From: Matan Azrad <matan@mellanox.com>
To: Thomas Monjalon <thomas@monjalon.net>,
Gaetan Rivet <gaetan.rivet@6wind.com>,
Jingjing Wu <jingjing.wu@intel.com>
Cc: dev@dpdk.org, Neil Horman <nhorman@tuxdriver.com>,
Bruce Richardson <bruce.richardson@intel.com>,
Konstantin Ananyev <konstantin.ananyev@intel.com>
Subject: [dpdk-dev] [PATCH v2 2/6] ethdev: add port ownership
Date: Sun, 7 Jan 2018 09:45:47 +0000 [thread overview]
Message-ID: <1515318351-4756-3-git-send-email-matan@mellanox.com> (raw)
In-Reply-To: <1515318351-4756-1-git-send-email-matan@mellanox.com>
The ownership of a port is implicit in DPDK.
Making it explicit is better from the next reasons:
1. It will define well who is in charge of the port usage synchronization.
2. A library could work on top of a port.
3. A port can work on top of another port.
Also in the fail-safe case, an issue has been met in testpmd.
We need to check that the application is not trying to use a port which
is already managed by fail-safe.
A port owner is built from owner id(number) and owner name(string) while
the owner id must be unique to distinguish between two identical entity
instances and the owner name can be any name.
The name helps to logically recognize the owner by different DPDK
entities and allows easy debug.
Each DPDK entity can allocate an owner unique identifier and can use it
and its preferred name to owns valid ethdev ports.
Each DPDK entity can get any port owner status to decide if it can
manage the port or not.
The mechanism is synchronized for both the primary process threads and
the secondary processes threads to allow secondary process entity to be
a port owner.
Add a sinchronized ownership mechanism to DPDK Ethernet devices to
avoid multiple management of a device by different DPDK entities.
The current ethdev internal port management is not affected by this
feature.
Signed-off-by: Matan Azrad <matan@mellanox.com>
---
doc/guides/prog_guide/poll_mode_drv.rst | 14 ++-
lib/librte_ether/rte_ethdev.c | 206 ++++++++++++++++++++++++++++++--
lib/librte_ether/rte_ethdev.h | 89 ++++++++++++++
lib/librte_ether/rte_ethdev_version.map | 12 ++
4 files changed, 311 insertions(+), 10 deletions(-)
diff --git a/doc/guides/prog_guide/poll_mode_drv.rst b/doc/guides/prog_guide/poll_mode_drv.rst
index 6a0c9f9..046cde7 100644
--- a/doc/guides/prog_guide/poll_mode_drv.rst
+++ b/doc/guides/prog_guide/poll_mode_drv.rst
@@ -156,8 +156,8 @@ concurrently on the same tx queue without SW lock. This PMD feature found in som
See `Hardware Offload`_ for ``DEV_TX_OFFLOAD_MT_LOCKFREE`` capability probing details.
-Device Identification and Configuration
----------------------------------------
+Device Identification, Ownership and Configuration
+--------------------------------------------------
Device Identification
~~~~~~~~~~~~~~~~~~~~~
@@ -171,6 +171,16 @@ Based on their PCI identifier, NIC ports are assigned two other identifiers:
* A port name used to designate the port in console messages, for administration or debugging purposes.
For ease of use, the port name includes the port index.
+Port Ownership
+~~~~~~~~~~~~~~
+The Ethernet devices ports can be owned by a single DPDK entity (application, library, PMD, process, etc).
+The ownership mechanism is controlled by ethdev APIs and allows to set/remove/get a port owner by DPDK entities.
+Allowing this should prevent any multiple management of Ethernet port by different entities.
+
+.. note::
+
+ It is the DPDK entity responsibility to set the port owner before using it and to manage the port usage synchronization between different threads or processes.
+
Device Configuration
~~~~~~~~~~~~~~~~~~~~
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 684e3e8..0e12452 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -70,7 +70,10 @@
static const char *MZ_RTE_ETH_DEV_DATA = "rte_eth_dev_data";
struct rte_eth_dev rte_eth_devices[RTE_MAX_ETHPORTS];
+/* ports data array stored in shared memory */
static struct rte_eth_dev_data *rte_eth_dev_data;
+/* next owner identifier stored in shared memory */
+static uint16_t *rte_eth_next_owner_id;
static uint8_t eth_dev_last_created_port;
/* spinlock for eth device callbacks */
@@ -82,6 +85,9 @@
/* spinlock for add/remove tx callbacks */
static rte_spinlock_t rte_eth_tx_cb_lock = RTE_SPINLOCK_INITIALIZER;
+/* spinlock for eth device ownership management stored in shared memory */
+static rte_spinlock_t *rte_eth_dev_ownership_lock;
+
/* store statistics names and its offset in stats structure */
struct rte_eth_xstats_name_off {
char name[RTE_ETH_XSTATS_NAME_SIZE];
@@ -153,14 +159,18 @@ enum {
}
static void
-rte_eth_dev_data_alloc(void)
+rte_eth_dev_share_data_alloc(void)
{
const unsigned flags = 0;
const struct rte_memzone *mz;
+ const unsigned int data_size = RTE_MAX_ETHPORTS *
+ sizeof(*rte_eth_dev_data);
if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ /* Allocate shared memory for port data and ownership */
mz = rte_memzone_reserve(MZ_RTE_ETH_DEV_DATA,
- RTE_MAX_ETHPORTS * sizeof(*rte_eth_dev_data),
+ data_size + sizeof(*rte_eth_next_owner_id) +
+ sizeof(*rte_eth_dev_ownership_lock),
rte_socket_id(), flags);
} else
mz = rte_memzone_lookup(MZ_RTE_ETH_DEV_DATA);
@@ -168,9 +178,17 @@ enum {
rte_panic("Cannot allocate memzone for ethernet port data\n");
rte_eth_dev_data = mz->addr;
- if (rte_eal_process_type() == RTE_PROC_PRIMARY)
- memset(rte_eth_dev_data, 0,
- RTE_MAX_ETHPORTS * sizeof(*rte_eth_dev_data));
+ rte_eth_next_owner_id = (uint16_t *)((uintptr_t)mz->addr +
+ data_size);
+ rte_eth_dev_ownership_lock = (rte_spinlock_t *)
+ ((uintptr_t)rte_eth_next_owner_id +
+ sizeof(*rte_eth_next_owner_id));
+
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ memset(rte_eth_dev_data, 0, data_size);
+ *rte_eth_next_owner_id = RTE_ETH_DEV_NO_OWNER + 1;
+ rte_spinlock_init(rte_eth_dev_ownership_lock);
+ }
}
struct rte_eth_dev *
@@ -225,7 +243,7 @@ struct rte_eth_dev *
}
if (rte_eth_dev_data == NULL)
- rte_eth_dev_data_alloc();
+ rte_eth_dev_share_data_alloc();
if (rte_eth_dev_allocated(name) != NULL) {
RTE_PMD_DEBUG_TRACE("Ethernet Device with name %s already allocated!\n",
@@ -253,7 +271,7 @@ struct rte_eth_dev *
struct rte_eth_dev *eth_dev;
if (rte_eth_dev_data == NULL)
- rte_eth_dev_data_alloc();
+ rte_eth_dev_share_data_alloc();
for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
if (strcmp(rte_eth_dev_data[i].name, name) == 0)
@@ -278,8 +296,12 @@ struct rte_eth_dev *
if (eth_dev == NULL)
return -EINVAL;
- memset(eth_dev->data, 0, sizeof(struct rte_eth_dev_data));
+ rte_spinlock_lock(rte_eth_dev_ownership_lock);
+
eth_dev->state = RTE_ETH_DEV_UNUSED;
+ memset(eth_dev->data, 0, sizeof(struct rte_eth_dev_data));
+
+ rte_spinlock_unlock(rte_eth_dev_ownership_lock);
return 0;
}
@@ -294,6 +316,174 @@ struct rte_eth_dev *
return 1;
}
+static int
+rte_eth_is_valid_owner_id(uint16_t owner_id)
+{
+ if (owner_id == RTE_ETH_DEV_NO_OWNER ||
+ (*rte_eth_next_owner_id > RTE_ETH_DEV_NO_OWNER &&
+ *rte_eth_next_owner_id <= owner_id)) {
+ RTE_LOG(ERR, EAL, "Invalid owner_id=%d.\n", owner_id);
+ return 0;
+ }
+ return 1;
+}
+
+uint16_t
+rte_eth_find_next_owned_by(uint16_t port_id, const uint16_t owner_id)
+{
+ while (port_id < RTE_MAX_ETHPORTS &&
+ (rte_eth_devices[port_id].state != RTE_ETH_DEV_ATTACHED ||
+ rte_eth_devices[port_id].data->owner.id != owner_id))
+ port_id++;
+
+ if (port_id >= RTE_MAX_ETHPORTS)
+ return RTE_MAX_ETHPORTS;
+
+ return port_id;
+}
+
+int
+rte_eth_dev_owner_new(uint16_t *owner_id)
+{
+ int ret = 0;
+
+ rte_spinlock_lock(rte_eth_dev_ownership_lock);
+
+ if (*rte_eth_next_owner_id == RTE_ETH_DEV_NO_OWNER) {
+ /* Counter wrap around. */
+ RTE_PMD_DEBUG_TRACE("Reached maximum number of Ethernet port owners.\n");
+ ret = -EUSERS;
+ } else {
+ *owner_id = (*rte_eth_next_owner_id)++;
+ }
+
+ rte_spinlock_unlock(rte_eth_dev_ownership_lock);
+ return ret;
+}
+
+int
+rte_eth_dev_owner_set(const uint16_t port_id,
+ const struct rte_eth_dev_owner *owner)
+{
+ struct rte_eth_dev_owner *port_owner;
+ int ret = 0;
+ int sret;
+
+ rte_spinlock_lock(rte_eth_dev_ownership_lock);
+
+ if (!rte_eth_dev_is_valid_port(port_id)) {
+ RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ ret = -ENODEV;
+ goto unlock;
+ }
+
+ if (!rte_eth_is_valid_owner_id(owner->id)) {
+ ret = -EINVAL;
+ goto unlock;
+ }
+
+ port_owner = &rte_eth_devices[port_id].data->owner;
+ if (port_owner->id != RTE_ETH_DEV_NO_OWNER &&
+ port_owner->id != owner->id) {
+ RTE_LOG(ERR, EAL,
+ "Cannot set owner to port %d already owned by %s_%05d.\n",
+ port_id, port_owner->name, port_owner->id);
+ ret = -EPERM;
+ goto unlock;
+ }
+
+ sret = snprintf(port_owner->name, RTE_ETH_MAX_OWNER_NAME_LEN, "%s",
+ owner->name);
+ if (sret < 0 || sret >= RTE_ETH_MAX_OWNER_NAME_LEN) {
+ memset(port_owner->name, 0, RTE_ETH_MAX_OWNER_NAME_LEN);
+ RTE_LOG(ERR, EAL, "Invalid owner name.\n");
+ ret = -EINVAL;
+ goto unlock;
+ }
+
+ port_owner->id = owner->id;
+ RTE_PMD_DEBUG_TRACE("Port %d owner is %s_%05d.\n", port_id,
+ owner->name, owner->id);
+
+unlock:
+ rte_spinlock_unlock(rte_eth_dev_ownership_lock);
+ return ret;
+}
+
+int
+rte_eth_dev_owner_unset(const uint16_t port_id, const uint16_t owner_id)
+{
+ struct rte_eth_dev_owner *port_owner;
+ int ret = 0;
+
+ rte_spinlock_lock(rte_eth_dev_ownership_lock);
+
+ if (!rte_eth_dev_is_valid_port(port_id)) {
+ RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ ret = -ENODEV;
+ goto unlock;
+ }
+
+ if (!rte_eth_is_valid_owner_id(owner_id)) {
+ ret = -EINVAL;
+ goto unlock;
+ }
+
+ port_owner = &rte_eth_devices[port_id].data->owner;
+ if (port_owner->id != owner_id) {
+ RTE_LOG(ERR, EAL, "Cannot unset port %d owner (%s_%05d) by"
+ " a different owner with id %5d.\n", port_id,
+ port_owner->name, port_owner->id, owner_id);
+ ret = -EPERM;
+ goto unlock;
+ }
+ RTE_PMD_DEBUG_TRACE("Port %d owner %s_%05d has removed.\n", port_id,
+ port_owner->name, port_owner->id);
+
+ memset(port_owner, 0, sizeof(struct rte_eth_dev_owner));
+
+unlock:
+ rte_spinlock_unlock(rte_eth_dev_ownership_lock);
+ return ret;
+}
+
+void
+rte_eth_dev_owner_delete(const uint16_t owner_id)
+{
+ uint16_t port_id;
+
+ rte_spinlock_lock(rte_eth_dev_ownership_lock);
+
+ if (rte_eth_is_valid_owner_id(owner_id)) {
+ RTE_ETH_FOREACH_DEV_OWNED_BY(port_id, owner_id)
+ memset(&rte_eth_devices[port_id].data->owner, 0,
+ sizeof(struct rte_eth_dev_owner));
+ RTE_PMD_DEBUG_TRACE("All port owners owned by %05d identifier"
+ " have removed.\n", owner_id);
+ }
+
+ rte_spinlock_unlock(rte_eth_dev_ownership_lock);
+}
+
+int
+rte_eth_dev_owner_get(const uint16_t port_id, struct rte_eth_dev_owner *owner)
+{
+ int ret = 0;
+
+ rte_spinlock_lock(rte_eth_dev_ownership_lock);
+
+ if (!rte_eth_dev_is_valid_port(port_id)) {
+ RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ ret = -ENODEV;
+ } else {
+ rte_memcpy(owner, &rte_eth_devices[port_id].data->owner,
+ sizeof(*owner));
+ }
+
+ rte_spinlock_unlock(rte_eth_dev_ownership_lock);
+ return ret;
+}
+
int
rte_eth_dev_socket_id(uint16_t port_id)
{
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 57b61ed..88ad765 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1760,6 +1760,15 @@ struct rte_eth_dev_sriov {
#define RTE_ETH_NAME_MAX_LEN RTE_DEV_NAME_MAX_LEN
+#define RTE_ETH_DEV_NO_OWNER 0
+
+#define RTE_ETH_MAX_OWNER_NAME_LEN 64
+
+struct rte_eth_dev_owner {
+ uint16_t id; /**< The owner unique identifier. */
+ char name[RTE_ETH_MAX_OWNER_NAME_LEN]; /**< The owner name. */
+};
+
/**
* @internal
* The data part, with no function pointers, associated with each ethernet device.
@@ -1810,6 +1819,7 @@ struct rte_eth_dev_data {
int numa_node; /**< NUMA node connection */
struct rte_vlan_filter_conf vlan_filter_conf;
/**< VLAN filter configuration. */
+ struct rte_eth_dev_owner owner; /**< The port owner. */
};
/** Device supports link state interrupt */
@@ -1846,6 +1856,85 @@ struct rte_eth_dev_data {
/**
+ * Iterates over valid ethdev ports owned by a specific owner.
+ *
+ * @param port_id
+ * The id of the next possible valid owned port.
+ * @param owner_id
+ * The owner identifier.
+ * RTE_ETH_DEV_NO_OWNER means iterate over all valid ownerless ports.
+ * @return
+ * Next valid port id owned by owner_id, RTE_MAX_ETHPORTS if there is none.
+ */
+uint16_t rte_eth_find_next_owned_by(uint16_t port_id, const uint16_t owner_id);
+
+/**
+ * Macro to iterate over all enabled ethdev ports owned by a specific owner.
+ */
+#define RTE_ETH_FOREACH_DEV_OWNED_BY(p, o) \
+ for (p = rte_eth_find_next_owned_by(0, o); \
+ (unsigned int)p < (unsigned int)RTE_MAX_ETHPORTS; \
+ p = rte_eth_find_next_owned_by(p + 1, o))
+
+/**
+ * Get a new unique owner identifier.
+ * An owner identifier is used to owns Ethernet devices by only one DPDK entity
+ * to avoid multiple management of device by different entities.
+ *
+ * @param owner_id
+ * Owner identifier pointer.
+ * @return
+ * Negative errno value on error, 0 on success.
+ */
+int rte_eth_dev_owner_new(uint16_t *owner_id);
+
+/**
+ * Set an Ethernet device owner.
+ *
+ * @param port_id
+ * The identifier of the port to own.
+ * @param owner
+ * The owner pointer.
+ * @return
+ * Negative errno value on error, 0 on success.
+ */
+int rte_eth_dev_owner_set(const uint16_t port_id,
+ const struct rte_eth_dev_owner *owner);
+
+/**
+ * Unset Ethernet device owner to make the device ownerless.
+ *
+ * @param port_id
+ * The identifier of port to make ownerless.
+ * @param owner
+ * The owner identifier.
+ * @return
+ * 0 on success, negative errno value on error.
+ */
+int rte_eth_dev_owner_unset(const uint16_t port_id, const uint16_t owner_id);
+
+/**
+ * Remove owner from all Ethernet devices owned by a specific owner.
+ *
+ * @param owner
+ * The owner identifier.
+ */
+void rte_eth_dev_owner_delete(const uint16_t owner_id);
+
+/**
+ * Get the owner of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier.
+ * @param owner
+ * The owner structure pointer to fill.
+ * @return
+ * 0 on success, negative errno value on error..
+ */
+int rte_eth_dev_owner_get(const uint16_t port_id,
+ struct rte_eth_dev_owner *owner);
+
+/**
* Get the total number of Ethernet devices that have been successfully
* initialized by the matching Ethernet driver during the PCI probing phase
* and that are available for applications to use. These devices must be
diff --git a/lib/librte_ether/rte_ethdev_version.map b/lib/librte_ether/rte_ethdev_version.map
index e9681ac..5d20b5f 100644
--- a/lib/librte_ether/rte_ethdev_version.map
+++ b/lib/librte_ether/rte_ethdev_version.map
@@ -198,6 +198,18 @@ DPDK_17.11 {
} DPDK_17.08;
+DPDK_18.02 {
+ global:
+
+ rte_eth_dev_owner_delete;
+ rte_eth_dev_owner_get;
+ rte_eth_dev_owner_new;
+ rte_eth_dev_owner_set;
+ rte_eth_dev_owner_unset;
+ rte_eth_find_next_owned_by;
+
+} DPDK_17.11;
+
EXPERIMENTAL {
global:
--
1.8.3.1
next prev parent reply other threads:[~2018-01-07 9:46 UTC|newest]
Thread overview: 212+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-28 11:57 [dpdk-dev] [PATCH 0/5] ethdev: Port ownership Matan Azrad
2017-11-28 11:57 ` [dpdk-dev] [PATCH 1/5] ethdev: free a port by a dedicated API Matan Azrad
2017-11-28 11:57 ` [dpdk-dev] [PATCH 2/5] ethdev: add port ownership Matan Azrad
2017-11-30 12:36 ` Neil Horman
2017-11-30 13:24 ` Gaëtan Rivet
2017-11-30 14:30 ` Matan Azrad
2017-11-30 15:09 ` Gaëtan Rivet
2017-11-30 15:43 ` Matan Azrad
2017-12-01 12:09 ` Neil Horman
2017-12-03 8:04 ` Matan Azrad
2017-12-03 11:10 ` Ananyev, Konstantin
2017-12-03 13:46 ` Matan Azrad
2017-12-04 16:01 ` Neil Horman
2017-12-04 18:10 ` Matan Azrad
2017-12-04 22:30 ` Neil Horman
2017-12-05 6:08 ` Matan Azrad
2017-12-05 10:05 ` Bruce Richardson
2017-12-08 11:35 ` Thomas Monjalon
2017-12-08 12:31 ` Neil Horman
2017-12-21 17:06 ` Thomas Monjalon
2017-12-21 17:43 ` Neil Horman
2017-12-21 19:37 ` Matan Azrad
2017-12-21 20:14 ` Neil Horman
2017-12-21 21:57 ` Matan Azrad
2017-12-22 14:26 ` Neil Horman
2017-12-23 22:36 ` Matan Azrad
2017-12-29 16:56 ` Neil Horman
2017-12-05 19:26 ` Neil Horman
2017-12-08 11:06 ` Thomas Monjalon
2017-12-05 11:12 ` Ananyev, Konstantin
2017-12-05 11:44 ` Ananyev, Konstantin
2017-12-05 11:53 ` Thomas Monjalon
2017-12-05 14:56 ` Bruce Richardson
2017-12-05 14:57 ` Ananyev, Konstantin
2017-12-05 11:47 ` Thomas Monjalon
2017-12-05 15:13 ` Ananyev, Konstantin
2017-12-05 15:49 ` Thomas Monjalon
2017-11-28 11:57 ` [dpdk-dev] [PATCH 3/5] net/failsafe: free an eth port by a dedicated API Matan Azrad
2017-11-28 11:58 ` [dpdk-dev] [PATCH 4/5] net/failsafe: use ownership mechanism to own ports Matan Azrad
2017-11-28 11:58 ` [dpdk-dev] [PATCH 5/5] app/testpmd: adjust ethdev port ownership Matan Azrad
2018-01-07 9:45 ` [dpdk-dev] [PATCH v2 0/6] ethdev: " Matan Azrad
2018-01-07 9:45 ` [dpdk-dev] [PATCH v2 1/6] ethdev: fix port data reset timing Matan Azrad
2018-01-07 9:45 ` Matan Azrad [this message]
2018-01-10 13:36 ` [dpdk-dev] [PATCH v2 2/6] ethdev: add port ownership Ananyev, Konstantin
2018-01-10 16:58 ` Matan Azrad
2018-01-11 12:40 ` Ananyev, Konstantin
2018-01-11 14:51 ` Matan Azrad
2018-01-12 0:02 ` Ananyev, Konstantin
2018-01-12 7:24 ` Matan Azrad
2018-01-15 11:45 ` Ananyev, Konstantin
2018-01-15 13:09 ` Matan Azrad
2018-01-15 18:43 ` Ananyev, Konstantin
2018-01-16 8:04 ` Matan Azrad
2018-01-16 19:11 ` Ananyev, Konstantin
2018-01-16 20:32 ` Matan Azrad
2018-01-17 11:24 ` Ananyev, Konstantin
2018-01-17 12:05 ` Matan Azrad
2018-01-17 12:54 ` Ananyev, Konstantin
2018-01-17 13:10 ` Matan Azrad
2018-01-17 16:52 ` Ananyev, Konstantin
2018-01-17 18:02 ` Matan Azrad
2018-01-17 20:34 ` Matan Azrad
2018-01-18 14:17 ` Ananyev, Konstantin
2018-01-18 14:26 ` Matan Azrad
2018-01-18 14:41 ` Ananyev, Konstantin
2018-01-18 14:45 ` Matan Azrad
2018-01-18 14:51 ` Ananyev, Konstantin
2018-01-18 15:00 ` Matan Azrad
2018-01-17 14:00 ` Neil Horman
2018-01-17 17:01 ` Ananyev, Konstantin
2018-01-18 13:10 ` Neil Horman
2018-01-18 14:00 ` Matan Azrad
2018-01-18 16:54 ` Neil Horman
2018-01-18 17:20 ` Matan Azrad
2018-01-18 18:41 ` Neil Horman
2018-01-18 20:21 ` Matan Azrad
2018-01-19 1:41 ` Neil Horman
2018-01-19 7:14 ` Matan Azrad
2018-01-19 9:30 ` Bruce Richardson
2018-01-19 10:44 ` Matan Azrad
2018-01-19 13:30 ` Neil Horman
2018-01-19 13:57 ` Matan Azrad
2018-01-19 14:13 ` Thomas Monjalon
2018-01-19 15:27 ` Neil Horman
2018-01-19 17:17 ` Thomas Monjalon
2018-01-19 17:43 ` Neil Horman
2018-01-19 18:12 ` Thomas Monjalon
2018-01-19 19:47 ` Neil Horman
2018-01-19 20:19 ` Thomas Monjalon
2018-01-19 22:52 ` Neil Horman
2018-01-20 3:38 ` Tuxdriver
2018-01-20 12:54 ` Ananyev, Konstantin
2018-01-20 14:02 ` Thomas Monjalon
2018-01-19 12:55 ` Neil Horman
2018-01-19 13:52 ` Neil Horman
2018-01-18 16:27 ` Neil Horman
2018-01-17 17:58 ` Matan Azrad
2018-01-18 13:20 ` Neil Horman
2018-01-18 14:52 ` Matan Azrad
2018-01-19 13:57 ` Neil Horman
2018-01-19 14:07 ` Thomas Monjalon
2018-01-19 14:32 ` Neil Horman
2018-01-19 17:09 ` Thomas Monjalon
2018-01-19 17:37 ` Neil Horman
2018-01-19 18:10 ` Thomas Monjalon
2018-01-21 22:12 ` Ferruh Yigit
2018-01-07 9:45 ` [dpdk-dev] [PATCH v2 3/6] ethdev: synchronize port allocation Matan Azrad
2018-01-07 9:58 ` Matan Azrad
2018-01-07 9:45 ` [dpdk-dev] [PATCH v2 4/6] net/failsafe: free an eth port by a dedicated API Matan Azrad
2018-01-07 9:45 ` [dpdk-dev] [PATCH v2 5/6] net/failsafe: use ownership mechanism to own ports Matan Azrad
2018-01-08 10:32 ` Gaëtan Rivet
2018-01-08 11:16 ` Matan Azrad
2018-01-08 11:35 ` Gaëtan Rivet
2018-01-07 9:45 ` [dpdk-dev] [PATCH v2 6/6] app/testpmd: adjust ethdev port ownership Matan Azrad
2018-01-08 11:39 ` Gaëtan Rivet
2018-01-08 12:30 ` Matan Azrad
2018-01-08 13:30 ` Gaëtan Rivet
2018-01-08 13:55 ` Matan Azrad
2018-01-08 14:21 ` Gaëtan Rivet
2018-01-08 14:42 ` Matan Azrad
2018-01-16 5:53 ` Lu, Wenzhuo
2018-01-16 8:15 ` Matan Azrad
2018-01-17 0:46 ` Lu, Wenzhuo
2018-01-17 8:51 ` Matan Azrad
2018-01-18 0:53 ` Lu, Wenzhuo
2018-01-18 16:35 ` [dpdk-dev] [PATCH v3 0/7] Port ownership and syncronization Matan Azrad
2018-01-18 16:35 ` [dpdk-dev] [PATCH v3 1/7] ethdev: fix port data reset timing Matan Azrad
2018-01-18 17:00 ` Thomas Monjalon
2018-01-19 12:38 ` Ananyev, Konstantin
2018-03-05 11:24 ` [dpdk-dev] [dpdk-stable] " Ferruh Yigit
2018-03-05 14:52 ` Matan Azrad
2018-03-05 15:06 ` Ferruh Yigit
2018-03-05 15:12 ` Matan Azrad
2018-03-27 22:37 ` Ferruh Yigit
2018-03-28 12:07 ` Matan Azrad
2018-03-30 10:39 ` Ferruh Yigit
2018-04-19 11:07 ` Ferruh Yigit
2018-04-25 12:16 ` Matan Azrad
2018-04-25 12:30 ` Ori Kam
2018-04-25 12:54 ` Ferruh Yigit
2018-04-25 14:01 ` Matan Azrad
2018-01-18 16:35 ` [dpdk-dev] [PATCH v3 2/7] ethdev: fix used portid allocation Matan Azrad
2018-01-18 17:00 ` Thomas Monjalon
2018-01-19 12:40 ` Ananyev, Konstantin
2018-01-20 16:48 ` Matan Azrad
2018-01-20 17:26 ` Ananyev, Konstantin
2018-01-18 16:35 ` [dpdk-dev] [PATCH v3 3/7] ethdev: add port ownership Matan Azrad
2018-01-18 21:11 ` Thomas Monjalon
2018-01-19 12:41 ` Ananyev, Konstantin
2018-01-18 16:35 ` [dpdk-dev] [PATCH v3 4/7] ethdev: synchronize port allocation Matan Azrad
2018-01-18 20:43 ` Thomas Monjalon
2018-01-18 20:52 ` Matan Azrad
2018-01-18 21:17 ` Thomas Monjalon
2018-01-19 12:47 ` Ananyev, Konstantin
2018-01-18 16:35 ` [dpdk-dev] [PATCH v3 5/7] net/failsafe: free an eth port by a dedicated API Matan Azrad
2018-01-18 16:35 ` [dpdk-dev] [PATCH v3 6/7] net/failsafe: use ownership mechanism to own ports Matan Azrad
2018-01-18 16:35 ` [dpdk-dev] [PATCH v3 7/7] app/testpmd: adjust ethdev port ownership Matan Azrad
2018-01-19 12:37 ` Ananyev, Konstantin
2018-01-19 12:51 ` Matan Azrad
2018-01-19 13:08 ` Ananyev, Konstantin
2018-01-19 13:35 ` Matan Azrad
2018-01-19 15:00 ` Gaëtan Rivet
2018-01-20 18:14 ` Matan Azrad
2018-01-22 10:17 ` Gaëtan Rivet
2018-01-22 11:22 ` Matan Azrad
2018-01-22 12:28 ` Ananyev, Konstantin
2018-01-22 13:22 ` Matan Azrad
2018-01-22 20:48 ` Ananyev, Konstantin
2018-01-23 8:54 ` Matan Azrad
2018-01-23 12:56 ` Gaëtan Rivet
2018-01-23 14:30 ` Matan Azrad
2018-01-25 9:36 ` Matan Azrad
2018-01-25 10:05 ` Thomas Monjalon
2018-01-25 11:15 ` Ananyev, Konstantin
2018-01-25 11:33 ` Thomas Monjalon
2018-01-25 11:55 ` Ananyev, Konstantin
2018-01-23 13:34 ` Ananyev, Konstantin
2018-01-23 14:18 ` Thomas Monjalon
2018-01-23 15:12 ` Ananyev, Konstantin
2018-01-23 15:18 ` Ananyev, Konstantin
2018-01-23 17:33 ` Thomas Monjalon
2018-01-23 21:18 ` Ananyev, Konstantin
2018-01-24 8:10 ` Thomas Monjalon
2018-01-24 18:30 ` Ananyev, Konstantin
2018-01-25 10:55 ` Thomas Monjalon
2018-01-25 11:09 ` Ananyev, Konstantin
2018-01-25 11:27 ` Thomas Monjalon
2018-01-23 14:43 ` Matan Azrad
2018-01-20 21:24 ` [dpdk-dev] [PATCH v4 0/7] Port ownership and syncronization Matan Azrad
2018-01-20 21:24 ` [dpdk-dev] [PATCH v4 1/7] ethdev: fix port data reset timing Matan Azrad
2018-01-20 21:24 ` [dpdk-dev] [PATCH v4 2/7] ethdev: fix used portid allocation Matan Azrad
2018-01-20 21:24 ` [dpdk-dev] [PATCH v4 3/7] ethdev: add port ownership Matan Azrad
2018-01-21 20:43 ` Ferruh Yigit
2018-01-21 20:46 ` Ferruh Yigit
2018-01-20 21:24 ` [dpdk-dev] [PATCH v4 4/7] ethdev: synchronize port allocation Matan Azrad
2018-01-20 21:24 ` [dpdk-dev] [PATCH v4 5/7] net/failsafe: free an eth port by a dedicated API Matan Azrad
2018-01-20 21:24 ` [dpdk-dev] [PATCH v4 6/7] net/failsafe: use ownership mechanism to own ports Matan Azrad
2018-01-20 21:24 ` [dpdk-dev] [PATCH v4 7/7] app/testpmd: adjust ethdev port ownership Matan Azrad
2018-01-22 16:38 ` [dpdk-dev] [PATCH v5 0/7] Port ownership and synchronization Matan Azrad
2018-01-22 16:38 ` [dpdk-dev] [PATCH v5 1/7] ethdev: fix port data reset timing Matan Azrad
2018-01-22 16:38 ` [dpdk-dev] [PATCH v5 2/7] ethdev: fix used portid allocation Matan Azrad
2018-01-22 16:38 ` [dpdk-dev] [PATCH v5 3/7] ethdev: add port ownership Matan Azrad
2018-01-22 16:38 ` [dpdk-dev] [PATCH v5 4/7] ethdev: synchronize port allocation Matan Azrad
2018-01-22 16:38 ` [dpdk-dev] [PATCH v5 5/7] net/failsafe: free an eth port by a dedicated API Matan Azrad
2018-01-22 16:38 ` [dpdk-dev] [PATCH v5 6/7] net/failsafe: use ownership mechanism to own ports Matan Azrad
2018-01-22 16:38 ` [dpdk-dev] [PATCH v5 7/7] app/testpmd: adjust ethdev port ownership Matan Azrad
2018-01-25 1:47 ` Lu, Wenzhuo
2018-01-25 8:30 ` Matan Azrad
2018-01-26 0:50 ` Lu, Wenzhuo
2018-01-29 11:21 ` [dpdk-dev] [PATCH v5 0/7] Port ownership and synchronization Matan Azrad
2018-01-31 19:53 ` Thomas Monjalon
2018-01-25 14:35 ` [dpdk-dev] [PATCH v3 0/7] Port ownership and syncronization Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1515318351-4756-3-git-send-email-matan@mellanox.com \
--to=matan@mellanox.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=gaetan.rivet@6wind.com \
--cc=jingjing.wu@intel.com \
--cc=konstantin.ananyev@intel.com \
--cc=nhorman@tuxdriver.com \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).