From: Andrew Rybchenko <arybchenko@solarflare.com>
To: <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH 47/56] net/sfc: calculate Rx buffer size which may be used
Date: Mon, 21 Nov 2016 15:01:01 +0000 [thread overview]
Message-ID: <1479740470-6723-48-git-send-email-arybchenko@solarflare.com> (raw)
In-Reply-To: <1479740470-6723-1-git-send-email-arybchenko@solarflare.com>
Take Rx buffer start alignment and end-padding into account.
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
---
drivers/net/sfc/efx/sfc_rx.c | 110 +++++++++++++++++++++++++++++++++++++++++--
drivers/net/sfc/efx/sfc_rx.h | 1 +
2 files changed, 107 insertions(+), 4 deletions(-)
diff --git a/drivers/net/sfc/efx/sfc_rx.c b/drivers/net/sfc/efx/sfc_rx.c
index d4a1a02..bfe92bf 100644
--- a/drivers/net/sfc/efx/sfc_rx.c
+++ b/drivers/net/sfc/efx/sfc_rx.c
@@ -66,6 +66,106 @@ sfc_rx_qcheck_conf(struct sfc_adapter *sa,
return rc;
}
+static unsigned int
+sfc_rx_mbuf_data_alignment(struct rte_mempool *mb_pool)
+{
+ int data_off;
+ int order;
+
+ /* The mbuf object itself is always cache line aligned */
+ order = rte_bsf32(RTE_CACHE_LINE_SIZE);
+
+ /* Data offset from mbuf object start */
+ data_off = sizeof(struct rte_mbuf) + rte_pktmbuf_priv_size(mb_pool) +
+ RTE_PKTMBUF_HEADROOM;
+
+ order = MIN(order, rte_bsf32(data_off));
+
+ return 1u << (order - 1);
+}
+
+static uint16_t
+sfc_rx_mb_pool_buf_size(struct sfc_adapter *sa, struct rte_mempool *mb_pool)
+{
+ const efx_nic_cfg_t *encp = efx_nic_cfg_get(sa->nic);
+ const uint32_t nic_align_start = MAX(1, encp->enc_rx_buf_align_start);
+ const uint32_t nic_align_end = MAX(1, encp->enc_rx_buf_align_end);
+ uint16_t buf_size;
+ unsigned int buf_aligned;
+ unsigned int start_alignment;
+ unsigned int end_padding_alignment;
+
+ /* Below it is assumed that both alignments are power of 2 */
+ SFC_ASSERT(rte_is_power_of_2(nic_align_start));
+ SFC_ASSERT(rte_is_power_of_2(nic_align_end));
+
+ /*
+ * mbuf is always cache line aligned, double-check
+ * that it meets rx buffer start alignment requirements.
+ */
+
+ /* Start from mbuf pool data room size */
+ buf_size = rte_pktmbuf_data_room_size(mb_pool);
+
+ /* Remove headroom */
+ if (buf_size <= RTE_PKTMBUF_HEADROOM) {
+ sfc_err(sa,
+ "RxQ mbuf pool %s object data room size %u is smaller than headroom %u",
+ mb_pool->name, buf_size, RTE_PKTMBUF_HEADROOM);
+ return 0;
+ }
+ buf_size -= RTE_PKTMBUF_HEADROOM;
+
+ /* Calculate guaranteed data start alignment */
+ buf_aligned = sfc_rx_mbuf_data_alignment(mb_pool);
+
+ /* Reserve space for start alignment */
+ if (buf_aligned < nic_align_start) {
+ start_alignment = nic_align_start - buf_aligned;
+ if (buf_size <= start_alignment) {
+ sfc_err(sa,
+ "RxQ mbuf pool %s object data room size %u is insufficient for headroom %u and buffer start alignment %u required by NIC",
+ mb_pool->name,
+ rte_pktmbuf_data_room_size(mb_pool),
+ RTE_PKTMBUF_HEADROOM, start_alignment);
+ return 0;
+ }
+ buf_aligned = nic_align_start;
+ buf_size -= start_alignment;
+ } else {
+ start_alignment = 0;
+ }
+
+ /* Make sure that end padding does not write beyond the buffer */
+ if (buf_aligned < nic_align_end) {
+ /*
+ * Estimate space which can be lost. If guarnteed buffer
+ * size is odd, lost space is (nic_align_end - 1). More
+ * accurate formula is below.
+ */
+ end_padding_alignment = nic_align_end -
+ MIN(buf_aligned, 1 << (rte_bsf32(buf_size) - 1));
+ if (buf_size <= end_padding_alignment) {
+ sfc_err(sa,
+ "RxQ mbuf pool %s object data room size %u is insufficient for headroom %u, buffer start alignment %u and end padding alignment %u required by NIC",
+ mb_pool->name,
+ rte_pktmbuf_data_room_size(mb_pool),
+ RTE_PKTMBUF_HEADROOM, start_alignment,
+ end_padding_alignment);
+ return 0;
+ }
+ buf_size -= end_padding_alignment;
+ } else {
+ /*
+ * Start is aligned the same or better than end,
+ * just align length.
+ */
+ buf_size = P2ALIGN(buf_size, nic_align_end);
+ }
+
+ return buf_size;
+}
+
int
sfc_rx_qinit(struct sfc_adapter *sa, unsigned int sw_index,
uint16_t nb_rx_desc, unsigned int socket_id,
@@ -73,6 +173,7 @@ sfc_rx_qinit(struct sfc_adapter *sa, unsigned int sw_index,
struct rte_mempool *mb_pool)
{
int rc;
+ uint16_t buf_size;
struct sfc_rxq_info *rxq_info;
unsigned int evq_index;
struct sfc_evq *evq;
@@ -82,10 +183,10 @@ sfc_rx_qinit(struct sfc_adapter *sa, unsigned int sw_index,
if (rc != 0)
goto fail_bad_conf;
- if (rte_pktmbuf_data_room_size(mb_pool) <= RTE_PKTMBUF_HEADROOM) {
- sfc_err(sa, "RxQ %u mbuf is too small, %u vs headroom %u",
- sw_index, rte_pktmbuf_data_room_size(mb_pool),
- RTE_PKTMBUF_HEADROOM);
+ buf_size = sfc_rx_mb_pool_buf_size(sa, mb_pool);
+ if (buf_size == 0) {
+ sfc_err(sa, "RxQ %u mbuf pool object size is too small",
+ sw_index);
goto fail_bad_conf;
}
@@ -126,6 +227,7 @@ sfc_rx_qinit(struct sfc_adapter *sa, unsigned int sw_index,
rxq->evq = evq;
rxq->ptr_mask = rxq_info->entries - 1;
rxq->refill_mb_pool = mb_pool;
+ rxq->buf_size = buf_size;
rxq->hw_index = sw_index;
rxq->state = SFC_RXQ_INITIALIZED;
diff --git a/drivers/net/sfc/efx/sfc_rx.h b/drivers/net/sfc/efx/sfc_rx.h
index 503c3df..3e24434 100644
--- a/drivers/net/sfc/efx/sfc_rx.h
+++ b/drivers/net/sfc/efx/sfc_rx.h
@@ -71,6 +71,7 @@ struct sfc_rxq {
unsigned int ptr_mask;
/* Used on refill */
+ uint16_t buf_size;
struct rte_mempool *refill_mb_pool;
efx_rxq_t *common;
efsys_mem_t mem;
--
2.5.5
next prev parent reply other threads:[~2016-11-21 15:01 UTC|newest]
Thread overview: 149+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-21 15:00 [dpdk-dev] [PATCH 00/56] Solarflare libefx-based PMD Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 01/56] net/sfc: libefx-based PMD stub sufficient to build and init Andrew Rybchenko
2016-11-23 15:26 ` Ferruh Yigit
2016-11-24 15:59 ` Andrew Rybchenko
2016-11-25 10:17 ` Ferruh Yigit
2016-11-25 14:22 ` Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 02/56] net/sfc: import libefx base Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 03/56] net/sfc: import libefx register definitions Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 04/56] net/sfc: import libefx filters support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 05/56] net/sfc: import libefx MCDI definition Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 06/56] net/sfc: import libefx MCDI implementation Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 07/56] net/sfc: import libefx MCDI logging support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 08/56] net/sfc: import libefx MCDI proxy authorization support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 09/56] net/sfc: import libefx 5xxx/6xxx family support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 10/56] net/sfc: import libefx SFN7xxx " Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 11/56] net/sfc: import libefx SFN8xxx " Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 12/56] net/sfc: import libefx diagnostics support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 13/56] net/sfc: import libefx built-in selftest support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 14/56] net/sfc: import libefx software per-queue statistics support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 15/56] net/sfc: import libefx PHY flags control support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 16/56] net/sfc: import libefx PHY statistics support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 17/56] net/sfc: import libefx PHY LEDs control support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 18/56] net/sfc: import libefx MAC statistics support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 19/56] net/sfc: import libefx event prefetch support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 20/56] net/sfc: import libefx Rx scatter support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 21/56] net/sfc: import libefx RSS support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 22/56] net/sfc: import libefx loopback control support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 23/56] net/sfc: import libefx monitors statistics support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 24/56] net/sfc: import libefx support to access monitors via MCDI Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 25/56] net/sfc: import libefx support for Rx packed stream mode Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 26/56] net/sfc: import libefx NVRAM support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 27/56] net/sfc: import libefx VPD support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 28/56] net/sfc: import libefx bootrom configuration support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 29/56] net/sfc: import libefx licensing support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 30/56] net/sfc: include libefx in build Andrew Rybchenko
2016-11-23 15:26 ` Ferruh Yigit
2016-11-24 15:44 ` Andrew Rybchenko
2016-11-25 10:24 ` Ferruh Yigit
2016-11-25 15:05 ` Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 31/56] net/sfc: implement dummy callback to get device information Andrew Rybchenko
2016-11-23 15:26 ` Ferruh Yigit
2016-11-24 15:05 ` Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 32/56] net/sfc: implement driver operation to init device on attach Andrew Rybchenko
2016-11-23 15:26 ` Ferruh Yigit
2016-11-24 14:58 ` Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 33/56] net/sfc: add device configure and close stubs Andrew Rybchenko
2016-11-23 15:26 ` Ferruh Yigit
2016-11-24 14:46 ` Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 34/56] net/sfc: add device configuration checks Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 35/56] net/sfc: implement device start and stop operations Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 36/56] net/sfc: make available resources estimation and allocation Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 37/56] net/sfc: interrupts support sufficient for event queue init Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 38/56] net/sfc: implement event queue support Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 39/56] net/sfc: implement EVQ dummy exception handling Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 40/56] net/sfc: maintain management event queue Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 41/56] net/sfc: periodic management EVQ polling using alarm Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 42/56] net/sfc: minimum port control sufficient to receive traffic Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 43/56] net/sfc: implement device operation to retrieve link info Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 44/56] net/sfc: implement Rx subsystem stubs Andrew Rybchenko
2016-11-21 15:00 ` [dpdk-dev] [PATCH 45/56] net/sfc: check configured rxmode Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 46/56] net/sfc: implement Rx queue setup release operations Andrew Rybchenko
2016-11-21 15:01 ` Andrew Rybchenko [this message]
2016-11-21 15:01 ` [dpdk-dev] [PATCH 48/56] net/sfc: validate Rx queue buffers setup Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 49/56] net/sfc: implement Rx queue start and stop operations Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 50/56] net/sfc: implement device callback to Rx burst of packets Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 51/56] net/sfc: discard scattered packet on Rx correctly Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 52/56] net/sfc: provide basic stubs for Tx subsystem Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 53/56] net/sfc: add function to check configured Tx mode Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 54/56] net/sfc: add callbacks to set up and release Tx queues Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 55/56] net/sfc: implement transmit path start / stop Andrew Rybchenko
2016-11-21 15:01 ` [dpdk-dev] [PATCH 56/56] net/sfc: add callback to send bursts of packets Andrew Rybchenko
2016-11-23 0:02 ` [dpdk-dev] [PATCH 00/56] Solarflare libefx-based PMD Ferruh Yigit
2016-11-23 0:10 ` Ferruh Yigit
2016-11-23 7:49 ` Andrew Rybchenko
2016-11-23 9:57 ` Mcnamara, John
2016-11-23 13:34 ` Thomas Monjalon
2016-11-23 19:21 ` Stephen Hemminger
2016-11-24 10:59 ` Andrew Rybchenko
2016-11-25 10:24 ` Ferruh Yigit
2016-11-25 12:02 ` Andrew Rybchenko
2016-11-25 12:43 ` Ferruh Yigit
2016-11-25 13:00 ` Thomas Monjalon
2016-11-25 13:23 ` Andrew Rybchenko
2016-11-25 12:44 ` Andrew Rybchenko
2016-11-23 15:29 ` Ferruh Yigit
2016-11-24 16:15 ` Andrew Rybchenko
2016-11-25 10:25 ` Ferruh Yigit
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 00/55] " Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 01/55] net/sfc: libefx-based PMD stub sufficient to build and init Andrew Rybchenko
2016-12-02 14:54 ` Ferruh Yigit
2016-12-02 15:03 ` Andrew Rybchenko
2016-12-02 15:08 ` Ferruh Yigit
2016-12-02 15:11 ` Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 02/55] net/sfc: import libefx base Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 03/55] net/sfc: import libefx register definitions Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 04/55] net/sfc: import libefx filters support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 05/55] net/sfc: import libefx MCDI definition Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 06/55] net/sfc: import libefx MCDI implementation Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 07/55] net/sfc: import libefx MCDI logging support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 08/55] net/sfc: import libefx MCDI proxy authorization support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 09/55] net/sfc: import libefx 5xxx/6xxx family support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 10/55] net/sfc: import libefx SFN7xxx " Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 11/55] net/sfc: import libefx SFN8xxx " Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 12/55] net/sfc: import libefx diagnostics support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 13/55] net/sfc: import libefx built-in selftest support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 14/55] net/sfc: import libefx software per-queue statistics support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 15/55] net/sfc: import libefx PHY flags control support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 16/55] net/sfc: import libefx PHY statistics support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 17/55] net/sfc: import libefx PHY LEDs control support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 18/55] net/sfc: import libefx MAC statistics support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 19/55] net/sfc: import libefx event prefetch support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 20/55] net/sfc: import libefx Rx scatter support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 21/55] net/sfc: import libefx RSS support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 22/55] net/sfc: import libefx loopback control support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 23/55] net/sfc: import libefx monitors statistics support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 24/55] net/sfc: import libefx support to access monitors via MCDI Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 25/55] net/sfc: import libefx support for Rx packed stream mode Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 26/55] net/sfc: import libefx NVRAM support Andrew Rybchenko
2016-11-29 16:18 ` [dpdk-dev] [PATCH v2 27/55] net/sfc: import libefx VPD support Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 28/55] net/sfc: import libefx bootrom configuration support Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 29/55] net/sfc: import libefx licensing support Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 30/55] net/sfc: include libefx in build Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 31/55] net/sfc: implement driver operation to init device on attach Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 32/55] net/sfc: add device configure and close stubs Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 33/55] net/sfc: add device configuration checks Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 34/55] net/sfc: implement device start and stop operations Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 35/55] net/sfc: make available resources estimation and allocation Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 36/55] net/sfc: interrupts support sufficient for event queue init Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 37/55] net/sfc: implement event queue support Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 38/55] net/sfc: implement EVQ dummy exception handling Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 39/55] net/sfc: maintain management event queue Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 40/55] net/sfc: periodic management EVQ polling using alarm Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 41/55] net/sfc: minimum port control sufficient to receive traffic Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 42/55] net/sfc: implement device operation to retrieve link info Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 43/55] net/sfc: implement Rx subsystem stubs Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 44/55] net/sfc: check configured rxmode Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 45/55] net/sfc: implement Rx queue setup release operations Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 46/55] net/sfc: calculate Rx buffer size which may be used Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 47/55] net/sfc: validate Rx queue buffers setup Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 48/55] net/sfc: implement Rx queue start and stop operations Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 49/55] net/sfc: implement device callback to Rx burst of packets Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 50/55] net/sfc: discard scattered packet on Rx correctly Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 51/55] net/sfc: provide basic stubs for Tx subsystem Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 52/55] net/sfc: add function to check configured Tx mode Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 53/55] net/sfc: add callbacks to set up and release Tx queues Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 54/55] net/sfc: implement transmit path start / stop Andrew Rybchenko
2016-11-29 16:19 ` [dpdk-dev] [PATCH v2 55/55] net/sfc: add callback to send bursts of packets Andrew Rybchenko
2016-12-02 14:55 ` [dpdk-dev] [PATCH v2 00/55] Solarflare libefx-based PMD Ferruh Yigit
2016-12-05 13:38 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1479740470-6723-48-git-send-email-arybchenko@solarflare.com \
--to=arybchenko@solarflare.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).