DPDK patches and discussions
 help / color / mirror / Atom feed
From: Ben Walker <benjamin.walker@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] Improved PCI hotplug support
Date: Wed, 23 Nov 2016 12:36:37 -0700	[thread overview]
Message-ID: <1479929804-19614-1-git-send-email-benjamin.walker@intel.com> (raw)

This series of patches adds support for PCI hot insert and remove.
Detection of new devices or removed devices is accomplished by
polling rte_eal_pci_probe, with the registered PCI drivers being
loaded or unloaded when a new device is found or previously known
device is removed.

There are some additional considerations for hotplug that this
patch does not address. Full hotplug support actually consists of
three operations:

1) Hot insert. This patch series does correctly handle this case.
2) Planned hot remove. This patch series can also handle this case
        because the user can explicitly unload the driver prior to
        removal.
3) Surprise hot remove. If a driver is loaded and active, a SIGBUS
        may occur on the next access to a memory mapped region.
        This is currently NOT handled by this patch series.

             reply	other threads:[~2016-11-23 19:36 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-23 19:36 Ben Walker [this message]
2016-11-23 19:36 ` [dpdk-dev] [PATCH 1/7] pci: If a driver's probe function fails, unmap resources Ben Walker
2016-11-23 19:36 ` [dpdk-dev] [PATCH 2/7] pci: Separate detaching ethernet ports from PCI devices Ben Walker
2016-11-23 19:36 ` [dpdk-dev] [PATCH 3/7] pci: Pass rte_pci_addr to functions instead of separate args Ben Walker
2016-11-23 19:36 ` [dpdk-dev] [PATCH 4/7] pci: rte_eal_pci_scan now handles removal of PCI devices Ben Walker
2016-11-23 19:36 ` [dpdk-dev] [PATCH 5/7] pci: Move driver registration above pci scan Ben Walker
2016-11-23 19:36 ` [dpdk-dev] [PATCH 6/7] pci: Combine rte_eal_pci_scan and rte_eal_pci_probe Ben Walker
2016-11-23 19:36 ` [dpdk-dev] [PATCH 7/7] pci: Clarify interfaces for dynamic attach/detach of drivers Ben Walker
2016-11-23 20:07 ` [dpdk-dev] [PATCH v2 1/7] pci: If a driver's probe function fails, unmap resources Ben Walker
2016-11-23 20:07   ` [dpdk-dev] [PATCH v2 2/7] pci: Separate detaching ethernet ports from PCI devices Ben Walker
2016-11-25  9:25     ` Shreyansh Jain
2016-11-23 20:07   ` [dpdk-dev] [PATCH v2 3/7] pci: Pass rte_pci_addr to functions instead of separate args Ben Walker
2016-11-25 10:33     ` Shreyansh Jain
2016-12-01  6:26     ` Shreyansh Jain
2016-12-02 16:16       ` Walker, Benjamin
2016-11-23 20:07   ` [dpdk-dev] [PATCH v2 4/7] pci: rte_eal_pci_scan now handles removal of PCI devices Ben Walker
2016-11-25 10:44     ` Shreyansh Jain
2017-02-09 16:59     ` [dpdk-dev] [PATCH v3 1/3] " Ben Walker
2017-02-09 16:59       ` [dpdk-dev] [PATCH v3 2/3] pci: Move driver registration above pci scan Ben Walker
2017-02-09 16:59       ` [dpdk-dev] [PATCH v3 3/3] pci: Clarify interfaces for dynamic attach/detach of drivers Ben Walker
2019-01-23 16:19       ` [dpdk-dev] [PATCH v3 1/3] pci: rte_eal_pci_scan now handles removal of PCI devices Ferruh Yigit
2016-11-23 20:07   ` [dpdk-dev] [PATCH v2 5/7] pci: Move driver registration above pci scan Ben Walker
2016-11-23 20:07   ` [dpdk-dev] [PATCH v2 6/7] pci: Combine rte_eal_pci_scan and rte_eal_pci_probe Ben Walker
2016-11-25 10:56     ` Shreyansh Jain
2016-11-23 20:07   ` [dpdk-dev] [PATCH v2 7/7] pci: Clarify interfaces for dynamic attach/detach of drivers Ben Walker
2016-12-03  6:55     ` Shreyansh Jain
2016-11-25  9:21   ` [dpdk-dev] [PATCH v2 1/7] pci: If a driver's probe function fails, unmap resources Shreyansh Jain
2016-12-21 16:19     ` Thomas Monjalon
2017-01-04 17:39       ` Thomas Monjalon
2017-01-09 17:12         ` Thomas Monjalon
2017-01-11 17:10   ` [dpdk-dev] [PATCH v3 1/3] " Ben Walker
2017-01-11 17:10     ` [dpdk-dev] [PATCH v3 2/3] pci: Separate detaching ethernet ports from PCI devices Ben Walker
2017-01-11 17:10     ` [dpdk-dev] [PATCH v3 3/3] pci: Pass rte_pci_addr to functions instead of separate args Ben Walker
2017-01-12 14:58       ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1479929804-19614-1-git-send-email-benjamin.walker@intel.com \
    --to=benjamin.walker@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).