From: Xiao Wang <xiao.w.wang@intel.com>
To: wenzhuo.lu@intel.com
Cc: dev@dpdk.org, ferruh.yigit@intel.com, Xiao Wang <xiao.w.wang@intel.com>
Subject: [dpdk-dev] [PATCH v2 37/40] net/ixgbe/base: clean code of flow control autoneg
Date: Sun, 25 Sep 2016 17:00:14 +0800 [thread overview]
Message-ID: <1474794017-5896-38-git-send-email-xiao.w.wang@intel.com> (raw)
In-Reply-To: <1474794017-5896-1-git-send-email-xiao.w.wang@intel.com>
Support for flow control auto negotiation is defeatured from X550em_a
fiber when connected to speeds lower than 10Gbps. This patch cleans up
the code path which is mostly dead to begin with.
- add device IDs check in ixgbe_device_supports_autoneg_fc().
- ixgbe_fc_autoneg_fiber_x550em_a() is now used only to pass the user
settings to ixgbe_fc_enable_generic().
- make sure that start_hw does not fail when setup_fc is not implemented.
- small fix in the debug message when ixgbe_device_supports_autoneg_fc()
returns false.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
---
v2: - Removed the unrelated minor modifications from this patch.
---
drivers/net/ixgbe/base/ixgbe_common.c | 37 ++++---
drivers/net/ixgbe/base/ixgbe_x550.c | 188 +---------------------------------
2 files changed, 28 insertions(+), 197 deletions(-)
diff --git a/drivers/net/ixgbe/base/ixgbe_common.c b/drivers/net/ixgbe/base/ixgbe_common.c
index 0eb2166..e0dc3b5 100644
--- a/drivers/net/ixgbe/base/ixgbe_common.c
+++ b/drivers/net/ixgbe/base/ixgbe_common.c
@@ -168,13 +168,24 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
switch (hw->phy.media_type) {
case ixgbe_media_type_fiber_qsfp:
case ixgbe_media_type_fiber:
- hw->mac.ops.check_link(hw, &speed, &link_up, false);
- /* if link is down, assume supported */
- if (link_up)
- supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
+ /* flow control autoneg black list */
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_X550EM_A_SFP:
+ case IXGBE_DEV_ID_X550EM_A_SFP_N:
+ case IXGBE_DEV_ID_X550EM_A_QSFP:
+ case IXGBE_DEV_ID_X550EM_A_QSFP_N:
+ supported = false;
+ break;
+ default:
+ hw->mac.ops.check_link(hw, &speed, &link_up, false);
+ /* if link is down, assume supported */
+ if (link_up)
+ supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
true : false;
- else
- supported = true;
+ else
+ supported = true;
+ }
+
break;
case ixgbe_media_type_backplane:
supported = true;
@@ -200,9 +211,10 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
break;
}
- ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
- "Device %x does not support flow control autoneg",
- hw->device_id);
+ if (!supported)
+ ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
+ "Device %x does not support flow control autoneg",
+ hw->device_id);
return supported;
}
@@ -397,8 +409,8 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
/* Setup flow control */
ret_val = ixgbe_setup_fc(hw);
- if (ret_val != IXGBE_SUCCESS)
- goto out;
+ if (ret_val != IXGBE_SUCCESS && ret_val != IXGBE_NOT_IMPLEMENTED)
+ return ret_val;
/* Cache bit indicating need for crosstalk fix */
switch (hw->mac.type) {
@@ -419,8 +431,7 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
/* Clear adapter stopped flag */
hw->adapter_stopped = false;
-out:
- return ret_val;
+ return IXGBE_SUCCESS;
}
/**
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c
index 8c2479b..f15449c 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -660,7 +660,7 @@ s32 ixgbe_init_ops_X550EM_a(struct ixgbe_hw *hw)
switch (mac->ops.get_media_type(hw)) {
case ixgbe_media_type_fiber:
- mac->ops.setup_fc = ixgbe_setup_fc_fiber_x550em_a;
+ mac->ops.setup_fc = NULL;
mac->ops.fc_autoneg = ixgbe_fc_autoneg_fiber_x550em_a;
break;
case ixgbe_media_type_backplane:
@@ -4119,80 +4119,14 @@ out:
}
/**
- * ixgbe_fc_autoneg_fiber_x550em_a - Enable flow control IEEE clause 37
+ * ixgbe_fc_autoneg_fiber_x550em_a - passthrough FC settings
* @hw: pointer to hardware structure
*
- * Enable flow control according to IEEE clause 37.
**/
void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *hw)
{
- u32 link_s1, pcs_an_lp, pcs_an;
- s32 status = IXGBE_ERR_FC_NOT_NEGOTIATED;
- ixgbe_link_speed speed;
- bool link_up;
-
- /* AN should have completed when the cable was plugged in.
- * Look for reasons to bail out. Bail out if:
- * - FC autoneg is disabled, or if
- * - link is not up.
- */
- if (hw->fc.disable_fc_autoneg) {
- ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
- "Flow control autoneg is disabled");
- goto out;
- }
-
- hw->mac.ops.check_link(hw, &speed, &link_up, false);
- if (!link_up) {
- ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, "The link is down");
- goto out;
- }
-
- /* Check if auto-negotiation has completed */
- status = hw->mac.ops.read_iosf_sb_reg(hw,
- IXGBE_KRM_LINK_S1(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY, &link_s1);
-
- if (status != IXGBE_SUCCESS ||
- (link_s1 & IXGBE_KRM_LINK_S1_MAC_AN_COMPLETE) == 0) {
- DEBUGOUT("Auto-Negotiation did not complete\n");
- status = IXGBE_ERR_FC_NOT_NEGOTIATED;
- goto out;
- }
-
- /* Determine advertised flow control */
- status = hw->mac.ops.read_iosf_sb_reg(hw,
- IXGBE_KRM_PCS_KX_AN(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY, &pcs_an);
-
- if (status != IXGBE_SUCCESS) {
- DEBUGOUT("Auto-Negotiation did not complete\n");
- goto out;
- }
-
- /* Determine link parter flow control */
- status = hw->mac.ops.read_iosf_sb_reg(hw,
- IXGBE_KRM_PCS_KX_AN_LP(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY, &pcs_an_lp);
-
- if (status != IXGBE_SUCCESS) {
- DEBUGOUT("Auto-Negotiation did not complete\n");
- goto out;
- }
-
- status = ixgbe_negotiate_fc(hw, pcs_an, pcs_an_lp,
- IXGBE_KRM_PCS_KX_AN_SYM_PAUSE,
- IXGBE_KRM_PCS_KX_AN_ASM_PAUSE,
- IXGBE_KRM_PCS_KX_AN_LP_SYM_PAUSE,
- IXGBE_KRM_PCS_KX_AN_LP_ASM_PAUSE);
-
-out:
- if (status == IXGBE_SUCCESS) {
- hw->fc.fc_was_autonegged = true;
- } else {
- hw->fc.fc_was_autonegged = false;
- hw->fc.current_mode = hw->fc.requested_mode;
- }
+ hw->fc.fc_was_autonegged = false;
+ hw->fc.current_mode = hw->fc.requested_mode;
}
/**
@@ -4430,120 +4364,6 @@ s32 ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *hw)
}
/**
- * ixgbe_setup_fc_fiber_x550em_a - Set up flow control
- * @hw: pointer to hardware structure
- *
- * Called at init time to set up flow control.
- **/
-s32 ixgbe_setup_fc_fiber_x550em_a(struct ixgbe_hw *hw)
-{
- struct ixgbe_mac_info *mac = &hw->mac;
- s32 rc = IXGBE_SUCCESS;
- u32 an_cntl4, lctrl, pcs_an;
-
- DEBUGFUNC("ixgbe_setup_fc_fiber_x550em_a");
-
- /* Validate the requested mode */
- if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
- ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED,
- "ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
- return IXGBE_ERR_INVALID_LINK_SETTINGS;
- }
-
- /* Enable clause 37 auto-negotiation in KRM_LINK_CTRL_1 */
- if (hw->fc.requested_mode == ixgbe_fc_default)
- hw->fc.requested_mode = ixgbe_fc_full;
-
- rc = mac->ops.read_iosf_sb_reg(hw,
- IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY, &lctrl);
- if (rc)
- return rc;
-
- lctrl |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE;
- lctrl |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CLAUSE_37_EN;
-
- rc = mac->ops.write_iosf_sb_reg(hw,
- IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY, lctrl);
- if (rc)
- return rc;
-
- /* Enable clause 37 over 73 in KRM_AN_CNTL_4 */
- rc = mac->ops.read_iosf_sb_reg(hw,
- IXGBE_KRM_AN_CNTL_4(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY, &an_cntl4);
- if (rc)
- return rc;
-
- an_cntl4 |= IXGBE_KRM_AN_CNTL_4_ECSR_AN37_OVER_73;
-
- rc = mac->ops.write_iosf_sb_reg(hw,
- IXGBE_KRM_AN_CNTL_4(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY, an_cntl4);
- if (rc)
- return rc;
-
- rc = hw->mac.ops.read_iosf_sb_reg(hw,
- IXGBE_KRM_PCS_KX_AN(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY, &pcs_an);
-
- if (rc)
- return rc;
-
- /* The possible values of fc.requested_mode are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause frames,
- * but not send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames but
- * we do not support receiving pause frames).
- * 3: Both Rx and Tx flow control (symmetric) are enabled.
- * other: Invalid.
- */
- switch (hw->fc.requested_mode) {
- case ixgbe_fc_none:
- /* Flow control completely disabled by software override. */
- pcs_an &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE |
- IXGBE_KRM_AN_CNTL_1_ASM_PAUSE);
- break;
- case ixgbe_fc_tx_pause:
- /* Tx Flow control is enabled, and Rx Flow control is
- * disabled by software override.
- */
- pcs_an |= IXGBE_KRM_PCS_KX_AN_ASM_PAUSE;
- pcs_an &= ~IXGBE_KRM_PCS_KX_AN_SYM_PAUSE;
- break;
- case ixgbe_fc_rx_pause:
- /* Rx Flow control is enabled and Tx Flow control is
- * disabled by software override. Since there really
- * isn't a way to advertise that we are capable of RX
- * Pause ONLY, we will advertise that we support both
- * symmetric and asymmetric Rx PAUSE, as such we fall
- * through to the fc_full statement. Later, we will
- * disable the adapter's ability to send PAUSE frames.
- */
- case ixgbe_fc_full:
- /* Flow control (both Rx and Tx) is enabled by SW override. */
- pcs_an |= IXGBE_KRM_PCS_KX_AN_SYM_PAUSE |
- IXGBE_KRM_PCS_KX_AN_ASM_PAUSE;
- break;
- default:
- ERROR_REPORT1(IXGBE_ERROR_ARGUMENT,
- "Flow control param set incorrectly\n");
- return IXGBE_ERR_CONFIG;
- }
-
- rc = hw->mac.ops.write_iosf_sb_reg(hw,
- IXGBE_KRM_PCS_KX_AN(hw->bus.lan_id),
- IXGBE_SB_IOSF_TARGET_KR_PHY, pcs_an);
-
- /* Restart auto-negotiation. */
- rc = ixgbe_restart_an_internal_phy_x550em(hw);
-
- return rc;
-}
-
-/**
* ixgbe_set_mux - Set mux for port 1 access with CS4227
* @hw: pointer to hardware structure
* @state: set mux if 1, clear if 0
--
1.9.3
next prev parent reply other threads:[~2016-09-25 9:01 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-27 15:47 [dpdk-dev] [PATCH 00/39] net/ixgbe: base code update Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 01/39] net/ixgbe/base: fix delta check for setting VFTA Xiao Wang
2016-09-19 17:00 ` Ferruh Yigit
2016-09-22 15:58 ` Wang, Xiao W
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 00/40] net/ixgbe: base code update Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 01/40] net/ixgbe/base: fix delta check for setting VFTA Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 02/40] net/ixgbe/base: remove X550em SFP iXFI setup Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 03/40] net/ixgbe/base: change endianness of PHY data Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 04/40] net/ixgbe/base: add X550em_a 10G PHY support Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 05/40] net/ixgbe/base: move vf_update_xcast_mode to base code Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 06/40] net/ixgbe/base: introduce new ops init functions Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 07/40] net/ixgbe/base: separate PHY probe code Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 08/40] net/ixgbe/base: fully initialize X550em_a 1G PHYs Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 09/40] net/ixgbe/base: add macros for VF promiscuous mode Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 10/40] net/ixgbe/base: add FC setup for X550em_a fiber Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 11/40] net/ixgbe/base: add FC autoneg " Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 12/40] net/ixgbe/base: clear page register in error path Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 13/40] net/ixgbe/base: configure DMAC for 10Mb operation Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 14/40] net/ixgbe/base: fix function comments about X550 Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 15/40] net/ixgbe/base: report setting LPE register error Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 16/40] net/ixgbe/base: bump mailbox version Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 17/40] net/ixgbe/base: access IOSF by host interface Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 18/40] net/ixgbe/base: fix check on NACK Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 19/40] net/ixgbe/base: define X550 PCIe serial MAC addr Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 20/40] net/ixgbe/base: bypass checking link for crosstalk Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 21/40] net/ixgbe/base: support X550em_a SGMII FC autoneg Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 22/40] net/ixgbe/base: add macros for GENEVE UDP port Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 23/40] net/ixgbe/base: add bound check in LED functions Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 24/40] net/ixgbe/base: use default check link function Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 25/40] net/ixgbe/base: set default autoneg speed at reset Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 26/40] net/ixgbe/base: add missing FDIRSCTPM mask setting Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 27/40] net/ixgbe/base: commonize mailbox write and read Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 28/40] net/ixgbe/base: reduce delay for SWFW semaphore Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 29/40] net/ixgbe/base: report autoneg supported for X550 Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 30/40] net/ixgbe/base: remove X550em_a 100Mbps support Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 31/40] net/ixgbe/base: unify link speed value Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 32/40] net/ixgbe/base: separate ops init from PHY init Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 33/40] net/ixgbe/base: add X550em_a FW ALEF support Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 34/40] net/ixgbe/base: add two MAC ops for Hyper-V Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 35/40] net/ixgbe/base: hold semaphore for shadow RAM access Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 36/40] net/ixgbe/base: update X550em_a backplane speed Xiao Wang
2016-09-25 9:00 ` Xiao Wang [this message]
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 38/40] net/ixgbe/base: do not skip PHY configuration Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 39/40] net/ixgbe/base: clean up Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 40/40] net/ixgbe/base: add base driver update brief Xiao Wang
2016-09-26 2:06 ` [dpdk-dev] [PATCH v2 00/40] net/ixgbe: base code update Lu, Wenzhuo
2016-09-28 15:31 ` Bruce Richardson
2016-08-27 15:47 ` [dpdk-dev] [PATCH 02/39] net/ixgbe/base: remove X550em SFP iXFI setup Xiao Wang
2016-09-19 17:01 ` Ferruh Yigit
2016-08-27 15:47 ` [dpdk-dev] [PATCH 03/39] net/ixgbe/base: change endianness of PHY data Xiao Wang
2016-09-19 17:01 ` Ferruh Yigit
2016-09-25 0:36 ` Wang, Xiao W
2016-08-27 15:47 ` [dpdk-dev] [PATCH 04/39] net/ixgbe/base: add X550em_a 10G PHY support Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 05/39] net/ixgbe/base: support VF multicast promiscuous Xiao Wang
2016-09-19 17:05 ` Ferruh Yigit
2016-09-23 3:35 ` Wang, Xiao W
2016-08-27 15:47 ` [dpdk-dev] [PATCH 06/39] net/ixgbe/base: introduce new ops init functions Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 07/39] net/ixgbe/base: separate PHY probe code Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 08/39] net/ixgbe/base: fully initialize X550em_a 1G PHYs Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 09/39] net/ixgbe/base: add macros for VF promiscuous mode Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 10/39] net/ixgbe/base: add FC setup for X550em_a fiber Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 11/39] net/ixgbe/base: add FC autoneg " Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 12/39] net/ixgbe/base: clear page register in error path Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 13/39] net/ixgbe/base: configure DMAC for 10Mb operation Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 14/39] net/ixgbe/base: fix function comments about X550 Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 15/39] net/ixgbe/base: report setting LPE register error Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 16/39] net/ixgbe/base: bump mailbox version Xiao Wang
2016-09-19 17:03 ` Ferruh Yigit
2016-09-23 3:50 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 17/39] net/ixgbe/base: access IOSF by host interface Xiao Wang
2016-09-19 17:04 ` Ferruh Yigit
2016-09-23 5:16 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 18/39] net/ixgbe/base: fix check on NACK Xiao Wang
2016-09-19 17:07 ` Ferruh Yigit
2016-09-23 6:05 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 19/39] net/ixgbe/base: define X550 PCIe serial MAC addr Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 20/39] net/ixgbe/base: bypass checking link for crosstalk Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 21/39] net/ixgbe/base: support X550em_a SGMII FC autoneg Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 22/39] net/ixgbe/base: add macros for GENEVE UDP port Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 23/39] net/ixgbe/base: add bound check in LED functions Xiao Wang
2016-09-19 17:06 ` Ferruh Yigit
2016-09-22 16:08 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 24/39] net/ixgbe/base: use default check link function Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 25/39] net/ixgbe/base: set default autoneg speed at reset Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 26/39] net/ixgbe/base: add missing FDIRSCTPM mask setting Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 27/39] net/ixgbe/base: commonize mailbox write and read Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 28/39] net/ixgbe/base: reduce delay for SWFW semaphore Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 29/39] net/ixgbe/base: report autoneg supported for X550 Xiao Wang
2016-09-19 17:07 ` Ferruh Yigit
2016-09-23 0:59 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 30/39] net/ixgbe/base: remove X550em_a 100Mbps support Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 31/39] net/ixgbe/base: unify link speed value Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 32/39] net/ixgbe/base: separate ops init from PHY init Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 33/39] net/ixgbe/base: add X550em_a FW ALEF support Xiao Wang
2016-09-19 17:07 ` Ferruh Yigit
2016-09-22 2:56 ` Lu, Wenzhuo
2016-09-23 6:47 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 34/39] net/ixgbe/base: add two MAC ops for Hyper-V Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 35/39] net/ixgbe/base: hold semaphore for shadow RAM access Xiao Wang
2016-09-19 17:08 ` Ferruh Yigit
2016-09-23 8:06 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 36/39] net/ixgbe/base: update X550em_a backplane speed Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 37/39] net/ixgbe/base: clean code of flow control autoneg Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 38/39] net/ixgbe/base: do not skip PHY configuration Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 39/39] net/ixgbe/base: add base driver update brief Xiao Wang
2016-09-19 17:08 ` Ferruh Yigit
2016-09-22 2:55 ` Lu, Wenzhuo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474794017-5896-38-git-send-email-xiao.w.wang@intel.com \
--to=xiao.w.wang@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).