From: Fan Zhang <roy.fan.zhang@intel.com>
To: dev@dpdk.org
Cc: sergio.gonzalez.monroy@intel.com
Subject: [dpdk-dev] [PATCH v7 1/2] examples/ipsec-secgw: add configuration file support
Date: Tue, 20 Sep 2016 12:13:04 +0100 [thread overview]
Message-ID: <1474369985-55073-2-git-send-email-roy.fan.zhang@intel.com> (raw)
In-Reply-To: <1474369985-55073-1-git-send-email-roy.fan.zhang@intel.com>
This patch adds the configuration file support to ipsec_secgw
sample application. Instead of hard-coded rules, the users can
specify their own SP, SA, and routing rules in the configuration
file. An command line option "-f" is added to pass the
configuration file location to the application.
Configuration item formats:
SP rule format:
sp <ip_ver> <dir> esp <action> <priority> <src_ip> <dst_ip> \
<proto> <sport> <dport>
SA rule format:
sa <dir> <spi> <cipher_algo> <cipher_key> <auth_algo> <auth_key> \
<mode> <src_ip> <dst_ip>
Routing rule format:
rt <ip_ver> <src_ip> <dst_ip> <port>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
---
doc/guides/rel_notes/release_16_11.rst | 4 +
doc/guides/sample_app_ug/ipsec_secgw.rst | 845 +++++++++++++------------------
examples/ipsec-secgw/Makefile | 1 +
examples/ipsec-secgw/ipsec-secgw.c | 58 ++-
examples/ipsec-secgw/ipsec.h | 14 +-
examples/ipsec-secgw/parser.c | 599 ++++++++++++++++++++++
examples/ipsec-secgw/parser.h | 116 +++++
examples/ipsec-secgw/rt.c | 255 ++++------
examples/ipsec-secgw/sa.c | 747 +++++++++++++++++----------
examples/ipsec-secgw/sp4.c | 538 ++++++++++++--------
examples/ipsec-secgw/sp6.c | 539 +++++++++++++-------
11 files changed, 2397 insertions(+), 1319 deletions(-)
create mode 100644 examples/ipsec-secgw/parser.c
create mode 100644 examples/ipsec-secgw/parser.h
diff --git a/doc/guides/rel_notes/release_16_11.rst b/doc/guides/rel_notes/release_16_11.rst
index 451872e..da61798 100644
--- a/doc/guides/rel_notes/release_16_11.rst
+++ b/doc/guides/rel_notes/release_16_11.rst
@@ -82,6 +82,10 @@ Libraries
Examples
~~~~~~~~
+* **ipsec-secgw: add configuration file support**
+
+ ipsec-secgw sample application now supports configuration file to specify
+ SP, SA, and routing rules.
Other
~~~~~
diff --git a/doc/guides/sample_app_ug/ipsec_secgw.rst b/doc/guides/sample_app_ug/ipsec_secgw.rst
index fcb33c2..5cce2fe 100644
--- a/doc/guides/sample_app_ug/ipsec_secgw.rst
+++ b/doc/guides/sample_app_ug/ipsec_secgw.rst
@@ -122,7 +122,7 @@ The application has a number of command line options::
-p PORTMASK -P -u PORTMASK
--config (port,queue,lcore)[,(port,queue,lcore]
--single-sa SAIDX
- --ep0|--ep1
+ -f CONFIG_FILE_PATH
Where:
@@ -142,14 +142,11 @@ Where:
on both Inbound and Outbound. This option is meant for debugging/performance
purposes.
-* ``--ep0``: configure the app as Endpoint 0.
+* ``-f CONFIG_FILE_PATH``: the full path of text-based file containing all
+ configuration items for running the application (See Configuration file
+ syntax section below). ``-f CONFIG_FILE_PATH`` **must** be specified.
+ **ONLY** the UNIX format configuration file is accepted.
-* ``--ep1``: configure the app as Endpoint 1.
-
-Either one of ``--ep0`` or ``--ep1`` **must** be specified.
-The main purpose of these options is to easily configure two systems
-back-to-back that would forward traffic through an IPsec tunnel (see
-:ref:`figure_ipsec_endpoints`).
The mapping of lcores to port/queues is similar to other l3fwd applications.
@@ -157,7 +154,8 @@ For example, given the following command line::
./build/ipsec-secgw -l 20,21 -n 4 --socket-mem 0,2048 \
--vdev "cryptodev_null_pmd" -- -p 0xf -P -u 0x3 \
- --config="(0,0,20),(1,0,20),(2,0,21),(3,0,21)" --ep0 \
+ --config="(0,0,20),(1,0,20),(2,0,21),(3,0,21)" \
+ -f /path/to/config_file \
where each options means:
@@ -194,8 +192,12 @@ where each options means:
| | | | |
+----------+-----------+-----------+---------------------------------------+
-* The ``--ep0`` options configures the app with a given set of SP, SA and Routing
- entries as explained below in more detail.
+* The ``-f /path/to/config_file`` option enables the application read and
+ parse the configuration file specified, and configures the application
+ with a given set of SP, SA and Routing entries accordingly. The syntax of
+ the configuration file will be explained below in more detail. Please
+ **note** the parser only accepts UNIX format text file. Other formats
+ such as DOS/MAC format will cause a parse error.
Refer to the *DPDK Getting Started Guide* for general information on running
applications and the Environment Abstraction Layer (EAL) options.
@@ -219,496 +221,357 @@ For example, something like the following command line:
--vdev "cryptodev_aesni_mb_pmd" --vdev "cryptodev_null_pmd" \
-- \
-p 0xf -P -u 0x3 --config="(0,0,20),(1,0,20),(2,0,21),(3,0,21)" \
- --ep0
+ -f sample.cfg
Configurations
--------------
-The following sections provide some details on the default values used to
-initialize the SP, SA and Routing tables.
-Currently all configuration information is hard coded into the application.
+The following sections provide the syntax of configurations to initialize
+your SP, SA and Routing tables.
+Configurations shall be specified in the configuration file to be passed to
+the application. The file is then parsed by the application. The successful
+parsing will result in the appropriate rules being applied to the tables
+accordingly.
-The following image illustrate a few of the concepts regarding IPSec, such
-as protected/unprotected and inbound/outbound traffic, from the point of
-view of two back-to-back endpoints:
-.. _figure_ipsec_endpoints:
+Configuration File Syntax
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.. figure:: img/ipsec_endpoints.*
+As mention in the overview, the Security Policies are ACL rules.
+The application parsers the rules specified in the configuration file and
+passes them to the ACL table, and replicates them per socket in use.
- IPSec Inbound/Outbound traffic
+Following are the configuration file syntax.
-Note that the above image only displays unidirectional traffic per port
-for illustration purposes.
-The application supports bidirectional traffic on all ports,
+General rule syntax
+^^^^^^^^^^^^^^^^^^^
+The parse treats one line in the configuration file as one configuration
+item (unless the line concatenation symbol exists). Every configuration
+item shall follow the syntax of either SP, SA, or Routing rules specified
+below.
-Security Policy Initialization
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The configuration parser supports the following special symbols:
-As mention in the overview, the Security Policies are ACL rules.
-The application defines two ACLs, one each of Inbound and Outbound, and
-it replicates them per socket in use.
-
-Following are the default rules which show only the relevant information,
-assuming ANY value is valid for the fields not mentioned (src ip, proto,
-src/dst ports).
-
-.. _table_ipsec_endpoint_outbound_sp:
-
-.. table:: Endpoint 0 Outbound Security Policies
-
- +-----------------------------------+------------+
- | **Dst** | **SA idx** |
- | | |
- +-----------------------------------+------------+
- | 192.168.105.0/24 | 5 |
- | | |
- +-----------------------------------+------------+
- | 192.168.106.0/24 | 6 |
- | | |
- +-----------------------------------+------------+
- | 192.168.175.0/24 | 10 |
- | | |
- +-----------------------------------+------------+
- | 192.168.176.0/24 | 11 |
- | | |
- +-----------------------------------+------------+
- | 192.168.200.0/24 | 15 |
- | | |
- +-----------------------------------+------------+
- | 192.168.201.0/24 | 16 |
- | | |
- +-----------------------------------+------------+
- | 192.168.55.0/24 | 25 |
- | | |
- +-----------------------------------+------------+
- | 192.168.56.0/24 | 26 |
- | | |
- +-----------------------------------+------------+
- | 192.168.240.0/24 | BYPASS |
- | | |
- +-----------------------------------+------------+
- | 192.168.241.0/24 | BYPASS |
- | | |
- +-----------------------------------+------------+
- | 0:0:0:0:5555:5555:0:0/96 | 5 |
- | | |
- +-----------------------------------+------------+
- | 0:0:0:0:6666:6666:0:0/96 | 6 |
- | | |
- +-----------------------------------+------------+
- | 0:0:1111:1111:0:0:0:0/96 | 10 |
- | | |
- +-----------------------------------+------------+
- | 0:0:1111:1111:1111:1111:0:0/96 | 11 |
- | | |
- +-----------------------------------+------------+
- | 0:0:0:0:aaaa:aaaa:0:0/96 | 25 |
- | | |
- +-----------------------------------+------------+
- | 0:0:0:0:bbbb:bbbb:0:0/96 | 26 |
- | | |
- +-----------------------------------+------------+
-
-.. _table_ipsec_endpoint_inbound_sp:
-
-.. table:: Endpoint 0 Inbound Security Policies
-
- +-----------------------------------+------------+
- | **Dst** | **SA idx** |
- | | |
- +-----------------------------------+------------+
- | 192.168.115.0/24 | 105 |
- | | |
- +-----------------------------------+------------+
- | 192.168.116.0/24 | 106 |
- | | |
- +-----------------------------------+------------+
- | 192.168.185.0/24 | 110 |
- | | |
- +-----------------------------------+------------+
- | 192.168.186.0/24 | 111 |
- | | |
- +-----------------------------------+------------+
- | 192.168.210.0/24 | 115 |
- | | |
- +-----------------------------------+------------+
- | 192.168.211.0/24 | 116 |
- | | |
- +-----------------------------------+------------+
- | 192.168.65.0/24 | 125 |
- | | |
- +-----------------------------------+------------+
- | 192.168.66.0/24 | 126 |
- | | |
- +-----------------------------------+------------+
- | 192.168.245.0/24 | BYPASS |
- | | |
- +-----------------------------------+------------+
- | 192.168.246.0/24 | BYPASS |
- | | |
- +-----------------------------------+------------+
- | ffff:0:0:0:5555:5555:0:0/96 | 105 |
- | | |
- +-----------------------------------+------------+
- | ffff:0:0:0:6666:6666:0:0/96 | 106 |
- | | |
- +-----------------------------------+------------+
- | ffff:0:1111:1111:0:0:0:0/96 | 110 |
- | | |
- +-----------------------------------+------------+
- | ffff:0:1111:1111:1111:1111:0:0/96 | 111 |
- | | |
- +-----------------------------------+------------+
- | ffff:0:0:0:aaaa:aaaa:0:0/96 | 125 |
- | | |
- +-----------------------------------+------------+
- | ffff:0:0:0:bbbb:bbbb:0:0/96 | 126 |
- | | |
- +-----------------------------------+------------+
-
-For Endpoint 1, we use the same policies in reverse, meaning the Inbound SP
-entries are set as Outbound and vice versa.
-
-
-Security Association Initialization
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The SAs are kept in a array table.
-
-For Inbound, the SPI is used as index modulo the table size.
-This means that on a table for 100 SA, SPI 5 and 105 would use the same index
-and that is not currently supported.
-
-Notice that it is not an issue for Outbound traffic as we store the index and
-not the SPI in the Security Policy.
-
-All SAs configured with AES-CBC and HMAC-SHA1 share the same values for cipher
-block size and key, and authentication digest size and key.
-
-The following are the default values:
-
-.. _table_ipsec_endpoint_outbound_sa:
-
-.. table:: Endpoint 0 Outbound Security Associations
-
- +---------+----------+------------+-----------+----------------+----------------+
- | **SPI** | **Mode** | **Cipher** | **Auth** | **Tunnel src** | **Tunnel dst** |
- | | | | | | |
- +---------+----------+------------+-----------+----------------+----------------+
- | 5 | Tunnel | AES-CBC | HMAC-SHA1 | 172.16.1.5 | 172.16.2.5 |
- | | | | | | |
- +---------+----------+------------+-----------+----------------+----------------+
- | 6 | Tunnel | AES-CBC | HMAC-SHA1 | 172.16.1.6 | 172.16.2.6 |
- | | | | | | |
- +---------+----------+------------+-----------+----------------+----------------+
- | 10 | Trans | AES-CBC | HMAC-SHA1 | N/A | N/A |
- | | | | | | |
- +---------+----------+------------+-----------+----------------+----------------+
- | 11 | Trans | AES-CBC | HMAC-SHA1 | N/A | N/A |
- | | | | | | |
- +---------+----------+------------+-----------+----------------+----------------+
- | 15 | Tunnel | NULL | NULL | 172.16.1.5 | 172.16.2.5 |
- | | | | | | |
- +---------+----------+------------+-----------+----------------+----------------+
- | 16 | Tunnel | NULL | NULL | 172.16.1.6 | 172.16.2.6 |
- | | | | | | |
- +---------+----------+------------+-----------+----------------+----------------+
- | 25 | Tunnel | AES-CBC | HMAC-SHA1 | 1111:1111: | 2222:2222: |
- | | | | | 1111:1111: | 2222:2222: |
- | | | | | 1111:1111: | 2222:2222: |
- | | | | | 1111:5555 | 2222:5555 |
- | | | | | | |
- +---------+----------+------------+-----------+----------------+----------------+
- | 26 | Tunnel | AES-CBC | HMAC-SHA1 | 1111:1111: | 2222:2222: |
- | | | | | 1111:1111: | 2222:2222: |
- | | | | | 1111:1111: | 2222:2222: |
- | | | | | 1111:6666 | 2222:6666 |
- | | | | | | |
- +---------+----------+------------+-----------+----------------+----------------+
-
-.. _table_ipsec_endpoint_inbound_sa:
-
-.. table:: Endpoint 0 Inbound Security Associations
-
- +---------+----------+------------+-----------+----------------+----------------+
- | **SPI** | **Mode** | **Cipher** | **Auth** | **Tunnel src** | **Tunnel dst** |
- | | | | | | |
- +---------+----------+------------+-----------+----------------+----------------+
- | 105 | Tunnel | AES-CBC | HMAC-SHA1 | 172.16.2.5 | 172.16.1.5 |
- | | | | | | |
- +---------+----------+------------+-----------+----------------+----------------+
- | 106 | Tunnel | AES-CBC | HMAC-SHA1 | 172.16.2.6 | 172.16.1.6 |
- | | | | | | |
- +---------+----------+------------+-----------+----------------+----------------+
- | 110 | Trans | AES-CBC | HMAC-SHA1 | N/A | N/A |
- | | | | | | |
- +---------+----------+------------+-----------+----------------+----------------+
- | 111 | Trans | AES-CBC | HMAC-SHA1 | N/A | N/A |
- | | | | | | |
- +---------+----------+------------+-----------+----------------+----------------+
- | 115 | Tunnel | NULL | NULL | 172.16.2.5 | 172.16.1.5 |
- | | | | | | |
- +---------+----------+------------+-----------+----------------+----------------+
- | 116 | Tunnel | NULL | NULL | 172.16.2.6 | 172.16.1.6 |
- | | | | | | |
- +---------+----------+------------+-----------+----------------+----------------+
- | 125 | Tunnel | AES-CBC | HMAC-SHA1 | 2222:2222: | 1111:1111: |
- | | | | | 2222:2222: | 1111:1111: |
- | | | | | 2222:2222: | 1111:1111: |
- | | | | | 2222:5555 | 1111:5555 |
- | | | | | | |
- +---------+----------+------------+-----------+----------------+----------------+
- | 126 | Tunnel | AES-CBC | HMAC-SHA1 | 2222:2222: | 1111:1111: |
- | | | | | 2222:2222: | 1111:1111: |
- | | | | | 2222:2222: | 1111:1111: |
- | | | | | 2222:6666 | 1111:6666 |
- | | | | | | |
- +---------+----------+------------+-----------+----------------+----------------+
-
-For Endpoint 1, we use the same policies in reverse, meaning the Inbound SP
-entries are set as Outbound and vice versa.
-
-
-Routing Initialization
-~~~~~~~~~~~~~~~~~~~~~~
-
-The Routing is implemented using an LPM table.
-
-Following default values:
-
-.. _table_ipsec_endpoint_outbound_routing:
-
-.. table:: Endpoint 0 Routing Table
-
- +------------------+----------+
- | **Dst addr** | **Port** |
- | | |
- +------------------+----------+
- | 172.16.2.5/32 | 0 |
- | | |
- +------------------+----------+
- | 172.16.2.6/32 | 1 |
- | | |
- +------------------+----------+
- | 192.168.175.0/24 | 0 |
- | | |
- +------------------+----------+
- | 192.168.176.0/24 | 1 |
- | | |
- +------------------+----------+
- | 192.168.240.0/24 | 0 |
- | | |
- +------------------+----------+
- | 192.168.241.0/24 | 1 |
- | | |
- +------------------+----------+
- | 192.168.115.0/24 | 2 |
- | | |
- +------------------+----------+
- | 192.168.116.0/24 | 3 |
- | | |
- +------------------+----------+
- | 192.168.65.0/24 | 2 |
- | | |
- +------------------+----------+
- | 192.168.66.0/24 | 3 |
- | | |
- +------------------+----------+
- | 192.168.185.0/24 | 2 |
- | | |
- +------------------+----------+
- | 192.168.186.0/24 | 3 |
- | | |
- +------------------+----------+
- | 192.168.210.0/24 | 2 |
- | | |
- +------------------+----------+
- | 192.168.211.0/24 | 3 |
- | | |
- +------------------+----------+
- | 192.168.245.0/24 | 2 |
- | | |
- +------------------+----------+
- | 192.168.246.0/24 | 3 |
- | | |
- +------------------+----------+
- | 2222:2222: | 0 |
- | 2222:2222: | |
- | 2222:2222: | |
- | 2222:5555/116 | |
- | | |
- +------------------+----------+
- | 2222:2222: | 1 |
- | 2222:2222: | |
- | 2222:2222: | |
- | 2222:6666/116 | |
- | | |
- +------------------+----------+
- | 0000:0000: | 0 |
- | 1111:1111: | |
- | 0000:0000: | |
- | 0000:0000/116 | |
- | | |
- +------------------+----------+
- | 0000:0000: | 1 |
- | 1111:1111: | |
- | 1111:1111: | |
- | 0000:0000/116 | |
- | | |
- +------------------+----------+
- | ffff:0000: | 2 |
- | 0000:0000: | |
- | aaaa:aaaa: | |
- | 0000:0/116 | |
- | | |
- +------------------+----------+
- | ffff:0000: | 3 |
- | 0000:0000: | |
- | bbbb:bbbb: | |
- | 0000:0/116 | |
- | | |
- +------------------+----------+
- | ffff:0000: | 2 |
- | 0000:0000: | |
- | 5555:5555: | |
- | 0000:0/116 | |
- | | |
- +------------------+----------+
- | ffff:0000: | 3 |
- | 0000:0000: | |
- | 6666:6666: | |
- | 0000:0/116 | |
- | | |
- +------------------+----------+
- | ffff:0000: | 2 |
- | 1111:1111: | |
- | 0000:0000: | |
- | 0000:0000/116 | |
- | | |
- +------------------+----------+
- | ffff:0000: | 3 |
- | 1111:1111: | |
- | 1111:1111: | |
- | 0000:0000/116 | |
- | | |
- +------------------+----------+
-
-.. _table_ipsec_endpoint_inbound_routing:
-
-.. table:: Endpoint 1 Routing Table
-
- +------------------+----------+
- | **Dst addr** | **Port** |
- | | |
- +------------------+----------+
- | 172.16.1.5/32 | 0 |
- | | |
- +------------------+----------+
- | 172.16.1.6/32 | 1 |
- | | |
- +------------------+----------+
- | 192.168.185.0/24 | 0 |
- | | |
- +------------------+----------+
- | 192.168.186.0/24 | 1 |
- | | |
- +------------------+----------+
- | 192.168.245.0/24 | 0 |
- | | |
- +------------------+----------+
- | 192.168.246.0/24 | 1 |
- | | |
- +------------------+----------+
- | 192.168.105.0/24 | 2 |
- | | |
- +------------------+----------+
- | 192.168.106.0/24 | 3 |
- | | |
- +------------------+----------+
- | 192.168.55.0/24 | 2 |
- | | |
- +------------------+----------+
- | 192.168.56.0/24 | 3 |
- | | |
- +------------------+----------+
- | 192.168.175.0/24 | 2 |
- | | |
- +------------------+----------+
- | 192.168.176.0/24 | 3 |
- | | |
- +------------------+----------+
- | 192.168.200.0/24 | 2 |
- | | |
- +------------------+----------+
- | 192.168.201.0/24 | 3 |
- | | |
- +------------------+----------+
- | 192.168.240.0/24 | 2 |
- | | |
- +------------------+----------+
- | 192.168.241.0/24 | 3 |
- | | |
- +------------------+----------+
- | 1111:1111: | 0 |
- | 1111:1111: | |
- | 1111:1111: | |
- | 1111:5555/116 | |
- | | |
- +------------------+----------+
- | 1111:1111: | 1 |
- | 1111:1111: | |
- | 1111:1111: | |
- | 1111:6666/116 | |
- | | |
- +------------------+----------+
- | ffff:0000: | 0 |
- | 1111:1111: | |
- | 0000:0000: | |
- | 0000:0000/116 | |
- | | |
- +------------------+----------+
- | ffff:0000: | 1 |
- | 1111:1111: | |
- | 1111:1111: | |
- | 0000:0000/116 | |
- | | |
- +------------------+----------+
- | 0000:0000: | 2 |
- | 0000:0000: | |
- | aaaa:aaaa: | |
- | 0000:0/116 | |
- | | |
- +------------------+----------+
- | 0000:0000: | 3 |
- | 0000:0000: | |
- | bbbb:bbbb: | |
- | 0000:0/116 | |
- | | |
- +------------------+----------+
- | 0000:0000: | 2 |
- | 0000:0000: | |
- | 5555:5555: | |
- | 0000:0/116 | |
- | | |
- +------------------+----------+
- | 0000:0000: | 3 |
- | 0000:0000: | |
- | 6666:6666: | |
- | 0000:0/116 | |
- | | |
- +------------------+----------+
- | 0000:0000: | 2 |
- | 1111:1111: | |
- | 0000:0000: | |
- | 0000:0000/116 | |
- | | |
- +------------------+----------+
- | 0000:0000: | 3 |
- | 1111:1111: | |
- | 1111:1111: | |
- | 0000:0000/116 | |
- | | |
- +------------------+----------+
+ * Comment symbol **#**. Any character from this symbol to the end of
+ line is treated as comment and will not be parsed.
+
+ * Line concatenation symbol **\\**. This symbol shall be placed in the end
+ of the line to be concatenated to the line below. Multiple lines'
+ concatenation is supported.
+
+
+SP rule syntax
+^^^^^^^^^^^^^^
+
+The SP rule syntax is shown as follows:
+
+.. code-block:: console
+
+ sp <ip_ver> <dir> esp <action> <priority> <src_ip> <dst_ip>
+ <proto> <sport> <dport>
+
+
+where each options means:
+
+``<ip_ver>``
+
+ * IP protocol version
+
+ * Optional: No
+
+ * Available options:
+
+ * *ipv4*: IP protocol version 4
+ * *ipv6*: IP protocol version 6
+
+``<dir>``
+
+ * The traffic direction
+
+ * Optional: No
+
+ * Available options:
+
+ * *in*: inbound traffic
+ * *out*: outbound traffic
+
+``<action>``
+
+ * IPsec action
+
+ * Optional: No
+
+ * Available options:
+
+ * *protect <SA_idx>*: the specified traffic is protected by SA rule
+ with id SA_idx
+ * *bypass*: the specified traffic traffic is bypassed
+ * *discard*: the specified traffic is discarded
+
+``<priority>``
+
+ * Rule priority
+
+ * Optional: Yes, default priority 0 will be used
+
+ * Syntax: *pri <id>*
+
+``<src_ip>``
+
+ * The source IP address and mask
+
+ * Optional: Yes, default address 0.0.0.0 and mask of 0 will be used
+
+ * Syntax:
+
+ * *src X.X.X.X/Y* for IPv4
+ * *src XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX/Y* for IPv6
+
+``<dst_ip>``
+
+ * The destination IP address and mask
+
+ * Optional: Yes, default address 0.0.0.0 and mask of 0 will be used
+
+ * Syntax:
+
+ * *dst X.X.X.X/Y* for IPv4
+ * *dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX/Y* for IPv6
+
+``<proto>``
+
+ * The protocol start and end range
+
+ * Optional: yes, default range of 0 to 0 will be used
+
+ * Syntax: *proto X:Y*
+
+``<sport>``
+
+ * The source port start and end range
+
+ * Optional: yes, default range of 0 to 0 will be used
+
+ * Syntax: *sport X:Y*
+
+``<dport>``
+
+ * The destination port start and end range
+
+ * Optional: yes, default range of 0 to 0 will be used
+
+ * Syntax: *dport X:Y*
+
+Example SP rules:
+
+.. code-block:: console
+
+ sp ipv4 out esp protect 105 pri 1 dst 192.168.115.0/24 sport 0:65535 \
+ dport 0:65535
+
+ sp ipv6 in esp bypass pri 1 dst 0000:0000:0000:0000:5555:5555:\
+ 0000:0000/96 sport 0:65535 dport 0:65535
+
+
+SA rule syntax
+^^^^^^^^^^^^^^
+
+The successfully parsed SA rules will be stored in an array table.
+
+All SAs configured with AES-CBC and HMAC-SHA1 share the same values for
+cipher block size and key, and authentication digest size and key.
+
+The SA rule syntax is shown as follows:
+
+.. code-block:: console
+
+ sa <dir> <spi> <cipher_algo> <cipher_key> <auth_algo> <auth_key>
+ <mode> <src_ip> <dst_ip>
+
+where each options means:
+
+``<dir>``
+
+ * The traffic direction
+
+ * Optional: No
+
+ * Available options:
+
+ * *in*: inbound traffic
+ * *out*: outbound traffic
+
+``<spi>``
+
+ * The SPI number
+
+ * Optional: No
+
+ * Syntax: unsigned integer number
+
+``<cipher_algo>``
+
+ * Cipher algorithm
+
+ * Optional: No
+
+ * Available options:
+
+ * *null*: NULL algorithm
+ * *aes-128-cbc*: AES-CBC 128-bit algorithm
+
+ * Syntax: *cipher_algo <your algorithm>*
+
+``<cipher_key>``
+
+ * Cipher key, NOT available when 'null' algorithm is used
+
+ * Optional: No, must followed by <cipher_algo> option
+
+ * Syntax: Hexadecimal bytes (0x0-0xFF) concatenate by colon symbol ':'.
+ The number of bytes should be as same as the specified cipher algorithm
+ key size.
+
+ For example: *cipher_key A1:B2:C3:D4:A1:B2:C3:D4:A1:B2:C3:D4:
+ A1:B2:C3:D4*
+
+``<auth_algo>``
+
+ * Authentication algorithm
+
+ * Optional: No
+
+ * Available options:
+
+ * *null*: NULL algorithm
+ * *sha1-hmac*: HMAC SHA1 algorithm
+
+``<auth_key>``
+
+ * Authentication key, NOT available when 'null' algorithm is used
+
+ * Optional: No, must followed by <auth_algo> option
+
+ * Syntax: Hexadecimal bytes (0x0-0xFF) concatenate by colon symbol ':'.
+ The number of bytes should be as same as the specified authentication
+ algorithm key size.
+
+ For example: *auth_key A1:B2:C3:D4:A1:B2:C3:D4:A1:B2:C3:D4:A1:B2:C3:D4:
+ A1:B2:C3:D4*
+
+``<mode>``
+
+ * The operation mode
+
+ * Optional: No
+
+ * Available options:
+
+ * *ipv4-tunnel*: Tunnel mode for IPv4 packets
+ * *ipv6-tunnel*: Tunnel mode for IPv6 packets
+ * *transport*: transport mode
+
+ * Syntax: mode XXX
+
+``<src_ip>``
+
+ * The source IP address. This option is not available when
+ transport mode is used
+
+ * Optional: Yes, default address 0.0.0.0 will be used
+
+ * Syntax:
+
+ * *src X.X.X.X* for IPv4
+ * *src XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX* for IPv6
+
+``<dst_ip>``
+
+ * The destination IP address. This option is not available when
+ transport mode is used
+
+ * Optional: Yes, default address 0.0.0.0 will be used
+
+ * Syntax:
+
+ * *dst X.X.X.X* for IPv4
+ * *dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX* for IPv6
+
+Example SA rules:
+
+.. code-block:: console
+
+ sa out 5 cipher_algo null auth_algo null mode ipv4-tunnel \
+ src 172.16.1.5 dst 172.16.2.5
+
+ sa out 25 cipher_algo aes-128-cbc \
+ cipher_key c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:c3 \
+ auth_algo sha1-hmac \
+ auth_key c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:c3:c3 \
+ mode ipv6-tunnel \
+ src 1111:1111:1111:1111:1111:1111:1111:5555 \
+ dst 2222:2222:2222:2222:2222:2222:2222:5555
+
+
+Routing rule syntax
+^^^^^^^^^^^^^^^^^^^
+
+The Routing rule syntax is shown as follows:
+
+.. code-block:: console
+
+ rt <ip_ver> <src_ip> <dst_ip> <port>
+
+
+where each options means:
+
+``<ip_ver>``
+
+ * IP protocol version
+
+ * Optional: No
+
+ * Available options:
+
+ * *ipv4*: IP protocol version 4
+ * *ipv6*: IP protocol version 6
+
+``<src_ip>``
+
+ * The source IP address and mask
+
+ * Optional: Yes, default address 0.0.0.0 and mask of 0 will be used
+
+ * Syntax:
+
+ * *src X.X.X.X/Y* for IPv4
+ * *src XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX/Y* for IPv6
+
+``<dst_ip>``
+
+ * The destination IP address and mask
+
+ * Optional: Yes, default address 0.0.0.0 and mask of 0 will be used
+
+ * Syntax:
+
+ * *dst X.X.X.X/Y* for IPv4
+ * *dst XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX/Y* for IPv6
+
+``<port>``
+
+ * The traffic output port id
+
+ * Optional: yes, default output port 0 will be used
+
+ * Syntax: *port X*
+
+Example SP rules:
+
+.. code-block:: console
+
+ rt ipv4 dst 172.16.1.5/32 port 0
+
+ rt ipv6 dst 1111:1111:1111:1111:1111:1111:1111:5555/116 port 0
diff --git a/examples/ipsec-secgw/Makefile b/examples/ipsec-secgw/Makefile
index 06b6db1..17e9155 100644
--- a/examples/ipsec-secgw/Makefile
+++ b/examples/ipsec-secgw/Makefile
@@ -53,6 +53,7 @@ endif
#
# all source are stored in SRCS-y
#
+SRCS-y += parser.c
SRCS-y += ipsec.c
SRCS-y += esp.c
SRCS-y += sp4.c
diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
index 5d04eb3..8b55534 100644
--- a/examples/ipsec-secgw/ipsec-secgw.c
+++ b/examples/ipsec-secgw/ipsec-secgw.c
@@ -72,6 +72,7 @@
#include <rte_cryptodev.h>
#include "ipsec.h"
+#include "parser.h"
#define RTE_LOGTYPE_IPSEC RTE_LOGTYPE_USER1
@@ -88,8 +89,6 @@
#define OPTION_CONFIG "config"
#define OPTION_SINGLE_SA "single-sa"
-#define OPTION_EP0 "ep0"
-#define OPTION_EP1 "ep1"
#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
@@ -158,7 +157,6 @@ static uint32_t enabled_port_mask;
static uint32_t unprotected_port_mask;
static int32_t promiscuous_on = 1;
static int32_t numa_on = 1; /**< NUMA is enabled by default. */
-static int32_t ep = -1; /**< Endpoint configuration (0 or 1) */
static uint32_t nb_lcores;
static uint32_t single_sa;
static uint32_t single_sa_idx;
@@ -838,7 +836,7 @@ print_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK -P -u PORTMASK"
" --"OPTION_CONFIG" (port,queue,lcore)[,(port,queue,lcore]"
- " --single-sa SAIDX --ep0|--ep1\n"
+ " --single-sa SAIDX -f CONFIG_FILE\n"
" -p PORTMASK: hexadecimal bitmask of ports to configure\n"
" -P : enable promiscuous mode\n"
" -u PORTMASK: hexadecimal bitmask of unprotected ports\n"
@@ -846,8 +844,8 @@ print_usage(const char *prgname)
"rx queues configuration\n"
" --single-sa SAIDX: use single SA index for outbound, "
"bypassing the SP\n"
- " --ep0: Configure as Endpoint 0\n"
- " --ep1: Configure as Endpoint 1\n", prgname);
+ " -f CONFIG_FILE: Configuration file path\n",
+ prgname);
}
static int32_t
@@ -960,18 +958,6 @@ parse_args_long_options(struct option *lgopts, int32_t option_index)
}
}
- if (__STRNCMP(optname, OPTION_EP0)) {
- printf("endpoint 0\n");
- ep = 0;
- ret = 0;
- }
-
- if (__STRNCMP(optname, OPTION_EP1)) {
- printf("endpoint 1\n");
- ep = 1;
- ret = 0;
- }
-
return ret;
}
#undef __STRNCMP
@@ -986,14 +972,13 @@ parse_args(int32_t argc, char **argv)
static struct option lgopts[] = {
{OPTION_CONFIG, 1, 0, 0},
{OPTION_SINGLE_SA, 1, 0, 0},
- {OPTION_EP0, 0, 0, 0},
- {OPTION_EP1, 0, 0, 0},
{NULL, 0, 0, 0}
};
+ int32_t f_present = 0;
argvopt = argv;
- while ((opt = getopt_long(argc, argvopt, "p:Pu:",
+ while ((opt = getopt_long(argc, argvopt, "p:Pu:f:",
lgopts, &option_index)) != EOF) {
switch (opt) {
@@ -1017,6 +1002,21 @@ parse_args(int32_t argc, char **argv)
return -1;
}
break;
+ case 'f':
+ if (f_present == 1) {
+ printf("\"-f\" option present more than "
+ "once!\n");
+ print_usage(prgname);
+ return -1;
+ }
+ if (parse_cfg_file(optarg) < 0) {
+ printf("parsing file \"%s\" failed\n",
+ optarg);
+ print_usage(prgname);
+ return -1;
+ }
+ f_present = 1;
+ break;
case 0:
if (parse_args_long_options(lgopts, option_index)) {
print_usage(prgname);
@@ -1029,6 +1029,11 @@ parse_args(int32_t argc, char **argv)
}
}
+ if (f_present == 0) {
+ printf("Mandatory option \"-f\" not present\n");
+ return -1;
+ }
+
if (optind >= 0)
argv[optind-1] = prgname;
@@ -1411,9 +1416,6 @@ main(int32_t argc, char **argv)
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid parameters\n");
- if (ep < 0)
- rte_exit(EXIT_FAILURE, "need to choose either EP0 or EP1\n");
-
if ((unprotected_port_mask & enabled_port_mask) !=
unprotected_port_mask)
rte_exit(EXIT_FAILURE, "Invalid unprotected portmask 0x%x\n",
@@ -1443,13 +1445,13 @@ main(int32_t argc, char **argv)
if (socket_ctx[socket_id].mbuf_pool)
continue;
- sa_init(&socket_ctx[socket_id], socket_id, ep);
+ sa_init(&socket_ctx[socket_id], socket_id);
- sp4_init(&socket_ctx[socket_id], socket_id, ep);
+ sp4_init(&socket_ctx[socket_id], socket_id);
- sp6_init(&socket_ctx[socket_id], socket_id, ep);
+ sp6_init(&socket_ctx[socket_id], socket_id);
- rt_init(&socket_ctx[socket_id], socket_id, ep);
+ rt_init(&socket_ctx[socket_id], socket_id);
pool_init(&socket_ctx[socket_id], socket_id, NB_MBUF);
}
diff --git a/examples/ipsec-secgw/ipsec.h b/examples/ipsec-secgw/ipsec.h
index a442a74..4cc316c 100644
--- a/examples/ipsec-secgw/ipsec.h
+++ b/examples/ipsec-secgw/ipsec.h
@@ -90,6 +90,8 @@ struct ip_addr {
} ip;
};
+#define MAX_KEY_SIZE 20
+
struct ipsec_sa {
uint32_t spi;
uint32_t cdev_id_qp;
@@ -106,6 +108,10 @@ struct ipsec_sa {
#define TRANSPORT (1 << 2)
struct ip_addr src;
struct ip_addr dst;
+ uint8_t cipher_key[MAX_KEY_SIZE];
+ uint16_t cipher_key_len;
+ uint8_t auth_key[MAX_KEY_SIZE];
+ uint16_t auth_key_len;
struct rte_crypto_sym_xform *xforms;
} __rte_cache_aligned;
@@ -183,15 +189,15 @@ outbound_sa_lookup(struct sa_ctx *sa_ctx, uint32_t sa_idx[],
struct ipsec_sa *sa[], uint16_t nb_pkts);
void
-sp4_init(struct socket_ctx *ctx, int32_t socket_id, uint32_t ep);
+sp4_init(struct socket_ctx *ctx, int32_t socket_id);
void
-sp6_init(struct socket_ctx *ctx, int32_t socket_id, uint32_t ep);
+sp6_init(struct socket_ctx *ctx, int32_t socket_id);
void
-sa_init(struct socket_ctx *ctx, int32_t socket_id, uint32_t ep);
+sa_init(struct socket_ctx *ctx, int32_t socket_id);
void
-rt_init(struct socket_ctx *ctx, int32_t socket_id, uint32_t ep);
+rt_init(struct socket_ctx *ctx, int32_t socket_id);
#endif /* __IPSEC_H__ */
diff --git a/examples/ipsec-secgw/parser.c b/examples/ipsec-secgw/parser.c
new file mode 100644
index 0000000..99bdfc5
--- /dev/null
+++ b/examples/ipsec-secgw/parser.c
@@ -0,0 +1,599 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <rte_common.h>
+#include <rte_crypto.h>
+
+#include <cmdline_parse_string.h>
+#include <cmdline_parse_num.h>
+#include <cmdline_parse_ipaddr.h>
+#include <cmdline_socket.h>
+#include <cmdline.h>
+
+#include "ipsec.h"
+#include "parser.h"
+
+#define PARSE_DELIMITER " \f\n\r\t\v"
+static int
+parse_tokenize_string(char *string, char *tokens[], uint32_t *n_tokens)
+{
+ uint32_t i;
+
+ if ((string == NULL) ||
+ (tokens == NULL) ||
+ (*n_tokens < 1))
+ return -EINVAL;
+
+ for (i = 0; i < *n_tokens; i++) {
+ tokens[i] = strtok_r(string, PARSE_DELIMITER, &string);
+ if (tokens[i] == NULL)
+ break;
+ }
+
+ if ((i == *n_tokens) &&
+ (NULL != strtok_r(string, PARSE_DELIMITER, &string)))
+ return -E2BIG;
+
+ *n_tokens = i;
+ return 0;
+}
+
+#define INADDRSZ 4
+#define IN6ADDRSZ 16
+
+/* int
+ * inet_pton4(src, dst)
+ * like inet_aton() but without all the hexadecimal and shorthand.
+ * return:
+ * 1 if `src' is a valid dotted quad, else 0.
+ * notice:
+ * does not touch `dst' unless it's returning 1.
+ * author:
+ * Paul Vixie, 1996.
+ */
+static int
+inet_pton4(const char *src, unsigned char *dst)
+{
+ static const char digits[] = "0123456789";
+ int saw_digit, octets, ch;
+ unsigned char tmp[INADDRSZ], *tp;
+
+ saw_digit = 0;
+ octets = 0;
+ *(tp = tmp) = 0;
+ while ((ch = *src++) != '\0') {
+ const char *pch;
+
+ pch = strchr(digits, ch);
+ if (pch != NULL) {
+ unsigned int new = *tp * 10 + (pch - digits);
+
+ if (new > 255)
+ return 0;
+ if (!saw_digit) {
+ if (++octets > 4)
+ return 0;
+ saw_digit = 1;
+ }
+ *tp = (unsigned char)new;
+ } else if (ch == '.' && saw_digit) {
+ if (octets == 4)
+ return 0;
+ *++tp = 0;
+ saw_digit = 0;
+ } else
+ return 0;
+ }
+ if (octets < 4)
+ return 0;
+
+ memcpy(dst, tmp, INADDRSZ);
+ return 1;
+}
+
+/* int
+ * inet_pton6(src, dst)
+ * convert presentation level address to network order binary form.
+ * return:
+ * 1 if `src' is a valid [RFC1884 2.2] address, else 0.
+ * notice:
+ * (1) does not touch `dst' unless it's returning 1.
+ * (2) :: in a full address is silently ignored.
+ * credit:
+ * inspired by Mark Andrews.
+ * author:
+ * Paul Vixie, 1996.
+ */
+static int
+inet_pton6(const char *src, unsigned char *dst)
+{
+ static const char xdigits_l[] = "0123456789abcdef",
+ xdigits_u[] = "0123456789ABCDEF";
+ unsigned char tmp[IN6ADDRSZ], *tp = 0, *endp = 0, *colonp = 0;
+ const char *xdigits = 0, *curtok = 0;
+ int ch = 0, saw_xdigit = 0, count_xdigit = 0;
+ unsigned int val = 0;
+ unsigned dbloct_count = 0;
+
+ memset((tp = tmp), '\0', IN6ADDRSZ);
+ endp = tp + IN6ADDRSZ;
+ colonp = NULL;
+ /* Leading :: requires some special handling. */
+ if (*src == ':')
+ if (*++src != ':')
+ return 0;
+ curtok = src;
+ saw_xdigit = count_xdigit = 0;
+ val = 0;
+
+ while ((ch = *src++) != '\0') {
+ const char *pch;
+
+ pch = strchr((xdigits = xdigits_l), ch);
+ if (pch == NULL)
+ pch = strchr((xdigits = xdigits_u), ch);
+ if (pch != NULL) {
+ if (count_xdigit >= 4)
+ return 0;
+ val <<= 4;
+ val |= (pch - xdigits);
+ if (val > 0xffff)
+ return 0;
+ saw_xdigit = 1;
+ count_xdigit++;
+ continue;
+ }
+ if (ch == ':') {
+ curtok = src;
+ if (!saw_xdigit) {
+ if (colonp)
+ return 0;
+ colonp = tp;
+ continue;
+ } else if (*src == '\0') {
+ return 0;
+ }
+ if (tp + sizeof(int16_t) > endp)
+ return 0;
+ *tp++ = (unsigned char) ((val >> 8) & 0xff);
+ *tp++ = (unsigned char) (val & 0xff);
+ saw_xdigit = 0;
+ count_xdigit = 0;
+ val = 0;
+ dbloct_count++;
+ continue;
+ }
+ if (ch == '.' && ((tp + INADDRSZ) <= endp) &&
+ inet_pton4(curtok, tp) > 0) {
+ tp += INADDRSZ;
+ saw_xdigit = 0;
+ dbloct_count += 2;
+ break; /* '\0' was seen by inet_pton4(). */
+ }
+ return 0;
+ }
+ if (saw_xdigit) {
+ if (tp + sizeof(int16_t) > endp)
+ return 0;
+ *tp++ = (unsigned char) ((val >> 8) & 0xff);
+ *tp++ = (unsigned char) (val & 0xff);
+ dbloct_count++;
+ }
+ if (colonp != NULL) {
+ /* if we already have 8 double octets, having a colon
+ * means error */
+ if (dbloct_count == 8)
+ return 0;
+
+ /*
+ * Since some memmove()'s erroneously fail to handle
+ * overlapping regions, we'll do the shift by hand.
+ */
+ const int n = tp - colonp;
+ int i;
+
+ for (i = 1; i <= n; i++) {
+ endp[-i] = colonp[n - i];
+ colonp[n - i] = 0;
+ }
+ tp = endp;
+ }
+ if (tp != endp)
+ return 0;
+ memcpy(dst, tmp, IN6ADDRSZ);
+ return 1;
+}
+
+int
+parse_ipv4_addr(const char *token, struct in_addr *ipv4, uint32_t *mask)
+{
+ char ip_str[256] = {0};
+ char *pch;
+
+ pch = strchr(token, '/');
+ if (pch != NULL) {
+ strncpy(ip_str, token, pch - token);
+ pch += 1;
+ if (is_str_num(pch) != 0)
+ return -EINVAL;
+ if (mask)
+ *mask = atoi(pch);
+ } else {
+ strncpy(ip_str, token, sizeof(ip_str));
+ if (mask)
+ *mask = 0;
+ }
+
+ if (strlen(ip_str) >= INET_ADDRSTRLEN)
+ return -EINVAL;
+
+ if (inet_pton4(ip_str, (unsigned char *)ipv4) != 1)
+ return -EINVAL;
+
+ return 0;
+}
+
+int
+parse_ipv6_addr(const char *token, struct in6_addr *ipv6, uint32_t *mask)
+{
+ char ip_str[256] = {0};
+ char *pch;
+
+ pch = strchr(token, '/');
+ if (pch != NULL) {
+ strncpy(ip_str, token, pch - token);
+ pch += 1;
+ if (is_str_num(pch) != 0)
+ return -EINVAL;
+ if (mask)
+ *mask = atoi(pch);
+ } else {
+ strncpy(ip_str, token, sizeof(ip_str));
+ if (mask)
+ *mask = 0;
+ }
+
+ if (strlen(ip_str) >= INET6_ADDRSTRLEN)
+ return -EINVAL;
+
+ if (inet_pton6(ip_str, (unsigned char *)ipv6) != 1)
+ return -EINVAL;
+
+ return 0;
+}
+
+int
+parse_range(const char *token, uint16_t *low, uint16_t *high)
+{
+ char ch;
+ char num_str[20];
+ uint32_t pos;
+ int range_low = -1;
+ int range_high = -1;
+
+ if (!low || !high)
+ return -1;
+
+ memset(num_str, 0, 20);
+ pos = 0;
+
+ while ((ch = *token++) != '\0') {
+ if (isdigit(ch)) {
+ if (pos >= 19)
+ return -1;
+ num_str[pos++] = ch;
+ } else if (ch == ':') {
+ if (range_low != -1)
+ return -1;
+ range_low = atoi(num_str);
+ memset(num_str, 0, 20);
+ pos = 0;
+ }
+ }
+
+ if (strlen(num_str) == 0)
+ return -1;
+
+ range_high = atoi(num_str);
+
+ *low = (uint16_t)range_low;
+ *high = (uint16_t)range_high;
+
+ return 0;
+}
+
+/** sp add parse */
+struct cfg_sp_add_cfg_item {
+ cmdline_fixed_string_t sp_keyword;
+ cmdline_multi_string_t multi_string;
+};
+
+static void
+cfg_sp_add_cfg_item_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl, void *data)
+{
+ struct cfg_sp_add_cfg_item *params = parsed_result;
+ char *tokens[32];
+ uint32_t n_tokens = RTE_DIM(tokens);
+ struct parse_status *status = (struct parse_status *)data;
+
+ APP_CHECK((parse_tokenize_string(params->multi_string, tokens,
+ &n_tokens) == 0), status, "too many arguments");
+
+ if (status->status < 0)
+ return;
+
+ if (strcmp(tokens[0], "ipv4") == 0) {
+ parse_sp4_tokens(tokens, n_tokens, status);
+ if (status->status < 0)
+ return;
+ } else if (strcmp(tokens[0], "ipv6") == 0) {
+ parse_sp6_tokens(tokens, n_tokens, status);
+ if (status->status < 0)
+ return;
+ } else {
+ APP_CHECK(0, status, "unrecognizable input %s\n",
+ tokens[0]);
+ return;
+ }
+}
+
+static cmdline_parse_token_string_t cfg_sp_add_sp_str =
+ TOKEN_STRING_INITIALIZER(struct cfg_sp_add_cfg_item,
+ sp_keyword, "sp");
+
+static cmdline_parse_token_string_t cfg_sp_add_multi_str =
+ TOKEN_STRING_INITIALIZER(struct cfg_sp_add_cfg_item, multi_string,
+ TOKEN_STRING_MULTI);
+
+cmdline_parse_inst_t cfg_sp_add_rule = {
+ .f = cfg_sp_add_cfg_item_parsed,
+ .data = NULL,
+ .help_str = "",
+ .tokens = {
+ (void *) &cfg_sp_add_sp_str,
+ (void *) &cfg_sp_add_multi_str,
+ NULL,
+ },
+};
+
+/* sa add parse */
+struct cfg_sa_add_cfg_item {
+ cmdline_fixed_string_t sa_keyword;
+ cmdline_multi_string_t multi_string;
+};
+
+static void
+cfg_sa_add_cfg_item_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl, void *data)
+{
+ struct cfg_sa_add_cfg_item *params = parsed_result;
+ char *tokens[32];
+ uint32_t n_tokens = RTE_DIM(tokens);
+ struct parse_status *status = (struct parse_status *)data;
+
+ APP_CHECK(parse_tokenize_string(params->multi_string, tokens,
+ &n_tokens) == 0, status, "too many arguments\n");
+
+ parse_sa_tokens(tokens, n_tokens, status);
+}
+
+static cmdline_parse_token_string_t cfg_sa_add_sa_str =
+ TOKEN_STRING_INITIALIZER(struct cfg_sa_add_cfg_item,
+ sa_keyword, "sa");
+
+static cmdline_parse_token_string_t cfg_sa_add_multi_str =
+ TOKEN_STRING_INITIALIZER(struct cfg_sa_add_cfg_item, multi_string,
+ TOKEN_STRING_MULTI);
+
+cmdline_parse_inst_t cfg_sa_add_rule = {
+ .f = cfg_sa_add_cfg_item_parsed,
+ .data = NULL,
+ .help_str = "",
+ .tokens = {
+ (void *) &cfg_sa_add_sa_str,
+ (void *) &cfg_sa_add_multi_str,
+ NULL,
+ },
+};
+
+/* rt add parse */
+struct cfg_rt_add_cfg_item {
+ cmdline_fixed_string_t rt_keyword;
+ cmdline_multi_string_t multi_string;
+};
+
+static void
+cfg_rt_add_cfg_item_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl, void *data)
+{
+ struct cfg_rt_add_cfg_item *params = parsed_result;
+ char *tokens[32];
+ uint32_t n_tokens = RTE_DIM(tokens);
+ struct parse_status *status = (struct parse_status *)data;
+
+ APP_CHECK(parse_tokenize_string(
+ params->multi_string, tokens, &n_tokens) == 0,
+ status, "too many arguments\n");
+ if (status->status < 0)
+ return;
+
+ parse_rt_tokens(tokens, n_tokens, status);
+}
+
+static cmdline_parse_token_string_t cfg_rt_add_rt_str =
+ TOKEN_STRING_INITIALIZER(struct cfg_rt_add_cfg_item,
+ rt_keyword, "rt");
+
+static cmdline_parse_token_string_t cfg_rt_add_multi_str =
+ TOKEN_STRING_INITIALIZER(struct cfg_rt_add_cfg_item, multi_string,
+ TOKEN_STRING_MULTI);
+
+cmdline_parse_inst_t cfg_rt_add_rule = {
+ .f = cfg_rt_add_cfg_item_parsed,
+ .data = NULL,
+ .help_str = "",
+ .tokens = {
+ (void *) &cfg_rt_add_rt_str,
+ (void *) &cfg_rt_add_multi_str,
+ NULL,
+ },
+};
+
+/** set of cfg items */
+cmdline_parse_ctx_t ipsec_ctx[] = {
+ (cmdline_parse_inst_t *)&cfg_sp_add_rule,
+ (cmdline_parse_inst_t *)&cfg_sa_add_rule,
+ (cmdline_parse_inst_t *)&cfg_rt_add_rule,
+ NULL,
+};
+
+int
+parse_cfg_file(const char *cfg_filename)
+{
+ struct cmdline *cl = cmdline_stdin_new(ipsec_ctx, "");
+ FILE *f = fopen(cfg_filename, "r");
+ char str[1024] = {0}, *get_s = NULL;
+ uint32_t line_num = 0;
+ struct parse_status status = {0};
+
+ if (f == NULL) {
+ rte_panic("Error: invalid file descriptor %s\n",
+ cfg_filename);
+ goto error_exit;
+ }
+
+ if (cl == NULL) {
+ rte_panic("Error: cannot create cmdline instance\n");
+ goto error_exit;
+ }
+
+ cfg_sp_add_rule.data = &status;
+ cfg_sa_add_rule.data = &status;
+ cfg_rt_add_rule.data = &status;
+
+ do {
+ char oneline[1024];
+
+ get_s = fgets(oneline, 1024, f);
+ if (get_s) {
+ char *pos;
+
+ line_num++;
+
+ if (strlen(oneline) > 1022) {
+ rte_panic("%s:%u: error: the line "
+ "contains more characters the "
+ "parser can handle\n",
+ cfg_filename, line_num);
+ goto error_exit;
+ }
+
+ /* process comment char '#' */
+ if (oneline[0] == '#')
+ continue;
+
+ pos = strchr(oneline, '#');
+ if (pos != NULL)
+ *pos = '\0';
+
+ /* process line concatenator '\' */
+ pos = strchr(oneline, 92);
+ if (pos != NULL) {
+ if (pos != oneline+strlen(oneline) - 2) {
+ rte_panic("%s:%u: error: no "
+ "character should exist "
+ "after '\\' symbol\n",
+ cfg_filename, line_num);
+ goto error_exit;
+ }
+
+ *pos = '\0';
+
+ if (strlen(oneline) + strlen(str) > 1022) {
+ rte_panic("%s:%u: error: the "
+ "concatenated line "
+ "contains more characters "
+ "the parser can handle\n",
+ cfg_filename, line_num);
+ goto error_exit;
+ }
+
+ strncpy(str + strlen(str), oneline,
+ strlen(oneline));
+
+ continue;
+ }
+
+ /* copy the line to str and process */
+ if (strlen(oneline) + strlen(str) > 1022) {
+ rte_panic("%s:%u: error: the line "
+ "contains more characters the "
+ "parser can handle\n",
+ cfg_filename, line_num);
+ goto error_exit;
+ }
+ strncpy(str + strlen(str), oneline,
+ strlen(oneline));
+
+ str[strlen(str)] = '\n';
+ if (cmdline_parse(cl, str) < 0) {
+ rte_panic("%s:%u: error: parsing \"%s\" "
+ "failed\n", cfg_filename,
+ line_num, str);
+ goto error_exit;
+ }
+
+ if (status.status < 0) {
+ rte_panic("%s:%u: error: %s",
+ cfg_filename, line_num,
+ status.parse_msg);
+ goto error_exit;
+ }
+
+ memset(str, 0, 1024);
+ }
+ } while (get_s != NULL);
+
+ cmdline_stdin_exit(cl);
+ fclose(f);
+
+ return 0;
+
+error_exit:
+ if (cl)
+ cmdline_stdin_exit(cl);
+ if (f)
+ fclose(f);
+
+ return -1;
+}
diff --git a/examples/ipsec-secgw/parser.h b/examples/ipsec-secgw/parser.h
new file mode 100644
index 0000000..d31ae01
--- /dev/null
+++ b/examples/ipsec-secgw/parser.h
@@ -0,0 +1,116 @@
+/* BSD LICENSE
+ *
+ * Copyright(c) 2016 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/types.h>
+#include <netinet/in.h>
+#include <netinet/ip.h>
+
+#ifndef __PARSER_H
+#define __PARSER_H
+
+struct parse_status {
+ int status;
+ char parse_msg[256];
+};
+
+#define APP_CHECK(exp, status, fmt, ...) \
+do { \
+ if (!(exp)) { \
+ sprintf(status->parse_msg, fmt "\n", \
+ ## __VA_ARGS__); \
+ status->status = -1; \
+ } else \
+ status->status = 0; \
+} while (0)
+
+#define APP_CHECK_PRESENCE(val, str, status) \
+ APP_CHECK(val == 0, status, \
+ "item \"%s\" already present", str)
+
+#define APP_CHECK_TOKEN_EQUAL(tokens, index, ref, status) \
+ APP_CHECK(strcmp(tokens[index], ref) == 0, status, \
+ "unrecognized input \"%s\": expect \"%s\"\n", \
+ tokens[index], ref)
+
+static inline int
+is_str_num(const char *str)
+{
+ uint32_t i;
+
+ for (i = 0; i < strlen(str); i++)
+ if (!isdigit(str[i]))
+ return -1;
+
+ return 0;
+}
+
+#define APP_CHECK_TOKEN_IS_NUM(tokens, index, status) \
+ APP_CHECK(is_str_num(tokens[index]) == 0, status, \
+ "input \"%s\" is not valid number string", tokens[index])
+
+
+#define INCREMENT_TOKEN_INDEX(index, max_num, status) \
+do { \
+ APP_CHECK(index + 1 < max_num, status, "reaching the end of " \
+ "the token array"); \
+ index++; \
+} while (0)
+
+int
+parse_ipv4_addr(const char *token, struct in_addr *ipv4, uint32_t *mask);
+
+int
+parse_ipv6_addr(const char *token, struct in6_addr *ipv6, uint32_t *mask);
+
+int
+parse_range(const char *token, uint16_t *low, uint16_t *high);
+
+void
+parse_sp4_tokens(char **tokens, uint32_t n_tokens,
+ struct parse_status *status);
+
+void
+parse_sp6_tokens(char **tokens, uint32_t n_tokens,
+ struct parse_status *status);
+
+void
+parse_sa_tokens(char **tokens, uint32_t n_tokens,
+ struct parse_status *status);
+
+void
+parse_rt_tokens(char **tokens, uint32_t n_tokens,
+ struct parse_status *status);
+
+int
+parse_cfg_file(const char *cfg_filename);
+
+#endif
diff --git a/examples/ipsec-secgw/rt.c b/examples/ipsec-secgw/rt.c
index fa5f042..e03c5f0 100644
--- a/examples/ipsec-secgw/rt.c
+++ b/examples/ipsec-secgw/rt.c
@@ -41,6 +41,7 @@
#include <rte_ip.h>
#include "ipsec.h"
+#include "parser.h"
#define RT_IPV4_MAX_RULES 1024
#define RT_IPV6_MAX_RULES 1024
@@ -57,135 +58,106 @@ struct ip6_route {
uint8_t if_out;
};
-static struct ip4_route rt_ip4_ep0[] = {
- /* Outbound */
- /* Tunnels */
- { IPv4(172, 16, 2, 5), 32, 0 },
- { IPv4(172, 16, 2, 6), 32, 1 },
- /* Transport */
- { IPv4(192, 168, 175, 0), 24, 0 },
- { IPv4(192, 168, 176, 0), 24, 1 },
- /* Bypass */
- { IPv4(192, 168, 240, 0), 24, 0 },
- { IPv4(192, 168, 241, 0), 24, 1 },
+struct ip4_route rt_ip4[RT_IPV4_MAX_RULES];
+uint32_t nb_rt_ip4;
- /* Inbound */
- /* Tunnels */
- { IPv4(192, 168, 115, 0), 24, 2 },
- { IPv4(192, 168, 116, 0), 24, 3 },
- { IPv4(192, 168, 65, 0), 24, 2 },
- { IPv4(192, 168, 66, 0), 24, 3 },
- /* Transport */
- { IPv4(192, 168, 185, 0), 24, 2 },
- { IPv4(192, 168, 186, 0), 24, 3 },
- /* NULL */
- { IPv4(192, 168, 210, 0), 24, 2 },
- { IPv4(192, 168, 211, 0), 24, 3 },
- /* Bypass */
- { IPv4(192, 168, 245, 0), 24, 2 },
- { IPv4(192, 168, 246, 0), 24, 3 },
-};
-
-static struct ip6_route rt_ip6_ep0[] = {
- /* Outbound */
- /* Tunnels */
- { { 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22,
- 0x22, 0x22, 0x22, 0x22, 0x22, 0x55, 0x55 }, 116, 0 },
- { { 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22,
- 0x22, 0x22, 0x22, 0x22, 0x22, 0x66, 0x66 }, 116, 1 },
- /* Transport */
- { { 0x00, 0x00, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, 116, 0 },
- { { 0x00, 0x00, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x11,
- 0x11, 0x11, 0x11, 0x00, 0x00, 0x00, 0x00 }, 116, 1 },
- /* Inbound */
- /* Tunnels */
- { { 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xaa,
- 0xaa, 0xaa, 0xaa, 0x00, 0x00, 0x00, 0x00 }, 116, 2 },
- { { 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xbb,
- 0xbb, 0xbb, 0xbb, 0x00, 0x00, 0x00, 0x00 }, 116, 3 },
- { { 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55,
- 0x55, 0x55, 0x55, 0x00, 0x00, 0x00, 0x00 }, 116, 2 },
- { { 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66,
- 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00 }, 116, 3 },
- /* Transport */
- { { 0xff, 0xff, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, 116, 2 },
- { { 0xff, 0xff, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x11,
- 0x11, 0x11, 0x11, 0x00, 0x00, 0x00, 0x00 }, 116, 3 },
-};
-
-static struct ip4_route rt_ip4_ep1[] = {
- /* Outbound */
- /* Tunnels */
- { IPv4(172, 16, 1, 5), 32, 0 },
- { IPv4(172, 16, 1, 6), 32, 1 },
- /* Transport */
- { IPv4(192, 168, 185, 0), 24, 0 },
- { IPv4(192, 168, 186, 0), 24, 1 },
- /* Bypass */
- { IPv4(192, 168, 245, 0), 24, 0 },
- { IPv4(192, 168, 246, 0), 24, 1 },
+struct ip6_route rt_ip6[RT_IPV4_MAX_RULES];
+uint32_t nb_rt_ip6;
- /* Inbound */
- /* Tunnels */
- { IPv4(192, 168, 105, 0), 24, 2 },
- { IPv4(192, 168, 106, 0), 24, 3 },
- { IPv4(192, 168, 55, 0), 24, 2 },
- { IPv4(192, 168, 56, 0), 24, 3 },
- /* Transport */
- { IPv4(192, 168, 175, 0), 24, 2 },
- { IPv4(192, 168, 176, 0), 24, 3 },
- /* NULL */
- { IPv4(192, 168, 200, 0), 24, 2 },
- { IPv4(192, 168, 201, 0), 24, 3 },
- /* Bypass */
- { IPv4(192, 168, 240, 0), 24, 2 },
- { IPv4(192, 168, 241, 0), 24, 3 },
-};
+void
+parse_rt_tokens(char **tokens, uint32_t n_tokens,
+ struct parse_status *status)
+{
+ uint32_t ti;
+ uint32_t *n_rts = NULL;
+ struct ip4_route *route_ipv4 = NULL;
+ struct ip6_route *route_ipv6 = NULL;
+
+ if (strcmp(tokens[0], "ipv4") == 0) {
+ n_rts = &nb_rt_ip4;
+ route_ipv4 = &rt_ip4[*n_rts];
+
+ APP_CHECK(*n_rts <= RT_IPV4_MAX_RULES - 1, status,
+ "too many rt rules, abort insertion\n");
+ if (status->status < 0)
+ return;
+
+ } else if (strcmp(tokens[0], "ipv6") == 0) {
+ n_rts = &nb_rt_ip6;
+ route_ipv6 = &rt_ip6[*n_rts];
+
+ APP_CHECK(*n_rts <= RT_IPV6_MAX_RULES - 1, status,
+ "too many rt rules, abort insertion\n");
+ if (status->status < 0)
+ return;
+ } else {
+ APP_CHECK(0, status, "unrecognized input \"%s\"",
+ tokens[0]);
+ return;
+ }
-static struct ip6_route rt_ip6_ep1[] = {
- /* Outbound */
- /* Tunnels */
- { { 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11,
- 0x11, 0x11, 0x11, 0x11, 0x11, 0x55, 0x55 }, 116, 0 },
- { { 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11,
- 0x11, 0x11, 0x11, 0x11, 0x11, 0x66, 0x66 }, 116, 1 },
- /* Transport */
- { { 0xff, 0xff, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, 116, 0 },
- { { 0xff, 0xff, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x11,
- 0x11, 0x11, 0x11, 0x00, 0x00, 0x00, 0x00 }, 116, 1 },
+ for (ti = 1; ti < n_tokens; ti++) {
+ if (strcmp(tokens[ti], "dst") == 0) {
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+
+ if (route_ipv4 != NULL) {
+ struct in_addr ip;
+ uint32_t depth = 0;
+
+ APP_CHECK(parse_ipv4_addr(tokens[ti],
+ &ip, &depth) == 0, status,
+ "unrecognized input \"%s\", "
+ "expect valid ipv4 addr",
+ tokens[ti]);
+ if (status->status < 0)
+ return;
+ route_ipv4->ip = rte_bswap32(
+ (uint32_t)ip.s_addr);
+ route_ipv4->depth = (uint8_t)depth;
+ } else {
+ struct in6_addr ip;
+ uint32_t depth;
+
+ APP_CHECK(parse_ipv6_addr(tokens[ti],
+ &ip, &depth) == 0, status,
+ "unrecognized input \"%s\", "
+ "expect valid ipv6 address",
+ tokens[ti]);
+ if (status->status < 0)
+ return;
+ memcpy(route_ipv6->ip, ip.s6_addr, 16);
+ route_ipv6->depth = (uint8_t)depth;
+ }
+ }
+
+ if (strcmp(tokens[ti], "port") == 0) {
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+ APP_CHECK_TOKEN_IS_NUM(tokens, ti, status);
+ if (status->status < 0)
+ return;
+ if (route_ipv4 != NULL)
+ route_ipv4->if_out = atoi(tokens[ti]);
+ else
+ route_ipv6->if_out = atoi(tokens[ti]);
+ }
+ }
- /* Inbound */
- /* Tunnels */
- { { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xaa,
- 0xaa, 0xaa, 0xaa, 0x00, 0x00, 0x00, 0x00 }, 116, 2 },
- { { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xbb,
- 0xbb, 0xbb, 0xbb, 0x00, 0x00, 0x00, 0x00 }, 116, 3 },
- { { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55,
- 0x55, 0x55, 0x55, 0x00, 0x00, 0x00, 0x00 }, 116, 2 },
- { { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66,
- 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00 }, 116, 3 },
- /* Transport */
- { { 0x00, 0x00, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, 116, 2 },
- { { 0x00, 0x00, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x11,
- 0x11, 0x11, 0x11, 0x00, 0x00, 0x00, 0x00 }, 116, 3 },
-};
+ *n_rts = *n_rts + 1;
+}
void
-rt_init(struct socket_ctx *ctx, int32_t socket_id, uint32_t ep)
+rt_init(struct socket_ctx *ctx, int32_t socket_id)
{
char name[PATH_MAX];
uint32_t i;
int32_t ret;
struct rte_lpm *lpm;
struct rte_lpm6 *lpm6;
- struct ip4_route *rt;
- struct ip6_route *rt6;
char a, b, c, d;
- uint32_t nb_routes, nb_routes6;
struct rte_lpm_config conf = { 0 };
struct rte_lpm6_config conf6 = { 0 };
@@ -200,23 +172,12 @@ rt_init(struct socket_ctx *ctx, int32_t socket_id, uint32_t ep)
rte_exit(EXIT_FAILURE, "IPv6 Routing Table for socket %u "
"already initialized\n", socket_id);
+ if (nb_rt_ip4 == 0 && nb_rt_ip6 == 0)
+ RTE_LOG(WARNING, IPSEC, "No Routing rule specified\n");
+
printf("Creating IPv4 Routing Table (RT) context with %u max routes\n",
RT_IPV4_MAX_RULES);
- if (ep == 0) {
- rt = rt_ip4_ep0;
- nb_routes = RTE_DIM(rt_ip4_ep0);
- rt6 = rt_ip6_ep0;
- nb_routes6 = RTE_DIM(rt_ip6_ep0);
- } else if (ep == 1) {
- rt = rt_ip4_ep1;
- nb_routes = RTE_DIM(rt_ip4_ep1);
- rt6 = rt_ip6_ep1;
- nb_routes6 = RTE_DIM(rt_ip6_ep1);
- } else
- rte_exit(EXIT_FAILURE, "Invalid EP value %u. Only 0 or 1 "
- "supported.\n", ep);
-
/* create the LPM table */
snprintf(name, sizeof(name), "%s_%u", "rt_ip4", socket_id);
conf.max_rules = RT_IPV4_MAX_RULES;
@@ -227,15 +188,17 @@ rt_init(struct socket_ctx *ctx, int32_t socket_id, uint32_t ep)
"on socket %d\n", name, socket_id);
/* populate the LPM table */
- for (i = 0; i < nb_routes; i++) {
- ret = rte_lpm_add(lpm, rt[i].ip, rt[i].depth, rt[i].if_out);
+ for (i = 0; i < nb_rt_ip4; i++) {
+ ret = rte_lpm_add(lpm, rt_ip4[i].ip, rt_ip4[i].depth,
+ rt_ip4[i].if_out);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Fail to add entry num %u to %s "
"LPM table on socket %d\n", i, name, socket_id);
- uint32_t_to_char(rt[i].ip, &a, &b, &c, &d);
+ uint32_t_to_char(rt_ip4[i].ip, &a, &b, &c, &d);
printf("LPM: Adding route %hhu.%hhu.%hhu.%hhu/%hhu (%hhu)\n",
- a, b, c, d, rt[i].depth, rt[i].if_out);
+ a, b, c, d, rt_ip4[i].depth,
+ rt_ip4[i].if_out);
}
snprintf(name, sizeof(name), "%s_%u", "rt_ip6", socket_id);
@@ -247,24 +210,24 @@ rt_init(struct socket_ctx *ctx, int32_t socket_id, uint32_t ep)
"on socket %d\n", name, socket_id);
/* populate the LPM table */
- for (i = 0; i < nb_routes6; i++) {
- ret = rte_lpm6_add(lpm6, rt6[i].ip, rt6[i].depth,
- rt6[i].if_out);
+ for (i = 0; i < nb_rt_ip6; i++) {
+ ret = rte_lpm6_add(lpm6, rt_ip6[i].ip, rt_ip6[i].depth,
+ rt_ip6[i].if_out);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Fail to add entry num %u to %s "
"LPM table on socket %d\n", i, name, socket_id);
printf("LPM6: Adding route "
" %hx:%hx:%hx:%hx:%hx:%hx:%hx:%hx/%hhx (%hhx)\n",
- (uint16_t)((rt6[i].ip[0] << 8) | rt6[i].ip[1]),
- (uint16_t)((rt6[i].ip[2] << 8) | rt6[i].ip[3]),
- (uint16_t)((rt6[i].ip[4] << 8) | rt6[i].ip[5]),
- (uint16_t)((rt6[i].ip[6] << 8) | rt6[i].ip[7]),
- (uint16_t)((rt6[i].ip[8] << 8) | rt6[i].ip[9]),
- (uint16_t)((rt6[i].ip[10] << 8) | rt6[i].ip[11]),
- (uint16_t)((rt6[i].ip[12] << 8) | rt6[i].ip[13]),
- (uint16_t)((rt6[i].ip[14] << 8) | rt6[i].ip[15]),
- rt6[i].depth, rt6[i].if_out);
+ (uint16_t)((rt_ip6[i].ip[0] << 8) | rt_ip6[i].ip[1]),
+ (uint16_t)((rt_ip6[i].ip[2] << 8) | rt_ip6[i].ip[3]),
+ (uint16_t)((rt_ip6[i].ip[4] << 8) | rt_ip6[i].ip[5]),
+ (uint16_t)((rt_ip6[i].ip[6] << 8) | rt_ip6[i].ip[7]),
+ (uint16_t)((rt_ip6[i].ip[8] << 8) | rt_ip6[i].ip[9]),
+ (uint16_t)((rt_ip6[i].ip[10] << 8) | rt_ip6[i].ip[11]),
+ (uint16_t)((rt_ip6[i].ip[12] << 8) | rt_ip6[i].ip[13]),
+ (uint16_t)((rt_ip6[i].ip[14] << 8) | rt_ip6[i].ip[15]),
+ rt_ip6[i].depth, rt_ip6[i].if_out);
}
ctx->rt_ip4 = (struct rt_ctx *)lpm;
diff --git a/examples/ipsec-secgw/sa.c b/examples/ipsec-secgw/sa.c
index 4439e0f..54b5b19 100644
--- a/examples/ipsec-secgw/sa.c
+++ b/examples/ipsec-secgw/sa.c
@@ -48,243 +48,457 @@
#include "ipsec.h"
#include "esp.h"
+#include "parser.h"
+
+struct supported_cipher_algo {
+ const char *keyword;
+ enum rte_crypto_cipher_algorithm algo;
+ uint16_t iv_len;
+ uint16_t block_size;
+ uint16_t key_len;
+};
-/* SAs Outbound */
-const struct ipsec_sa sa_out[] = {
- {
- .spi = 5,
- .src.ip.ip4 = IPv4(172, 16, 1, 5),
- .dst.ip.ip4 = IPv4(172, 16, 2, 5),
- .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
- .digest_len = 12,
- .iv_len = 16,
- .block_size = 16,
- .flags = IP4_TUNNEL
- },
- {
- .spi = 6,
- .src.ip.ip4 = IPv4(172, 16, 1, 6),
- .dst.ip.ip4 = IPv4(172, 16, 2, 6),
- .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
- .digest_len = 12,
- .iv_len = 16,
- .block_size = 16,
- .flags = IP4_TUNNEL
- },
- {
- .spi = 10,
- .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
- .digest_len = 12,
- .iv_len = 16,
- .block_size = 16,
- .flags = TRANSPORT
- },
- {
- .spi = 11,
- .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
- .digest_len = 12,
- .iv_len = 16,
- .block_size = 16,
- .flags = TRANSPORT
- },
- {
- .spi = 15,
- .src.ip.ip4 = IPv4(172, 16, 1, 5),
- .dst.ip.ip4 = IPv4(172, 16, 2, 5),
- .cipher_algo = RTE_CRYPTO_CIPHER_NULL,
- .auth_algo = RTE_CRYPTO_AUTH_NULL,
- .digest_len = 0,
- .iv_len = 0,
- .block_size = 4,
- .flags = IP4_TUNNEL
- },
- {
- .spi = 16,
- .src.ip.ip4 = IPv4(172, 16, 1, 6),
- .dst.ip.ip4 = IPv4(172, 16, 2, 6),
- .cipher_algo = RTE_CRYPTO_CIPHER_NULL,
- .auth_algo = RTE_CRYPTO_AUTH_NULL,
- .digest_len = 0,
- .iv_len = 0,
- .block_size = 4,
- .flags = IP4_TUNNEL
- },
- {
- .spi = 25,
- .src.ip.ip6.ip6_b = { 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11,
- 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x55, 0x55 },
- .dst.ip.ip6.ip6_b = { 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22,
- 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x55, 0x55 },
- .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
- .digest_len = 12,
- .iv_len = 16,
- .block_size = 16,
- .flags = IP6_TUNNEL
- },
- {
- .spi = 26,
- .src.ip.ip6.ip6_b = { 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11,
- 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x66, 0x66 },
- .dst.ip.ip6.ip6_b = { 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22,
- 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x66, 0x66 },
- .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
- .digest_len = 12,
- .iv_len = 16,
- .block_size = 16,
- .flags = IP6_TUNNEL
- },
+struct supported_auth_algo {
+ const char *keyword;
+ enum rte_crypto_auth_algorithm algo;
+ uint16_t digest_len;
+ uint16_t key_len;
};
-/* SAs Inbound */
-const struct ipsec_sa sa_in[] = {
+const struct supported_cipher_algo cipher_algos[] = {
{
- .spi = 105,
- .src.ip.ip4 = IPv4(172, 16, 2, 5),
- .dst.ip.ip4 = IPv4(172, 16, 1, 5),
- .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
- .digest_len = 12,
- .iv_len = 16,
- .block_size = 16,
- .flags = IP4_TUNNEL
+ .keyword = "null",
+ .algo = RTE_CRYPTO_CIPHER_NULL,
+ .iv_len = 0,
+ .block_size = 4,
+ .key_len = 0
},
{
- .spi = 106,
- .src.ip.ip4 = IPv4(172, 16, 2, 6),
- .dst.ip.ip4 = IPv4(172, 16, 1, 6),
- .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
- .digest_len = 12,
- .iv_len = 16,
- .block_size = 16,
- .flags = IP4_TUNNEL
- },
- {
- .spi = 110,
- .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
- .digest_len = 12,
- .iv_len = 16,
- .block_size = 16,
- .flags = TRANSPORT
- },
- {
- .spi = 111,
- .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
- .digest_len = 12,
- .iv_len = 16,
- .block_size = 16,
- .flags = TRANSPORT
- },
- {
- .spi = 115,
- .src.ip.ip4 = IPv4(172, 16, 2, 5),
- .dst.ip.ip4 = IPv4(172, 16, 1, 5),
- .cipher_algo = RTE_CRYPTO_CIPHER_NULL,
- .auth_algo = RTE_CRYPTO_AUTH_NULL,
- .digest_len = 0,
- .iv_len = 0,
- .block_size = 4,
- .flags = IP4_TUNNEL
- },
- {
- .spi = 116,
- .src.ip.ip4 = IPv4(172, 16, 2, 6),
- .dst.ip.ip4 = IPv4(172, 16, 1, 6),
- .cipher_algo = RTE_CRYPTO_CIPHER_NULL,
- .auth_algo = RTE_CRYPTO_AUTH_NULL,
- .digest_len = 0,
- .iv_len = 0,
- .block_size = 4,
- .flags = IP4_TUNNEL
- },
+ .keyword = "aes-128-cbc",
+ .algo = RTE_CRYPTO_CIPHER_AES_CBC,
+ .iv_len = 16,
+ .block_size = 16,
+ .key_len = 16
+ }
+};
+
+const struct supported_auth_algo auth_algos[] = {
{
- .spi = 125,
- .src.ip.ip6.ip6_b = { 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22,
- 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x55, 0x55 },
- .dst.ip.ip6.ip6_b = { 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11,
- 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x55, 0x55 },
- .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
- .digest_len = 12,
- .iv_len = 16,
- .block_size = 16,
- .flags = IP6_TUNNEL
+ .keyword = "null",
+ .algo = RTE_CRYPTO_AUTH_NULL,
+ .digest_len = 0,
+ .key_len = 0
},
{
- .spi = 126,
- .src.ip.ip6.ip6_b = { 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22,
- 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x66, 0x66 },
- .dst.ip.ip6.ip6_b = { 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x11,
- 0x11, 0x11, 0x11, 0x11, 0x11, 0x11, 0x66, 0x66 },
- .cipher_algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .auth_algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
- .digest_len = 12,
- .iv_len = 16,
- .block_size = 16,
- .flags = IP6_TUNNEL
- },
+ .keyword = "sha1-hmac",
+ .algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
+ .digest_len = 12,
+ .key_len = 20
+ }
};
-static uint8_t cipher_key[256] = "sixteenbytes key";
+struct ipsec_sa sa_out[IPSEC_SA_MAX_ENTRIES];
+uint32_t nb_sa_out;
-/* AES CBC xform */
-const struct rte_crypto_sym_xform aescbc_enc_xf = {
- NULL,
- RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = { RTE_CRYPTO_CIPHER_OP_ENCRYPT, RTE_CRYPTO_CIPHER_AES_CBC,
- .key = { cipher_key, 16 } }
+struct ipsec_sa sa_in[IPSEC_SA_MAX_ENTRIES];
+uint32_t nb_sa_in;
+
+static const struct supported_cipher_algo *
+find_match_cipher_algo(const char *cipher_keyword)
+{
+ size_t i;
+
+ for (i = 0; i < RTE_DIM(cipher_algos); i++) {
+ const struct supported_cipher_algo *algo =
+ &cipher_algos[i];
+
+ if (strcmp(cipher_keyword, algo->keyword) == 0)
+ return algo;
}
-};
-const struct rte_crypto_sym_xform aescbc_dec_xf = {
- NULL,
- RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = { RTE_CRYPTO_CIPHER_OP_DECRYPT, RTE_CRYPTO_CIPHER_AES_CBC,
- .key = { cipher_key, 16 } }
+ return NULL;
+}
+
+static const struct supported_auth_algo *
+find_match_auth_algo(const char *auth_keyword)
+{
+ size_t i;
+
+ for (i = 0; i < RTE_DIM(auth_algos); i++) {
+ const struct supported_auth_algo *algo =
+ &auth_algos[i];
+
+ if (strcmp(auth_keyword, algo->keyword) == 0)
+ return algo;
}
-};
-static uint8_t auth_key[256] = "twentybytes hash key";
+ return NULL;
+}
+
+/** parse_key_string
+ * parse x:x:x:x.... hex number key string into uint8_t *key
+ * return:
+ * > 0: number of bytes parsed
+ * 0: failed
+ */
+static uint32_t
+parse_key_string(const char *key_str, uint8_t *key)
+{
+ const char *pt_start = key_str, *pt_end = key_str;
+ char sub_str[3];
+ uint32_t nb_bytes = 0;
+
+ while (pt_end != NULL) {
+ pt_end = strchr(pt_start, ':');
+
+ if (pt_end == NULL)
+ strncpy(sub_str, pt_start, strlen(pt_start));
+ else {
+ if (pt_end - pt_start > 2)
+ return 0;
+
+ strncpy(sub_str, pt_start, pt_end - pt_start);
+ pt_start = pt_end + 1;
+ }
-/* SHA1 HMAC xform */
-const struct rte_crypto_sym_xform sha1hmac_gen_xf = {
- NULL,
- RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = { RTE_CRYPTO_AUTH_OP_GENERATE, RTE_CRYPTO_AUTH_SHA1_HMAC,
- .key = { auth_key, 20 }, 12, 0 }
+ key[nb_bytes++] = strtol(sub_str, NULL, 16);
}
-};
-const struct rte_crypto_sym_xform sha1hmac_verify_xf = {
- NULL,
- RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = { RTE_CRYPTO_AUTH_OP_VERIFY, RTE_CRYPTO_AUTH_SHA1_HMAC,
- .key = { auth_key, 20 }, 12, 0 }
+ return nb_bytes;
+}
+
+void
+parse_sa_tokens(char **tokens, uint32_t n_tokens,
+ struct parse_status *status)
+{
+ struct ipsec_sa *rule = NULL;
+ uint32_t ti; /*token index*/
+ uint32_t *ri /*rule index*/;
+ uint32_t cipher_algo_p = 0;
+ uint32_t auth_algo_p = 0;
+ uint32_t src_p = 0;
+ uint32_t dst_p = 0;
+ uint32_t mode_p = 0;
+
+ if (strcmp(tokens[0], "in") == 0) {
+ ri = &nb_sa_in;
+
+ APP_CHECK(*ri <= IPSEC_SA_MAX_ENTRIES - 1, status,
+ "too many sa rules, abort insertion\n");
+ if (status->status < 0)
+ return;
+
+ rule = &sa_in[*ri];
+ } else {
+ ri = &nb_sa_out;
+
+ APP_CHECK(*ri <= IPSEC_SA_MAX_ENTRIES - 1, status,
+ "too many sa rules, abort insertion\n");
+ if (status->status < 0)
+ return;
+
+ rule = &sa_out[*ri];
}
-};
-/* AES CBC xform */
-const struct rte_crypto_sym_xform null_cipher_xf = {
- NULL,
- RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = { .algo = RTE_CRYPTO_CIPHER_NULL }
+ /* spi number */
+ APP_CHECK_TOKEN_IS_NUM(tokens, 1, status);
+ if (status->status < 0)
+ return;
+ rule->spi = atoi(tokens[1]);
+
+ for (ti = 2; ti < n_tokens; ti++) {
+ if (strcmp(tokens[ti], "mode") == 0) {
+ APP_CHECK_PRESENCE(mode_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+
+ if (strcmp(tokens[ti], "ipv4-tunnel") == 0)
+ rule->flags = IP4_TUNNEL;
+ else if (strcmp(tokens[ti], "ipv6-tunnel") == 0)
+ rule->flags = IP6_TUNNEL;
+ else if (strcmp(tokens[ti], "transport") == 0)
+ rule->flags = TRANSPORT;
+ else {
+ APP_CHECK(0, status, "unrecognized "
+ "input \"%s\"", tokens[ti]);
+ return;
+ }
+
+ mode_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "cipher_algo") == 0) {
+ const struct supported_cipher_algo *algo;
+ uint32_t key_len;
+
+ APP_CHECK_PRESENCE(cipher_algo_p, tokens[ti],
+ status);
+ if (status->status < 0)
+ return;
+
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+
+ algo = find_match_cipher_algo(tokens[ti]);
+
+ APP_CHECK(algo != NULL, status, "unrecognized "
+ "input \"%s\"", tokens[ti]);
+
+ rule->cipher_algo = algo->algo;
+ rule->block_size = algo->block_size;
+ rule->iv_len = algo->iv_len;
+ rule->cipher_key_len = algo->key_len;
+
+ /* for NULL algorithm, no cipher key should
+ * exist */
+ if (rule->cipher_algo == RTE_CRYPTO_CIPHER_NULL) {
+ cipher_algo_p = 1;
+ continue;
+ }
+
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+
+ APP_CHECK(strcmp(tokens[ti], "cipher_key") == 0,
+ status, "unrecognized input \"%s\", "
+ "expect \"cipher_key\"", tokens[ti]);
+ if (status->status < 0)
+ return;
+
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+
+ key_len = parse_key_string(tokens[ti],
+ rule->cipher_key);
+ APP_CHECK(key_len == rule->cipher_key_len, status,
+ "unrecognized input \"%s\"", tokens[ti]);
+ if (status->status < 0)
+ return;
+
+ cipher_algo_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "auth_algo") == 0) {
+ const struct supported_auth_algo *algo;
+ uint32_t key_len;
+
+ APP_CHECK_PRESENCE(auth_algo_p, tokens[ti],
+ status);
+ if (status->status < 0)
+ return;
+
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+
+ algo = find_match_auth_algo(tokens[ti]);
+ APP_CHECK(algo != NULL, status, "unrecognized "
+ "input \"%s\"", tokens[ti]);
+
+ rule->auth_algo = algo->algo;
+ rule->auth_key_len = algo->key_len;
+ rule->digest_len = algo->digest_len;
+
+ /* for NULL algorithm, no auth key should exist */
+ if (rule->auth_algo == RTE_CRYPTO_AUTH_NULL) {
+ auth_algo_p = 1;
+ continue;
+ }
+
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+
+ APP_CHECK(strcmp(tokens[ti], "auth_key") == 0,
+ status, "unrecognized input \"%s\", "
+ "expect \"auth_key\"", tokens[ti]);
+ if (status->status < 0)
+ return;
+
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+
+ key_len = parse_key_string(tokens[ti],
+ rule->auth_key);
+ APP_CHECK(key_len == rule->auth_key_len, status,
+ "unrecognized input \"%s\"", tokens[ti]);
+ if (status->status < 0)
+ return;
+
+ auth_algo_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "src") == 0) {
+ APP_CHECK_PRESENCE(src_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+
+ if (rule->flags == IP4_TUNNEL) {
+ struct in_addr ip;
+
+ APP_CHECK(parse_ipv4_addr(tokens[ti],
+ &ip, NULL) == 0, status,
+ "unrecognized input \"%s\", "
+ "expect valid ipv4 addr",
+ tokens[ti]);
+ if (status->status < 0)
+ return;
+ rule->src.ip.ip4 = rte_bswap32(
+ (uint32_t)ip.s_addr);
+ } else if (rule->flags == IP6_TUNNEL) {
+ struct in6_addr ip;
+
+ APP_CHECK(parse_ipv6_addr(tokens[ti], &ip,
+ NULL) == 0, status,
+ "unrecognized input \"%s\", "
+ "expect valid ipv6 addr",
+ tokens[ti]);
+ if (status->status < 0)
+ return;
+ memcpy(rule->src.ip.ip6.ip6_b,
+ ip.s6_addr, 16);
+ } else if (rule->flags == TRANSPORT) {
+ APP_CHECK(0, status, "unrecognized input "
+ "\"%s\"", tokens[ti]);
+ return;
+ }
+
+ src_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "dst") == 0) {
+ APP_CHECK_PRESENCE(dst_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+
+ if (rule->flags == IP4_TUNNEL) {
+ struct in_addr ip;
+
+ APP_CHECK(parse_ipv4_addr(tokens[ti],
+ &ip, NULL) == 0, status,
+ "unrecognized input \"%s\", "
+ "expect valid ipv4 addr",
+ tokens[ti]);
+ if (status->status < 0)
+ return;
+ rule->dst.ip.ip4 = rte_bswap32(
+ (uint32_t)ip.s_addr);
+ } else if (rule->flags == IP6_TUNNEL) {
+ struct in6_addr ip;
+
+ APP_CHECK(parse_ipv6_addr(tokens[ti], &ip,
+ NULL) == 0, status,
+ "unrecognized input \"%s\", "
+ "expect valid ipv6 addr",
+ tokens[ti]);
+ if (status->status < 0)
+ return;
+ memcpy(rule->dst.ip.ip6.ip6_b, ip.s6_addr, 16);
+ } else if (rule->flags == TRANSPORT) {
+ APP_CHECK(0, status, "unrecognized "
+ "input \"%s\"", tokens[ti]);
+ return;
+ }
+
+ dst_p = 1;
+ continue;
+ }
+
+ /* unrecognizeable input */
+ APP_CHECK(0, status, "unrecognized input \"%s\"",
+ tokens[ti]);
+ return;
}
-};
-const struct rte_crypto_sym_xform null_auth_xf = {
- NULL,
- RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = { .algo = RTE_CRYPTO_AUTH_NULL }
+ APP_CHECK(cipher_algo_p == 1, status, "missing cipher options");
+ if (status->status < 0)
+ return;
+
+ APP_CHECK(auth_algo_p == 1, status, "missing auth options");
+ if (status->status < 0)
+ return;
+
+ APP_CHECK(mode_p == 1, status, "missing mode option");
+ if (status->status < 0)
+ return;
+
+ *ri = *ri + 1;
+}
+
+static inline void
+print_one_sa_rule(const struct ipsec_sa *sa, int inbound)
+{
+ uint32_t i;
+ uint8_t a, b, c, d;
+
+ printf("\tspi_%s(%3u):", inbound?"in":"out", sa->spi);
+
+ for (i = 0; i < RTE_DIM(cipher_algos); i++) {
+ if (cipher_algos[i].algo == sa->cipher_algo) {
+ printf("%s ", cipher_algos[i].keyword);
+ break;
+ }
}
-};
+
+ for (i = 0; i < RTE_DIM(auth_algos); i++) {
+ if (auth_algos[i].algo == sa->auth_algo) {
+ printf("%s ", auth_algos[i].keyword);
+ break;
+ }
+ }
+
+ printf("mode:");
+
+ switch (sa->flags) {
+ case IP4_TUNNEL:
+ printf("IP4Tunnel ");
+ uint32_t_to_char(sa->src.ip.ip4, &a, &b, &c, &d);
+ printf("%hhu.%hhu.%hhu.%hhu ", d, c, b, a);
+ uint32_t_to_char(sa->dst.ip.ip4, &a, &b, &c, &d);
+ printf("%hhu.%hhu.%hhu.%hhu", d, c, b, a);
+ break;
+ case IP6_TUNNEL:
+ printf("IP6Tunnel ");
+ for (i = 0; i < 16; i++) {
+ if (i % 2 && i != 15)
+ printf("%.2x:", sa->src.ip.ip6.ip6_b[i]);
+ else
+ printf("%.2x", sa->src.ip.ip6.ip6_b[i]);
+ }
+ printf(" ");
+ for (i = 0; i < 16; i++) {
+ if (i % 2 && i != 15)
+ printf("%.2x:", sa->dst.ip.ip6.ip6_b[i]);
+ else
+ printf("%.2x", sa->dst.ip.ip6.ip6_b[i]);
+ }
+ break;
+ case TRANSPORT:
+ printf("Transport");
+ break;
+ }
+ printf("\n");
+}
struct sa_ctx {
struct ipsec_sa sa[IPSEC_SA_MAX_ENTRIES];
@@ -347,25 +561,53 @@ sa_add_rules(struct sa_ctx *sa_ctx, const struct ipsec_sa entries[],
}
if (inbound) {
- if (sa->cipher_algo == RTE_CRYPTO_CIPHER_NULL) {
- sa_ctx->xf[idx].a = null_auth_xf;
- sa_ctx->xf[idx].b = null_cipher_xf;
- } else {
- sa_ctx->xf[idx].a = sha1hmac_verify_xf;
- sa_ctx->xf[idx].b = aescbc_dec_xf;
- }
+ sa_ctx->xf[idx].b.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+ sa_ctx->xf[idx].b.cipher.algo = sa->cipher_algo;
+ sa_ctx->xf[idx].b.cipher.key.data = sa->cipher_key;
+ sa_ctx->xf[idx].b.cipher.key.length =
+ sa->cipher_key_len;
+ sa_ctx->xf[idx].b.cipher.op =
+ RTE_CRYPTO_CIPHER_OP_DECRYPT;
+ sa_ctx->xf[idx].b.next = NULL;
+
+ sa_ctx->xf[idx].a.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+ sa_ctx->xf[idx].a.auth.algo = sa->auth_algo;
+ sa_ctx->xf[idx].a.auth.add_auth_data_length = 0;
+ sa_ctx->xf[idx].a.auth.key.data = sa->auth_key;
+ sa_ctx->xf[idx].a.auth.key.length =
+ sa->auth_key_len;
+ sa_ctx->xf[idx].b.auth.digest_length =
+ sa->digest_len;
+ sa_ctx->xf[idx].a.auth.op =
+ RTE_CRYPTO_AUTH_OP_VERIFY;
+
} else { /* outbound */
- if (sa->cipher_algo == RTE_CRYPTO_CIPHER_NULL) {
- sa_ctx->xf[idx].a = null_cipher_xf;
- sa_ctx->xf[idx].b = null_auth_xf;
- } else {
- sa_ctx->xf[idx].a = aescbc_enc_xf;
- sa_ctx->xf[idx].b = sha1hmac_gen_xf;
- }
+ sa_ctx->xf[idx].a.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+ sa_ctx->xf[idx].a.cipher.algo = sa->cipher_algo;
+ sa_ctx->xf[idx].a.cipher.key.data = sa->cipher_key;
+ sa_ctx->xf[idx].a.cipher.key.length =
+ sa->cipher_key_len;
+ sa_ctx->xf[idx].a.cipher.op =
+ RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+ sa_ctx->xf[idx].a.next = NULL;
+
+ sa_ctx->xf[idx].b.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+ sa_ctx->xf[idx].b.auth.algo = sa->auth_algo;
+ sa_ctx->xf[idx].b.auth.add_auth_data_length = 0;
+ sa_ctx->xf[idx].b.auth.key.data = sa->auth_key;
+ sa_ctx->xf[idx].b.auth.key.length =
+ sa->auth_key_len;
+ sa_ctx->xf[idx].b.auth.digest_length =
+ sa->digest_len;
+ sa_ctx->xf[idx].b.auth.op =
+ RTE_CRYPTO_AUTH_OP_GENERATE;
}
+
sa_ctx->xf[idx].a.next = &sa_ctx->xf[idx].b;
sa_ctx->xf[idx].b.next = NULL;
sa->xforms = &sa_ctx->xf[idx].a;
+
+ print_one_sa_rule(sa, inbound);
}
return 0;
@@ -386,10 +628,8 @@ sa_in_add_rules(struct sa_ctx *sa_ctx, const struct ipsec_sa entries[],
}
void
-sa_init(struct socket_ctx *ctx, int32_t socket_id, uint32_t ep)
+sa_init(struct socket_ctx *ctx, int32_t socket_id)
{
- const struct ipsec_sa *sa_out_entries, *sa_in_entries;
- uint32_t nb_out_entries, nb_in_entries;
const char *name;
if (ctx == NULL)
@@ -403,35 +643,30 @@ sa_init(struct socket_ctx *ctx, int32_t socket_id, uint32_t ep)
rte_exit(EXIT_FAILURE, "Outbound SA DB for socket %u already "
"initialized\n", socket_id);
- if (ep == 0) {
- sa_out_entries = sa_out;
- nb_out_entries = RTE_DIM(sa_out);
- sa_in_entries = sa_in;
- nb_in_entries = RTE_DIM(sa_in);
- } else if (ep == 1) {
- sa_out_entries = sa_in;
- nb_out_entries = RTE_DIM(sa_in);
- sa_in_entries = sa_out;
- nb_in_entries = RTE_DIM(sa_out);
- } else
- rte_exit(EXIT_FAILURE, "Invalid EP value %u. "
- "Only 0 or 1 supported.\n", ep);
-
- name = "sa_in";
- ctx->sa_in = sa_create(name, socket_id);
- if (ctx->sa_in == NULL)
- rte_exit(EXIT_FAILURE, "Error [%d] creating SA context %s "
- "in socket %d\n", rte_errno, name, socket_id);
+ if (nb_sa_in > 0) {
+ name = "sa_in";
+ ctx->sa_in = sa_create(name, socket_id);
+ if (ctx->sa_in == NULL)
+ rte_exit(EXIT_FAILURE, "Error [%d] creating SA "
+ "context %s in socket %d\n", rte_errno,
+ name, socket_id);
- name = "sa_out";
- ctx->sa_out = sa_create(name, socket_id);
- if (ctx->sa_out == NULL)
- rte_exit(EXIT_FAILURE, "Error [%d] creating SA context %s "
- "in socket %d\n", rte_errno, name, socket_id);
+ sa_in_add_rules(ctx->sa_in, sa_in, nb_sa_in);
+ } else
+ RTE_LOG(WARNING, IPSEC, "No SA Inbound rule specified\n");
- sa_in_add_rules(ctx->sa_in, sa_in_entries, nb_in_entries);
+ if (nb_sa_out > 0) {
+ name = "sa_out";
+ ctx->sa_out = sa_create(name, socket_id);
+ if (ctx->sa_out == NULL)
+ rte_exit(EXIT_FAILURE, "Error [%d] creating SA "
+ "context %s in socket %d\n", rte_errno,
+ name, socket_id);
- sa_out_add_rules(ctx->sa_out, sa_out_entries, nb_out_entries);
+ sa_out_add_rules(ctx->sa_out, sa_out, nb_sa_out);
+ } else
+ RTE_LOG(WARNING, IPSEC, "No SA Outbound rule "
+ "specified\n");
}
int
diff --git a/examples/ipsec-secgw/sp4.c b/examples/ipsec-secgw/sp4.c
index 9c4b256..38c72a9 100644
--- a/examples/ipsec-secgw/sp4.c
+++ b/examples/ipsec-secgw/sp4.c
@@ -42,8 +42,9 @@
#include <rte_ip.h>
#include "ipsec.h"
+#include "parser.h"
-#define MAX_ACL_RULE_NUM 1000
+#define MAX_ACL_RULE_NUM 1024
/*
* Rule and trace formats definitions.
@@ -113,211 +114,306 @@ struct rte_acl_field_def ip4_defs[NUM_FIELDS_IPV4] = {
RTE_ACL_RULE_DEF(acl4_rules, RTE_DIM(ip4_defs));
-const struct acl4_rules acl4_rules_out[] = {
- {
- .data = {.userdata = PROTECT(5), .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 105, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(6), .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 106, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(10), .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 175, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(11), .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 176, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(15), .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 200, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(16), .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 201, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(25), .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 55, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(26), .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 56, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = BYPASS, .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 240, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = BYPASS, .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 241, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
+struct acl4_rules acl4_rules_out[MAX_ACL_RULE_NUM];
+uint32_t nb_acl4_rules_out;
+
+struct acl4_rules acl4_rules_in[MAX_ACL_RULE_NUM];
+uint32_t nb_acl4_rules_in;
+
+void
+parse_sp4_tokens(char **tokens, uint32_t n_tokens,
+ struct parse_status *status)
+{
+ struct acl4_rules *rule_ipv4 = NULL;
+
+ uint32_t *ri = NULL; /* rule index */
+ uint32_t ti = 0; /* token index */
+
+ uint32_t esp_p = 0;
+ uint32_t protect_p = 0;
+ uint32_t bypass_p = 0;
+ uint32_t discard_p = 0;
+ uint32_t pri_p = 0;
+ uint32_t src_p = 0;
+ uint32_t dst_p = 0;
+ uint32_t proto_p = 0;
+ uint32_t sport_p = 0;
+ uint32_t dport_p = 0;
+
+ if (strcmp(tokens[1], "in") == 0) {
+ ri = &nb_acl4_rules_in;
+
+ APP_CHECK(*ri <= MAX_ACL_RULE_NUM - 1, status,
+ "too many sp rules, abort insertion\n");
+ if (status->status < 0)
+ return;
+
+ rule_ipv4 = &acl4_rules_in[*ri];
+
+ } else if (strcmp(tokens[1], "out") == 0) {
+ ri = &nb_acl4_rules_out;
+
+ APP_CHECK(*ri <= MAX_ACL_RULE_NUM - 1, status,
+ "too many sp rules, abort insertion\n");
+ if (status->status < 0)
+ return;
+
+ rule_ipv4 = &acl4_rules_out[*ri];
+ } else {
+ APP_CHECK(0, status, "unrecognized input \"%s\", expect"
+ " \"in\" or \"out\"\n", tokens[ti]);
+ return;
}
-};
-const struct acl4_rules acl4_rules_in[] = {
- {
- .data = {.userdata = PROTECT(105), .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 115, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(106), .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 116, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(110), .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 185, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(111), .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 186, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(115), .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 210, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(116), .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 211, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(125), .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 65, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(126), .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 66, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = BYPASS, .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 245, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = BYPASS, .category_mask = 1, .priority = 1},
- /* destination IPv4 */
- .field[2] = {.value.u32 = IPv4(192, 168, 246, 0),
- .mask_range.u32 = 24,},
- /* source port */
- .field[3] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[4] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
+ rule_ipv4->data.category_mask = 1;
+
+ for (ti = 2; ti < n_tokens; ti++) {
+ if (strcmp(tokens[ti], "esp") == 0) {
+ /* currently do nothing */
+ APP_CHECK_PRESENCE(esp_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ esp_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "protect") == 0) {
+ APP_CHECK_PRESENCE(protect_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ APP_CHECK(bypass_p == 0, status, "conflict item "
+ "between \"%s\" and \"%s\"", tokens[ti],
+ "bypass");
+ if (status->status < 0)
+ return;
+ APP_CHECK(discard_p == 0, status, "conflict item "
+ "between \"%s\" and \"%s\"", tokens[ti],
+ "discard");
+ if (status->status < 0)
+ return;
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+ APP_CHECK_TOKEN_IS_NUM(tokens, ti, status);
+ if (status->status < 0)
+ return;
+
+ rule_ipv4->data.userdata =
+ PROTECT(atoi(tokens[ti]));
+
+ protect_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "bypass") == 0) {
+ APP_CHECK_PRESENCE(bypass_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ APP_CHECK(protect_p == 0, status, "conflict item "
+ "between \"%s\" and \"%s\"", tokens[ti],
+ "protect");
+ if (status->status < 0)
+ return;
+ APP_CHECK(discard_p == 0, status, "conflict item "
+ "between \"%s\" and \"%s\"", tokens[ti],
+ "discard");
+ if (status->status < 0)
+ return;
+
+ rule_ipv4->data.userdata = BYPASS;
+
+ bypass_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "discard") == 0) {
+ APP_CHECK_PRESENCE(discard_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ APP_CHECK(protect_p == 0, status, "conflict item "
+ "between \"%s\" and \"%s\"", tokens[ti],
+ "protect");
+ if (status->status < 0)
+ return;
+ APP_CHECK(bypass_p == 0, status, "conflict item "
+ "between \"%s\" and \"%s\"", tokens[ti],
+ "discard");
+ if (status->status < 0)
+ return;
+
+ rule_ipv4->data.userdata = DISCARD;
+
+ discard_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "pri") == 0) {
+ APP_CHECK_PRESENCE(pri_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+ APP_CHECK_TOKEN_IS_NUM(tokens, ti, status);
+ if (status->status < 0)
+ return;
+
+ rule_ipv4->data.priority = atoi(tokens[ti]);
+
+ pri_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "src") == 0) {
+ struct in_addr ip;
+ uint32_t depth;
+
+ APP_CHECK_PRESENCE(src_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+
+ APP_CHECK(parse_ipv4_addr(tokens[ti], &ip,
+ &depth) == 0, status, "unrecognized "
+ "input \"%s\", expect valid ipv4 addr",
+ tokens[ti]);
+ if (status->status < 0)
+ return;
+
+ rule_ipv4->field[1].value.u32 =
+ rte_bswap32(ip.s_addr);
+ rule_ipv4->field[1].mask_range.u32 =
+ depth;
+
+ src_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "dst") == 0) {
+ struct in_addr ip;
+ uint32_t depth;
+
+ APP_CHECK_PRESENCE(dst_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+ APP_CHECK(parse_ipv4_addr(tokens[ti], &ip,
+ &depth) == 0, status, "unrecognized "
+ "input \"%s\", expect valid ipv4 addr",
+ tokens[ti]);
+ if (status->status < 0)
+ return;
+
+ rule_ipv4->field[2].value.u32 =
+ rte_bswap32(ip.s_addr);
+ rule_ipv4->field[2].mask_range.u32 =
+ depth;
+
+ dst_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "proto") == 0) {
+ uint16_t low, high;
+
+ APP_CHECK_PRESENCE(proto_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+
+ APP_CHECK(parse_range(tokens[ti], &low, &high)
+ == 0, status, "unrecognized input \"%s\""
+ ", expect \"from:to\"", tokens[ti]);
+ if (status->status < 0)
+ return;
+ APP_CHECK(low <= 0xff, status, "proto low "
+ "over-limit");
+ if (status->status < 0)
+ return;
+ APP_CHECK(high <= 0xff, status, "proto high "
+ "over-limit");
+ if (status->status < 0)
+ return;
+
+ rule_ipv4->field[0].value.u8 = (uint8_t)low;
+ rule_ipv4->field[0].mask_range.u8 = (uint8_t)high;
+
+ proto_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "sport") == 0) {
+ uint16_t port_low, port_high;
+
+ APP_CHECK_PRESENCE(sport_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+
+ APP_CHECK(parse_range(tokens[ti], &port_low,
+ &port_high) == 0, status, "unrecognized "
+ "input \"%s\", expect \"port_from:"
+ "port_to\"", tokens[ti]);
+ if (status->status < 0)
+ return;
+
+ rule_ipv4->field[3].value.u16 = port_low;
+ rule_ipv4->field[3].mask_range.u16 = port_high;
+
+ sport_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "dport") == 0) {
+ uint16_t port_low, port_high;
+
+ APP_CHECK_PRESENCE(dport_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+
+ APP_CHECK(parse_range(tokens[ti], &port_low,
+ &port_high) == 0, status, "unrecognized "
+ "input \"%s\", expect \"port_from:"
+ "port_to\"", tokens[ti]);
+ if (status->status < 0)
+ return;
+
+ rule_ipv4->field[4].value.u16 = port_low;
+ rule_ipv4->field[4].mask_range.u16 = port_high;
+
+ dport_p = 1;
+ continue;
+ }
+
+ /* unrecognizeable input */
+ APP_CHECK(0, status, "unrecognized input \"%s\"",
+ tokens[ti]);
+ return;
}
-};
+
+ /* check if argument(s) are missing */
+ APP_CHECK(esp_p == 1, status, "missing argument \"esp\"");
+ if (status->status < 0)
+ return;
+
+ APP_CHECK(protect_p | bypass_p | discard_p, status, "missing "
+ "argument \"protect\", \"bypass\", or \"discard\"");
+ if (status->status < 0)
+ return;
+
+ *ri = *ri + 1;
+}
static void
print_one_ip4_rule(const struct acl4_rules *rule, int32_t extra)
@@ -406,11 +502,9 @@ acl4_init(const char *name, int32_t socketid, const struct acl4_rules *rules,
}
void
-sp4_init(struct socket_ctx *ctx, int32_t socket_id, uint32_t ep)
+sp4_init(struct socket_ctx *ctx, int32_t socket_id)
{
const char *name;
- const struct acl4_rules *rules_out, *rules_in;
- uint32_t nb_out_rules, nb_in_rules;
if (ctx == NULL)
rte_exit(EXIT_FAILURE, "NULL context.\n");
@@ -423,25 +517,19 @@ sp4_init(struct socket_ctx *ctx, int32_t socket_id, uint32_t ep)
rte_exit(EXIT_FAILURE, "Outbound SP DB for socket %u already "
"initialized\n", socket_id);
- if (ep == 0) {
- rules_out = acl4_rules_out;
- nb_out_rules = RTE_DIM(acl4_rules_out);
- rules_in = acl4_rules_in;
- nb_in_rules = RTE_DIM(acl4_rules_in);
- } else if (ep == 1) {
- rules_out = acl4_rules_in;
- nb_out_rules = RTE_DIM(acl4_rules_in);
- rules_in = acl4_rules_out;
- nb_in_rules = RTE_DIM(acl4_rules_out);
+ if (nb_acl4_rules_in > 0) {
+ name = "sp_ip4_in";
+ ctx->sp_ip4_in = (struct sp_ctx *)acl4_init(name,
+ socket_id, acl4_rules_in, nb_acl4_rules_in);
} else
- rte_exit(EXIT_FAILURE, "Invalid EP value %u. "
- "Only 0 or 1 supported.\n", ep);
-
- name = "sp_ip4_in";
- ctx->sp_ip4_in = (struct sp_ctx *)acl4_init(name, socket_id,
- rules_in, nb_in_rules);
+ RTE_LOG(WARNING, IPSEC, "No IPv4 SP Inbound rule "
+ "specified\n");
- name = "sp_ip4_out";
- ctx->sp_ip4_out = (struct sp_ctx *)acl4_init(name, socket_id,
- rules_out, nb_out_rules);
+ if (nb_acl4_rules_out > 0) {
+ name = "sp_ip4_out";
+ ctx->sp_ip4_out = (struct sp_ctx *)acl4_init(name,
+ socket_id, acl4_rules_out, nb_acl4_rules_out);
+ } else
+ RTE_LOG(WARNING, IPSEC, "No IPv4 SP Outbound rule "
+ "specified\n");
}
diff --git a/examples/ipsec-secgw/sp6.c b/examples/ipsec-secgw/sp6.c
index 1dda11a..62fb492 100644
--- a/examples/ipsec-secgw/sp6.c
+++ b/examples/ipsec-secgw/sp6.c
@@ -42,8 +42,9 @@
#include <rte_ip.h>
#include "ipsec.h"
+#include "parser.h"
-#define MAX_ACL_RULE_NUM 1000
+#define MAX_ACL_RULE_NUM 1024
enum {
IP6_PROTO,
@@ -144,155 +145,363 @@ struct rte_acl_field_def ip6_defs[IP6_NUM] = {
RTE_ACL_RULE_DEF(acl6_rules, RTE_DIM(ip6_defs));
-const struct acl6_rules acl6_rules_out[] = {
- {
- .data = {.userdata = PROTECT(5), .category_mask = 1, .priority = 1},
- /* destination IPv6 */
- .field[5] = {.value.u32 = 0x0, .mask_range.u32 = 32,},
- .field[6] = {.value.u32 = 0x0, .mask_range.u32 = 32,},
- .field[7] = {.value.u32 = 0x55555555, .mask_range.u32 = 32,},
- .field[8] = {.value.u32 = 0x0, .mask_range.u32 = 0,},
- /* source port */
- .field[9] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[10] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(6), .category_mask = 1, .priority = 1},
- /* destination IPv6 */
- .field[5] = {.value.u32 = 0x0, .mask_range.u32 = 32,},
- .field[6] = {.value.u32 = 0x0, .mask_range.u32 = 32,},
- .field[7] = {.value.u32 = 0x66666666, .mask_range.u32 = 32,},
- .field[8] = {.value.u32 = 0x0, .mask_range.u32 = 0,},
- /* source port */
- .field[9] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[10] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(10), .category_mask = 1, .priority = 1},
- /* destination IPv6 */
- .field[5] = {.value.u32 = 0x0, .mask_range.u32 = 32,},
- .field[6] = {.value.u32 = 0x11111111, .mask_range.u32 = 32,},
- .field[7] = {.value.u32 = 0x00000000, .mask_range.u32 = 32,},
- .field[8] = {.value.u32 = 0x0, .mask_range.u32 = 0,},
- /* source port */
- .field[9] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[10] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(11), .category_mask = 1, .priority = 1},
- /* destination IPv6 */
- .field[5] = {.value.u32 = 0x0, .mask_range.u32 = 32,},
- .field[6] = {.value.u32 = 0x11111111, .mask_range.u32 = 32,},
- .field[7] = {.value.u32 = 0x11111111, .mask_range.u32 = 32,},
- .field[8] = {.value.u32 = 0x0, .mask_range.u32 = 0,},
- /* source port */
- .field[9] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[10] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(25), .category_mask = 1, .priority = 1},
- /* destination IPv6 */
- .field[5] = {.value.u32 = 0x0, .mask_range.u32 = 32,},
- .field[6] = {.value.u32 = 0x0, .mask_range.u32 = 32,},
- .field[7] = {.value.u32 = 0xaaaaaaaa, .mask_range.u32 = 32,},
- .field[8] = {.value.u32 = 0x0, .mask_range.u32 = 0,},
- /* source port */
- .field[9] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[10] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(26), .category_mask = 1, .priority = 1},
- /* destination IPv6 */
- .field[5] = {.value.u32 = 0x0, .mask_range.u32 = 32,},
- .field[6] = {.value.u32 = 0x0, .mask_range.u32 = 32,},
- .field[7] = {.value.u32 = 0xbbbbbbbb, .mask_range.u32 = 32,},
- .field[8] = {.value.u32 = 0x0, .mask_range.u32 = 0,},
- /* source port */
- .field[9] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[10] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
+struct acl6_rules acl6_rules_out[MAX_ACL_RULE_NUM];
+uint32_t nb_acl6_rules_out;
+
+struct acl6_rules acl6_rules_in[MAX_ACL_RULE_NUM];
+uint32_t nb_acl6_rules_in;
+
+void
+parse_sp6_tokens(char **tokens, uint32_t n_tokens,
+ struct parse_status *status)
+{
+ struct acl6_rules *rule_ipv6 = NULL;
+
+ uint32_t *ri = NULL; /* rule index */
+ uint32_t ti = 0; /* token index */
+
+ uint32_t esp_p = 0;
+ uint32_t protect_p = 0;
+ uint32_t bypass_p = 0;
+ uint32_t discard_p = 0;
+ uint32_t pri_p = 0;
+ uint32_t src_p = 0;
+ uint32_t dst_p = 0;
+ uint32_t proto_p = 0;
+ uint32_t sport_p = 0;
+ uint32_t dport_p = 0;
+
+ if (strcmp(tokens[1], "in") == 0) {
+ ri = &nb_acl6_rules_in;
+
+ APP_CHECK(*ri <= MAX_ACL_RULE_NUM - 1, status, "too "
+ "many sp rules, abort insertion\n");
+ if (status->status < 0)
+ return;
+
+ rule_ipv6 = &acl6_rules_in[*ri];
+
+ } else if (strcmp(tokens[1], "out") == 0) {
+ ri = &nb_acl6_rules_out;
+
+ APP_CHECK(*ri <= MAX_ACL_RULE_NUM - 1, status, "too "
+ "many sp rules, abort insertion\n");
+ if (status->status < 0)
+ return;
+
+ rule_ipv6 = &acl6_rules_out[*ri];
+
+ } else {
+ APP_CHECK(0, status, "unrecognized input \"%s\", expect"
+ " \"in\" or \"out\"\n", tokens[ti]);
+ return;
}
-};
-const struct acl6_rules acl6_rules_in[] = {
- {
- .data = {.userdata = PROTECT(15), .category_mask = 1, .priority = 1},
- /* destination IPv6 */
- .field[5] = {.value.u32 = 0xffff0000, .mask_range.u32 = 32,},
- .field[6] = {.value.u32 = 0x0, .mask_range.u32 = 32,},
- .field[7] = {.value.u32 = 0x55555555, .mask_range.u32 = 32,},
- .field[8] = {.value.u32 = 0x0, .mask_range.u32 = 0,},
- /* source port */
- .field[9] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[10] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(16), .category_mask = 1, .priority = 1},
- /* destination IPv6 */
- .field[5] = {.value.u32 = 0xffff0000, .mask_range.u32 = 32,},
- .field[6] = {.value.u32 = 0x0, .mask_range.u32 = 32,},
- .field[7] = {.value.u32 = 0x66666666, .mask_range.u32 = 32,},
- .field[8] = {.value.u32 = 0x0, .mask_range.u32 = 0,},
- /* source port */
- .field[9] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[10] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(110), .category_mask = 1, .priority = 1},
- /* destination IPv6 */
- .field[5] = {.value.u32 = 0xffff0000, .mask_range.u32 = 32,},
- .field[6] = {.value.u32 = 0x11111111, .mask_range.u32 = 32,},
- .field[7] = {.value.u32 = 0x00000000, .mask_range.u32 = 32,},
- .field[8] = {.value.u32 = 0x0, .mask_range.u32 = 0,},
- /* source port */
- .field[9] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[10] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(111), .category_mask = 1, .priority = 1},
- /* destination IPv6 */
- .field[5] = {.value.u32 = 0xffff0000, .mask_range.u32 = 32,},
- .field[6] = {.value.u32 = 0x11111111, .mask_range.u32 = 32,},
- .field[7] = {.value.u32 = 0x11111111, .mask_range.u32 = 32,},
- .field[8] = {.value.u32 = 0x0, .mask_range.u32 = 0,},
- /* source port */
- .field[9] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[10] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(125), .category_mask = 1, .priority = 1},
- /* destination IPv6 */
- .field[5] = {.value.u32 = 0xffff0000, .mask_range.u32 = 32,},
- .field[6] = {.value.u32 = 0x0, .mask_range.u32 = 32,},
- .field[7] = {.value.u32 = 0xaaaaaaaa, .mask_range.u32 = 32,},
- .field[8] = {.value.u32 = 0x0, .mask_range.u32 = 0,},
- /* source port */
- .field[9] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[10] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
- },
- {
- .data = {.userdata = PROTECT(126), .category_mask = 1, .priority = 1},
- /* destination IPv6 */
- .field[5] = {.value.u32 = 0xffff0000, .mask_range.u32 = 32,},
- .field[6] = {.value.u32 = 0x0, .mask_range.u32 = 32,},
- .field[7] = {.value.u32 = 0xbbbbbbbb, .mask_range.u32 = 32,},
- .field[8] = {.value.u32 = 0x0, .mask_range.u32 = 0,},
- /* source port */
- .field[9] = {.value.u16 = 0, .mask_range.u16 = 0xffff,},
- /* destination port */
- .field[10] = {.value.u16 = 0, .mask_range.u16 = 0xffff,}
+ rule_ipv6->data.category_mask = 1;
+
+
+ for (ti = 2; ti < n_tokens; ti++) {
+ if (strcmp(tokens[ti], "esp") == 0) {
+ /* currently do nothing */
+ APP_CHECK_PRESENCE(esp_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ esp_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "protect") == 0) {
+ APP_CHECK_PRESENCE(protect_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ APP_CHECK(bypass_p == 0, status, "conflict item "
+ "between \"%s\" and \"%s\"", tokens[ti],
+ "bypass");
+ if (status->status < 0)
+ return;
+ APP_CHECK(discard_p == 0, status, "conflict item "
+ "between \"%s\" and \"%s\"", tokens[ti],
+ "discard");
+ if (status->status < 0)
+ return;
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+ APP_CHECK_TOKEN_IS_NUM(tokens, ti, status);
+ if (status->status < 0)
+ return;
+
+ rule_ipv6->data.userdata =
+ PROTECT(atoi(tokens[ti]));
+
+ protect_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "bypass") == 0) {
+ APP_CHECK_PRESENCE(bypass_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ APP_CHECK(protect_p == 0, status, "conflict item "
+ "between \"%s\" and \"%s\"", tokens[ti],
+ "protect");
+ if (status->status < 0)
+ return;
+ APP_CHECK(discard_p == 0, status, "conflict item "
+ "between \"%s\" and \"%s\"", tokens[ti],
+ "discard");
+ if (status->status < 0)
+ return;
+
+ rule_ipv6->data.userdata = BYPASS;
+
+ bypass_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "discard") == 0) {
+ APP_CHECK_PRESENCE(discard_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ APP_CHECK(protect_p == 0, status, "conflict item "
+ "between \"%s\" and \"%s\"", tokens[ti],
+ "protect");
+ if (status->status < 0)
+ return;
+ APP_CHECK(bypass_p == 0, status, "conflict item "
+ "between \"%s\" and \"%s\"", tokens[ti],
+ "discard");
+ if (status->status < 0)
+ return;
+
+ rule_ipv6->data.userdata = DISCARD;
+
+ discard_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "pri") == 0) {
+ APP_CHECK_PRESENCE(pri_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+ APP_CHECK_TOKEN_IS_NUM(tokens, ti, status);
+ if (status->status < 0)
+ return;
+
+ rule_ipv6->data.priority = atoi(tokens[ti]);
+
+ pri_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "src") == 0) {
+ struct in6_addr ip;
+ uint32_t depth;
+
+ APP_CHECK_PRESENCE(src_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+
+ APP_CHECK(parse_ipv6_addr(tokens[ti], &ip,
+ &depth) == 0, status, "unrecognized "
+ "input \"%s\", expect valid ipv6 "
+ "addr", tokens[ti]);
+ if (status->status < 0)
+ return;
+
+ rule_ipv6->field[1].value.u32 =
+ (uint32_t)ip.s6_addr[0] << 24 |
+ (uint32_t)ip.s6_addr[1] << 16 |
+ (uint32_t)ip.s6_addr[2] << 8 |
+ (uint32_t)ip.s6_addr[3];
+ rule_ipv6->field[1].mask_range.u32 =
+ (depth > 32) ? 32 : depth;
+ depth = (depth > 32) ? (depth - 32) : 0;
+ rule_ipv6->field[2].value.u32 =
+ (uint32_t)ip.s6_addr[4] << 24 |
+ (uint32_t)ip.s6_addr[5] << 16 |
+ (uint32_t)ip.s6_addr[6] << 8 |
+ (uint32_t)ip.s6_addr[7];
+ rule_ipv6->field[2].mask_range.u32 =
+ (depth > 32) ? 32 : depth;
+ depth = (depth > 32) ? (depth - 32) : 0;
+ rule_ipv6->field[3].value.u32 =
+ (uint32_t)ip.s6_addr[8] << 24 |
+ (uint32_t)ip.s6_addr[9] << 16 |
+ (uint32_t)ip.s6_addr[10] << 8 |
+ (uint32_t)ip.s6_addr[11];
+ rule_ipv6->field[3].mask_range.u32 =
+ (depth > 32) ? 32 : depth;
+ depth = (depth > 32) ? (depth - 32) : 0;
+ rule_ipv6->field[4].value.u32 =
+ (uint32_t)ip.s6_addr[12] << 24 |
+ (uint32_t)ip.s6_addr[13] << 16 |
+ (uint32_t)ip.s6_addr[14] << 8 |
+ (uint32_t)ip.s6_addr[15];
+ rule_ipv6->field[4].mask_range.u32 =
+ (depth > 32) ? 32 : depth;
+
+ src_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "dst") == 0) {
+ struct in6_addr ip;
+ uint32_t depth;
+
+ APP_CHECK_PRESENCE(dst_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+
+ APP_CHECK(parse_ipv6_addr(tokens[ti], &ip,
+ &depth) == 0, status, "unrecognized "
+ "input \"%s\", expect valid ipv6 "
+ "addr", tokens[ti]);
+ if (status->status < 0)
+ return;
+
+ rule_ipv6->field[5].value.u32 =
+ (uint32_t)ip.s6_addr[0] << 24 |
+ (uint32_t)ip.s6_addr[1] << 16 |
+ (uint32_t)ip.s6_addr[2] << 8 |
+ (uint32_t)ip.s6_addr[3];
+ rule_ipv6->field[5].mask_range.u32 =
+ (depth > 32) ? 32 : depth;
+ depth = (depth > 32) ? (depth - 32) : 0;
+ rule_ipv6->field[6].value.u32 =
+ (uint32_t)ip.s6_addr[4] << 24 |
+ (uint32_t)ip.s6_addr[5] << 16 |
+ (uint32_t)ip.s6_addr[6] << 8 |
+ (uint32_t)ip.s6_addr[7];
+ rule_ipv6->field[6].mask_range.u32 =
+ (depth > 32) ? 32 : depth;
+ depth = (depth > 32) ? (depth - 32) : 0;
+ rule_ipv6->field[7].value.u32 =
+ (uint32_t)ip.s6_addr[8] << 24 |
+ (uint32_t)ip.s6_addr[9] << 16 |
+ (uint32_t)ip.s6_addr[10] << 8 |
+ (uint32_t)ip.s6_addr[11];
+ rule_ipv6->field[7].mask_range.u32 =
+ (depth > 32) ? 32 : depth;
+ depth = (depth > 32) ? (depth - 32) : 0;
+ rule_ipv6->field[8].value.u32 =
+ (uint32_t)ip.s6_addr[12] << 24 |
+ (uint32_t)ip.s6_addr[13] << 16 |
+ (uint32_t)ip.s6_addr[14] << 8 |
+ (uint32_t)ip.s6_addr[15];
+ rule_ipv6->field[8].mask_range.u32 =
+ (depth > 32) ? 32 : depth;
+
+ dst_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "proto") == 0) {
+ uint16_t low, high;
+
+ APP_CHECK_PRESENCE(proto_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+
+ APP_CHECK(parse_range(tokens[ti], &low, &high)
+ == 0, status, "unrecognized input \"%s\""
+ ", expect \"from:to\"", tokens[ti]);
+ if (status->status < 0)
+ return;
+ APP_CHECK(low <= 0xff, status, "proto low "
+ "over-limit");
+ if (status->status < 0)
+ return;
+ APP_CHECK(high <= 0xff, status, "proto high "
+ "over-limit");
+ if (status->status < 0)
+ return;
+
+ rule_ipv6->field[0].value.u8 = (uint8_t)low;
+ rule_ipv6->field[0].mask_range.u8 = (uint8_t)high;
+
+ proto_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "sport") == 0) {
+ uint16_t port_low, port_high;
+
+ APP_CHECK_PRESENCE(sport_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+
+ APP_CHECK(parse_range(tokens[ti], &port_low,
+ &port_high) == 0, status, "unrecognized "
+ "input \"%s\", expect \"port_from:"
+ "port_to\"", tokens[ti]);
+ if (status->status < 0)
+ return;
+
+ rule_ipv6->field[9].value.u16 = port_low;
+ rule_ipv6->field[9].mask_range.u16 = port_high;
+
+ sport_p = 1;
+ continue;
+ }
+
+ if (strcmp(tokens[ti], "dport") == 0) {
+ uint16_t port_low, port_high;
+
+ APP_CHECK_PRESENCE(dport_p, tokens[ti], status);
+ if (status->status < 0)
+ return;
+ INCREMENT_TOKEN_INDEX(ti, n_tokens, status);
+ if (status->status < 0)
+ return;
+
+ APP_CHECK(parse_range(tokens[ti], &port_low,
+ &port_high) == 0, status, "unrecognized "
+ "input \"%s\", expect \"port_from:"
+ "port_to\"", tokens[ti]);
+ if (status->status < 0)
+ return;
+
+ rule_ipv6->field[10].value.u16 = port_low;
+ rule_ipv6->field[10].mask_range.u16 = port_high;
+
+ dport_p = 1;
+ continue;
+ }
+
+ /* unrecognizeable input */
+ APP_CHECK(0, status, "unrecognized input \"%s\"",
+ tokens[ti]);
+ return;
}
-};
+
+ /* check if argument(s) are missing */
+ APP_CHECK(esp_p == 1, status, "missing argument \"esp\"");
+ if (status->status < 0)
+ return;
+
+ APP_CHECK(protect_p | bypass_p | discard_p, status, "missing "
+ "argument \"protect\", \"bypass\", or \"discard\"");
+ if (status->status < 0)
+ return;
+
+ *ri = *ri + 1;
+}
static inline void
print_one_ip6_rule(const struct acl6_rules *rule, int32_t extra)
@@ -407,11 +616,9 @@ acl6_init(const char *name, int32_t socketid, const struct acl6_rules *rules,
}
void
-sp6_init(struct socket_ctx *ctx, int32_t socket_id, uint32_t ep)
+sp6_init(struct socket_ctx *ctx, int32_t socket_id)
{
const char *name;
- const struct acl6_rules *rules_out, *rules_in;
- uint32_t nb_out_rules, nb_in_rules;
if (ctx == NULL)
rte_exit(EXIT_FAILURE, "NULL context.\n");
@@ -424,25 +631,19 @@ sp6_init(struct socket_ctx *ctx, int32_t socket_id, uint32_t ep)
rte_exit(EXIT_FAILURE, "Outbound IPv6 SP DB for socket %u "
"already initialized\n", socket_id);
- if (ep == 0) {
- rules_out = acl6_rules_out;
- nb_out_rules = RTE_DIM(acl6_rules_out);
- rules_in = acl6_rules_in;
- nb_in_rules = RTE_DIM(acl6_rules_in);
- } else if (ep == 1) {
- rules_out = acl6_rules_in;
- nb_out_rules = RTE_DIM(acl6_rules_in);
- rules_in = acl6_rules_out;
- nb_in_rules = RTE_DIM(acl6_rules_out);
+ if (nb_acl6_rules_in > 0) {
+ name = "sp_ip6_in";
+ ctx->sp_ip6_in = (struct sp_ctx *)acl6_init(name,
+ socket_id, acl6_rules_in, nb_acl6_rules_in);
} else
- rte_exit(EXIT_FAILURE, "Invalid EP value %u. "
- "Only 0 or 1 supported.\n", ep);
+ RTE_LOG(WARNING, IPSEC, "No IPv6 SP Inbound rule "
+ "specified\n");
- name = "sp_ip6_in";
- ctx->sp_ip6_in = (struct sp_ctx *)acl6_init(name, socket_id,
- rules_in, nb_in_rules);
-
- name = "sp_ip6_out";
- ctx->sp_ip6_out = (struct sp_ctx *)acl6_init(name, socket_id,
- rules_out, nb_out_rules);
+ if (nb_acl6_rules_out > 0) {
+ name = "sp_ip6_out";
+ ctx->sp_ip6_out = (struct sp_ctx *)acl6_init(name,
+ socket_id, acl6_rules_out, nb_acl6_rules_out);
+ } else
+ RTE_LOG(WARNING, IPSEC, "No IPv6 SP Outbound rule "
+ "specified\n");
}
--
2.5.5
next prev parent reply other threads:[~2016-09-20 11:13 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-07 11:31 [dpdk-dev] [PATCH 0/2] examples/ipsec_secgw: " Fan Zhang
2016-07-07 11:31 ` [dpdk-dev] [PATCH 1/2] " Fan Zhang
2016-07-07 11:31 ` [dpdk-dev] [PATCH 2/2] examples/ipsec-secgw: add sample configuration files Fan Zhang
2016-07-11 14:43 ` [dpdk-dev] [PATCH v2 0/2] examples/ipsec_secgw: add configuration file support Fan Zhang
2016-07-11 14:43 ` [dpdk-dev] [PATCH v2 1/2] examples/ipsec-secgw: " Fan Zhang
2016-07-11 15:19 ` Thomas Monjalon
2016-07-11 14:43 ` [dpdk-dev] [PATCH v2 2/2] examples/ipsec-secgw: add sample configuration files Fan Zhang
2016-07-12 9:44 ` [dpdk-dev] [PATCH v3 0/2] examples/ipsec_secgw: add configuration file support Fan Zhang
2016-07-12 9:44 ` [dpdk-dev] [PATCH v3 1/2] examples/ipsec-secgw: " Fan Zhang
2016-07-19 8:19 ` Sergio Gonzalez Monroy
2016-07-12 9:44 ` [dpdk-dev] [PATCH v3 2/2] examples/ipsec-secgw: add sample configuration files Fan Zhang
2016-07-21 10:51 ` [dpdk-dev] [PATCH v4 0/2] examples/ipsec_secgw: add configuration file support Fan Zhang
2016-07-21 10:51 ` [dpdk-dev] [PATCH v4 1/2] examples/ipsec-secgw: " Fan Zhang
2016-07-21 10:51 ` [dpdk-dev] [PATCH v4 2/2] examples/ipsec-secgw: add sample configuration files Fan Zhang
2016-08-22 10:49 ` [dpdk-dev] [PATCH 0/2] examples/ipsec_secgw: add configuration file support Fan Zhang
2016-08-22 10:49 ` [dpdk-dev] [PATCH 1/2] examples/ipsec-secgw: " Fan Zhang
2016-08-22 10:49 ` [dpdk-dev] [PATCH 2/2] examples/ipsec-secgw: add sample configuration files Fan Zhang
2016-08-23 14:46 ` [dpdk-dev] [PATCH v6 0/2] [PATCH 0/2] examples/ipsec_secgw: add configuration file support Fan Zhang
2016-08-23 14:46 ` [dpdk-dev] [PATCH v6 1/2] examples/ipsec-secgw: " Fan Zhang
2016-09-07 18:13 ` De Lara Guarch, Pablo
2016-08-23 14:46 ` [dpdk-dev] [PATCH v6 2/2] examples/ipsec-secgw: add sample configuration files Fan Zhang
2016-09-20 11:13 ` [dpdk-dev] [PATCH v7 0/2] examples/ipsec_secgw: add configuration file support Fan Zhang
2016-09-20 11:13 ` Fan Zhang [this message]
2016-09-20 11:13 ` [dpdk-dev] [PATCH v7 2/2] examples/ipsec-secgw: add sample configuration files Fan Zhang
2016-09-21 12:05 ` [dpdk-dev] [PATCH v8 0/2] examples/ipsec_secgw: add configuration file support Fan Zhang
2016-09-21 12:05 ` [dpdk-dev] [PATCH v8 1/2] examples/ipsec-secgw: " Fan Zhang
2016-09-23 7:52 ` Sergio Gonzalez Monroy
2016-09-23 22:51 ` De Lara Guarch, Pablo
2016-09-29 1:19 ` Chen, Zhaoyan
2016-09-21 12:05 ` [dpdk-dev] [PATCH v8 2/2] examples/ipsec-secgw: add sample configuration files Fan Zhang
2016-09-23 7:53 ` Sergio Gonzalez Monroy
2016-09-23 22:51 ` De Lara Guarch, Pablo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474369985-55073-2-git-send-email-roy.fan.zhang@intel.com \
--to=roy.fan.zhang@intel.com \
--cc=dev@dpdk.org \
--cc=sergio.gonzalez.monroy@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).