From: Tomasz Duszynski <tdu@semihalf.com>
To: dev@dpdk.org
Cc: mw@semihalf.com, dima@marvell.com, nsamsono@marvell.com,
Jianbo.liu@linaro.org, Tomasz Duszynski <tdu@semihalf.com>,
Jacek Siuda <jck@semihalf.com>
Subject: [dpdk-dev] [PATCH v2 4/4] test: add mrvl crypto pmd unit tests
Date: Thu, 28 Sep 2017 12:23:32 +0200 [thread overview]
Message-ID: <1506594212-15803-5-git-send-email-tdu@semihalf.com> (raw)
In-Reply-To: <1506594212-15803-1-git-send-email-tdu@semihalf.com>
Add unit tests for MRVL CRYPTO PMD driver.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <jck@semihalf.com>
---
test/test/test_cryptodev.c | 168 ++++++++++++++++++++++++++++
test/test/test_cryptodev.h | 1 +
test/test/test_cryptodev_aes_test_vectors.h | 72 ++++++++----
test/test/test_cryptodev_blockcipher.c | 9 +-
test/test/test_cryptodev_blockcipher.h | 1 +
test/test/test_cryptodev_des_test_vectors.h | 24 ++--
6 files changed, 242 insertions(+), 33 deletions(-)
diff --git a/test/test/test_cryptodev.c b/test/test/test_cryptodev.c
index a4116c6..9fb6a2c 100644
--- a/test/test/test_cryptodev.c
+++ b/test/test/test_cryptodev.c
@@ -341,6 +341,28 @@ testsuite_setup(void)
}
}
+ /* Create a MRVL device if required */
+ if (gbl_driver_id == rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_MRVL_PMD))) {
+#ifndef RTE_LIBRTE_PMD_MRVL_CRYPTO
+ RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO must be"
+ " enabled in config file to run this testsuite.\n");
+ return TEST_FAILED;
+#endif
+ nb_devs = rte_cryptodev_device_count_by_driver(
+ rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_MRVL_PMD)));
+ if (nb_devs < 1) {
+ ret = rte_vdev_init(
+ RTE_STR(CRYPTODEV_NAME_MRVL_PMD),
+ NULL);
+
+ TEST_ASSERT(ret == 0, "Failed to create "
+ "instance of pmd : %s",
+ RTE_STR(CRYPTODEV_NAME_MRVL_PMD));
+ }
+ }
+
#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER
if (gbl_driver_id == rte_cryptodev_driver_id_get(
RTE_STR(CRYPTODEV_NAME_SCHEDULER_PMD))) {
@@ -1862,6 +1884,101 @@ test_AES_chain_armv8_all(void)
return TEST_SUCCESS;
}
+static int
+test_AES_chain_mrvl_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool,
+ ts_params->session_mpool,
+ ts_params->valid_devs[0],
+ rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+ BLKCIPHER_AES_CHAIN_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_AES_cipheronly_mrvl_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool,
+ ts_params->session_mpool,
+ ts_params->valid_devs[0],
+ rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+ BLKCIPHER_AES_CIPHERONLY_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_authonly_mrvl_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool,
+ ts_params->session_mpool,
+ ts_params->valid_devs[0],
+ rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+ BLKCIPHER_AUTHONLY_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_3DES_chain_mrvl_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool,
+ ts_params->session_mpool,
+ ts_params->valid_devs[0],
+ rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+ BLKCIPHER_3DES_CHAIN_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
+static int
+test_3DES_cipheronly_mrvl_all(void)
+{
+ struct crypto_testsuite_params *ts_params = &testsuite_params;
+ int status;
+
+ status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+ ts_params->op_mpool,
+ ts_params->session_mpool,
+ ts_params->valid_devs[0],
+ rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+ BLKCIPHER_3DES_CIPHERONLY_TYPE);
+
+ TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+ return TEST_SUCCESS;
+}
+
/* ***** SNOW 3G Tests ***** */
static int
create_wireless_algo_hash_session(uint8_t dev_id,
@@ -8939,6 +9056,40 @@ static struct unit_test_suite cryptodev_armv8_testsuite = {
}
};
+static struct unit_test_suite cryptodev_mrvl_testsuite = {
+ .suite_name = "Crypto Device Marvell Component Test Suite",
+ .setup = testsuite_setup,
+ .teardown = testsuite_teardown,
+ .unit_test_cases = {
+ TEST_CASE_ST(ut_setup, ut_teardown, test_multi_session),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_multi_session_random_usage),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_AES_chain_mrvl_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_AES_cipheronly_mrvl_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_authonly_mrvl_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_3DES_chain_mrvl_all),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ test_3DES_cipheronly_mrvl_all),
+
+ /** Negative tests */
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ authentication_verify_HMAC_SHA1_fail_data_corrupt),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ authentication_verify_HMAC_SHA1_fail_tag_corrupt),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ auth_decryption_AES128CBC_HMAC_SHA1_fail_data_corrupt),
+ TEST_CASE_ST(ut_setup, ut_teardown,
+ auth_decryption_AES128CBC_HMAC_SHA1_fail_tag_corrupt),
+
+ TEST_CASES_END() /**< NULL terminate unit test array */
+ }
+};
+
+
static int
test_cryptodev_qat(void /*argv __rte_unused, int argc __rte_unused*/)
{
@@ -9083,6 +9234,22 @@ test_cryptodev_armv8(void)
return unit_test_suite_runner(&cryptodev_armv8_testsuite);
}
+static int
+test_cryptodev_mrvl(void)
+{
+ gbl_driver_id = rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_MRVL_PMD));
+
+ if (gbl_driver_id == -1) {
+ RTE_LOG(ERR, USER1, "MRVL PMD must be loaded. Check if "
+ "CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO is enabled "
+ "in config file to run this testsuite.\n");
+ return TEST_FAILED;
+ }
+
+ return unit_test_suite_runner(&cryptodev_mrvl_testsuite);
+}
+
#ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER
static int
@@ -9136,4 +9303,5 @@ REGISTER_TEST_COMMAND(cryptodev_sw_snow3g_autotest, test_cryptodev_sw_snow3g);
REGISTER_TEST_COMMAND(cryptodev_sw_kasumi_autotest, test_cryptodev_sw_kasumi);
REGISTER_TEST_COMMAND(cryptodev_sw_zuc_autotest, test_cryptodev_sw_zuc);
REGISTER_TEST_COMMAND(cryptodev_sw_armv8_autotest, test_cryptodev_armv8);
+REGISTER_TEST_COMMAND(cryptodev_sw_mrvl_autotest, test_cryptodev_mrvl);
REGISTER_TEST_COMMAND(cryptodev_dpaa2_sec_autotest, test_cryptodev_dpaa2_sec);
diff --git a/test/test/test_cryptodev.h b/test/test/test_cryptodev.h
index 4509a09..2e9eb0b 100644
--- a/test/test/test_cryptodev.h
+++ b/test/test/test_cryptodev.h
@@ -88,6 +88,7 @@
#define CRYPTODEV_NAME_ARMV8_PMD crypto_armv8
#define CRYPTODEV_NAME_DPAA2_SEC_PMD crypto_dpaa2_sec
#define CRYPTODEV_NAME_SCHEDULER_PMD crypto_scheduler
+#define CRYPTODEV_NAME_MRVL_PMD crypto_mrvl
/**
* Write (spread) data from buffer to mbuf data
diff --git a/test/test/test_cryptodev_aes_test_vectors.h b/test/test/test_cryptodev_aes_test_vectors.h
index e410018..0af50fd 100644
--- a/test/test/test_cryptodev_aes_test_vectors.h
+++ b/test/test/test_cryptodev_aes_test_vectors.h
@@ -1197,7 +1197,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-128-CTR HMAC-SHA1 Decryption Digest "
@@ -1208,7 +1209,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-192-CTR XCBC Encryption Digest",
@@ -1245,7 +1247,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-256-CTR HMAC-SHA1 Decryption Digest "
@@ -1256,7 +1259,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest",
@@ -1267,14 +1271,16 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest "
"(short buffers)",
.test_data = &aes_test_data_13,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest "
@@ -1298,14 +1304,16 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-128-CBC HMAC-SHA1 Decryption Digest "
"Verify (short buffers)",
.test_data = &aes_test_data_13,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-128-CBC HMAC-SHA256 Encryption Digest",
@@ -1316,14 +1324,16 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-128-CBC HMAC-SHA256 Encryption Digest "
"(short buffers)",
.test_data = &aes_test_data_12,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-128-CBC HMAC-SHA256 Decryption Digest "
@@ -1335,14 +1345,16 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-128-CBC HMAC-SHA256 Decryption Digest "
"Verify (short buffers)",
.test_data = &aes_test_data_12,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-128-CBC HMAC-SHA512 Encryption Digest",
@@ -1352,7 +1364,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-128-CBC HMAC-SHA512 Encryption Digest "
@@ -1383,7 +1396,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-128-CBC HMAC-SHA512 Decryption Digest "
@@ -1462,7 +1476,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-128-CBC HMAC-SHA384 Decryption Digest "
@@ -1473,7 +1488,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest "
@@ -1505,7 +1521,8 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_MB |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-128-CBC Decryption",
@@ -1515,7 +1532,8 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_MB |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-192-CBC Encryption",
@@ -1553,7 +1571,8 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_MB |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-256-CBC Decryption",
@@ -1563,7 +1582,8 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_MB |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-256-CBC OOP Encryption",
@@ -1589,7 +1609,8 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_MB |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-128-CTR Decryption",
@@ -1599,7 +1620,8 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_MB |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-192-CTR Encryption",
@@ -1629,7 +1651,8 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_MB |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-256-CTR Decryption",
@@ -1639,7 +1662,8 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
BLOCKCIPHER_TEST_TARGET_PMD_MB |
BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "AES-128-CTR Encryption (12-byte IV)",
diff --git a/test/test/test_cryptodev_blockcipher.c b/test/test/test_cryptodev_blockcipher.c
index 6089af4..01fe136 100644
--- a/test/test/test_cryptodev_blockcipher.c
+++ b/test/test/test_cryptodev_blockcipher.c
@@ -92,6 +92,8 @@ test_blockcipher_one_case(const struct blockcipher_test_case *t,
RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD));
int dpaa2_sec_pmd = rte_cryptodev_driver_id_get(
RTE_STR(CRYPTODEV_NAME_DPAA2_SEC_PMD));
+ int mrvl_pmd = rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_MRVL_PMD));
int nb_segs = 1;
@@ -116,7 +118,8 @@ test_blockcipher_one_case(const struct blockcipher_test_case *t,
if (driver_id == dpaa2_sec_pmd ||
driver_id == qat_pmd ||
driver_id == openssl_pmd ||
- driver_id == armv8_pmd) { /* Fall through */
+ driver_id == armv8_pmd ||
+ driver_id == mrvl_pmd) { /* Fall through */
digest_len = tdata->digest.len;
} else if (driver_id == aesni_mb_pmd ||
driver_id == scheduler_pmd) {
@@ -612,6 +615,8 @@ test_blockcipher_all_tests(struct rte_mempool *mbuf_pool,
RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD));
int qat_pmd = rte_cryptodev_driver_id_get(
RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD));
+ int mrvl_pmd = rte_cryptodev_driver_id_get(
+ RTE_STR(CRYPTODEV_NAME_MRVL_PMD));
switch (test_type) {
case BLKCIPHER_AES_CHAIN_TYPE:
@@ -670,6 +675,8 @@ test_blockcipher_all_tests(struct rte_mempool *mbuf_pool,
target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER;
else if (driver_id == dpaa2_pmd)
target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC;
+ else if (driver_id == mrvl_pmd)
+ target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MRVL;
else
TEST_ASSERT(0, "Unrecognized cryptodev type");
diff --git a/test/test/test_cryptodev_blockcipher.h b/test/test/test_cryptodev_blockcipher.h
index 22b8d20..6919336 100644
--- a/test/test/test_cryptodev_blockcipher.h
+++ b/test/test/test_cryptodev_blockcipher.h
@@ -53,6 +53,7 @@
#define BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 0x0008 /* ARMv8 flag */
#define BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER 0x0010 /* Scheduler */
#define BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC 0x0020 /* DPAA2_SEC flag */
+#define BLOCKCIPHER_TEST_TARGET_PMD_MRVL 0x0040 /* Marvell flag */
#define BLOCKCIPHER_TEST_OP_CIPHER (BLOCKCIPHER_TEST_OP_ENCRYPT | \
BLOCKCIPHER_TEST_OP_DECRYPT)
diff --git a/test/test/test_cryptodev_des_test_vectors.h b/test/test/test_cryptodev_des_test_vectors.h
index 0b6e0b8..ffcf657 100644
--- a/test/test/test_cryptodev_des_test_vectors.h
+++ b/test/test/test_cryptodev_des_test_vectors.h
@@ -851,13 +851,15 @@ static const struct blockcipher_test_case des_cipheronly_test_cases[] = {
.test_descr = "DES-CBC Encryption",
.test_data = &des_cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "DES-CBC Decryption",
.test_data = &des_cbc_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
};
@@ -1087,7 +1089,8 @@ static const struct blockcipher_test_case triple_des_chain_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "3DES-192-CBC HMAC-SHA1 Decryption Digest Verify",
@@ -1095,19 +1098,22 @@ static const struct blockcipher_test_case triple_des_chain_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "3DES-192-CBC SHA1 Encryption Digest",
.test_data = &triple_des192cbc_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "3DES-192-CBC SHA1 Decryption Digest Verify",
.test_data = &triple_des192cbc_sha1_test_vector,
.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
- .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+ .pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "3DES-128-CTR HMAC-SHA1 Encryption Digest",
@@ -1220,7 +1226,8 @@ static const struct blockcipher_test_case triple_des_cipheronly_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "3DES-192-CBC Decryption",
@@ -1228,7 +1235,8 @@ static const struct blockcipher_test_case triple_des_cipheronly_test_cases[] = {
.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
BLOCKCIPHER_TEST_TARGET_PMD_QAT |
- BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC
+ BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
+ BLOCKCIPHER_TEST_TARGET_PMD_MRVL
},
{
.test_descr = "3DES-128-CTR Encryption",
--
2.7.4
next prev parent reply other threads:[~2017-09-28 10:23 UTC|newest]
Thread overview: 110+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-26 9:39 [dpdk-dev] [PATCH 0/8] add net/crypto mrvl pmd drivers Tomasz Duszynski
2017-09-26 9:39 ` [dpdk-dev] [PATCH 1/8] app: link the whole rte_cfgfile library Tomasz Duszynski
2017-09-26 14:31 ` Bruce Richardson
2017-09-27 7:36 ` Tomasz Duszynski
2017-09-27 12:01 ` Bruce Richardson
2017-09-26 9:39 ` [dpdk-dev] [PATCH 2/8] net/mrvl: add mrvl net pmd driver Tomasz Duszynski
2017-09-26 9:40 ` [dpdk-dev] [PATCH 3/8] doc: add mrvl net pmd documentation Tomasz Duszynski
2017-09-26 9:40 ` [dpdk-dev] [PATCH 4/8] maintainers: add maintainers for the mrvl net pmd Tomasz Duszynski
2017-09-26 9:40 ` [dpdk-dev] [PATCH 5/8] crypto/mrvl: add mrvl crypto pmd driver Tomasz Duszynski
2017-09-26 9:40 ` [dpdk-dev] [PATCH 6/8] doc: add mrvl crypto pmd documentation Tomasz Duszynski
2017-09-26 9:40 ` [dpdk-dev] [PATCH 7/8] maintainers: add maintainers for the mrvl crypto pmd Tomasz Duszynski
2017-09-26 9:40 ` [dpdk-dev] [PATCH 8/8] test: add mrvl crypto pmd unit tests Tomasz Duszynski
2017-09-27 9:40 ` [dpdk-dev] [PATCH 0/8] add net/crypto mrvl pmd drivers De Lara Guarch, Pablo
2017-09-27 10:59 ` Tomasz Duszynski
2017-09-28 10:22 ` [dpdk-dev] [PATCH v2 0/4] add net mrvl pmd driver Tomasz Duszynski
2017-09-28 10:22 ` [dpdk-dev] [PATCH v2 1/4] app: link the whole rte_cfgfile library Tomasz Duszynski
2017-10-03 11:51 ` [dpdk-dev] [PATCH v3 0/4] add net mrvl pmd driver Tomasz Duszynski
2017-10-03 11:51 ` [dpdk-dev] [PATCH v3 1/4] app: link the whole rte_cfgfile library Tomasz Duszynski
2017-10-03 11:51 ` [dpdk-dev] [PATCH v3 2/4] net/mrvl: add mrvl net pmd driver Tomasz Duszynski
2017-10-04 0:24 ` Ferruh Yigit
2017-10-04 8:59 ` Tomasz Duszynski
2017-10-04 16:59 ` Ferruh Yigit
2017-10-05 8:43 ` Tomasz Duszynski
2017-10-05 17:29 ` Ferruh Yigit
2017-10-06 6:41 ` Tomasz Duszynski
2017-10-10 21:25 ` Thomas Monjalon
2017-10-04 0:28 ` Ferruh Yigit
2017-10-04 13:19 ` Tomasz Duszynski
2017-10-05 17:37 ` Ferruh Yigit
2017-10-03 11:51 ` [dpdk-dev] [PATCH v3 3/4] doc: add mrvl net pmd documentation Tomasz Duszynski
2017-10-04 0:29 ` Ferruh Yigit
2017-10-04 7:53 ` Tomasz Duszynski
2017-10-03 11:51 ` [dpdk-dev] [PATCH v3 4/4] maintainers: add maintainers for the mrvl net pmd Tomasz Duszynski
2017-10-09 15:00 ` [dpdk-dev] [PATCH v4 00/16] add net mrvl pmd driver Tomasz Duszynski
2017-10-09 15:00 ` [dpdk-dev] [PATCH v4 01/16] app: link the whole rte_cfgfile library Tomasz Duszynski
2017-10-09 15:00 ` [dpdk-dev] [PATCH v4 02/16] net/mrvl: add mrvl net pmd driver skeleton Tomasz Duszynski
2017-10-11 13:38 ` Thomas Monjalon
2017-10-12 6:51 ` Tomasz Duszynski
2017-10-12 7:59 ` Vincent JARDIN
2017-10-12 12:14 ` Jacek Siuda
2017-10-12 13:57 ` Vincent JARDIN
2017-10-09 15:00 ` [dpdk-dev] [PATCH v4 03/16] net/mrvl: add rx/tx support Tomasz Duszynski
2017-10-09 15:00 ` [dpdk-dev] [PATCH v4 04/16] net/mrvl: add link update Tomasz Duszynski
2017-10-09 15:00 ` [dpdk-dev] [PATCH v4 05/16] net/mrvl: add link speed capabilities Tomasz Duszynski
2017-10-09 15:00 ` [dpdk-dev] [PATCH v4 06/16] net/mrvl: add support for updating mtu Tomasz Duszynski
2017-10-09 15:00 ` [dpdk-dev] [PATCH v4 07/16] net/mrvl: add jumbo frame support Tomasz Duszynski
2017-10-09 15:00 ` [dpdk-dev] [PATCH v4 08/16] net/mrvl: add support for promiscuous and allmulticast modes Tomasz Duszynski
2017-10-09 15:00 ` [dpdk-dev] [PATCH v4 09/16] net/mrvl: add support for mac filtering Tomasz Duszynski
2017-10-09 15:00 ` [dpdk-dev] [PATCH v4 10/16] net/mrvl: add rss hashing support Tomasz Duszynski
2017-10-09 15:00 ` [dpdk-dev] [PATCH v4 11/16] net/mrvl: add support for vlan filtering Tomasz Duszynski
2017-10-09 15:00 ` [dpdk-dev] [PATCH v4 12/16] net/mrvl: add crc, l3 and l4 offloads support Tomasz Duszynski
2017-10-09 15:00 ` [dpdk-dev] [PATCH v4 13/16] net/mrvl: add packet type parsing support Tomasz Duszynski
2017-10-09 15:00 ` [dpdk-dev] [PATCH v4 14/16] net/mrvl: add basic stats support Tomasz Duszynski
2017-10-09 15:00 ` [dpdk-dev] [PATCH v4 15/16] maintainers: add maintainers for the mrvl net pmd Tomasz Duszynski
2017-10-09 19:02 ` Ferruh Yigit
2017-10-09 19:09 ` Marcin Wojtas
2017-10-09 19:12 ` Ferruh Yigit
2017-10-10 5:47 ` Tomasz Duszynski
2017-10-10 3:20 ` Jianbo Liu
2017-10-10 4:38 ` Ferruh Yigit
2017-10-09 15:00 ` [dpdk-dev] [PATCH v4 16/16] doc: add mrvl net pmd documentation Tomasz Duszynski
2017-10-09 20:54 ` Ferruh Yigit
2017-10-10 5:51 ` Tomasz Duszynski
2017-10-11 14:27 ` Thomas Monjalon
2017-10-12 2:01 ` Thomas Monjalon
2017-10-09 20:59 ` [dpdk-dev] [PATCH v4 00/16] add net mrvl pmd driver Ferruh Yigit
2017-10-10 0:25 ` Ferruh Yigit
2017-10-10 7:07 ` Tomasz Duszynski
2017-10-10 5:55 ` Tomasz Duszynski
2017-10-12 1:51 ` Ferruh Yigit
2017-10-12 2:37 ` [dpdk-dev] [PATCH] doc: add build steps to mrvl NIC guide Thomas Monjalon
2017-10-12 6:28 ` Tomasz Duszynski
2017-10-12 8:02 ` Thomas Monjalon
2017-10-12 6:07 ` [dpdk-dev] [PATCH v4 00/16] add net mrvl pmd driver Tomasz Duszynski
2017-09-28 10:22 ` [dpdk-dev] [PATCH v2 2/4] net/mrvl: add mrvl net " Tomasz Duszynski
2017-09-29 15:38 ` Stephen Hemminger
2017-10-02 11:08 ` Bruce Richardson
2017-10-03 6:33 ` Tomasz Duszynski
2017-10-03 6:23 ` Tomasz Duszynski
2017-09-28 10:22 ` [dpdk-dev] [PATCH v2 3/4] doc: add mrvl net pmd documentation Tomasz Duszynski
2017-09-28 10:22 ` [dpdk-dev] [PATCH v2 4/4] maintainers: add maintainers for the mrvl net pmd Tomasz Duszynski
2017-09-28 11:06 ` [dpdk-dev] [PATCH v2 0/4] add net mrvl pmd driver Ferruh Yigit
2017-09-28 11:40 ` Amit Tomer
2017-09-28 12:01 ` Marcin Wojtas
2017-09-28 10:23 ` [dpdk-dev] [PATCH v2 0/4] add crypto " Tomasz Duszynski
2017-09-28 10:23 ` [dpdk-dev] [PATCH v2 1/4] crypto/mrvl: add mrvl crypto " Tomasz Duszynski
2017-10-05 15:01 ` De Lara Guarch, Pablo
2017-10-06 7:24 ` Tomasz Duszynski
2017-10-05 15:47 ` Bruce Richardson
2017-10-06 7:05 ` Tomasz Duszynski
2017-09-28 10:23 ` [dpdk-dev] [PATCH v2 2/4] doc: add mrvl crypto pmd documentation Tomasz Duszynski
2017-10-05 14:45 ` De Lara Guarch, Pablo
2017-10-06 8:06 ` Tomasz Duszynski
2017-09-28 10:23 ` [dpdk-dev] [PATCH v2 3/4] maintainers: add maintainers for the mrvl crypto pmd Tomasz Duszynski
2017-09-28 10:23 ` Tomasz Duszynski [this message]
2017-10-07 20:28 ` [dpdk-dev] [PATCH v3 0/4] add crypto mrvl pmd driver Tomasz Duszynski
2017-10-07 20:28 ` [dpdk-dev] [PATCH v3 1/4] crypto/mrvl: add mrvl crypto " Tomasz Duszynski
2017-10-10 10:16 ` De Lara Guarch, Pablo
2017-10-10 10:25 ` Tomasz Duszynski
2017-10-07 20:28 ` [dpdk-dev] [PATCH v3 2/4] doc: add mrvl crypto pmd documentation Tomasz Duszynski
2017-10-07 20:28 ` [dpdk-dev] [PATCH v3 3/4] maintainers: add maintainers for the mrvl crypto pmd Tomasz Duszynski
2017-10-07 20:28 ` [dpdk-dev] [PATCH v3 4/4] test: add mrvl crypto pmd unit tests Tomasz Duszynski
2017-10-10 10:44 ` De Lara Guarch, Pablo
2017-10-10 10:57 ` Tomasz Duszynski
2017-10-10 12:17 ` [dpdk-dev] [PATCH v4 0/4] add crypto mrvl pmd driver Tomasz Duszynski
2017-10-10 12:17 ` [dpdk-dev] [PATCH v4 1/4] crypto/mrvl: add mrvl crypto " Tomasz Duszynski
2017-10-10 12:17 ` [dpdk-dev] [PATCH v4 2/4] doc: add mrvl crypto pmd documentation Tomasz Duszynski
2017-10-10 12:17 ` [dpdk-dev] [PATCH v4 3/4] maintainers: add maintainers for the mrvl crypto pmd Tomasz Duszynski
2017-10-10 12:17 ` [dpdk-dev] [PATCH v4 4/4] test: add mrvl crypto pmd unit tests Tomasz Duszynski
2017-10-12 12:11 ` [dpdk-dev] [PATCH v4 0/4] add crypto mrvl pmd driver De Lara Guarch, Pablo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1506594212-15803-5-git-send-email-tdu@semihalf.com \
--to=tdu@semihalf.com \
--cc=Jianbo.liu@linaro.org \
--cc=dev@dpdk.org \
--cc=dima@marvell.com \
--cc=jck@semihalf.com \
--cc=mw@semihalf.com \
--cc=nsamsono@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).