From: Stephen Hurd <stephen.hurd@broadcom.com>
To: dev@dpdk.org, ajit.khaparde@broadcom.com, bruce.richardson@intel.com
Subject: [dpdk-dev] [PATCH v5 24/38] bnxt: add HWRM ring alloc/free functions
Date: Tue, 14 Jun 2016 15:55:57 -0700 [thread overview]
Message-ID: <1465944971-113413-24-git-send-email-stephen.hurd@broadcom.com> (raw)
In-Reply-To: <1465944971-113413-1-git-send-email-stephen.hurd@broadcom.com>
From: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add HWRM API calls to allocate and free TX, RX and Completion rings
in the hardware along with the associated structs and definitions.
This informs the hardware of how the specific rings were set up in the
host and allocates them in the HWRM, setting up the doorbell registers
etc. as needed, returning an ID for the ring.
Basic ring alloc/free calls:
bnxt_hwrm_ring_alloc
This command allocates and does basic preparation for a ring.
bnxt_hwrm_ring_free
This command is used to free a ring and associated resources.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Reviewed-by: David Christensen <david.christensen@broadcom.com>
--
v4:
Address review comments.
v5:
Rewrite the patch description.
Reorder the footer.
---
drivers/net/bnxt/bnxt_hwrm.c | 108 ++++++++++++
drivers/net/bnxt/bnxt_hwrm.h | 7 +
drivers/net/bnxt/hsi_struct_def_dpdk.h | 305 +++++++++++++++++++++++++++++++++
3 files changed, 420 insertions(+)
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 420a1cc..565b76f 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -547,6 +547,114 @@ int bnxt_hwrm_queue_qportcfg(struct bnxt *bp)
return rc;
}
+int bnxt_hwrm_ring_alloc(struct bnxt *bp,
+ struct bnxt_ring *ring,
+ uint32_t ring_type, uint32_t map_index,
+ uint32_t stats_ctx_id)
+{
+ int rc = 0;
+ struct hwrm_ring_alloc_input req = {.req_type = 0 };
+ struct hwrm_ring_alloc_output *resp = bp->hwrm_cmd_resp_addr;
+
+ HWRM_PREP(req, RING_ALLOC, -1, resp);
+
+ req.enables = rte_cpu_to_le_32(0);
+
+ req.page_tbl_addr = rte_cpu_to_le_64(ring->bd_dma);
+ req.fbo = rte_cpu_to_le_32(0);
+ /* Association of ring index with doorbell index */
+ req.logical_id = rte_cpu_to_le_16(map_index);
+
+ switch (ring_type) {
+ case HWRM_RING_ALLOC_INPUT_RING_TYPE_TX:
+ req.queue_id = bp->cos_queue[0].id;
+ case HWRM_RING_ALLOC_INPUT_RING_TYPE_RX:
+ req.ring_type = ring_type;
+ req.cmpl_ring_id =
+ rte_cpu_to_le_16(bp->grp_info[map_index].cp_fw_ring_id);
+ req.length = rte_cpu_to_le_32(ring->ring_size);
+ req.stat_ctx_id = rte_cpu_to_le_16(stats_ctx_id);
+ req.enables = rte_cpu_to_le_32(rte_le_to_cpu_32(req.enables) |
+ HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID);
+ break;
+ case HWRM_RING_ALLOC_INPUT_RING_TYPE_CMPL:
+ req.ring_type = ring_type;
+ req.int_mode = HWRM_RING_ALLOC_INPUT_INT_MODE_POLL;
+ req.length = rte_cpu_to_le_32(ring->ring_size);
+ break;
+ default:
+ RTE_LOG(ERR, PMD, "hwrm alloc invalid ring type %d\n",
+ ring_type);
+ return -1;
+ }
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ if (rc || resp->error_code) {
+ if (rc == 0 && resp->error_code)
+ rc = rte_le_to_cpu_16(resp->error_code);
+ switch (ring_type) {
+ case HWRM_RING_FREE_INPUT_RING_TYPE_CMPL:
+ RTE_LOG(ERR, PMD,
+ "hwrm_ring_alloc cp failed. rc:%d\n", rc);
+ return rc;
+ case HWRM_RING_FREE_INPUT_RING_TYPE_RX:
+ RTE_LOG(ERR, PMD,
+ "hwrm_ring_alloc rx failed. rc:%d\n", rc);
+ return rc;
+ case HWRM_RING_FREE_INPUT_RING_TYPE_TX:
+ RTE_LOG(ERR, PMD,
+ "hwrm_ring_alloc tx failed. rc:%d\n", rc);
+ return rc;
+ default:
+ RTE_LOG(ERR, PMD, "Invalid ring. rc:%d\n", rc);
+ return rc;
+ }
+ }
+
+ ring->fw_ring_id = rte_le_to_cpu_16(resp->ring_id);
+ return rc;
+}
+
+int bnxt_hwrm_ring_free(struct bnxt *bp,
+ struct bnxt_ring *ring, uint32_t ring_type)
+{
+ int rc;
+ struct hwrm_ring_free_input req = {.req_type = 0 };
+ struct hwrm_ring_free_output *resp = bp->hwrm_cmd_resp_addr;
+
+ HWRM_PREP(req, RING_FREE, -1, resp);
+
+ req.ring_type = ring_type;
+ req.ring_id = rte_cpu_to_le_16(ring->fw_ring_id);
+
+ rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+ if (rc || resp->error_code) {
+ if (rc == 0 && resp->error_code)
+ rc = rte_le_to_cpu_16(resp->error_code);
+
+ switch (ring_type) {
+ case HWRM_RING_FREE_INPUT_RING_TYPE_CMPL:
+ RTE_LOG(ERR, PMD, "hwrm_ring_free cp failed. rc:%d\n",
+ rc);
+ return rc;
+ case HWRM_RING_FREE_INPUT_RING_TYPE_RX:
+ RTE_LOG(ERR, PMD, "hwrm_ring_free rx failed. rc:%d\n",
+ rc);
+ return rc;
+ case HWRM_RING_FREE_INPUT_RING_TYPE_TX:
+ RTE_LOG(ERR, PMD, "hwrm_ring_free tx failed. rc:%d\n",
+ rc);
+ return rc;
+ default:
+ RTE_LOG(ERR, PMD, "Invalid ring, rc:%d\n", rc);
+ return rc;
+ }
+ }
+ return 0;
+}
+
int bnxt_hwrm_stat_clear(struct bnxt *bp, struct bnxt_cp_ring_info *cpr)
{
int rc = 0;
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index 49966f5..ebde5fb 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -62,6 +62,13 @@ int bnxt_hwrm_func_driver_unregister(struct bnxt *bp, uint32_t flags);
int bnxt_hwrm_queue_qportcfg(struct bnxt *bp);
+int bnxt_hwrm_ring_alloc(struct bnxt *bp,
+ struct bnxt_ring *ring,
+ uint32_t ring_type, uint32_t map_index,
+ uint32_t stats_ctx_id);
+int bnxt_hwrm_ring_free(struct bnxt *bp,
+ struct bnxt_ring *ring, uint32_t ring_type);
+
int bnxt_hwrm_stat_clear(struct bnxt *bp, struct bnxt_cp_ring_info *cpr);
int bnxt_hwrm_stat_ctx_alloc(struct bnxt *bp,
struct bnxt_cp_ring_info *cpr, unsigned int idx);
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index 28362c9..e6280b6 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -93,6 +93,8 @@ struct ctx_hw_stats64 {
#define HWRM_VNIC_FREE (UINT32_C(0x41))
#define HWRM_VNIC_CFG (UINT32_C(0x42))
#define HWRM_VNIC_RSS_CFG (UINT32_C(0x46))
+#define HWRM_RING_ALLOC (UINT32_C(0x50))
+#define HWRM_RING_FREE (UINT32_C(0x51))
#define HWRM_VNIC_RSS_COS_LB_CTX_ALLOC (UINT32_C(0x70))
#define HWRM_VNIC_RSS_COS_LB_CTX_FREE (UINT32_C(0x71))
#define HWRM_CFA_L2_FILTER_ALLOC (UINT32_C(0x90))
@@ -3184,6 +3186,309 @@ struct hwrm_queue_qportcfg_input {
uint16_t unused_0;
} __attribute__((packed));
+/* hwrm_ring_alloc */
+/*
+ * Description: This command allocates and does basic preparation for a ring.
+ */
+
+/* Input (80 bytes) */
+struct hwrm_ring_alloc_input {
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t req_type;
+
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t cmpl_ring;
+
+ /* This value indicates the command sequence number. */
+ uint16_t seq_id;
+
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t resp_addr;
+
+ /* This bit must be '1' for the Reserved1 field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED1 UINT32_C(0x1)
+ /* This bit must be '1' for the Reserved2 field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED2 UINT32_C(0x2)
+ /* This bit must be '1' for the Reserved3 field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED3 UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the stat_ctx_id_valid field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID UINT32_C(0x8)
+ /* This bit must be '1' for the Reserved4 field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED4 UINT32_C(0x10)
+ /* This bit must be '1' for the max_bw_valid field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID UINT32_C(0x20)
+ uint32_t enables;
+
+ /* Ring Type. */
+ /* Completion Ring (CR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_CMPL (UINT32_C(0x0) << 0)
+ /* TX Ring (TR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX (UINT32_C(0x1) << 0)
+ /* RX Ring (RR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX (UINT32_C(0x2) << 0)
+ uint8_t ring_type;
+
+ uint8_t unused_0;
+ uint16_t unused_1;
+
+ /* This value is a pointer to the page table for the Ring. */
+ uint64_t page_tbl_addr;
+
+ /* First Byte Offset of the first entry in the first page. */
+ uint32_t fbo;
+
+ /*
+ * Actual page size in 2^page_size. The supported range is increments in
+ * powers of 2 from 16 bytes to 1GB. - 4 = 16 B Page size is 16 B. - 12
+ * = 4 KB Page size is 4 KB. - 13 = 8 KB Page size is 8 KB. - 16 = 64 KB
+ * Page size is 64 KB. - 22 = 2 MB Page size is 2 MB. - 23 = 4 MB Page
+ * size is 4 MB. - 31 = 1 GB Page size is 1 GB.
+ */
+ uint8_t page_size;
+
+ /*
+ * This value indicates the depth of page table. For this version of the
+ * specification, value other than 0 or 1 shall be considered as an
+ * invalid value. When the page_tbl_depth = 0, then it is treated as a
+ * special case with the following. 1. FBO and page size fields are not
+ * valid. 2. page_tbl_addr is the physical address of the first element
+ * of the ring.
+ */
+ uint8_t page_tbl_depth;
+
+ uint8_t unused_2;
+ uint8_t unused_3;
+
+ /*
+ * Number of 16B units in the ring. Minimum size for a ring is 16 16B
+ * entries.
+ */
+ uint32_t length;
+
+ /*
+ * Logical ring number for the ring to be allocated. This value
+ * determines the position in the doorbell area where the update to the
+ * ring will be made. For completion rings, this value is also the MSI-X
+ * vector number for the function the completion ring is associated
+ * with.
+ */
+ uint16_t logical_id;
+
+ /*
+ * This field is used only when ring_type is a TX ring. This value
+ * indicates what completion ring the TX ring is associated with.
+ */
+ uint16_t cmpl_ring_id;
+
+ /*
+ * This field is used only when ring_type is a TX ring. This value
+ * indicates what CoS queue the TX ring is associated with.
+ */
+ uint16_t queue_id;
+
+ uint8_t unused_4;
+ uint8_t unused_5;
+
+ /* This field is reserved for the future use. It shall be set to 0. */
+ uint32_t reserved1;
+ /* This field is reserved for the future use. It shall be set to 0. */
+ uint16_t reserved2;
+
+ uint8_t unused_6;
+ uint8_t unused_7;
+ /* This field is reserved for the future use. It shall be set to 0. */
+ uint32_t reserved3;
+
+ /*
+ * This field is used only when ring_type is a TX ring. This input
+ * indicates what statistics context this ring should be associated
+ * with.
+ */
+ uint32_t stat_ctx_id;
+
+ /* This field is reserved for the future use. It shall be set to 0. */
+ uint32_t reserved4;
+
+ /*
+ * This field is used only when ring_type is a TX ring. Maximum BW
+ * allocated to this TX ring in Mbps. The HWRM will translate this value
+ * into byte counter and time interval used for this ring inside the
+ * device.
+ */
+ uint32_t max_bw;
+
+ /*
+ * This field is used only when ring_type is a Completion ring. This
+ * value indicates what interrupt mode should be used on this completion
+ * ring. Note: In the legacy interrupt mode, no more than 16 completion
+ * rings are allowed.
+ */
+ /* Legacy INTA */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_LEGACY (UINT32_C(0x0) << 0)
+ /* Reserved */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_RSVD (UINT32_C(0x1) << 0)
+ /* MSI-X */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX (UINT32_C(0x2) << 0)
+ /* No Interrupt - Polled mode */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL (UINT32_C(0x3) << 0)
+ uint8_t int_mode;
+
+ uint8_t unused_8[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_ring_alloc_output {
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t error_code;
+
+ /* This field returns the type of original request. */
+ uint16_t req_type;
+
+ /* This field provides original sequence number of the command. */
+ uint16_t seq_id;
+
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t resp_len;
+
+ /* Physical number of ring allocated. */
+ uint16_t ring_id;
+
+ /* Logical number of ring allocated. */
+ uint16_t logical_ring_id;
+
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
+/* hwrm_ring_free */
+/*
+ * Description: This command is used to free a ring and associated resources.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_ring_free_input {
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t req_type;
+
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t cmpl_ring;
+
+ /* This value indicates the command sequence number. */
+ uint16_t seq_id;
+
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint64_t resp_addr;
+
+ /* Ring Type. */
+ /* Completion Ring (CR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_CMPL (UINT32_C(0x0) << 0)
+ /* TX Ring (TR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_TX (UINT32_C(0x1) << 0)
+ /* RX Ring (RR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_RX (UINT32_C(0x2) << 0)
+ uint8_t ring_type;
+
+ uint8_t unused_0;
+
+ /* Physical number of ring allocated. */
+ uint16_t ring_id;
+
+ uint32_t unused_1;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_ring_free_output {
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t error_code;
+
+ /* This field returns the type of original request. */
+ uint16_t req_type;
+
+ /* This field provides original sequence number of the command. */
+ uint16_t seq_id;
+
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint16_t resp_len;
+
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __attribute__((packed));
+
/* hwrm_stat_ctx_alloc */
/*
* Description: This command allocates and does basic preparation for a stat
--
1.9.1
next prev parent reply other threads:[~2016-06-14 22:57 UTC|newest]
Thread overview: 132+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-06 22:08 [dpdk-dev] [PATCH v4 01/39] bnxt: new driver for Broadcom NetXtreme-C devices Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 02/39] bnxt: add HWRM init code Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 03/39] bnxt: add driver register/unregister support Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 04/39] bnxt: add dev infos get operation Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 05/39] bnxt: add dev configure operation Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 06/39] bnxt: add vnic functions and structs Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 07/39] bnxt: declare ring structs and free() func Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 08/39] bnxt: add completion ring support Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 09/39] bnxt: add L2 filter alloc/init/free Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 10/39] bnxt: add Tx queue operations (nonfunctional) Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 11/39] bnxt: add Rx queue create/destroy operations Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 12/39] bnxt: Add statistics operations Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 13/39] bnxt: initial Tx code implementation Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 14/39] bnxt: initial Rx " Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 15/39] bnxt: Code to alloc/free ring Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 16/39] bnxt: add HWRM function reset command Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 17/39] bnxt: add HWRM vnic alloc function Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 18/39] bnxt: add HWRM vnic free function Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 19/39] bnxt: add HWRM vnic configure function Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 20/39] bnxt: add API to allow configuration of vnic Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 21/39] bnxt: add HWRM API to configure RSS Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 22/39] bnxt: add API for L2 Rx mask set/clear functions Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 23/39] bnxt: add HWRM stats context allocation Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 24/39] bnxt: add HWRM ring alloc/free functions Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 25/39] bnxt: add ring group " Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 26/39] bnxt: add HWRM stat context free function Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 27/39] bnxt: Add HWRM API to set and clear filters Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 28/39] bnxt: add ring alloc, free and group init Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 29/39] bnxt: add HWRM port PHY config call and helpers Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 30/39] bnxt: add start/stop/link update operations Stephen Hurd
2016-06-08 10:02 ` Bruce Richardson
2016-06-08 10:41 ` Bruce Richardson
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 31/39] bnxt: add promiscuous enable/disable operations Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 32/39] bnxt: add all multicast " Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 33/39] bnxt: free memory in close operation Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 34/39] bnxt: add MAC address add/remove dev_ops Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 35/39] bnxt: add set link up/down operations Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 36/39] bnxt: add reta update/query operations Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 37/39] bnxt: add RSS device operations Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 38/39] bnxt: add flow control operations Stephen Hurd
2016-06-06 22:08 ` [dpdk-dev] [PATCH v4 39/39] bnxt: Replace bnxt_ring_struct with bnxt_ring Stephen Hurd
2016-06-07 6:25 ` [dpdk-dev] [PATCH v4 01/39] bnxt: new driver for Broadcom NetXtreme-C devices Thomas Monjalon
2016-06-08 10:31 ` Bruce Richardson
2016-06-08 10:21 ` Bruce Richardson
2016-06-08 10:41 ` Bruce Richardson
2016-06-14 13:14 ` Bruce Richardson
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 01/38] " Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 02/38] bnxt: add HWRM init code Stephen Hurd
2016-06-15 16:25 ` Ferruh Yigit
2016-06-15 20:28 ` Stephen Hurd
2016-06-16 9:46 ` Bruce Richardson
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 03/38] bnxt: add driver register/unregister support Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 04/38] bnxt: add dev infos get operation Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 05/38] bnxt: add dev configure operation Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 06/38] bnxt: add vnic functions and structs Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 07/38] bnxt: declare generic ring structs and free() func Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 08/38] bnxt: add completion ring support Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 09/38] bnxt: add L2 filter alloc/init/free Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 10/38] bnxt: add Tx queue operations (nonfunctional) Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 11/38] bnxt: add Rx queue create/destroy operations Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 12/38] bnxt: add statistics operations Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 13/38] bnxt: add initial Tx code implementation Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 14/38] bnxt: add initial Rx " Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 15/38] bnxt: add code to alloc/free Tx Rx and cmpl rings Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 16/38] bnxt: add HWRM function reset command Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 17/38] bnxt: add HWRM vnic alloc function Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 18/38] bnxt: add HWRM vnic free function Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 19/38] bnxt: add HWRM vnic configure function Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 20/38] bnxt: add API to allow configuration of vnic Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 21/38] bnxt: add HWRM API to configure RSS Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 22/38] bnxt: add API for L2 Rx mask set/clear functions Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 23/38] bnxt: add HWRM API for stats context allocation Stephen Hurd
2016-06-14 22:55 ` Stephen Hurd [this message]
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 25/38] bnxt: add ring group alloc/free functions Stephen Hurd
2016-06-14 22:55 ` [dpdk-dev] [PATCH v5 26/38] bnxt: add HWRM stat context free function Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 27/38] bnxt: add HWRM API to set and clear filters Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 28/38] bnxt: allocate and free all HWRM rings and groups Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 29/38] bnxt: add HWRM port PHY config call and helpers Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 30/38] bnxt: add start/stop/link update operations Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 31/38] bnxt: add promiscuous enable/disable operations Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 32/38] bnxt: add all multicast " Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 33/38] bnxt: free memory in close operation Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 34/38] bnxt: add MAC address add/remove dev ops Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 35/38] bnxt: add set link up/down operations Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 36/38] bnxt: add reta update/query operations Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 37/38] bnxt: add RSS device operations Stephen Hurd
2016-06-14 22:56 ` [dpdk-dev] [PATCH v5 38/38] bnxt: add flow control operations Stephen Hurd
2016-06-15 15:28 ` [dpdk-dev] [PATCH v5 01/38] bnxt: new driver for Broadcom NetXtreme-C devices Bruce Richardson
2016-06-15 15:30 ` Bruce Richardson
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 00/38] new bnxt poll mode driver library Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 01/38] bnxt: new driver for Broadcom NetXtreme-C devices Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 02/38] bnxt: add HWRM init code Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 03/38] bnxt: add driver register/unregister support Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 04/38] bnxt: add dev infos get operation Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 05/38] bnxt: add dev configure operation Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 06/38] bnxt: add vnic functions and structs Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 07/38] bnxt: declare generic ring structs and free() func Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 08/38] bnxt: add completion ring support Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 09/38] bnxt: add L2 filter alloc/init/free Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 10/38] bnxt: add Tx queue operations (nonfunctional) Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 11/38] bnxt: add Rx queue create/destroy operations Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 12/38] bnxt: add statistics operations Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 13/38] bnxt: add initial Tx code implementation Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 14/38] bnxt: add initial Rx " Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 15/38] bnxt: add code to alloc/free Tx Rx and cmpl rings Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 16/38] bnxt: add HWRM function reset command Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 17/38] bnxt: add HWRM vnic alloc function Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 18/38] bnxt: add HWRM vnic free function Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 19/38] bnxt: add HWRM vnic configure function Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 20/38] bnxt: add API to allow configuration of vnic Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 21/38] bnxt: add HWRM API to configure RSS Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 22/38] bnxt: add API for L2 Rx mask set/clear functions Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 23/38] bnxt: add HWRM API for stats context allocation Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 24/38] bnxt: add HWRM ring alloc/free functions Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 25/38] bnxt: add ring group " Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 26/38] bnxt: add HWRM stat context free function Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 27/38] bnxt: add HWRM API to set and clear filters Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 28/38] bnxt: allocate and free all HWRM rings and groups Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 29/38] bnxt: add HWRM port PHY config call and helpers Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 30/38] bnxt: add start/stop/link update operations Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 31/38] bnxt: add promiscuous enable/disable operations Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 32/38] bnxt: add all multicast " Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 33/38] bnxt: free memory in close operation Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 34/38] bnxt: add MAC address add/remove dev ops Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 35/38] bnxt: add set link up/down operations Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 36/38] bnxt: add reta update/query operations Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 37/38] bnxt: add RSS device operations Stephen Hurd
2016-06-15 21:23 ` [dpdk-dev] [PATCH v6 38/38] bnxt: add flow control operations Stephen Hurd
2016-06-16 14:24 ` [dpdk-dev] [PATCH v6 00/38] new bnxt poll mode driver library Bruce Richardson
2016-06-16 18:51 ` Ajit Khaparde
2016-06-21 14:25 ` Ajit Khaparde
2016-06-21 14:46 ` Bruce Richardson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465944971-113413-24-git-send-email-stephen.hurd@broadcom.com \
--to=stephen.hurd@broadcom.com \
--cc=ajit.khaparde@broadcom.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).