsec-secgw/esp.h
index 3101882..fa5cc8a 100644
--- a/examples/ipsec-secgw/esp.h
+++ b/examples/ipsec-secgw/esp.h
@@ -46,21 +46,20 @@ struct esp_hdr {
/* Integrity Check Value - ICV */
};
-/* IPv4 Tunnel */
int
-esp4_tunnel_inbound_pre_crypto(struct rte_mbuf *m, struct ipsec_sa *sa,
+esp_inbound(struct rte_mbuf *m, struct ipsec_sa *sa,
struct rte_crypto_op *cop);
int
-esp4_tunnel_inbound_post_crypto(struct rte_mbuf *m, struct ipsec_sa *sa,
+esp_inbound_post(struct rte_mbuf *m, struct ipsec_sa *sa,
struct rte_crypto_op *cop);
int
-esp4_tunnel_outbound_pre_crypto(struct rte_mbuf *m, struct ipsec_sa *sa,
+esp_outbound(struct rte_mbuf *m, struct ipsec_sa *sa,
struct rte_crypto_op *cop);
int
-esp4_tunnel_outbound_post_crypto(struct rte_mbuf *m, struct ipsec_sa *sa,
+esp_outbound_post(struct rte_mbuf *m, struct ipsec_sa *sa,
struct rte_crypto_op *cop);
#endif /* __RTE_IPSEC_XFORM_ESP_H__ */
diff --git a/examples/ipsec-secgw/ipsec.c b/examples/ipsec-secgw/ipsec.c
index 3ffa77a..90a9a86 100644
--- a/examples/ipsec-secgw/ipsec.c
+++ b/examples/ipsec-secgw/ipsec.c
@@ -42,6 +42,7 @@
#include <rte_hash.h>
#include "ipsec.h"
+#include "esp.h"
static inline int
create_session(struct ipsec_ctx *ipsec_ctx __rte_unused, struct ipsec_sa *sa)
@@ -99,15 +100,14 @@ enqueue_cop(struct cdev_qp *cqp, struct rte_crypto_op *cop)
}
}
-static inline uint16_t
-ipsec_processing(struct ipsec_ctx *ipsec_ctx, struct rte_mbuf *pkts[],
- struct ipsec_sa *sas[], uint16_t nb_pkts, uint16_t max_pkts)
+static inline void
+ipsec_enqueue(ipsec_xform_fn xform_func, struct ipsec_ctx *ipsec_ctx,
+ struct rte_mbuf *pkts[], struct ipsec_sa *sas[],
+ uint16_t nb_pkts)
{
- int ret = 0, i, j, nb_cops;
+ int ret = 0, i;
struct ipsec_mbuf_metadata *priv;
- struct rte_crypto_op *cops[max_pkts];
struct ipsec_sa *sa;
- struct rte_mbuf *pkt;
for (i = 0; i < nb_pkts; i++) {
rte_prefetch0(sas[i]);
@@ -133,7 +133,7 @@ ipsec_processing(struct ipsec_ctx *ipsec_ctx, struct rte_mbuf *pkts[],
rte_crypto_op_attach_sym_session(&priv->cop,
sa->crypto_session);
- ret = sa->pre_crypto(pkts[i], sa, &priv->cop);
+ ret = xform_func(pkts[i], sa, &priv->cop);
if (unlikely(ret)) {
rte_pktmbuf_free(pkts[i]);
continue;
@@ -142,8 +142,18 @@ ipsec_processing(struct ipsec_ctx *ipsec_ctx, struct rte_mbuf *pkts[],
RTE_ASSERT(sa->cdev_id_qp < ipsec_ctx->nb_qps);
enqueue_cop(&ipsec_ctx->tbl[sa->cdev_id_qp], &priv->cop);
}
+}
+
+static inline int
+ipsec_dequeue(ipsec_xform_fn xform_func, struct ipsec_ctx *ipsec_ctx,
+ struct rte_mbuf *pkts[], uint16_t max_pkts)
+{
+ int nb_pkts = 0, ret = 0, i, j, nb_cops;
+ struct ipsec_mbuf_metadata *priv;
+ struct rte_crypto_op *cops[max_pkts];
+ struct ipsec_sa *sa;
+ struct rte_mbuf *pkt;
- nb_pkts = 0;
for (i = 0; i < ipsec_ctx->nb_qps && nb_pkts < max_pkts; i++) {
struct cdev_qp *cqp;
@@ -168,7 +178,7 @@ ipsec_processing(struct ipsec_ctx *ipsec_ctx, struct rte_mbuf *pkts[],
RTE_ASSERT(sa != NULL);
- ret = sa->post_crypto(pkt, sa, cops[j]);
+ ret = xform_func(pkt, sa, cops[j]);
if (unlikely(ret))
rte_pktmbuf_free(pkt);
else
@@ -188,7 +198,9 @@ ipsec_inbound(struct ipsec_ctx *ctx, struct rte_mbuf *pkts[],
inbound_sa_lookup(ctx->sa_ctx, pkts, sas, nb_pkts);
- return ipsec_processing(ctx, pkts, sas, nb_pkts, len);
+ ipsec_enqueue(esp_inbound, ctx, pkts, sas, nb_pkts);
+
+ return ipsec_dequeue(esp_inbound_post, ctx, pkts, len);
}
uint16_t
@@ -199,5 +211,7 @@ ipsec_outbound(struct ipsec_ctx *ctx, struct rte_mbuf *pkts[],
outbound_sa_lookup(ctx->sa_ctx, sa_idx, sas, nb_pkts);
- return ipsec_processing(ctx, pkts, sas, nb_pkts, len);
+ ipsec_enqueue(esp_outbound, ctx, pkts, sas, nb_pkts);
+
+ return ipsec_dequeue(esp_outbound_post, ctx, pkts, len);
}
diff --git a/examples/ipsec-secgw/ipsec.h b/examples/ipsec-secgw/ipsec.h
index e60fae6..74ef6fc 100644
--- a/examples/ipsec-secgw/ipsec.h
+++ b/examples/ipsec-secgw/ipsec.h
@@ -86,8 +86,6 @@ struct ipsec_sa {
uint32_t dst;
struct rte_cryptodev_sym_session *crypto_session;
struct rte_crypto_sym_xform *xforms;
- ipsec_xform_fn pre_crypto;
- ipsec_xform_fn post_crypto;
enum rte_crypto_cipher_algorithm cipher_algo;
enum rte_crypto_auth_algorithm auth_algo;
uint16_t digest_len;
diff --git a/examples/ipsec-secgw/sa.c b/examples/ipsec-secgw/sa.c
index b6260ed..a193bdf 100644
--- a/examples/ipsec-secgw/sa.c
+++ b/examples/ipsec-secgw/sa.c
@@ -47,160 +47,112 @@
#include "ipsec.h"
#include "esp.h"
-/* SAs EP0 Outbound */
-const struct ipsec_sa sa_ep0_out[] = {
- { 5, 0, IPv4(172, 16, 1, 5), IPv4(172, 16, 2, 5),
- NULL, NULL,
- esp4_tunnel_outbound_pre_crypto,
- esp4_tunnel_outbound_post_crypto,
- RTE_CRYPTO_CIPHER_AES_CBC, RTE_CRYPTO_AUTH_SHA1_HMAC,
- 12, 16, 16,
- 0, 0 },
- { 6, 0, IPv4(172, 16, 1, 6), IPv4(172, 16, 2, 6),
- NULL, NULL,
- esp4_tunnel_outbound_pre_crypto,
- esp4_tunnel_outbound_post_crypto,
- RTE_CRYPTO_CIPHER_AES_CBC, RTE_CRYPTO_AUTH_SHA1_HMAC,
- 12, 16, 16,
- 0, 0 },
- { 7, 0, IPv4(172, 16, 1, 7), IPv4(172, 16, 2, 7),
- NULL, NULL,
- esp4_tunnel_outbound_pre_crypto,
- esp4_tunnel_outbound_post_crypto,
- RTE_CRYPTO_CIPHER_AES_CBC, RTE_CRYPTO_AUTH_SHA1_HMAC,
- 12, 16, 16,
- 0, 0 },
- { 8, 0, IPv4(172, 16, 1, 8), IPv4(172, 16, 2, 8),
- NULL, NULL,
- esp4_tunnel_outbound_pre_crypto,
- esp4_tunnel_outbound_post_crypto,
- RTE_CRYPTO_CIPHER_AES_CBC, RTE_CRYPTO_AUTH_SHA1_HMAC,
- 12, 16, 16,
- 0, 0 },
- { 9, 0, IPv4(172, 16, 1, 5), IPv4(172, 16, 2, 5),
- NULL, NULL,
- esp4_tunnel_outbound_pre_crypto,
- esp4_tunnel_outbound_post_crypto,
- RTE_CRYPTO_CIPHER_NULL, RTE_CRYPTO_AUTH_NULL,
- 0, 0, 4,
- 0, 0 },
-};
-
-/* SAs EP0 Inbound */
-const struct ipsec_sa sa_ep0_in[] = {
- { 5, 0, IPv4(172, 16, 2, 5), IPv4(172, 16, 1, 5),
- NULL, NULL,
- esp4_tunnel_inbound_pre_crypto,
- esp4_tunnel_inbound_post_crypto,
- RTE_CRYPTO_CIPHER_AES_CBC, RTE_CRYPTO_AUTH_SHA1_HMAC,
- 12, 16, 16,
- 0, 0 },
- { 6, 0, IPv4(172, 16, 2, 6), IPv4(172, 16, 1, 6),
- NULL, NULL,
- esp4_tunnel_inbound_pre_crypto,
- esp4_tunnel_inbound_post_crypto,
- RTE_CRYPTO_CIPHER_AES_CBC, RTE_CRYPTO_AUTH_SHA1_HMAC,
- 12, 16, 16,
- 0, 0 },
- { 7, 0, IPv4(172, 16, 2, 7), IPv4(172, 16, 1, 7),
- NULL, NULL,
- esp4_tunnel_inbound_pre_crypto,
- esp4_tunnel_inbound_post_crypto,
- RTE_CRYPTO_CIPHER_AES_CBC, RTE_CRYPTO_AUTH_SHA1_HMAC,
- 12, 16, 16,
- 0, 0 },
- { 8, 0, IPv4(172, 16, 2, 8), IPv4(172, 16, 1, 8),
- NULL, NULL,
- esp4_tunnel_inbound_pre_crypto,
- esp4_tunnel_inbound_post_crypto,
- RTE_CRYPTO_CIPHER_AES_CBC, RTE_CRYPTO_AUTH_SHA1_HMAC,
- 12, 16, 16,
- 0, 0 },
- { 9, 0, IPv4(172, 16, 2, 5), IPv4(172, 16, 1, 5),
- NULL, NULL,
- esp4_tunnel_inbound_pre_crypto,
- esp4_tunnel_inbound_post_crypto,
- RTE_CRYPTO_CIPHER_NULL, RTE_CRYPTO_AUTH_NULL,
- 0, 0, 4,
- 0, 0 },
-};
-
-/* SAs EP1 Outbound */
-const struct ipsec_sa sa_ep1_out[] = {
- { 5, 0, IPv4(172, 16, 2, 5), IPv4(172, 16, 1, 5),
- NULL, NULL,
- esp4_tunnel_outbound_pre_crypto,
- esp4_tunnel_outbound_post_crypto,
- RTE_CRYPTO_CIPHER_AES_CBC, RTE_CRYPTO_AUTH_SHA1_HMAC,
- 12, 16, 16,
- 0, 0 },
- { 6, 0, IPv4(172, 16, 2, 6), IPv4(172, 16, 1, 6),
- NULL, NULL,
- esp4_tunnel_outbound_pre_crypto,
- esp4_tunnel_outbound_post_crypto,
- RTE_CRYPTO_CIPHER_AES_CBC, RTE_CRYPTO_AUTH_SHA1_HMAC,
- 12, 16, 16,
- 0, 0 },
- { 7, 0, IPv4(172, 16, 2, 7), IPv4(172, 16, 1, 7),
- NULL, NULL,
- esp4_tunnel_outbound_pre_crypto,
- esp4_tunnel_outbound_post_crypto,
- RTE_CRYPTO_CIPHER_AES_CBC, RTE_CRYPTO_AUTH_SHA1_HMAC,
- 12, 16, 16,
- 0, 0 },
- { 8, 0, IPv4(172, 16, 2, 8), IPv4(172, 16, 1, 8),
- NULL, NULL,
- esp4_tunnel_outbound_pre_crypto,
- esp4_tunnel_outbound_post_crypto,
- RTE_CRYPTO_CIPHER_AES_CBC, RTE_CRYPTO_AUTH_SHA1_HMAC,
- 12, 16, 16,
- 0, 0 },
- { 9, 0, IPv4(172, 16, 2, 5), IPv4(172, 16, 1, 5),
- NULL, NULL,
- esp4_tunnel_outbound_pre_crypto,
- esp4_tunnel_outbound_post_crypto,
- RTE_CRYPTO_CIPHER_NULL, RTE_CRYPTO_AUTH_NULL,
- 0, 0, 4,
- 0, 0 },
+/* SAs Outbound */
+const struct ipsec_sa sa_out[] = {
+ {
+ .spi = 5,
+ .src = IPv4(172, 16, 1, 5),
+ .dst = IPv4(172, 16, 2, 5),
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .digest_len = 12,
+ .iv_len = 16,
+ .block_size = 16,
+ },
+ {
+ .spi = 6,
+ .src = IPv4(172, 16, 1, 6),
+ .dst = IPv4(172, 16, 2, 6),
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .digest_len = 12,
+ .iv_len = 16,
+ .block_size = 16,
+ },
+ {
+ .spi = 7,
+ .src = IPv4(172, 16, 1, 7),
+ .dst = IPv4(172, 16, 2, 7),
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .digest_len = 12,
+ .iv_len = 16,
+ .block_size = 16,
+ },
+ {
+ .spi = 8,
+ .src = IPv4(172, 16, 1, 8),
+ .dst = IPv4(172, 16, 2, 8),
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .digest_len = 12,
+ .iv_len = 16,
+ .block_size = 16,
+ },
+ {
+ .spi = 9,
+ .src = IPv4(172, 16, 1, 9),
+ .dst = IPv4(172, 16, 2, 9),
+ .cipher_algo = RTE_CRYPTO_CIPHER_NULL,
+ .auth_algo = RTE_CRYPTO_AUTH_NULL,
+ .digest_len = 0,
+ .iv_len = 0,
+ .block_size = 4,
+ }
};
-/* SAs EP1 Inbound */
-const struct ipsec_sa sa_ep1_in[] = {
- { 5, 0, IPv4(172, 16, 1, 5), IPv4(172, 16, 2, 5),
- NULL, NULL,
- esp4_tunnel_inbound_pre_crypto,
- esp4_tunnel_inbound_post_crypto,
- RTE_CRYPTO_CIPHER_AES_CBC, RTE_CRYPTO_AUTH_SHA1_HMAC,
- 12, 16, 16,
- 0, 0 },
- { 6, 0, IPv4(172, 16, 1, 6), IPv4(172, 16, 2, 6),
- NULL, NULL,
- esp4_tunnel_inbound_pre_crypto,
- esp4_tunnel_inbound_post_crypto,
- RTE_CRYPTO_CIPHER_AES_CBC, RTE_CRYPTO_AUTH_SHA1_HMAC,
- 12, 16, 16,
- 0, 0 },
- { 7, 0, IPv4(172, 16, 1, 7), IPv4(172, 16, 2, 7),
- NULL, NULL,
- esp4_tunnel_inbound_pre_crypto,
- esp4_tunnel_inbound_post_crypto,
- RTE_CRYPTO_CIPHER_AES_CBC, RTE_CRYPTO_AUTH_SHA1_HMAC,
- 12, 16, 16,
- 0, 0 },
- { 8, 0, IPv4(172, 16, 1, 8), IPv4(172, 16, 2, 8),
- NULL, NULL,
- esp4_tunnel_inbound_pre_crypto,
- esp4_tunnel_inbound_post_crypto,
- RTE_CRYPTO_CIPHER_AES_CBC, RTE_CRYPTO_AUTH_SHA1_HMAC,
- 12, 16, 16,
- 0, 0 },
- { 9, 0, IPv4(172, 16, 1, 5), IPv4(172, 16, 2, 5),
- NULL, NULL,
- esp4_tunnel_inbound_pre_crypto,
- esp4_tunnel_inbound_post_crypto,
- RTE_CRYPTO_CIPHER_NULL, RTE_CRYPTO_AUTH_NULL,
- 0, 0, 4,
- 0, 0 },
+/* SAs Inbound */
+const struct ipsec_sa sa_in[] = {
+ {
+ .spi = 55,
+ .src = IPv4(172, 16, 2, 5),
+ .dst = IPv4(172, 16, 1, 5),
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .digest_len = 12,
+ .iv_len = 16,
+ .block_size = 16,
+ },
+ {
+ .spi = 56,
+ .src = IPv4(172, 16, 2, 6),
+ .dst = IPv4(172, 16, 1, 6),
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .digest_len = 12,
+ .iv_len = 16,
+ .block_size = 16,
+ },
+ {
+ .spi = 57,
+ .src = IPv4(172, 16, 2, 7),
+ .dst = IPv4(172, 16, 1, 7),
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .digest_len = 12,
+ .iv_len = 16,
+ .block_size = 16,
+ },
+ {
+ .spi = 58,
+ .src = IPv4(172, 16, 2, 8),
+ .dst = IPv4(172, 16, 1, 8),
+ .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .digest_len = 12,
+ .iv_len = 16,
+ .block_size = 16,
+ },
+ {
+ .spi = 59,
+ .src = IPv4(172, 16, 2, 9),
+ .dst = IPv4(172, 16, 1, 9),
+ .cipher_algo = RTE_CRYPTO_CIPHER_NULL,
+ .auth_algo = RTE_CRYPTO_AUTH_NULL,
+ .digest_len = 0,
+ .iv_len = 0,
+ .block_size = 4,
+ }
};
static uint8_t cipher_key[256] = "sixteenbytes key";
@@ -368,15 +320,15 @@ sa_init(struct socket_ctx *ctx, int socket_id, unsigned ep)
"initialized\n", socket_id);
if (ep == 0) {
- sa_out_entries = sa_ep0_out;
- nb_out_entries = RTE_DIM(sa_ep0_out);
- sa_in_entries = sa_ep0_in;
- nb_in_entries = RTE_DIM(sa_ep0_in);
+ sa_out_entries = sa_out;
+ nb_out_entries = RTE_DIM(sa_out);
+ sa_in_entries = sa_in;
+ nb_in_entries = RTE_DIM(sa_in);
} else if (ep == 1) {
- sa_out_entries = sa_ep1_out;
- nb_out_entries = RTE_DIM(sa_ep1_out);
- sa_in_entries = sa_ep1_in;
- nb_in_entries = RTE_DIM(sa_ep1_in);
+ sa_out_entries = sa_in;
+ nb_out_entries = RTE_DIM(sa_in);
+ sa_in_entries = sa_out;
+ nb_in_entries = RTE_DIM(sa_out);
} else
rte_exit(EXIT_FAILURE, "Invalid EP value %u. "
"Only 0 or 1 supported.\n", ep);
--
2.5.5
next prev parent reply other threads:[~2016-06-09 8:43 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-06 16:31 [dpdk-dev] [PATCH 0/9] IPSec example enhancements Sergio Gonzalez Monroy
2016-05-06 16:31 ` [dpdk-dev] [PATCH 1/9] examples/ipsec-secgw: fix esp padding check Sergio Gonzalez Monroy
2016-05-06 16:31 ` [dpdk-dev] [PATCH 2/9] examples/ipsec-secgw: fix stack smashing error Sergio Gonzalez Monroy
2016-05-06 16:31 ` [dpdk-dev] [PATCH 3/9] examples/ipsec-secgw: add build option and cleanup Sergio Gonzalez Monroy
2016-05-06 16:31 ` [dpdk-dev] [PATCH 4/9] examples/ipsec-secgw: rework ipsec execution loop Sergio Gonzalez Monroy
2016-05-06 16:31 ` [dpdk-dev] [PATCH 5/9] examples/ipsec-secgw: fix no sa found case Sergio Gonzalez Monroy
2016-05-06 16:31 ` [dpdk-dev] [PATCH 6/9] examples/ipsec-secgw: consistent config variable names Sergio Gonzalez Monroy
2016-05-06 16:31 ` [dpdk-dev] [PATCH 7/9] examples/ipsec-secgw: ipv6 support Sergio Gonzalez Monroy
2016-05-06 16:31 ` [dpdk-dev] [PATCH 8/9] examples/ipsec-secgw: transport mode support Sergio Gonzalez Monroy
2016-05-06 16:31 ` [dpdk-dev] [PATCH 9/9] doc: update ipsec sample guide Sergio Gonzalez Monroy
2016-05-10 9:21 ` Mcnamara, John
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 0/9] IPSec enhancements Sergio Gonzalez Monroy
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 1/9] examples/ipsec-secgw: fix esp padding check Sergio Gonzalez Monroy
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 2/9] examples/ipsec-secgw: fix stack smashing error Sergio Gonzalez Monroy
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 3/9] examples/ipsec-secgw: add build option and cleanup Sergio Gonzalez Monroy
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 4/9] examples/ipsec-secgw: rework ipsec execution loop Sergio Gonzalez Monroy
2016-06-07 12:50 ` De Lara Guarch, Pablo
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 5/9] examples/ipsec-secgw: fix no sa found case Sergio Gonzalez Monroy
2016-06-07 13:17 ` De Lara Guarch, Pablo
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 6/9] examples/ipsec-secgw: consistent config variable names Sergio Gonzalez Monroy
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 7/9] examples/ipsec-secgw: ipv6 support Sergio Gonzalez Monroy
2016-06-07 16:10 ` De Lara Guarch, Pablo
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 8/9] examples/ipsec-secgw: transport mode support Sergio Gonzalez Monroy
2016-05-18 12:42 ` [dpdk-dev] [PATCH v2 9/9] doc: update ipsec sample guide Sergio Gonzalez Monroy
2016-05-18 13:43 ` Mcnamara, John
2016-06-09 8:42 ` [dpdk-dev] [PATCH v3 0/9] IPSec Enhancements Sergio Gonzalez Monroy
2016-06-09 8:42 ` [dpdk-dev] [PATCH v3 1/9] examples/ipsec-secgw: fix esp padding check Sergio Gonzalez Monroy
2016-06-09 8:42 ` [dpdk-dev] [PATCH v3 2/9] examples/ipsec-secgw: fix stack smashing error Sergio Gonzalez Monroy
2016-06-09 8:42 ` [dpdk-dev] [PATCH v3 3/9] examples/ipsec-secgw: add build option and cleanup Sergio Gonzalez Monroy
2016-06-09 8:42 ` Sergio Gonzalez Monroy [this message]
2016-06-09 8:42 ` [dpdk-dev] [PATCH v3 5/9] examples/ipsec-secgw: fix no sa found case Sergio Gonzalez Monroy
2016-06-09 8:42 ` [dpdk-dev] [PATCH v3 6/9] examples/ipsec-secgw: consistent config variable names Sergio Gonzalez Monroy
2016-06-09 8:42 ` [dpdk-dev] [PATCH v3 7/9] examples/ipsec-secgw: ipv6 support Sergio Gonzalez Monroy
2016-06-09 8:42 ` [dpdk-dev] [PATCH v3 8/9] examples/ipsec-secgw: transport mode support Sergio Gonzalez Monroy
2016-06-09 8:42 ` [dpdk-dev] [PATCH v3 9/9] doc: update ipsec sample guide Sergio Gonzalez Monroy
2016-06-09 11:11 ` Mcnamara, John
2016-06-09 11:58 ` [dpdk-dev] [PATCH v3 0/9] IPSec Enhancements De Lara Guarch, Pablo
2016-06-21 10:14 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465461770-42233-5-git-send-email-sergio.gonzalez.monroy@intel.com \
--to=sergio.gonzalez.monroy@intel.com \
--cc=dev@dpdk.org \
--cc=john.mcnamara@intel.com \
--cc=pablo.de.lara.guarch@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).