From: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
To: dev@dpdk.org
Cc: Chao Zhu <chaozhu@linux.vnet.ibm.com>,
Bruce Richardson <bruce.richardson@intel.com>,
Konstantin Ananyev <konstantin.ananyev@intel.com>,
Thomas Monjalon <thomas.monjalon@6wind.com>,
Cristian Dumitrescu <cristian.dumitrescu@intel.com>,
Pradeep <pradeep@us.ibm.com>
Subject: [dpdk-dev] [PATCH v3 2/6] acl: add altivec intrinsics for dpdk acl on ppc_64
Date: Sat, 16 Jul 2016 13:21:02 +0530 [thread overview]
Message-ID: <1468655466-7300-3-git-send-email-gowrishankar.m@linux.vnet.ibm.com> (raw)
In-Reply-To: <1468655466-7300-1-git-send-email-gowrishankar.m@linux.vnet.ibm.com>
This patch adds port for ACL library in ppc64le.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
---
app/test-acl/main.c | 4 +
config/defconfig_ppc_64-power8-linuxapp-gcc | 1 -
lib/librte_acl/Makefile | 2 +
lib/librte_acl/acl.h | 4 +
lib/librte_acl/acl_run.h | 2 +
lib/librte_acl/acl_run_altivec.c | 47 ++++
lib/librte_acl/acl_run_altivec.h | 328 ++++++++++++++++++++++++++++
lib/librte_acl/rte_acl.c | 13 ++
lib/librte_acl/rte_acl.h | 1 +
9 files changed, 401 insertions(+), 1 deletion(-)
create mode 100644 lib/librte_acl/acl_run_altivec.c
create mode 100644 lib/librte_acl/acl_run_altivec.h
diff --git a/app/test-acl/main.c b/app/test-acl/main.c
index d366981..1b2b176 100644
--- a/app/test-acl/main.c
+++ b/app/test-acl/main.c
@@ -105,6 +105,10 @@ static const struct acl_alg acl_alg[] = {
.name = "neon",
.alg = RTE_ACL_CLASSIFY_NEON,
},
+ {
+ .name = "altivec",
+ .alg = RTE_ACL_CLASSIFY_ALTIVEC,
+ },
};
static struct {
diff --git a/config/defconfig_ppc_64-power8-linuxapp-gcc b/config/defconfig_ppc_64-power8-linuxapp-gcc
index 9ddf3c5..dede34f 100644
--- a/config/defconfig_ppc_64-power8-linuxapp-gcc
+++ b/config/defconfig_ppc_64-power8-linuxapp-gcc
@@ -57,7 +57,6 @@ CONFIG_RTE_LIBRTE_ENIC_PMD=n
CONFIG_RTE_LIBRTE_FM10K_PMD=n
# This following libraries are not available on Power. So they're turned off.
-CONFIG_RTE_LIBRTE_ACL=n
CONFIG_RTE_LIBRTE_SCHED=n
CONFIG_RTE_LIBRTE_PORT=n
CONFIG_RTE_LIBRTE_TABLE=n
diff --git a/lib/librte_acl/Makefile b/lib/librte_acl/Makefile
index 9803e9d..d05be66 100644
--- a/lib/librte_acl/Makefile
+++ b/lib/librte_acl/Makefile
@@ -52,6 +52,8 @@ SRCS-$(CONFIG_RTE_LIBRTE_ACL) += acl_run_scalar.c
ifneq ($(filter y,$(CONFIG_RTE_ARCH_ARM) $(CONFIG_RTE_ARCH_ARM64)),)
SRCS-$(CONFIG_RTE_LIBRTE_ACL) += acl_run_neon.c
CFLAGS_acl_run_neon.o += -flax-vector-conversions -Wno-maybe-uninitialized
+else ifeq ($(CONFIG_RTE_ARCH_PPC_64),y)
+SRCS-$(CONFIG_RTE_LIBRTE_ACL) += acl_run_altivec.c
else
SRCS-$(CONFIG_RTE_LIBRTE_ACL) += acl_run_sse.c
#check if flag for SSE4.1 is already on, if not set it up manually
diff --git a/lib/librte_acl/acl.h b/lib/librte_acl/acl.h
index 09d6784..6664a55 100644
--- a/lib/librte_acl/acl.h
+++ b/lib/librte_acl/acl.h
@@ -234,6 +234,10 @@ int
rte_acl_classify_neon(const struct rte_acl_ctx *ctx, const uint8_t **data,
uint32_t *results, uint32_t num, uint32_t categories);
+int
+rte_acl_classify_altivec(const struct rte_acl_ctx *ctx, const uint8_t **data,
+ uint32_t *results, uint32_t num, uint32_t categories);
+
#ifdef __cplusplus
}
#endif /* __cplusplus */
diff --git a/lib/librte_acl/acl_run.h b/lib/librte_acl/acl_run.h
index b2fc42c..024f393 100644
--- a/lib/librte_acl/acl_run.h
+++ b/lib/librte_acl/acl_run.h
@@ -39,7 +39,9 @@
#define MAX_SEARCHES_AVX16 16
#define MAX_SEARCHES_SSE8 8
+#define MAX_SEARCHES_ALTIVEC8 8
#define MAX_SEARCHES_SSE4 4
+#define MAX_SEARCHES_ALTIVEC4 4
#define MAX_SEARCHES_SCALAR 2
#define GET_NEXT_4BYTES(prm, idx) \
diff --git a/lib/librte_acl/acl_run_altivec.c b/lib/librte_acl/acl_run_altivec.c
new file mode 100644
index 0000000..3523526
--- /dev/null
+++ b/lib/librte_acl/acl_run_altivec.c
@@ -0,0 +1,47 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright (C) IBM Corporation 2016.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "acl_run_altivec.h"
+
+int
+rte_acl_classify_altivec(const struct rte_acl_ctx *ctx, const uint8_t **data,
+ uint32_t *results, uint32_t num, uint32_t categories)
+{
+ if (likely(num >= MAX_SEARCHES_ALTIVEC8))
+ return search_altivec_8(ctx, data, results, num, categories);
+ else if (num >= MAX_SEARCHES_ALTIVEC4)
+ return search_altivec_4(ctx, data, results, num, categories);
+ else
+ return rte_acl_classify_scalar(ctx, data, results, num,
+ categories);
+}
diff --git a/lib/librte_acl/acl_run_altivec.h b/lib/librte_acl/acl_run_altivec.h
new file mode 100644
index 0000000..1bfb79d
--- /dev/null
+++ b/lib/librte_acl/acl_run_altivec.h
@@ -0,0 +1,328 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright (C) IBM Corporation 2016.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of IBM Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#include "acl_run.h"
+#include "acl_vect.h"
+
+struct _altivec_acl_const {
+ rte_xmm_t xmm_shuffle_input;
+ rte_xmm_t xmm_index_mask;
+ rte_xmm_t xmm_ones_16;
+ rte_xmm_t range_base;
+} altivec_acl_const __attribute__((aligned(RTE_CACHE_LINE_SIZE))) = {
+ {
+ .u32 = {0x00000000, 0x04040404, 0x08080808, 0x0c0c0c0c}
+ },
+ {
+ .u32 = {RTE_ACL_NODE_INDEX, RTE_ACL_NODE_INDEX,
+ RTE_ACL_NODE_INDEX, RTE_ACL_NODE_INDEX}
+ },
+ {
+ .u16 = {1, 1, 1, 1, 1, 1, 1, 1}
+ },
+ {
+ .u32 = {0xffffff00, 0xffffff04, 0xffffff08, 0xffffff0c}
+ },
+};
+
+/*
+ * Resolve priority for multiple results (altivec version).
+ * This consists comparing the priority of the current traversal with the
+ * running set of results for the packet.
+ * For each result, keep a running array of the result (rule number) and
+ * its priority for each category.
+ */
+static inline void
+resolve_priority_altivec(uint64_t transition, int n,
+ const struct rte_acl_ctx *ctx, struct parms *parms,
+ const struct rte_acl_match_results *p, uint32_t categories)
+{
+ uint32_t x;
+ xmm_t results, priority, results1, priority1;
+ vector bool int selector;
+ xmm_t *saved_results, *saved_priority;
+
+ for (x = 0; x < categories; x += RTE_ACL_RESULTS_MULTIPLIER) {
+
+ saved_results = (xmm_t *)(&parms[n].cmplt->results[x]);
+ saved_priority =
+ (xmm_t *)(&parms[n].cmplt->priority[x]);
+
+ /* get results and priorities for completed trie */
+ results = *(const xmm_t *)&p[transition].results[x];
+ priority = *(const xmm_t *)&p[transition].priority[x];
+
+ /* if this is not the first completed trie */
+ if (parms[n].cmplt->count != ctx->num_tries) {
+
+ /* get running best results and their priorities */
+ results1 = *saved_results;
+ priority1 = *saved_priority;
+
+ /* select results that are highest priority */
+ selector = vec_cmpgt(priority1, priority);
+ results = vec_sel(results, results1, selector);
+ priority = vec_sel(priority, priority1,
+ selector);
+ }
+
+ /* save running best results and their priorities */
+ *saved_results = results;
+ *saved_priority = priority;
+ }
+}
+
+/*
+ * Check for any match in 4 transitions
+ */
+static inline __attribute__((always_inline)) uint32_t
+check_any_match_x4(uint64_t val[])
+{
+ return (val[0] | val[1] | val[2] | val[3]) & RTE_ACL_NODE_MATCH;
+}
+
+static inline __attribute__((always_inline)) void
+acl_match_check_x4(int slot, const struct rte_acl_ctx *ctx, struct parms *parms,
+ struct acl_flow_data *flows, uint64_t transitions[])
+{
+ while (check_any_match_x4(transitions)) {
+ transitions[0] = acl_match_check(transitions[0], slot, ctx,
+ parms, flows, resolve_priority_altivec);
+ transitions[1] = acl_match_check(transitions[1], slot + 1, ctx,
+ parms, flows, resolve_priority_altivec);
+ transitions[2] = acl_match_check(transitions[2], slot + 2, ctx,
+ parms, flows, resolve_priority_altivec);
+ transitions[3] = acl_match_check(transitions[3], slot + 3, ctx,
+ parms, flows, resolve_priority_altivec);
+ }
+}
+
+/*
+ * Process 4 transitions (in 2 XMM registers) in parallel
+ */
+static inline __attribute__((always_inline)) xmm_t
+transition4(xmm_t next_input, const uint64_t *trans,
+ xmm_t *indices1, xmm_t *indices2)
+{
+ xmm_t addr, tr_lo, tr_hi;
+ xmm_t in, node_type, r, t;
+ xmm_t dfa_ofs, quad_ofs;
+ xmm_t *index_mask, *tp;
+ vector bool int dfa_msk;
+ vector signed char zeroes = {};
+ uint64_t v[2];
+
+ /* Move low 32 into tr_lo and high 32 into tr_hi */
+ tr_lo = (xmm_t){(*indices1)[0], (*indices1)[2],
+ (*indices2)[0], (*indices2)[2]};
+ tr_hi = (xmm_t){(*indices1)[1], (*indices1)[3],
+ (*indices2)[1], (*indices2)[3]};
+
+ /* Calculate the address (array index) for all 4 transitions. */
+ index_mask = (xmm_t *)&altivec_acl_const.xmm_index_mask.u32;
+ t = vec_xor(*index_mask, *index_mask);
+ in = vec_perm(next_input, (xmm_t){},
+ *(vector unsigned char *)&altivec_acl_const.xmm_shuffle_input);
+
+ /* Calc node type and node addr */
+ node_type = vec_and(vec_nor(*index_mask, *index_mask), tr_lo);
+ addr = vec_and(tr_lo, *index_mask);
+
+ /* mask for DFA type(0) nodes */
+ dfa_msk = vec_cmpeq(node_type, t);
+
+ /* DFA calculations. */
+ r = vec_sr(in, (vector unsigned int){30, 30, 30, 30});
+ tp = (xmm_t *)&altivec_acl_const.range_base.u32;
+ r = vec_add(r, *tp);
+ t = vec_sr(in, (vector unsigned int){24, 24, 24, 24});
+ r = vec_perm(tr_hi, (xmm_t){(uint16_t)0 << 16},
+ (vector unsigned char)r);
+
+ dfa_ofs = vec_sub(t, r);
+
+ /* QUAD/SINGLE caluclations. */
+ t = (xmm_t)vec_cmpgt((vector signed char)in, (vector signed char)tr_hi);
+ t = (xmm_t)vec_sel(
+ vec_sel(
+ (vector signed char)vec_sub(
+ zeroes, (vector signed char)t),
+ (vector signed char)t,
+ vec_cmpgt((vector signed char)t, zeroes)),
+ zeroes,
+ vec_cmpeq((vector signed char)t, zeroes));
+
+ t = (xmm_t)vec_msum((vector signed char)t,
+ (vector unsigned char)t, (xmm_t){});
+ quad_ofs = (xmm_t)vec_msum((vector signed short)t,
+ *(vector signed short *)&altivec_acl_const.xmm_ones_16.u16,
+ (xmm_t){});
+
+ /* blend DFA and QUAD/SINGLE. */
+ t = vec_sel(quad_ofs, dfa_ofs, dfa_msk);
+
+ /* calculate address for next transitions. */
+ addr = vec_add(addr, t);
+
+ v[0] = (uint64_t)trans[addr[0]];
+ v[1] = (uint64_t)trans[addr[1]];
+ *indices1 = (xmm_t){((uint32_t *)&v)[0], ((uint32_t *)&v)[1],
+ ((uint32_t *)&v)[2], ((uint32_t *)&v)[3]};
+ v[0] = (uint64_t)trans[addr[2]];
+ v[1] = (uint64_t)trans[addr[3]];
+ *indices2 = (xmm_t){((uint32_t *)&v)[0], ((uint32_t *)&v)[1],
+ ((uint32_t *)&v)[2], ((uint32_t *)&v)[3]};
+
+ return vec_sr(next_input,
+ (vector unsigned int){CHAR_BIT, CHAR_BIT, CHAR_BIT, CHAR_BIT});
+}
+
+/*
+ * Execute trie traversal with 8 traversals in parallel
+ */
+static inline int
+search_altivec_8(const struct rte_acl_ctx *ctx, const uint8_t **data,
+ uint32_t *results, uint32_t total_packets, uint32_t categories)
+{
+ int n;
+ struct acl_flow_data flows;
+ uint64_t index_array[MAX_SEARCHES_ALTIVEC8];
+ struct completion cmplt[MAX_SEARCHES_ALTIVEC8];
+ struct parms parms[MAX_SEARCHES_ALTIVEC8];
+ xmm_t input0, input1;
+
+ acl_set_flow(&flows, cmplt, RTE_DIM(cmplt), data, results,
+ total_packets, categories, ctx->trans_table);
+
+ for (n = 0; n < MAX_SEARCHES_ALTIVEC8; n++) {
+ cmplt[n].count = 0;
+ index_array[n] = acl_start_next_trie(&flows, parms, n, ctx);
+ }
+
+ /* Check for any matches. */
+ acl_match_check_x4(0, ctx, parms, &flows, (uint64_t *)&index_array[0]);
+ acl_match_check_x4(4, ctx, parms, &flows, (uint64_t *)&index_array[4]);
+
+ while (flows.started > 0) {
+
+ /* Gather 4 bytes of input data for each stream. */
+ input0 = (xmm_t){GET_NEXT_4BYTES(parms, 0),
+ GET_NEXT_4BYTES(parms, 1),
+ GET_NEXT_4BYTES(parms, 2),
+ GET_NEXT_4BYTES(parms, 3)};
+
+ input1 = (xmm_t){GET_NEXT_4BYTES(parms, 4),
+ GET_NEXT_4BYTES(parms, 5),
+ GET_NEXT_4BYTES(parms, 6),
+ GET_NEXT_4BYTES(parms, 7)};
+
+ /* Process the 4 bytes of input on each stream. */
+
+ input0 = transition4(input0, flows.trans,
+ (xmm_t *)&index_array[0], (xmm_t *)&index_array[2]);
+ input1 = transition4(input1, flows.trans,
+ (xmm_t *)&index_array[4], (xmm_t *)&index_array[6]);
+
+ input0 = transition4(input0, flows.trans,
+ (xmm_t *)&index_array[0], (xmm_t *)&index_array[2]);
+ input1 = transition4(input1, flows.trans,
+ (xmm_t *)&index_array[4], (xmm_t *)&index_array[6]);
+
+ input0 = transition4(input0, flows.trans,
+ (xmm_t *)&index_array[0], (xmm_t *)&index_array[2]);
+ input1 = transition4(input1, flows.trans,
+ (xmm_t *)&index_array[4], (xmm_t *)&index_array[6]);
+
+ input0 = transition4(input0, flows.trans,
+ (xmm_t *)&index_array[0], (xmm_t *)&index_array[2]);
+ input1 = transition4(input1, flows.trans,
+ (xmm_t *)&index_array[4], (xmm_t *)&index_array[6]);
+
+ /* Check for any matches. */
+ acl_match_check_x4(0, ctx, parms, &flows,
+ (uint64_t *)&index_array[0]);
+ acl_match_check_x4(4, ctx, parms, &flows,
+ (uint64_t *)&index_array[4]);
+ }
+
+ return 0;
+}
+
+/*
+ * Execute trie traversal with 4 traversals in parallel
+ */
+static inline int
+search_altivec_4(const struct rte_acl_ctx *ctx, const uint8_t **data,
+ uint32_t *results, int total_packets, uint32_t categories)
+{
+ int n;
+ struct acl_flow_data flows;
+ uint64_t index_array[MAX_SEARCHES_ALTIVEC4];
+ struct completion cmplt[MAX_SEARCHES_ALTIVEC4];
+ struct parms parms[MAX_SEARCHES_ALTIVEC4];
+ xmm_t input;
+
+ acl_set_flow(&flows, cmplt, RTE_DIM(cmplt), data, results,
+ total_packets, categories, ctx->trans_table);
+
+ for (n = 0; n < MAX_SEARCHES_ALTIVEC4; n++) {
+ cmplt[n].count = 0;
+ index_array[n] = acl_start_next_trie(&flows, parms, n, ctx);
+ }
+
+ /* Check for any matches. */
+ acl_match_check_x4(0, ctx, parms, &flows, index_array);
+
+ while (flows.started > 0) {
+
+ /* Gather 4 bytes of input data for each stream. */
+ input = (xmm_t){GET_NEXT_4BYTES(parms, 0),
+ GET_NEXT_4BYTES(parms, 1),
+ GET_NEXT_4BYTES(parms, 2),
+ GET_NEXT_4BYTES(parms, 3)};
+
+ /* Process the 4 bytes of input on each stream. */
+ input = transition4(input, flows.trans,
+ (xmm_t *)&index_array[0], (xmm_t *)&index_array[2]);
+ input = transition4(input, flows.trans,
+ (xmm_t *)&index_array[0], (xmm_t *)&index_array[2]);
+ input = transition4(input, flows.trans,
+ (xmm_t *)&index_array[0], (xmm_t *)&index_array[2]);
+ input = transition4(input, flows.trans,
+ (xmm_t *)&index_array[0], (xmm_t *)&index_array[2]);
+
+ /* Check for any matches. */
+ acl_match_check_x4(0, ctx, parms, &flows, index_array);
+ }
+
+ return 0;
+}
diff --git a/lib/librte_acl/rte_acl.c b/lib/librte_acl/rte_acl.c
index 4ba9786..8b7e92c 100644
--- a/lib/librte_acl/rte_acl.c
+++ b/lib/librte_acl/rte_acl.c
@@ -75,12 +75,23 @@ rte_acl_classify_neon(__rte_unused const struct rte_acl_ctx *ctx,
return -ENOTSUP;
}
+int __attribute__ ((weak))
+rte_acl_classify_altivec(__rte_unused const struct rte_acl_ctx *ctx,
+ __rte_unused const uint8_t **data,
+ __rte_unused uint32_t *results,
+ __rte_unused uint32_t num,
+ __rte_unused uint32_t categories)
+{
+ return -ENOTSUP;
+}
+
static const rte_acl_classify_t classify_fns[] = {
[RTE_ACL_CLASSIFY_DEFAULT] = rte_acl_classify_scalar,
[RTE_ACL_CLASSIFY_SCALAR] = rte_acl_classify_scalar,
[RTE_ACL_CLASSIFY_SSE] = rte_acl_classify_sse,
[RTE_ACL_CLASSIFY_AVX2] = rte_acl_classify_avx2,
[RTE_ACL_CLASSIFY_NEON] = rte_acl_classify_neon,
+ [RTE_ACL_CLASSIFY_ALTIVEC] = rte_acl_classify_altivec,
};
/* by default, use always available scalar code path. */
@@ -119,6 +130,8 @@ rte_acl_init(void)
#elif defined(RTE_ARCH_ARM)
if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_NEON))
alg = RTE_ACL_CLASSIFY_NEON;
+#elif defined(RTE_ARCH_PPC_64)
+ alg = RTE_ACL_CLASSIFY_ALTIVEC;
#else
#ifdef CC_AVX2_SUPPORT
if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX2))
diff --git a/lib/librte_acl/rte_acl.h b/lib/librte_acl/rte_acl.h
index 0979a09..8d4e2a6 100644
--- a/lib/librte_acl/rte_acl.h
+++ b/lib/librte_acl/rte_acl.h
@@ -271,6 +271,7 @@ enum rte_acl_classify_alg {
RTE_ACL_CLASSIFY_SSE = 2, /**< requires SSE4.1 support. */
RTE_ACL_CLASSIFY_AVX2 = 3, /**< requires AVX2 support. */
RTE_ACL_CLASSIFY_NEON = 4, /**< requires NEON support. */
+ RTE_ACL_CLASSIFY_ALTIVEC = 5, /**< requires ALTIVEC support. */
RTE_ACL_CLASSIFY_NUM /* should always be the last one. */
};
--
1.9.1
next prev parent reply other threads:[~2016-07-16 7:51 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-16 7:51 [dpdk-dev] [PATCH v3 0/6] enable lpm, acl and other missing libraries in ppc64le Gowrishankar Muthukrishnan
2016-07-16 7:51 ` [dpdk-dev] [PATCH v3 1/6] lpm: add altivec intrinsics for dpdk lpm on ppc_64 Gowrishankar Muthukrishnan
2016-07-16 7:51 ` Gowrishankar Muthukrishnan [this message]
2016-07-16 7:51 ` [dpdk-dev] [PATCH v3 3/6] ip_pipeline: fix lcore mapping for varying SMT threads as in ppc64 Gowrishankar Muthukrishnan
2016-07-16 7:51 ` [dpdk-dev] [PATCH v3 4/6] table: cache align rte_bucket_4_8 Gowrishankar Muthukrishnan
2016-07-16 7:51 ` [dpdk-dev] [PATCH v3 5/6] sched: enable sched library for ppc64le Gowrishankar Muthukrishnan
2016-07-16 7:51 ` [dpdk-dev] [PATCH v3 6/6] l3fwd: add altivec support for em_hash_key Gowrishankar Muthukrishnan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1468655466-7300-3-git-send-email-gowrishankar.m@linux.vnet.ibm.com \
--to=gowrishankar.m@linux.vnet.ibm.com \
--cc=bruce.richardson@intel.com \
--cc=chaozhu@linux.vnet.ibm.com \
--cc=cristian.dumitrescu@intel.com \
--cc=dev@dpdk.org \
--cc=konstantin.ananyev@intel.com \
--cc=pradeep@us.ibm.com \
--cc=thomas.monjalon@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).