From: Qi Zhang <qi.z.zhang@intel.com>
To: adrien.mazarguil@6wind.com
Cc: dev@dpdk.org, declan.doherty@intel.com, Qi Zhang <qi.z.zhang@intel.com>
Subject: [dpdk-dev] [RFC v2 5/5] ether: add packet modification aciton in rte_flow
Date: Wed, 20 Dec 2017 21:35:19 -0500 [thread overview]
Message-ID: <1513823719-36066-6-git-send-email-qi.z.zhang@intel.com> (raw)
In-Reply-To: <1513823719-36066-1-git-send-email-qi.z.zhang@intel.com>
Add new actions that be used to modify packet content with generic semantic:
RTE_FLOW_ACTION_TYPE_FIELD_UPDATE: update specific field of packet
RTE_FLWO_ACTION_TYPE_FIELD_INCREMENT: increament specific field of packet
RTE_FLWO_ACTION_TYPE_FIELD_DECREMENT: decreament specific field of packet
RTE_FLWO_ACTION_TYPE_FIELD_COPY: copy data from one field to another in packet.
All action use struct rte_flow_item parameter to match the pattern that going
to be modified, if no pattern match, the action just be skipped.
These action are non-terminating action. they will not impact the fate of the
packets.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
---
doc/guides/prog_guide/rte_flow.rst | 89 ++++++++++++++++++++++++++++++++++++++
lib/librte_ether/rte_flow.h | 79 +++++++++++++++++++++++++++++++++
2 files changed, 168 insertions(+)
diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst
index 1a242fc..b706a78 100644
--- a/doc/guides/prog_guide/rte_flow.rst
+++ b/doc/guides/prog_guide/rte_flow.rst
@@ -1504,6 +1504,95 @@ Representor.
| ``port_id`` | identification of the destination |
+--------------+-----------------------------------+
+Action: ``FILED_UPDATE``
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Update specific field of the packet.
+
+- Non-terminating by default.
+
+.. _table_rte_flow_action_field_update:
+
+.. table:: FIELD_UPDATE
+
+ +-----------+---------------------------------------------------------+
+ | Field | Value |
+ +===========+=========================================================+
+ | ``item`` | item->type: specify the pattern to modify |
+ | | item->spec: specify the new value to update |
+ | | item->mask: specify which part of the pattern to update |
+ | | item->last: ignored |
+ +-----------+---------------------------------------------------------+
+ | ``layer`` | 0 means outermost matched pattern, |
+ | | 1 means next-to-outermost and so on ... |
+ +-----------+---------------------------------------------------------+
+
+Action: ``FILED_INCREMENT``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Increment 1 on specific field of the packet.
+
+- Non-terminating by default.
+
+.. _table_rte_flow_action_field_increment:
+
+.. table:: FIELD_INCREMENT
+
+ +-----------+---------------------------------------------------------+
+ | Field | Value |
+ +===========+=========================================================+
+ | ``item`` | item->type: specify the pattern to modify |
+ | | item->spec: ignored |
+ | | item->mask: specify which part of the pattern to update |
+ | | item->last: ignored |
+ +-----------+---------------------------------------------------------+
+ | ``layer`` | 0 means outermost matched pattern, |
+ | | 1 means next-to-outermost and so on ... |
+ +-----------+---------------------------------------------------------+
+
+Action: ``FIELD_DECREMENT``
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Decrement 1 on specific field of the packet.
+
+Paramenter is same is FIELD_INCREMENT.
+
+-Non-terminating by default.
+
+ACTION: ``FIELD_COPY``
+^^^^^^^^^^^^^^^^^^^^^^
+
+Copy data of one field to another of the packet.
+
+-Non-terminating by default.
+
+.. _table_rte_flow_action_field_increment:
+
+.. table:: FIELD_COPY
+
+ +-----------------+-----------------------------------------------------------------+
+ | Field | Value |
+ +=================+=================================================================+
+ | ``src_item`` | src_item->type: match the pattern that data will be copy from |
+ | | src_item->spec: ignored |
+ | | src_item->mask: specify which part of the pattern to copy |
+ | | src_item->last: ignored |
+ +-----------------+-----------------------------------------------------------------+
+ | ``src_layer`` | layer of src_item |
+ | | 0 means outermost matched pattern, |
+ | | 1 means next-to-outermost and so on ... |
+ +-----------------+-----------------------------------------------------------------+
+ | ``dst_item`` | dst_item->type: match the pattern that data will be copy to |
+ | | dst_item->spec: ignored |
+ | | dst_item->mask: specify which part of the pattern to be update |
+ | | it must match src_item->mask. |
+ | | dst_item->last: ignored |
+ +-----------------+-----------------------------------------------------------------+
+ | ``dst_layer`` | layer of dst_item |
+ | | 0 means outermost matched pattern, |
+ | | 1 means next-to-outermost and so on ... |
+ +-----------------+-----------------------------------------------------------------+
+
Negative types
~~~~~~~~~~~~~~
diff --git a/lib/librte_ether/rte_flow.h b/lib/librte_ether/rte_flow.h
index 4ee2b62..12f194f 100644
--- a/lib/librte_ether/rte_flow.h
+++ b/lib/librte_ether/rte_flow.h
@@ -1176,6 +1176,34 @@ enum rte_flow_action_type {
* See struct rte_flow_action_port.
*/
RTE_FLOW_ACTION_TYPE_PORT,
+
+ /**
+ * Update specific field of the packet.
+ *
+ * See struct rte_flow_item_type_field_update.
+ */
+ RTE_FLOW_ACTION_TYPE_FILED_UPDATE,
+
+ /**
+ * Increment specific field of the packet.
+ *
+ * See struct rte_flow_item_type_field_increment.
+ */
+ RTE_FLOW_ACTION_TYPE_FIELD_INCREMENT,
+
+ /**
+ * Decrement specific field of the packet.
+ *
+ * See struct rte_flow_item_type_field_decrement.
+ */
+ RTE_FLOW_ACTION_TYPE_FIELD_DECREMENT,
+
+ /**
+ * Copy data of one field to another of the packet.
+ *
+ * See struct rte_flow_item_type_field_copy.
+ */
+ RTE_FLOW_ACTION_TYPE_FIELD_COPY,
};
/**
@@ -1325,6 +1353,57 @@ struct rte_flow_action_port {
uint16_t port_id; /**< identification of the forward destination. */
};
+/** RTE_FLOW_ACTION_TYPE_FIELD_UPDATE
+ *
+ * Update specific field of the packet.
+ *
+ * Typical usage: update mac/ip address.
+ */
+struct rte_flow_action_field_update {
+ const struct rte_flow_item *item; /**< specify the data to modify. */
+ uint8_t layer;
+ /**< 0 means outermost matched pattern, 1 means next-to-outermost... */
+};
+
+/** RTE_FLOW_ACTION_TYPE_FIELD_INCREMENT
+ *
+ * Increment 1 on specific field of the packet.
+ *
+ * Typical usage: increase TTL
+ */
+struct rte_flow_action_field_increment {
+ const struct rte_flow_item *item; /**< specify the data to modify. */
+ uint8_t layer;
+ /**< 0 means outermost matched pattern, 1 means next-to-outermost... */
+};
+
+/** RTE_FLOW_ACTION_TYPE_FIELD_DECREMENT
+ *
+ * Decrement 1 on specific field of the packet.
+ *
+ * Typical usage: Decrease TTL
+ */
+struct rte_flow_action_field_decrement {
+ const struct rte_flow_item *item; /**< Specify the data to modify. */
+ uint8_t layer;
+ /**< 0 means outermost matched pattern, 1 means next-to-outermost... */
+};
+
+/** RTE_FLOW_ACTION_TYPE_FIELD_COPY
+ *
+ * Copy data from one field to another of the packet.
+ *
+ * Typical usage: TTL copy-in / copy-out
+ */
+struct rte_flow_action_field_copy {
+ const struct rte_flow_item *src_item; /**< Specify the data copy from */
+ uint8_t src_layer;
+ /**< 0 means outermost matched pattern, 1 means next-to-outermost... */
+ const struct rte_flow_item *dst_item; /**< Specify the data copy to */
+ uint8_t dst_layer;
+ /**< 0 means outermost matched pattern, 1 means next-to-outermost... */
+};
+
/**
* Definition of a single action.
*
--
2.7.4
next prev parent reply other threads:[~2017-12-21 9:45 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-21 2:35 [dpdk-dev] [RFC v2 0/5] rte_flow extension for vSwitch acceleration Qi Zhang
2017-12-21 2:35 ` [dpdk-dev] [RFC v2 1/5] ether: add flow action to redirect packet in a switch domain Qi Zhang
2017-12-21 12:37 ` Alex Rosenbaum
2017-12-22 8:20 ` Zhang, Qi Z
2017-12-22 22:10 ` Alex Rosenbaum
2017-12-21 2:35 ` [dpdk-dev] [RFC v2 2/5] ether: add flow last hit query support Qi Zhang
2017-12-21 2:35 ` [dpdk-dev] [RFC v2 3/5] ether: Add flow timeout support Qi Zhang
2017-12-21 13:59 ` Alex Rosenbaum
2017-12-22 9:03 ` Zhang, Qi Z
2017-12-22 14:06 ` Wiles, Keith
2018-01-14 2:03 ` Zhang, Qi Z
2017-12-22 22:26 ` Alex Rosenbaum
2017-12-26 3:28 ` Zhang, Qi Z
2017-12-26 7:44 ` Alex Rosenbaum
2017-12-21 2:35 ` [dpdk-dev] [RFC v2 4/5] ether: add more protocol support in rte_flow Qi Zhang
2017-12-21 2:35 ` Qi Zhang [this message]
2017-12-21 13:01 ` [dpdk-dev] [RFC v2 0/5] rte_flow extension for vSwitch acceleration Alex Rosenbaum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1513823719-36066-6-git-send-email-qi.z.zhang@intel.com \
--to=qi.z.zhang@intel.com \
--cc=adrien.mazarguil@6wind.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).