DPDK patches and discussions
 help / color / mirror / Atom feed
From: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
To: dev@dpdk.org
Cc: Ferruh Yigit <ferruh.yigit@intel.com>,
	Yaacov Hazan <yaacovh@mellanox.com>,
	Adrien Mazarguil <adrien.mazarguil@6wind.com>
Subject: [dpdk-dev] [PATCH v4 17/25] mlx5: add support for inline send
Date: Wed, 22 Jun 2016 11:05:47 +0200	[thread overview]
Message-ID: <1466586355-30777-18-git-send-email-nelio.laranjeiro@6wind.com> (raw)
In-Reply-To: <1466586355-30777-1-git-send-email-nelio.laranjeiro@6wind.com>

From: Yaacov Hazan <yaacovh@mellanox.com>

Implement send inline feature which copies packet data directly into WQEs
for improved latency. The maximum packet size and the minimum number of Tx
queues to qualify for inline send are user-configurable.

This feature is effective when HW causes a performance bottleneck.

Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
---
 doc/guides/nics/mlx5.rst       |  17 +++
 drivers/net/mlx5/mlx5.c        |  13 ++
 drivers/net/mlx5/mlx5.h        |   2 +
 drivers/net/mlx5/mlx5_ethdev.c |   5 +
 drivers/net/mlx5/mlx5_rxtx.c   | 271 +++++++++++++++++++++++++++++++++++++++++
 drivers/net/mlx5/mlx5_rxtx.h   |   2 +
 drivers/net/mlx5/mlx5_txq.c    |   4 +
 7 files changed, 314 insertions(+)

diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index 756153b..9ada221 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -154,6 +154,23 @@ Run-time configuration
   allows to save PCI bandwidth and improve performance at the cost of a
   slightly higher CPU usage.  Enabled by default.
 
+- ``txq_inline`` parameter [int]
+
+  Amount of data to be inlined during TX operations. Improves latency.
+  Can improve PPS performance when PCI back pressure is detected and may be
+  useful for scenarios involving heavy traffic on many queues.
+
+  It is not enabled by default (set to 0) since the additional software
+  logic necessary to handle this mode can lower performance when back
+  pressure is not expected.
+
+- ``txqs_min_inline`` parameter [int]
+
+  Enable inline send only when the number of TX queues is greater or equal
+  to this value.
+
+  This option should be used in combination with ``txq_inline`` above.
+
 Prerequisites
 -------------
 
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index ec4e0b6..49c7ae8 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -72,6 +72,13 @@
 /* Device parameter to enable RX completion queue compression. */
 #define MLX5_RXQ_CQE_COMP_EN "rxq_cqe_comp_en"
 
+/* Device parameter to configure inline send. */
+#define MLX5_TXQ_INLINE "txq_inline"
+
+/* Device parameter to configure the number of TX queues threshold for
+ * enabling inline send. */
+#define MLX5_TXQS_MIN_INLINE "txqs_min_inline"
+
 /**
  * Retrieve integer value from environment variable.
  *
@@ -269,6 +276,10 @@ mlx5_args_check(const char *key, const char *val, void *opaque)
 	}
 	if (strcmp(MLX5_RXQ_CQE_COMP_EN, key) == 0)
 		priv->cqe_comp = !!tmp;
+	else if (strcmp(MLX5_TXQ_INLINE, key) == 0)
+		priv->txq_inline = tmp;
+	else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0)
+		priv->txqs_inline = tmp;
 	else {
 		WARN("%s: unknown parameter", key);
 		return -EINVAL;
@@ -292,6 +303,8 @@ mlx5_args(struct priv *priv, struct rte_devargs *devargs)
 {
 	static const char *params[] = {
 		MLX5_RXQ_CQE_COMP_EN,
+		MLX5_TXQ_INLINE,
+		MLX5_TXQS_MIN_INLINE,
 	};
 	struct rte_kvargs *kvlist;
 	int ret = 0;
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 8f5a6df..3a86609 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -113,6 +113,8 @@ struct priv {
 	unsigned int mps:1; /* Whether multi-packet send is supported. */
 	unsigned int cqe_comp:1; /* Whether CQE compression is enabled. */
 	unsigned int pending_alarm:1; /* An alarm is pending. */
+	unsigned int txq_inline; /* Maximum packet size for inlining. */
+	unsigned int txqs_inline; /* Queue number threshold for inlining. */
 	/* RX/TX queues. */
 	unsigned int rxqs_n; /* RX queues array size. */
 	unsigned int txqs_n; /* TX queues array size. */
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index 47e64b2..aeea4ff 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -1318,6 +1318,11 @@ void
 priv_select_tx_function(struct priv *priv)
 {
 	priv->dev->tx_pkt_burst = mlx5_tx_burst;
+	if (priv->txq_inline && (priv->txqs_n >= priv->txqs_inline)) {
+		priv->dev->tx_pkt_burst = mlx5_tx_burst_inline;
+		DEBUG("selected inline TX function (%u >= %u queues)",
+		      priv->txqs_n, priv->txqs_inline);
+	}
 }
 
 /**
diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c
index d56c9e9..43fe532 100644
--- a/drivers/net/mlx5/mlx5_rxtx.c
+++ b/drivers/net/mlx5/mlx5_rxtx.c
@@ -374,6 +374,139 @@ mlx5_wqe_write_vlan(struct txq *txq, volatile union mlx5_wqe *wqe,
 }
 
 /**
+ * Write a inline WQE.
+ *
+ * @param txq
+ *   Pointer to TX queue structure.
+ * @param wqe
+ *   Pointer to the WQE to fill.
+ * @param addr
+ *   Buffer data address.
+ * @param length
+ *   Packet length.
+ * @param lkey
+ *   Memory region lkey.
+ */
+static inline void
+mlx5_wqe_write_inline(struct txq *txq, volatile union mlx5_wqe *wqe,
+		      uintptr_t addr, uint32_t length)
+{
+	uint32_t size;
+	uint16_t wqe_cnt = txq->wqe_n - 1;
+	uint16_t wqe_ci = txq->wqe_ci + 1;
+
+	/* Copy the first 16 bytes into inline header. */
+	rte_memcpy((void *)(uintptr_t)wqe->inl.eseg.inline_hdr_start,
+		   (void *)(uintptr_t)addr,
+		   MLX5_ETH_INLINE_HEADER_SIZE);
+	addr += MLX5_ETH_INLINE_HEADER_SIZE;
+	length -= MLX5_ETH_INLINE_HEADER_SIZE;
+	size = 3 + ((4 + length + 15) / 16);
+	wqe->inl.byte_cnt = htonl(length | MLX5_INLINE_SEG);
+	rte_memcpy((void *)(uintptr_t)&wqe->inl.data[0],
+		   (void *)addr, MLX5_WQE64_INL_DATA);
+	addr += MLX5_WQE64_INL_DATA;
+	length -= MLX5_WQE64_INL_DATA;
+	while (length) {
+		volatile union mlx5_wqe *wqe_next =
+			&(*txq->wqes)[wqe_ci & wqe_cnt];
+		uint32_t copy_bytes = (length > sizeof(*wqe)) ?
+				      sizeof(*wqe) :
+				      length;
+
+		rte_mov64((uint8_t *)(uintptr_t)&wqe_next->data[0],
+			  (uint8_t *)addr);
+		addr += copy_bytes;
+		length -= copy_bytes;
+		++wqe_ci;
+	}
+	assert(size < 64);
+	wqe->inl.ctrl.data[0] = htonl((txq->wqe_ci << 8) | MLX5_OPCODE_SEND);
+	wqe->inl.ctrl.data[1] = htonl(txq->qp_num_8s | size);
+	wqe->inl.ctrl.data[3] = 0;
+	wqe->inl.eseg.rsvd0 = 0;
+	wqe->inl.eseg.rsvd1 = 0;
+	wqe->inl.eseg.mss = 0;
+	wqe->inl.eseg.rsvd2 = 0;
+	wqe->inl.eseg.inline_hdr_sz = htons(MLX5_ETH_INLINE_HEADER_SIZE);
+	/* Increment consumer index. */
+	txq->wqe_ci = wqe_ci;
+}
+
+/**
+ * Write a inline WQE with VLAN.
+ *
+ * @param txq
+ *   Pointer to TX queue structure.
+ * @param wqe
+ *   Pointer to the WQE to fill.
+ * @param addr
+ *   Buffer data address.
+ * @param length
+ *   Packet length.
+ * @param lkey
+ *   Memory region lkey.
+ * @param vlan_tci
+ *   VLAN field to insert in packet.
+ */
+static inline void
+mlx5_wqe_write_inline_vlan(struct txq *txq, volatile union mlx5_wqe *wqe,
+			   uintptr_t addr, uint32_t length, uint16_t vlan_tci)
+{
+	uint32_t size;
+	uint32_t wqe_cnt = txq->wqe_n - 1;
+	uint16_t wqe_ci = txq->wqe_ci + 1;
+	uint32_t vlan = htonl(0x81000000 | vlan_tci);
+
+	/*
+	 * Copy 12 bytes of source & destination MAC address.
+	 * Copy 4 bytes of VLAN.
+	 * Copy 2 bytes of Ether type.
+	 */
+	rte_memcpy((uint8_t *)(uintptr_t)wqe->inl.eseg.inline_hdr_start,
+		   (uint8_t *)addr, 12);
+	rte_memcpy((uint8_t *)(uintptr_t)wqe->inl.eseg.inline_hdr_start + 12,
+		   &vlan, sizeof(vlan));
+	rte_memcpy((uint8_t *)(uintptr_t)wqe->inl.eseg.inline_hdr_start + 16,
+		   ((uint8_t *)addr + 12), 2);
+	addr += MLX5_ETH_VLAN_INLINE_HEADER_SIZE - sizeof(vlan);
+	length -= MLX5_ETH_VLAN_INLINE_HEADER_SIZE - sizeof(vlan);
+	size = (sizeof(wqe->inl.ctrl.ctrl) +
+		sizeof(wqe->inl.eseg) +
+		sizeof(wqe->inl.byte_cnt) +
+		length + 15) / 16;
+	wqe->inl.byte_cnt = htonl(length | MLX5_INLINE_SEG);
+	rte_memcpy((void *)(uintptr_t)&wqe->inl.data[0],
+		   (void *)addr, MLX5_WQE64_INL_DATA);
+	addr += MLX5_WQE64_INL_DATA;
+	length -= MLX5_WQE64_INL_DATA;
+	while (length) {
+		volatile union mlx5_wqe *wqe_next =
+			&(*txq->wqes)[wqe_ci & wqe_cnt];
+		uint32_t copy_bytes = (length > sizeof(*wqe)) ?
+				      sizeof(*wqe) :
+				      length;
+
+		rte_mov64((uint8_t *)(uintptr_t)&wqe_next->data[0],
+			  (uint8_t *)addr);
+		addr += copy_bytes;
+		length -= copy_bytes;
+		++wqe_ci;
+	}
+	assert(size < 64);
+	wqe->inl.ctrl.data[0] = htonl((txq->wqe_ci << 8) | MLX5_OPCODE_SEND);
+	wqe->inl.ctrl.data[1] = htonl(txq->qp_num_8s | size);
+	wqe->inl.ctrl.data[3] = 0;
+	wqe->inl.eseg.rsvd0 = 0;
+	wqe->inl.eseg.rsvd1 = 0;
+	wqe->inl.eseg.mss = 0;
+	wqe->inl.eseg.rsvd2 = 0;
+	wqe->inl.eseg.inline_hdr_sz = htons(MLX5_ETH_VLAN_INLINE_HEADER_SIZE);
+	/* Increment consumer index. */
+	txq->wqe_ci = wqe_ci;
+}
+
+/**
  * Ring TX queue doorbell.
  *
  * @param txq
@@ -415,6 +548,23 @@ tx_prefetch_cqe(struct txq *txq, uint16_t ci)
 }
 
 /**
+ * Prefetch a WQE.
+ *
+ * @param txq
+ *   Pointer to TX queue structure.
+ * @param  wqe_ci
+ *   WQE consumer index.
+ */
+static inline void
+tx_prefetch_wqe(struct txq *txq, uint16_t ci)
+{
+	volatile union mlx5_wqe *wqe;
+
+	wqe = &(*txq->wqes)[ci & (txq->wqe_n - 1)];
+	rte_prefetch0(wqe);
+}
+
+/**
  * DPDK callback for TX.
  *
  * @param dpdk_txq
@@ -525,6 +675,127 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
 }
 
 /**
+ * DPDK callback for TX with inline support.
+ *
+ * @param dpdk_txq
+ *   Generic pointer to TX queue structure.
+ * @param[in] pkts
+ *   Packets to transmit.
+ * @param pkts_n
+ *   Number of packets in array.
+ *
+ * @return
+ *   Number of packets successfully transmitted (<= pkts_n).
+ */
+uint16_t
+mlx5_tx_burst_inline(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
+{
+	struct txq *txq = (struct txq *)dpdk_txq;
+	uint16_t elts_head = txq->elts_head;
+	const unsigned int elts_n = txq->elts_n;
+	unsigned int i;
+	unsigned int max;
+	unsigned int comp;
+	volatile union mlx5_wqe *wqe;
+	struct rte_mbuf *buf;
+	unsigned int max_inline = txq->max_inline;
+
+	if (unlikely(!pkts_n))
+		return 0;
+	buf = pkts[0];
+	/* Prefetch first packet cacheline. */
+	tx_prefetch_cqe(txq, txq->cq_ci);
+	tx_prefetch_cqe(txq, txq->cq_ci + 1);
+	rte_prefetch0(buf);
+	/* Start processing. */
+	txq_complete(txq);
+	max = (elts_n - (elts_head - txq->elts_tail));
+	if (max > elts_n)
+		max -= elts_n;
+	assert(max >= 1);
+	assert(max <= elts_n);
+	/* Always leave one free entry in the ring. */
+	--max;
+	if (max == 0)
+		return 0;
+	if (max > pkts_n)
+		max = pkts_n;
+	for (i = 0; (i != max); ++i) {
+		unsigned int elts_head_next = (elts_head + 1) & (elts_n - 1);
+		uintptr_t addr;
+		uint32_t length;
+		uint32_t lkey;
+
+		wqe = &(*txq->wqes)[txq->wqe_ci & (txq->wqe_n - 1)];
+		tx_prefetch_wqe(txq, txq->wqe_ci);
+		tx_prefetch_wqe(txq, txq->wqe_ci + 1);
+		if (i + 1 < max)
+			rte_prefetch0(pkts[i + 1]);
+		/* Should we enable HW CKSUM offload */
+		if (buf->ol_flags &
+		    (PKT_TX_IP_CKSUM | PKT_TX_TCP_CKSUM | PKT_TX_UDP_CKSUM)) {
+			wqe->inl.eseg.cs_flags =
+				MLX5_ETH_WQE_L3_CSUM |
+				MLX5_ETH_WQE_L4_CSUM;
+		} else
+			wqe->inl.eseg.cs_flags = 0;
+		/* Retrieve buffer information. */
+		addr = rte_pktmbuf_mtod(buf, uintptr_t);
+		length = DATA_LEN(buf);
+		/* Update element. */
+		(*txq->elts)[elts_head] = buf;
+		/* Prefetch next buffer data. */
+		if (i + 1 < max)
+			rte_prefetch0(rte_pktmbuf_mtod(pkts[i + 1],
+						       volatile void *));
+		if (length <= max_inline) {
+			if (buf->ol_flags & PKT_TX_VLAN_PKT)
+				mlx5_wqe_write_inline_vlan(txq, wqe,
+							   addr, length,
+							   buf->vlan_tci);
+			else
+				mlx5_wqe_write_inline(txq, wqe, addr, length);
+		} else {
+			/* Retrieve Memory Region key for this memory pool. */
+			lkey = txq_mp2mr(txq, txq_mb2mp(buf));
+			if (buf->ol_flags & PKT_TX_VLAN_PKT)
+				mlx5_wqe_write_vlan(txq, wqe, addr, length,
+						    lkey, buf->vlan_tci);
+			else
+				mlx5_wqe_write(txq, wqe, addr, length, lkey);
+		}
+		wqe->inl.ctrl.data[2] = 0;
+		elts_head = elts_head_next;
+		buf = pkts[i + 1];
+#ifdef MLX5_PMD_SOFT_COUNTERS
+		/* Increment sent bytes counter. */
+		txq->stats.obytes += length;
+#endif
+	}
+	/* Take a shortcut if nothing must be sent. */
+	if (unlikely(i == 0))
+		return 0;
+	/* Check whether completion threshold has been reached. */
+	comp = txq->elts_comp + i;
+	if (comp >= MLX5_TX_COMP_THRESH) {
+		/* Request completion on last WQE. */
+		wqe->inl.ctrl.data[2] = htonl(8);
+		/* Save elts_head in unused "immediate" field of WQE. */
+		wqe->inl.ctrl.data[3] = elts_head;
+		txq->elts_comp = 0;
+	} else
+		txq->elts_comp = comp;
+#ifdef MLX5_PMD_SOFT_COUNTERS
+	/* Increment sent packets counter. */
+	txq->stats.opackets += i;
+#endif
+	/* Ring QP doorbell. */
+	mlx5_tx_dbrec(txq);
+	txq->elts_head = elts_head;
+	return i;
+}
+
+/**
  * Translate RX completion flags to packet type.
  *
  * @param[in] cqe
diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h
index f900e65..3c83148 100644
--- a/drivers/net/mlx5/mlx5_rxtx.h
+++ b/drivers/net/mlx5/mlx5_rxtx.h
@@ -246,6 +246,7 @@ struct txq {
 	uint16_t wqe_n; /* Number of WQ elements. */
 	uint16_t bf_offset; /* Blueflame offset. */
 	uint16_t bf_buf_size; /* Blueflame size. */
+	uint16_t max_inline; /* Maximum size to inline in a WQE. */
 	uint32_t qp_num_8s; /* QP number shifted by 8. */
 	volatile struct mlx5_cqe (*cqes)[]; /* Completion queue. */
 	volatile union mlx5_wqe (*wqes)[]; /* Work queue. */
@@ -310,6 +311,7 @@ uint16_t mlx5_tx_burst_secondary_setup(void *, struct rte_mbuf **, uint16_t);
 /* mlx5_rxtx.c */
 
 uint16_t mlx5_tx_burst(void *, struct rte_mbuf **, uint16_t);
+uint16_t mlx5_tx_burst_inline(void *, struct rte_mbuf **, uint16_t);
 uint16_t mlx5_rx_burst(void *, struct rte_mbuf **, uint16_t);
 uint16_t removed_tx_burst(void *, struct rte_mbuf **, uint16_t);
 uint16_t removed_rx_burst(void *, struct rte_mbuf **, uint16_t);
diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c
index 7b2dc7c..6a4a96e 100644
--- a/drivers/net/mlx5/mlx5_txq.c
+++ b/drivers/net/mlx5/mlx5_txq.c
@@ -332,6 +332,10 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl,
 		.comp_mask = (IBV_EXP_QP_INIT_ATTR_PD |
 			      IBV_EXP_QP_INIT_ATTR_RES_DOMAIN),
 	};
+	if (priv->txq_inline && priv->txqs_n >= priv->txqs_inline) {
+		tmpl.txq.max_inline = priv->txq_inline;
+		attr.init.cap.max_inline_data = tmpl.txq.max_inline;
+	}
 	tmpl.qp = ibv_exp_create_qp(priv->ctx, &attr.init);
 	if (tmpl.qp == NULL) {
 		ret = (errno ? errno : EINVAL);
-- 
2.1.4

  parent reply	other threads:[~2016-06-22  9:06 UTC|newest]

Thread overview: 211+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-08  9:47 [dpdk-dev] [PATCH 00/24] Refactor mlx5 to improve performance Nelio Laranjeiro
2016-06-08  9:47 ` [dpdk-dev] [PATCH 01/24] mlx5: split memory registration function for better performance Nelio Laranjeiro
2016-06-08  9:47 ` [dpdk-dev] [PATCH 02/24] mlx5: remove TX gather support Nelio Laranjeiro
2016-06-08  9:47 ` [dpdk-dev] [PATCH 03/24] mlx5: remove RX scatter support Nelio Laranjeiro
2016-06-08  9:47 ` [dpdk-dev] [PATCH 04/24] mlx5: remove configuration variable for maximum number of segments Nelio Laranjeiro
2016-06-08  9:47 ` [dpdk-dev] [PATCH 05/24] mlx5: remove inline TX support Nelio Laranjeiro
2016-06-08  9:47 ` [dpdk-dev] [PATCH 06/24] mlx5: split TX queue structure Nelio Laranjeiro
2016-06-08  9:47 ` [dpdk-dev] [PATCH 07/24] mlx5: split RX " Nelio Laranjeiro
2016-06-08  9:47 ` [dpdk-dev] [PATCH 08/24] mlx5: update prerequisites for upcoming enhancements Nelio Laranjeiro
2016-06-08  9:47 ` [dpdk-dev] [PATCH 09/24] mlx5: add definitions for data path without Verbs Nelio Laranjeiro
2016-06-08  9:47 ` [dpdk-dev] [PATCH 10/24] mlx5: add support for configuration through kvargs Nelio Laranjeiro
2016-06-08  9:47 ` [dpdk-dev] [PATCH 11/24] mlx5: add TX/RX burst function selection wrapper Nelio Laranjeiro
2016-06-08  9:47 ` [dpdk-dev] [PATCH 12/24] mlx5: refactor RX data path Nelio Laranjeiro
2016-06-08  9:48 ` [dpdk-dev] [PATCH 13/24] mlx5: refactor TX " Nelio Laranjeiro
2016-06-08  9:48 ` [dpdk-dev] [PATCH 14/24] mlx5: handle RX CQE compression Nelio Laranjeiro
2016-06-08  9:48 ` [dpdk-dev] [PATCH 15/24] mlx5: replace countdown with threshold for TX completions Nelio Laranjeiro
2016-06-08  9:48 ` [dpdk-dev] [PATCH 16/24] mlx5: add support for inline send Nelio Laranjeiro
2016-06-08  9:48 ` [dpdk-dev] [PATCH 17/24] mlx5: add support for multi-packet send Nelio Laranjeiro
2016-06-08  9:48 ` [dpdk-dev] [PATCH 18/24] mlx5: add debugging information about TX queues capabilities Nelio Laranjeiro
2016-06-08  9:48 ` [dpdk-dev] [PATCH 19/24] mlx5: check remaining space while processing TX burst Nelio Laranjeiro
2016-06-08  9:48 ` [dpdk-dev] [PATCH 20/24] mlx5: resurrect TX gather support Nelio Laranjeiro
2016-06-08  9:48 ` [dpdk-dev] [PATCH 21/24] mlx5: work around spurious compilation errors Nelio Laranjeiro
2016-06-08  9:48 ` [dpdk-dev] [PATCH 22/24] mlx5: remove redundant RX queue initialization code Nelio Laranjeiro
2016-06-08  9:48 ` [dpdk-dev] [PATCH 23/24] mlx5: make RX queue reinitialization safer Nelio Laranjeiro
2016-06-08  9:48 ` [dpdk-dev] [PATCH 24/24] mlx5: resurrect RX scatter support Nelio Laranjeiro
2016-06-13 18:50 ` [dpdk-dev] [PATCH 00/24] Refactor mlx5 to improve performance Javier Blazquez
2016-06-14  6:57   ` Nélio Laranjeiro
2016-06-17 16:09 ` Ferruh Yigit
2016-06-20  7:38   ` Nélio Laranjeiro
2016-06-20 15:03     ` Ferruh Yigit
2016-06-20 15:11       ` Nélio Laranjeiro
2016-06-20 16:10 ` [dpdk-dev] [PATCH v2 00/25] " Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 01/25] drivers: fix PCI class id support Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 02/25] mlx5: split memory registration function Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 03/25] mlx5: remove Tx gather support Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 04/25] mlx5: remove Rx scatter support Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 05/25] mlx5: remove configuration variable Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 06/25] mlx5: remove inline Tx support Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 07/25] mlx5: split Tx queue structure Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 08/25] mlx5: split Rx " Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 09/25] mlx5: update prerequisites for upcoming enhancements Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 10/25] mlx5: add definitions for data path without Verbs Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 11/25] mlx5: add support for configuration through kvargs Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 12/25] mlx5: add Tx/Rx burst function selection wrapper Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 13/25] mlx5: refactor Rx data path Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 14/25] mlx5: refactor Tx " Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 15/25] mlx5: handle Rx CQE compression Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 16/25] mlx5: replace countdown with threshold for Tx completions Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 17/25] mlx5: add support for inline send Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 18/25] mlx5: add support for multi-packet send Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 19/25] mlx5: add debugging information about Tx queues capabilities Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 20/25] mlx5: check remaining space while processing Tx burst Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 21/25] mlx5: resurrect Tx gather support Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 22/25] mlx5: work around spurious compilation errors Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 23/25] mlx5: remove redundant Rx queue initialization code Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 24/25] mlx5: make Rx queue reinitialization safer Nelio Laranjeiro
2016-06-20 16:10   ` [dpdk-dev] [PATCH v2 25/25] mlx5: resurrect Rx scatter support Nelio Laranjeiro
2016-06-20 17:01   ` [dpdk-dev] [PATCH v2 00/25] Refactor mlx5 to improve performance Ferruh Yigit
2016-06-21  6:44     ` Nélio Laranjeiro
2016-06-21  7:23 ` [dpdk-dev] [PATCH v3 " Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 01/25] drivers: fix PCI class id support Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 02/25] mlx5: split memory registration function Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 03/25] mlx5: remove Tx gather support Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 04/25] mlx5: remove Rx scatter support Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 05/25] mlx5: remove configuration variable Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 06/25] mlx5: remove inline Tx support Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 07/25] mlx5: split Tx queue structure Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 08/25] mlx5: split Rx " Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 09/25] mlx5: update prerequisites for upcoming enhancements Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 10/25] mlx5: add definitions for data path without Verbs Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 11/25] mlx5: add support for configuration through kvargs Nelio Laranjeiro
2016-06-21 16:42     ` Ferruh Yigit
2016-06-22  7:30       ` Nélio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 12/25] mlx5: add Tx/Rx burst function selection wrapper Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 13/25] mlx5: refactor Rx data path Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 14/25] mlx5: refactor Tx " Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 15/25] mlx5: handle Rx CQE compression Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 16/25] mlx5: replace countdown with threshold for Tx completions Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 17/25] mlx5: add support for inline send Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 18/25] mlx5: add support for multi-packet send Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 19/25] mlx5: add debugging information about Tx queues capabilities Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 20/25] mlx5: check remaining space while processing Tx burst Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 21/25] mlx5: resurrect Tx gather support Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 22/25] mlx5: work around spurious compilation errors Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 23/25] mlx5: remove redundant Rx queue initialization code Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 24/25] mlx5: make Rx queue reinitialization safer Nelio Laranjeiro
2016-06-21  7:23   ` [dpdk-dev] [PATCH v3 25/25] mlx5: resurrect Rx scatter support Nelio Laranjeiro
2016-06-21  7:43   ` [dpdk-dev] [PATCH v3 00/25] Refactor mlx5 to improve performance Yuanhan Liu
2016-06-21  8:00     ` Nélio Laranjeiro
2016-06-21  8:05       ` Yuanhan Liu
2016-06-21  8:49         ` Nélio Laranjeiro
2016-06-21 10:44     ` Ferruh Yigit
2016-06-21 12:26       ` Thomas Monjalon
2016-06-21 16:42   ` Ferruh Yigit
2016-06-22  8:20     ` Adrien Mazarguil
2016-06-22  9:19       ` Bruce Richardson
2016-06-22  9:30         ` Adrien Mazarguil
2016-06-23 15:14           ` Adrien Mazarguil
2016-06-22  9:05   ` [dpdk-dev] [PATCH " Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 01/25] drivers: fix PCI class id support Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 02/25] mlx5: split memory registration function Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 03/25] mlx5: remove Tx gather support Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 04/25] mlx5: remove Rx scatter support Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 05/25] mlx5: remove configuration variable Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 06/25] mlx5: remove inline Tx support Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 07/25] mlx5: split Tx queue structure Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 08/25] mlx5: split Rx " Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 09/25] mlx5: update prerequisites for upcoming enhancements Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 10/25] mlx5: add definitions for data path without Verbs Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 11/25] mlx5: add support for configuration through kvargs Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 12/25] mlx5: add Tx/Rx burst function selection wrapper Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 13/25] mlx5: refactor Rx data path Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 14/25] mlx5: refactor Tx " Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 15/25] mlx5: handle Rx CQE compression Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 16/25] mlx5: replace countdown with threshold for Tx completions Nelio Laranjeiro
2016-06-22  9:05     ` Nelio Laranjeiro [this message]
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 18/25] mlx5: add support for multi-packet send Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 19/25] mlx5: add debugging information about Tx queues capabilities Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 20/25] mlx5: check remaining space while processing Tx burst Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 21/25] mlx5: resurrect Tx gather support Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 22/25] mlx5: work around spurious compilation errors Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 23/25] mlx5: remove redundant Rx queue initialization code Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 24/25] mlx5: make Rx queue reinitialization safer Nelio Laranjeiro
2016-06-22  9:05     ` [dpdk-dev] [PATCH v4 25/25] mlx5: resurrect Rx scatter support Nelio Laranjeiro
2016-06-23 16:52     ` [dpdk-dev] [PATCH v5 00/25] Refactor mlx5 to improve performance Nelio Laranjeiro
2016-06-23 16:52       ` [dpdk-dev] [PATCH v5 01/25] drivers: fix PCI class id support Nelio Laranjeiro
2016-06-23 16:52       ` [dpdk-dev] [PATCH v5 02/25] mlx5: split memory registration function Nelio Laranjeiro
2016-06-23 16:52       ` [dpdk-dev] [PATCH v5 03/25] mlx5: remove Tx gather support Nelio Laranjeiro
2016-06-23 16:53       ` [dpdk-dev] [PATCH v5 04/25] mlx5: remove Rx scatter support Nelio Laranjeiro
2016-06-23 16:53       ` [dpdk-dev] [PATCH v5 05/25] mlx5: remove configuration variable Nelio Laranjeiro
2016-06-23 16:53       ` [dpdk-dev] [PATCH v5 06/25] mlx5: remove inline Tx support Nelio Laranjeiro
2016-06-23 16:53       ` [dpdk-dev] [PATCH v5 07/25] mlx5: split Tx queue structure Nelio Laranjeiro
2016-06-23 16:53       ` [dpdk-dev] [PATCH v5 08/25] mlx5: split Rx " Nelio Laranjeiro
2016-06-23 16:53       ` [dpdk-dev] [PATCH v5 09/25] mlx5: update prerequisites for upcoming enhancements Nelio Laranjeiro
2016-06-23 16:53       ` [dpdk-dev] [PATCH v5 10/25] mlx5: add definitions for data path without Verbs Nelio Laranjeiro
2016-06-23 17:05         ` [dpdk-dev] [PATCH v5 11/25] mlx5: add support for configuration through kvargs Nelio Laranjeiro
2016-06-23 17:05         ` [dpdk-dev] [PATCH v5 12/25] mlx5: add Tx/Rx burst function selection wrapper Nelio Laranjeiro
2016-06-23 17:05         ` [dpdk-dev] [PATCH v5 13/25] mlx5: refactor Rx data path Nelio Laranjeiro
2016-06-23 17:05         ` [dpdk-dev] [PATCH v5 14/25] mlx5: refactor Tx " Nelio Laranjeiro
2016-06-23 17:05         ` [dpdk-dev] [PATCH v5 15/25] mlx5: handle Rx CQE compression Nelio Laranjeiro
2016-06-23 17:05         ` [dpdk-dev] [PATCH v5 16/25] mlx5: replace countdown with threshold for Tx completions Nelio Laranjeiro
2016-06-23 17:05         ` [dpdk-dev] [PATCH v5 17/25] mlx5: add support for inline send Nelio Laranjeiro
2016-06-23 17:05         ` [dpdk-dev] [PATCH v5 18/25] mlx5: add support for multi-packet send Nelio Laranjeiro
2016-06-23 17:05         ` [dpdk-dev] [PATCH v5 19/25] mlx5: add debugging information about Tx queues capabilities Nelio Laranjeiro
2016-06-23 17:05         ` [dpdk-dev] [PATCH v5 20/25] mlx5: check remaining space while processing Tx burst Nelio Laranjeiro
2016-06-23 17:05         ` [dpdk-dev] [PATCH v5 21/25] mlx5: resurrect Tx gather support Nelio Laranjeiro
2016-06-23 17:05         ` [dpdk-dev] [PATCH v5 22/25] mlx5: work around spurious compilation errors Nelio Laranjeiro
2016-06-23 17:05         ` [dpdk-dev] [PATCH v5 23/25] mlx5: remove redundant Rx queue initialization code Nelio Laranjeiro
2016-06-23 17:05         ` [dpdk-dev] [PATCH v5 24/25] mlx5: make Rx queue reinitialization safer Nelio Laranjeiro
2016-06-23 17:05         ` [dpdk-dev] [PATCH v5 25/25] mlx5: resurrect Rx scatter support Nelio Laranjeiro
2016-06-23 17:11       ` [dpdk-dev] [PATCH v5 00/25] Refactor mlx5 to improve performance Nélio Laranjeiro
2016-06-24  8:50       ` [dpdk-dev] [PATCH v6 " Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 01/25] drivers: fix PCI class id support Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 02/25] mlx5: split memory registration function Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 03/25] mlx5: remove Tx gather support Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 04/25] mlx5: remove Rx scatter support Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 05/25] mlx5: remove configuration variable Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 06/25] mlx5: remove inline Tx support Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 07/25] mlx5: split Tx queue structure Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 08/25] mlx5: split Rx " Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 09/25] mlx5: update prerequisites for upcoming enhancements Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 10/25] mlx5: add definitions for data path without Verbs Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 11/25] mlx5: add support for configuration through kvargs Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 12/25] mlx5: add Tx/Rx burst function selection wrapper Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 13/25] mlx5: refactor Rx data path Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 14/25] mlx5: refactor Tx " Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 15/25] mlx5: handle Rx CQE compression Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 16/25] mlx5: replace countdown with threshold for Tx completions Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 17/25] mlx5: add support for inline send Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 18/25] mlx5: add support for multi-packet send Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 19/25] mlx5: add debugging information about Tx queues capabilities Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 20/25] mlx5: check remaining space while processing Tx burst Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 21/25] mlx5: resurrect Tx gather support Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 22/25] mlx5: work around spurious compilation errors Nelio Laranjeiro
2016-06-24  8:50         ` [dpdk-dev] [PATCH v6 23/25] mlx5: remove redundant Rx queue initialization code Nelio Laranjeiro
2016-06-24  8:51         ` [dpdk-dev] [PATCH v6 24/25] mlx5: make Rx queue reinitialization safer Nelio Laranjeiro
2016-06-24  8:51         ` [dpdk-dev] [PATCH v6 25/25] mlx5: resurrect Rx scatter support Nelio Laranjeiro
2016-06-24 13:04         ` [dpdk-dev] [PATCH v6 00/25] Refactor mlx5 to improve performance Nélio Laranjeiro
2016-06-24 13:17         ` [dpdk-dev] [PATCH v7 " Nelio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 01/25] drivers: fix PCI class id support Nelio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 02/25] mlx5: split memory registration function Nelio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 03/25] mlx5: remove Tx gather support Nelio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 04/25] mlx5: remove Rx scatter support Nelio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 05/25] mlx5: remove configuration variable Nelio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 06/25] mlx5: remove inline Tx support Nelio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 07/25] mlx5: split Tx queue structure Nelio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 08/25] mlx5: split Rx " Nelio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 09/25] mlx5: update prerequisites for upcoming enhancements Nelio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 10/25] mlx5: add definitions for data path without Verbs Nelio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 11/25] mlx5: add support for configuration through kvargs Nelio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 12/25] mlx5: add Tx/Rx burst function selection wrapper Nelio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 13/25] mlx5: refactor Rx data path Nelio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 14/25] mlx5: refactor Tx " Nelio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 15/25] mlx5: handle Rx CQE compression Nelio Laranjeiro
2016-06-27 12:03             ` Bruce Richardson
2016-06-27 12:22               ` Nélio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 16/25] mlx5: replace countdown with threshold for Tx completions Nelio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 17/25] mlx5: add support for inline send Nelio Laranjeiro
2016-06-27 12:17             ` Bruce Richardson
2016-06-27 12:24               ` Nélio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 18/25] mlx5: add support for multi-packet send Nelio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 19/25] mlx5: add debugging information about Tx queues capabilities Nelio Laranjeiro
2016-06-24 13:17           ` [dpdk-dev] [PATCH v7 20/25] mlx5: check remaining space while processing Tx burst Nelio Laranjeiro
2016-06-24 13:18           ` [dpdk-dev] [PATCH v7 21/25] mlx5: resurrect Tx gather support Nelio Laranjeiro
2016-06-24 13:18           ` [dpdk-dev] [PATCH v7 22/25] mlx5: work around spurious compilation errors Nelio Laranjeiro
2016-06-27 12:12             ` Bruce Richardson
2016-06-27 12:27               ` Adrien Mazarguil
2016-06-24 13:18           ` [dpdk-dev] [PATCH v7 23/25] mlx5: remove redundant Rx queue initialization code Nelio Laranjeiro
2016-06-24 13:18           ` [dpdk-dev] [PATCH v7 24/25] mlx5: make Rx queue reinitialization safer Nelio Laranjeiro
2016-06-24 13:18           ` [dpdk-dev] [PATCH v7 25/25] mlx5: resurrect Rx scatter support Nelio Laranjeiro
2016-06-27 12:31           ` [dpdk-dev] [PATCH v7 00/25] Refactor mlx5 to improve performance Bruce Richardson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1466586355-30777-18-git-send-email-nelio.laranjeiro@6wind.com \
    --to=nelio.laranjeiro@6wind.com \
    --cc=adrien.mazarguil@6wind.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=yaacovh@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).