From: Jan Blunck <jblunck@infradead.org>
To: dev@dpdk.org
Cc: shreyansh.jain@nxp.com, david.marchand@6wind.com,
stephen@networkplumber.org
Subject: [dpdk-dev] [PATCH v4 13/23] fm10k: localize mapping from eth_dev to pci
Date: Wed, 21 Dec 2016 16:09:36 +0100 [thread overview]
Message-ID: <1482332986-7599-14-git-send-email-jblunck@infradead.org> (raw)
In-Reply-To: <1482332986-7599-1-git-send-email-jblunck@infradead.org>
This simplifies later changes to ethdev.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
---
drivers/net/fm10k/fm10k_ethdev.c | 77 ++++++++++++++++++++++------------------
1 file changed, 43 insertions(+), 34 deletions(-)
diff --git a/drivers/net/fm10k/fm10k_ethdev.c b/drivers/net/fm10k/fm10k_ethdev.c
index 923690c..2f6c628 100644
--- a/drivers/net/fm10k/fm10k_ethdev.c
+++ b/drivers/net/fm10k/fm10k_ethdev.c
@@ -59,7 +59,7 @@
#define BIT_MASK_PER_UINT32 ((1 << CHARS_PER_UINT32) - 1)
/* default 1:1 map from queue ID to interrupt vector ID */
-#define Q2V(dev, queue_id) (dev->pci_dev->intr_handle.intr_vec[queue_id])
+#define Q2V(pci_dev, queue_id) ((pci_dev)->intr_handle.intr_vec[queue_id])
/* First 64 Logical ports for PF/VMDQ, second 64 for Flow director */
#define MAX_LPORT_NUM 128
@@ -711,7 +711,8 @@ fm10k_dev_rx_init(struct rte_eth_dev *dev)
{
struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct fm10k_macvlan_filter_info *macvlan;
- struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
+ struct rte_pci_device *pdev = dev->pci_dev;
+ struct rte_intr_handle *intr_handle = &pdev->intr_handle;
int i, ret;
struct fm10k_rx_queue *rxq;
uint64_t base_addr;
@@ -725,13 +726,13 @@ fm10k_dev_rx_init(struct rte_eth_dev *dev)
i = 0;
if (rte_intr_dp_is_en(intr_handle)) {
for (; i < dev->data->nb_rx_queues; i++) {
- FM10K_WRITE_REG(hw, FM10K_RXINT(i), Q2V(dev, i));
+ FM10K_WRITE_REG(hw, FM10K_RXINT(i), Q2V(pdev, i));
if (hw->mac.type == fm10k_mac_pf)
- FM10K_WRITE_REG(hw, FM10K_ITR(Q2V(dev, i)),
+ FM10K_WRITE_REG(hw, FM10K_ITR(Q2V(pdev, i)),
FM10K_ITR_AUTOMASK |
FM10K_ITR_MASK_CLEAR);
else
- FM10K_WRITE_REG(hw, FM10K_VFITR(Q2V(dev, i)),
+ FM10K_WRITE_REG(hw, FM10K_VFITR(Q2V(pdev, i)),
FM10K_ITR_AUTOMASK |
FM10K_ITR_MASK_CLEAR);
}
@@ -1171,7 +1172,8 @@ static void
fm10k_dev_stop(struct rte_eth_dev *dev)
{
struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
+ struct rte_pci_device *pdev = dev->pci_dev;
+ struct rte_intr_handle *intr_handle = &pdev->intr_handle;
int i;
PMD_INIT_FUNC_TRACE();
@@ -1190,10 +1192,10 @@ fm10k_dev_stop(struct rte_eth_dev *dev)
FM10K_WRITE_REG(hw, FM10K_RXINT(i),
3 << FM10K_RXINT_TIMER_SHIFT);
if (hw->mac.type == fm10k_mac_pf)
- FM10K_WRITE_REG(hw, FM10K_ITR(Q2V(dev, i)),
+ FM10K_WRITE_REG(hw, FM10K_ITR(Q2V(pdev, i)),
FM10K_ITR_MASK_SET);
else
- FM10K_WRITE_REG(hw, FM10K_VFITR(Q2V(dev, i)),
+ FM10K_WRITE_REG(hw, FM10K_VFITR(Q2V(pdev, i)),
FM10K_ITR_MASK_SET);
}
}
@@ -1387,6 +1389,7 @@ fm10k_dev_infos_get(struct rte_eth_dev *dev,
struct rte_eth_dev_info *dev_info)
{
struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct rte_pci_device *pdev = dev->pci_dev;
PMD_INIT_FUNC_TRACE();
@@ -1396,7 +1399,7 @@ fm10k_dev_infos_get(struct rte_eth_dev *dev,
dev_info->max_tx_queues = hw->mac.max_queues;
dev_info->max_mac_addrs = FM10K_MAX_MACADDR_NUM;
dev_info->max_hash_mac_addrs = 0;
- dev_info->max_vfs = dev->pci_dev->max_vfs;
+ dev_info->max_vfs = pdev->max_vfs;
dev_info->vmdq_pool_base = 0;
dev_info->vmdq_queue_base = 0;
dev_info->max_vmdq_pools = ETH_32_POOLS;
@@ -2333,15 +2336,16 @@ static int
fm10k_dev_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t queue_id)
{
struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct rte_pci_device *pdev = dev->pci_dev;
/* Enable ITR */
if (hw->mac.type == fm10k_mac_pf)
- FM10K_WRITE_REG(hw, FM10K_ITR(Q2V(dev, queue_id)),
+ FM10K_WRITE_REG(hw, FM10K_ITR(Q2V(pdev, queue_id)),
FM10K_ITR_AUTOMASK | FM10K_ITR_MASK_CLEAR);
else
- FM10K_WRITE_REG(hw, FM10K_VFITR(Q2V(dev, queue_id)),
+ FM10K_WRITE_REG(hw, FM10K_VFITR(Q2V(pdev, queue_id)),
FM10K_ITR_AUTOMASK | FM10K_ITR_MASK_CLEAR);
- rte_intr_enable(&dev->pci_dev->intr_handle);
+ rte_intr_enable(&pdev->intr_handle);
return 0;
}
@@ -2349,13 +2353,14 @@ static int
fm10k_dev_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id)
{
struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct rte_pci_device *pdev = dev->pci_dev;
/* Disable ITR */
if (hw->mac.type == fm10k_mac_pf)
- FM10K_WRITE_REG(hw, FM10K_ITR(Q2V(dev, queue_id)),
+ FM10K_WRITE_REG(hw, FM10K_ITR(Q2V(pdev, queue_id)),
FM10K_ITR_MASK_SET);
else
- FM10K_WRITE_REG(hw, FM10K_VFITR(Q2V(dev, queue_id)),
+ FM10K_WRITE_REG(hw, FM10K_VFITR(Q2V(pdev, queue_id)),
FM10K_ITR_MASK_SET);
return 0;
}
@@ -2364,7 +2369,8 @@ static int
fm10k_dev_rxq_interrupt_setup(struct rte_eth_dev *dev)
{
struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- struct rte_intr_handle *intr_handle = &dev->pci_dev->intr_handle;
+ struct rte_pci_device *pdev = dev->pci_dev;
+ struct rte_intr_handle *intr_handle = &pdev->intr_handle;
uint32_t intr_vector, vec;
uint16_t queue_id;
int result = 0;
@@ -2380,7 +2386,7 @@ fm10k_dev_rxq_interrupt_setup(struct rte_eth_dev *dev)
intr_vector = dev->data->nb_rx_queues;
/* disable interrupt first */
- rte_intr_disable(&dev->pci_dev->intr_handle);
+ rte_intr_disable(intr_handle);
if (hw->mac.type == fm10k_mac_pf)
fm10k_dev_disable_intr_pf(dev);
else
@@ -2415,7 +2421,7 @@ fm10k_dev_rxq_interrupt_setup(struct rte_eth_dev *dev)
fm10k_dev_enable_intr_pf(dev);
else
fm10k_dev_enable_intr_vf(dev);
- rte_intr_enable(&dev->pci_dev->intr_handle);
+ rte_intr_enable(intr_handle);
hw->mac.ops.update_int_moderator(hw);
return result;
}
@@ -2530,7 +2536,7 @@ fm10k_dev_handle_fault(struct fm10k_hw *hw, uint32_t eicr)
*/
static void
fm10k_dev_interrupt_handler_pf(
- __rte_unused struct rte_intr_handle *handle,
+ struct rte_intr_handle *handle,
void *param)
{
struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
@@ -2581,7 +2587,7 @@ fm10k_dev_interrupt_handler_pf(
FM10K_WRITE_REG(hw, FM10K_ITR(0), FM10K_ITR_AUTOMASK |
FM10K_ITR_MASK_CLEAR);
/* Re-enable interrupt from host side */
- rte_intr_enable(&(dev->pci_dev->intr_handle));
+ rte_intr_enable(handle);
}
/**
@@ -2597,7 +2603,7 @@ fm10k_dev_interrupt_handler_pf(
*/
static void
fm10k_dev_interrupt_handler_vf(
- __rte_unused struct rte_intr_handle *handle,
+ struct rte_intr_handle *handle,
void *param)
{
struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
@@ -2615,7 +2621,7 @@ fm10k_dev_interrupt_handler_vf(
FM10K_WRITE_REG(hw, FM10K_VFITR(0), FM10K_ITR_AUTOMASK |
FM10K_ITR_MASK_CLEAR);
/* Re-enable interrupt from host side */
- rte_intr_enable(&(dev->pci_dev->intr_handle));
+ rte_intr_enable(handle);
}
/* Mailbox message handler in VF */
@@ -2827,6 +2833,8 @@ static int
eth_fm10k_dev_init(struct rte_eth_dev *dev)
{
struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct rte_pci_device *pdev = dev->pci_dev;
+ struct rte_intr_handle *intr_handle = &pdev->intr_handle;
int diag, i;
struct fm10k_macvlan_filter_info *macvlan;
@@ -2840,18 +2848,18 @@ eth_fm10k_dev_init(struct rte_eth_dev *dev)
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
- rte_eth_copy_pci_info(dev, dev->pci_dev);
+ rte_eth_copy_pci_info(dev, pdev);
macvlan = FM10K_DEV_PRIVATE_TO_MACVLAN(dev->data->dev_private);
memset(macvlan, 0, sizeof(*macvlan));
/* Vendor and Device ID need to be set before init of shared code */
memset(hw, 0, sizeof(*hw));
- hw->device_id = dev->pci_dev->id.device_id;
- hw->vendor_id = dev->pci_dev->id.vendor_id;
- hw->subsystem_device_id = dev->pci_dev->id.subsystem_device_id;
- hw->subsystem_vendor_id = dev->pci_dev->id.subsystem_vendor_id;
+ hw->device_id = pdev->id.device_id;
+ hw->vendor_id = pdev->id.vendor_id;
+ hw->subsystem_device_id = pdev->id.subsystem_device_id;
+ hw->subsystem_vendor_id = pdev->id.subsystem_vendor_id;
hw->revision_id = 0;
- hw->hw_addr = (void *)dev->pci_dev->mem_resource[0].addr;
+ hw->hw_addr = (void *)pdev->mem_resource[0].addr;
if (hw->hw_addr == NULL) {
PMD_INIT_LOG(ERR, "Bad mem resource."
" Try to blacklist unused devices.");
@@ -2921,20 +2929,20 @@ eth_fm10k_dev_init(struct rte_eth_dev *dev)
/*PF/VF has different interrupt handling mechanism */
if (hw->mac.type == fm10k_mac_pf) {
/* register callback func to eal lib */
- rte_intr_callback_register(&(dev->pci_dev->intr_handle),
+ rte_intr_callback_register(intr_handle,
fm10k_dev_interrupt_handler_pf, (void *)dev);
/* enable MISC interrupt */
fm10k_dev_enable_intr_pf(dev);
} else { /* VF */
- rte_intr_callback_register(&(dev->pci_dev->intr_handle),
+ rte_intr_callback_register(intr_handle,
fm10k_dev_interrupt_handler_vf, (void *)dev);
fm10k_dev_enable_intr_vf(dev);
}
/* Enable intr after callback registered */
- rte_intr_enable(&(dev->pci_dev->intr_handle));
+ rte_intr_enable(intr_handle);
hw->mac.ops.update_int_moderator(hw);
@@ -3004,7 +3012,8 @@ static int
eth_fm10k_dev_uninit(struct rte_eth_dev *dev)
{
struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-
+ struct rte_pci_device *pdev = dev->pci_dev;
+ struct rte_intr_handle *intr_handle = &pdev->intr_handle;
PMD_INIT_FUNC_TRACE();
/* only uninitialize in the primary process */
@@ -3019,7 +3028,7 @@ eth_fm10k_dev_uninit(struct rte_eth_dev *dev)
dev->tx_pkt_burst = NULL;
/* disable uio/vfio intr */
- rte_intr_disable(&(dev->pci_dev->intr_handle));
+ rte_intr_disable(intr_handle);
/*PF/VF has different interrupt handling mechanism */
if (hw->mac.type == fm10k_mac_pf) {
@@ -3027,13 +3036,13 @@ eth_fm10k_dev_uninit(struct rte_eth_dev *dev)
fm10k_dev_disable_intr_pf(dev);
/* unregister callback func to eal lib */
- rte_intr_callback_unregister(&(dev->pci_dev->intr_handle),
+ rte_intr_callback_unregister(intr_handle,
fm10k_dev_interrupt_handler_pf, (void *)dev);
} else {
/* disable interrupt */
fm10k_dev_disable_intr_vf(dev);
- rte_intr_callback_unregister(&(dev->pci_dev->intr_handle),
+ rte_intr_callback_unregister(intr_handle,
fm10k_dev_interrupt_handler_vf, (void *)dev);
}
--
2.7.4
next prev parent reply other threads:[~2016-12-21 15:10 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-21 15:09 [dpdk-dev] [PATCH v4 00/23] Decouple ethdev from PCI device Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 01/23] eal: define container_of macro Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 02/23] eal: Allow passing const rte_intr_handle Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 03/23] rte_device: make driver pointer const Jan Blunck
2016-12-22 7:18 ` Shreyansh Jain
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 04/23] pmd: remove useless reset of dev_info->dev_pci Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 05/23] e1000: localize mapping from eth_dev to pci Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 06/23] ixgbe: localize mapping from eth_dev to pci_device Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 07/23] i40e: localize mapping of eth_dev to pci Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 08/23] broadcom: localize mapping from " Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 09/23] virtio: Don't fill dev_info->driver_name Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 10/23] virtio: Add vtpci_intr_handle() helper to get rte_intr_handle Jan Blunck
2016-12-21 20:08 ` Stephen Hemminger
2016-12-23 11:04 ` Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 11/23] virtio: Don't depend on struct rte_eth_dev's pci_dev Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 12/23] bnx2x: localize mapping from eth_dev to pci Jan Blunck
2016-12-21 16:35 ` Harish Patil
2016-12-21 15:09 ` Jan Blunck [this message]
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 14/23] qede: localize mapping of " Jan Blunck
2016-12-21 16:35 ` Harish Patil
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 15/23] szedata2: localize handling of pci resources Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 16/23] nfp: localize rte_pci_device handling Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 17/23] vmxnet3: use eth_dev->data->drv_name instead of pci_drv name Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 18/23] ethdev: Helper to map to struct rte_pci_device Jan Blunck
2016-12-22 15:21 ` Thomas Monjalon
2016-12-22 18:13 ` Jan Blunck
2016-12-23 8:30 ` Thomas Monjalon
2016-12-23 10:27 ` Jan Blunck
2016-12-23 12:47 ` Thomas Monjalon
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 19/23] drivers: Replace per-PMD macros with rte_eth_dev_to_pci() helper Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 20/23] drivers: Use " Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 21/23] ethdev: Move filling of rte_eth_dev_info->pci_dev to dev_infos_get() Jan Blunck
2016-12-21 20:09 ` Stephen Hemminger
2016-12-22 8:11 ` Shreyansh Jain
2016-12-23 10:50 ` Jan Blunck
2016-12-23 11:11 ` Shreyansh Jain
[not found] ` <CALe+Z005ByAFq03su4VO_=sH299zS_zAQWjyfyW8jQ3sD7zPrw@mail.gmail.com>
2016-12-23 11:39 ` Shreyansh Jain
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 22/23] ethdev: Decouple interrupt handling from PCI device Jan Blunck
2016-12-22 15:13 ` Thomas Monjalon
2016-12-22 18:26 ` Jan Blunck
2016-12-21 15:09 ` [dpdk-dev] [PATCH v4 23/23] ethdev: Decouple struct rte_eth_dev from struct rte_pci_device Jan Blunck
2016-12-22 15:22 ` Thomas Monjalon
2016-12-22 15:26 ` [dpdk-dev] [PATCH v4 00/23] Decouple ethdev from PCI device Thomas Monjalon
2016-12-23 14:28 ` Thomas Monjalon
2016-12-23 15:57 ` [dpdk-dev] [PATCH v5 00/20] " Jan Blunck
2016-12-25 22:33 ` Thomas Monjalon
2017-01-03 12:20 ` Ferruh Yigit
2017-01-06 10:07 ` Andrew Rybchenko
2017-01-03 12:24 ` Ferruh Yigit
2017-01-03 14:06 ` Thomas Monjalon
2017-01-03 14:40 ` Ferruh Yigit
2016-12-23 15:57 ` [dpdk-dev] [PATCH v5 01/20] eal: define container_of macro Jan Blunck
2016-12-23 15:57 ` [dpdk-dev] [PATCH v5 02/20] eal: Allow passing const rte_intr_handle Jan Blunck
2017-01-17 4:42 ` Tan, Jianfeng
2016-12-23 15:57 ` [dpdk-dev] [PATCH v5 03/20] rte_device: make driver pointer const Jan Blunck
2016-12-23 16:19 ` Thomas Monjalon
2016-12-23 22:08 ` Stephen Hemminger
2016-12-23 15:57 ` [dpdk-dev] [PATCH v5 04/20] pmd: remove useless reset of dev_info->dev_pci Jan Blunck
2016-12-23 15:57 ` [dpdk-dev] [PATCH v5 05/20] e1000: localize mapping from eth_dev to pci Jan Blunck
2016-12-23 16:20 ` Thomas Monjalon
2016-12-23 22:06 ` Stephen Hemminger
2016-12-23 15:57 ` [dpdk-dev] [PATCH v5 06/20] ixgbe: localize mapping from eth_dev to pci_device Jan Blunck
2016-12-23 15:57 ` [dpdk-dev] [PATCH v5 07/20] i40e: localize mapping of eth_dev to pci Jan Blunck
2016-12-23 15:57 ` [dpdk-dev] [PATCH v5 08/20] broadcom: localize mapping from " Jan Blunck
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 09/20] virtio: Don't fill dev_info->driver_name Jan Blunck
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 10/20] virtio: Add vtpci_intr_handle() helper to get rte_intr_handle Jan Blunck
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 11/20] virtio: Don't depend on struct rte_eth_dev's pci_dev Jan Blunck
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 12/20] bnx2x: localize mapping from eth_dev to pci Jan Blunck
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 13/20] fm10k: " Jan Blunck
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 14/20] qede: localize mapping of " Jan Blunck
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 15/20] szedata2: localize handling of pci resources Jan Blunck
2016-12-23 18:31 ` Thomas Monjalon
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 16/20] nfp: localize rte_pci_device handling Jan Blunck
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 17/20] vmxnet3: use eth_dev->data->drv_name instead of pci_drv name Jan Blunck
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 18/20] ethdev: Decouple interrupt handling from PCI device Jan Blunck
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 19/20] ethdev: Move dev_info filling of PCI information into drivers Jan Blunck
2016-12-23 18:45 ` Thomas Monjalon
2016-12-23 15:58 ` [dpdk-dev] [PATCH v5 20/20] ethdev: Decouple from PCI device Jan Blunck
2016-12-23 16:17 ` Thomas Monjalon
2016-12-23 16:20 ` Jan Blunck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1482332986-7599-14-git-send-email-jblunck@infradead.org \
--to=jblunck@infradead.org \
--cc=david.marchand@6wind.com \
--cc=dev@dpdk.org \
--cc=shreyansh.jain@nxp.com \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).