DPDK patches and discussions
 help / color / mirror / Atom feed
From: Andrew Rybchenko <arybchenko@solarflare.com>
To: <dev@dpdk.org>
Cc: Ferruh Yigit <ferruh.yigit@intel.com>,
	Ivan Malov <ivan.malov@oktetlabs.ru>
Subject: [dpdk-dev] [PATCH v3 6/6] net/sfc: add dynamic log level for MCDI messages
Date: Wed, 21 Mar 2018 11:28:21 +0000	[thread overview]
Message-ID: <1521631701-11282-7-git-send-email-arybchenko@solarflare.com> (raw)
In-Reply-To: <1521631701-11282-1-git-send-email-arybchenko@solarflare.com>

From: Ivan Malov <ivan.malov@oktetlabs.ru>

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
---
 doc/guides/nics/sfc_efx.rst  | 12 ++++++------
 drivers/net/sfc/sfc.h        |  2 +-
 drivers/net/sfc/sfc_ethdev.c |  3 +--
 drivers/net/sfc/sfc_kvargs.c |  1 -
 drivers/net/sfc/sfc_kvargs.h |  2 --
 drivers/net/sfc/sfc_log.h    | 15 +++++++++++++++
 drivers/net/sfc/sfc_mcdi.c   | 25 +++++++++++++------------
 7 files changed, 36 insertions(+), 24 deletions(-)

diff --git a/doc/guides/nics/sfc_efx.rst b/doc/guides/nics/sfc_efx.rst
index c0b52d3..2e4c3d8 100644
--- a/doc/guides/nics/sfc_efx.rst
+++ b/doc/guides/nics/sfc_efx.rst
@@ -321,12 +321,6 @@ boolean parameters value.
   **auto** allows NIC firmware to make a choice based on
   installed licences and firmware variant configured using **sfboot**.
 
-- ``mcdi_logging`` [bool] (default **n**)
-
-  Enable extra logging of the communication with the NIC's management CPU.
-  The logging is done using RTE_LOG() with INFO level and PMD type.
-  The format is consumed by the Solarflare netlogdecode cross-platform tool.
-
 - ``stats_update_period_ms`` [long] (default **1000**)
 
   Adjust period in milliseconds to update port hardware statistics.
@@ -360,3 +354,9 @@ SFC EFX PMD provides the following log types available for control:
   Matches a subset of per-port log types registered during runtime.
   A full name for a particular type may be obtained by appending a
   dot and a PCI device identifier (``XXXX:XX:XX.X``) to the prefix.
+
+- ``pmd.net.sfc.mcdi`` (default level is **6** - ``RTE_LOG_NOTICE``)
+
+  Extra logging of the communication with the NIC's management CPU.
+  The format of the log is consumed by the Solarflare netlogdecode
+  cross-platform tool. May be managed per-port, as explained above.
diff --git a/drivers/net/sfc/sfc.h b/drivers/net/sfc/sfc.h
index 378c675..65a4df2 100644
--- a/drivers/net/sfc/sfc.h
+++ b/drivers/net/sfc/sfc.h
@@ -104,7 +104,7 @@ struct sfc_mcdi {
 	efsys_mem_t			mem;
 	enum sfc_mcdi_state		state;
 	efx_mcdi_transport_t		transport;
-	bool				logging;
+	uint32_t			logtype;
 	uint32_t			proxy_handle;
 	efx_rc_t			proxy_result;
 };
diff --git a/drivers/net/sfc/sfc_ethdev.c b/drivers/net/sfc/sfc_ethdev.c
index ebd0a23..f16d520 100644
--- a/drivers/net/sfc/sfc_ethdev.c
+++ b/drivers/net/sfc/sfc_ethdev.c
@@ -2065,8 +2065,7 @@ RTE_PMD_REGISTER_PARAM_STRING(net_sfc_efx,
 	SFC_KVARG_RX_DATAPATH "=" SFC_KVARG_VALUES_RX_DATAPATH " "
 	SFC_KVARG_TX_DATAPATH "=" SFC_KVARG_VALUES_TX_DATAPATH " "
 	SFC_KVARG_PERF_PROFILE "=" SFC_KVARG_VALUES_PERF_PROFILE " "
-	SFC_KVARG_STATS_UPDATE_PERIOD_MS "=<long> "
-	SFC_KVARG_MCDI_LOGGING "=" SFC_KVARG_VALUES_BOOL);
+	SFC_KVARG_STATS_UPDATE_PERIOD_MS "=<long>");
 
 RTE_INIT(sfc_driver_register_logtype);
 static void
diff --git a/drivers/net/sfc/sfc_kvargs.c b/drivers/net/sfc/sfc_kvargs.c
index 860adeb..9c08bff 100644
--- a/drivers/net/sfc/sfc_kvargs.c
+++ b/drivers/net/sfc/sfc_kvargs.c
@@ -23,7 +23,6 @@ sfc_kvargs_parse(struct sfc_adapter *sa)
 	struct rte_devargs *devargs = eth_dev->device->devargs;
 	const char **params = (const char *[]){
 		SFC_KVARG_STATS_UPDATE_PERIOD_MS,
-		SFC_KVARG_MCDI_LOGGING,
 		SFC_KVARG_PERF_PROFILE,
 		SFC_KVARG_RX_DATAPATH,
 		SFC_KVARG_TX_DATAPATH,
diff --git a/drivers/net/sfc/sfc_kvargs.h b/drivers/net/sfc/sfc_kvargs.h
index 2c7aaaf..a84dc6b 100644
--- a/drivers/net/sfc/sfc_kvargs.h
+++ b/drivers/net/sfc/sfc_kvargs.h
@@ -18,8 +18,6 @@ extern "C" {
 
 #define SFC_KVARG_VALUES_BOOL		"[1|y|yes|on|0|n|no|off]"
 
-#define SFC_KVARG_MCDI_LOGGING		"mcdi_logging"
-
 #define SFC_KVARG_PERF_PROFILE		"perf_profile"
 
 #define SFC_KVARG_PERF_PROFILE_AUTO		"auto"
diff --git a/drivers/net/sfc/sfc_log.h b/drivers/net/sfc/sfc_log.h
index 6daab1c..d6f3435 100644
--- a/drivers/net/sfc/sfc_log.h
+++ b/drivers/net/sfc/sfc_log.h
@@ -25,6 +25,12 @@ extern uint32_t sfc_logtype_driver;
 /** Name prefix for the per-device log type used to report basic information */
 #define SFC_LOGTYPE_MAIN_STR	SFC_LOGTYPE_PREFIX "main"
 
+/** Device MCDI log type name prefix */
+#define SFC_LOGTYPE_MCDI_STR	SFC_LOGTYPE_PREFIX "mcdi"
+
+/** Level value used by MCDI log statements */
+#define SFC_LOG_LEVEL_MCDI	RTE_LOG_INFO
+
 /* Log PMD message, automatically add prefix and \n */
 #define SFC_LOG(sa, level, type, ...) \
 	do {								\
@@ -84,4 +90,13 @@ extern uint32_t sfc_logtype_driver;
 				RTE_FMT_TAIL(__VA_ARGS__ ,)));		\
 	} while (0)
 
+#define sfc_log_mcdi(sa, ...) \
+	do {								\
+		const struct sfc_adapter *_sa = (sa);			\
+									\
+		SFC_LOG(_sa, SFC_LOG_LEVEL_MCDI, _sa->mcdi.logtype,	\
+			__VA_ARGS__);					\
+	} while (0)
+
+
 #endif /* _SFC_LOG_H_ */
diff --git a/drivers/net/sfc/sfc_mcdi.c b/drivers/net/sfc/sfc_mcdi.c
index 895c2f5..007506b 100644
--- a/drivers/net/sfc/sfc_mcdi.c
+++ b/drivers/net/sfc/sfc_mcdi.c
@@ -15,7 +15,6 @@
 
 #include "sfc.h"
 #include "sfc_log.h"
-#include "sfc_kvargs.h"
 #include "sfc_ev.h"
 
 #define SFC_MCDI_POLL_INTERVAL_MIN_US	10		/* 10us in 1us units */
@@ -176,7 +175,7 @@ sfc_mcdi_do_log(const struct sfc_adapter *sa,
 			 * at the end which is required by netlogdecode.
 			 */
 			buffer[position] = '\0';
-			sfc_notice(sa, "%s \\", buffer);
+			sfc_log_mcdi(sa, "%s \\", buffer);
 			/* Preserve prefix for the next log message */
 			position = pfxsize;
 		}
@@ -198,10 +197,17 @@ sfc_mcdi_logger(void *arg, efx_log_msg_t type,
 	size_t pfxsize;
 	size_t start;
 
-	if (!sa->mcdi.logging)
+	/*
+	 * Unlike the other cases, MCDI logging implies more onerous work
+	 * needed to produce a message. If the dynamic log level prevents
+	 * the end result from being printed, the CPU time will be wasted.
+	 *
+	 * To avoid wasting time, the actual level is examined in advance.
+	 */
+	if (rte_log_get_level(sa->mcdi.logtype) < (int)SFC_LOG_LEVEL_MCDI)
 		return;
 
-	/* The format including prefix added by sfc_notice() is the format
+	/* The format including prefix added by sfc_log_mcdi() is the format
 	 * consumed by the Solarflare netlogdecode tool.
 	 */
 	pfxsize = snprintf(buffer, sizeof(buffer), "MCDI RPC %s:",
@@ -212,7 +218,7 @@ sfc_mcdi_logger(void *arg, efx_log_msg_t type,
 	start = sfc_mcdi_do_log(sa, buffer, data, data_size, pfxsize, start);
 	if (start != pfxsize) {
 		buffer[start] = '\0';
-		sfc_notice(sa, "%s", buffer);
+		sfc_log_mcdi(sa, "%s", buffer);
 	}
 }
 
@@ -250,11 +256,8 @@ sfc_mcdi_init(struct sfc_adapter *sa)
 	if (rc != 0)
 		goto fail_dma_alloc;
 
-	/* Convert negative error to positive used in the driver */
-	rc = sfc_kvargs_process(sa, SFC_KVARG_MCDI_LOGGING,
-				sfc_kvarg_bool_handler, &mcdi->logging);
-	if (rc != 0)
-		goto fail_kvargs_process;
+	mcdi->logtype = sfc_register_logtype(sa, SFC_LOGTYPE_MCDI_STR,
+					     RTE_LOG_NOTICE);
 
 	emtp = &mcdi->transport;
 	emtp->emt_context = sa;
@@ -274,8 +277,6 @@ sfc_mcdi_init(struct sfc_adapter *sa)
 
 fail_mcdi_init:
 	memset(emtp, 0, sizeof(*emtp));
-
-fail_kvargs_process:
 	sfc_dma_free(sa, &mcdi->mem);
 
 fail_dma_alloc:
-- 
2.7.4

  parent reply	other threads:[~2018-03-21 11:28 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-25 17:00 [dpdk-dev] [PATCH 0/6] net/sfc: implement dynamic logging Andrew Rybchenko
2018-01-25 17:00 ` [dpdk-dev] [PATCH 1/6] eal: register log type and pick level from EAL args Andrew Rybchenko
2018-01-25 17:00 ` [dpdk-dev] [PATCH 2/6] net/sfc: add support for driver-wide dynamic logging Andrew Rybchenko
2018-01-25 18:42   ` Stephen Hemminger
2018-01-26  6:51     ` Andrew Rybchenko
2018-03-05 14:59   ` Ferruh Yigit
2018-03-06 14:45     ` Andrew Rybchenko
2018-03-06 14:56       ` Andrew Rybchenko
2018-03-06 15:26         ` Ferruh Yigit
2018-01-25 17:00 ` [dpdk-dev] [PATCH 3/6] net/sfc: add support for per-port " Andrew Rybchenko
2018-03-15 15:45   ` Ferruh Yigit
2018-01-25 17:00 ` [dpdk-dev] [PATCH 4/6] net/sfc: prepare to merge init logs with main log type Andrew Rybchenko
2018-01-25 17:00 ` [dpdk-dev] [PATCH 5/6] net/sfc: remove dedicated init log parameter Andrew Rybchenko
2018-01-25 17:00 ` [dpdk-dev] [PATCH 6/6] net/sfc: add dynamic log level for MCDI messages Andrew Rybchenko
2018-01-25 21:38 ` [dpdk-dev] [PATCH 0/6] net/sfc: implement dynamic logging Thomas Monjalon
2018-01-26  5:59   ` Andrew Rybchenko
2018-01-26  7:44     ` Thomas Monjalon
2018-02-15 11:35 ` [dpdk-dev] [PATCH v2] eal: register log type and pick level from EAL args Andrew Rybchenko
2018-03-05 15:00 ` [dpdk-dev] [PATCH 0/6] net/sfc: implement dynamic logging Ferruh Yigit
2018-03-21 11:28 ` [dpdk-dev] [PATCH v3 " Andrew Rybchenko
2018-03-21 11:28   ` [dpdk-dev] [PATCH v3 1/6] eal: register log type and pick level from EAL args Andrew Rybchenko
2018-03-22 10:21     ` Ferruh Yigit
2018-03-21 11:28   ` [dpdk-dev] [PATCH v3 2/6] net/sfc: add support for driver-wide dynamic logging Andrew Rybchenko
2018-03-21 11:28   ` [dpdk-dev] [PATCH v3 3/6] net/sfc: add support for per-port " Andrew Rybchenko
2018-03-21 11:28   ` [dpdk-dev] [PATCH v3 4/6] net/sfc: prepare to merge init logs with main log type Andrew Rybchenko
2018-03-21 11:28   ` [dpdk-dev] [PATCH v3 5/6] net/sfc: remove dedicated init log parameter Andrew Rybchenko
2018-03-21 11:28   ` Andrew Rybchenko [this message]
2018-03-22 10:22   ` [dpdk-dev] [PATCH v3 0/6] net/sfc: implement dynamic logging Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1521631701-11282-7-git-send-email-arybchenko@solarflare.com \
    --to=arybchenko@solarflare.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=ivan.malov@oktetlabs.ru \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).