DPDK patches and discussions
 help / color / mirror / Atom feed
From: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
To: pablo.de.lara.guarch@intel.com, dev@dpdk.org,
	fiona.trahe@intel.com, tomaszx.jozwiak@intel.com
Subject: [dpdk-dev] [PATCH 2/2] common/qat: fix offset greater than first sgl segment
Date: Thu,  2 Aug 2018 17:09:26 +0200	[thread overview]
Message-ID: <1533222566-17685-3-git-send-email-tomaszx.jozwiak@intel.com> (raw)
In-Reply-To: <1533222566-17685-1-git-send-email-tomaszx.jozwiak@intel.com>

This patch fixes sgl filling to handle offset
greater than first sgl segment

Fixes: 1947bd18580b ("compress/qat: support scatter-gather buffers")

Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
---
 drivers/common/qat/qat_common.c | 77 +++++++++++++++++------------------------
 drivers/common/qat/qat_common.h |  2 +-
 drivers/compress/qat/qat_comp.c | 11 +++---
 drivers/crypto/qat/qat_sym.c    | 18 +++++-----
 4 files changed, 48 insertions(+), 60 deletions(-)

diff --git a/drivers/common/qat/qat_common.c b/drivers/common/qat/qat_common.c
index bc04c07..4753866 100644
--- a/drivers/common/qat/qat_common.c
+++ b/drivers/common/qat/qat_common.c
@@ -7,79 +7,66 @@
 #include "qat_logs.h"
 
 int
-qat_sgl_fill_array(struct rte_mbuf *buf, uint64_t buf_start,
+qat_sgl_fill_array(struct rte_mbuf *buf, int64_t offset,
 		void *list_in, uint32_t data_len,
 		const uint16_t max_segs)
 {
-	int nr = 1;
+	int res = -EINVAL;
+	uint32_t buf_len, nr;
 	struct qat_sgl *list = (struct qat_sgl *)list_in;
-	/* buf_start allows the first buffer to start at an address before or
-	 * after the mbuf data start. It's used to either optimally align the
-	 * dma to 64 or to start dma from an offset.
-	 */
-	uint32_t buf_len;
-	uint32_t first_buf_len = rte_pktmbuf_data_len(buf) +
-			(rte_pktmbuf_mtophys(buf) - buf_start);
 #if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
 	uint8_t *virt_addr[max_segs];
-	virt_addr[0] = rte_pktmbuf_mtod(buf, uint8_t*) +
-			(rte_pktmbuf_mtophys(buf) - buf_start);
 #endif
 
-	list->buffers[0].addr = buf_start;
-	list->buffers[0].resrvd = 0;
-	list->buffers[0].len = first_buf_len;
-
-	if (data_len <= first_buf_len) {
-		list->num_bufs = nr;
-		list->buffers[0].len = data_len;
-		goto sgl_end;
-	}
-
-	buf = buf->next;
-	buf_len = first_buf_len;
-	while (buf) {
-		if (unlikely(nr == max_segs)) {
-			QAT_DP_LOG(ERR, "Exceeded max segments in QAT SGL (%u)",
-					max_segs);
-			return -EINVAL;
+	for (nr = buf_len = 0; buf &&  nr < max_segs; buf = buf->next)  {
+		if (offset >= rte_pktmbuf_data_len(buf)) {
+			offset -= rte_pktmbuf_data_len(buf);
+			continue;
 		}
 
-		list->buffers[nr].len = rte_pktmbuf_data_len(buf);
+		list->buffers[nr].len = rte_pktmbuf_data_len(buf) - offset;
 		list->buffers[nr].resrvd = 0;
-		list->buffers[nr].addr = rte_pktmbuf_mtophys(buf);
+		list->buffers[nr].addr = rte_pktmbuf_iova_offset(buf, offset);
+
 #if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
-		virt_addr[nr] = rte_pktmbuf_mtod(buf, uint8_t*);
+		virt_addr[nr] = rte_pktmbuf_mtod_offset(buf, uint8_t*, offset);
 #endif
+		offset = 0;
 		buf_len += list->buffers[nr].len;
-		buf = buf->next;
 
 		if (buf_len >= data_len) {
-			list->buffers[nr].len -=
-				buf_len - data_len;
-			buf = NULL;
+			list->buffers[nr].len -= buf_len - data_len;
+			res = 0;
+			break;
 		}
 		++nr;
 	}
-	list->num_bufs = nr;
 
-sgl_end:
+	if (unlikely(res != 0)) {
+		if (nr == max_segs) {
+			QAT_DP_LOG(ERR, "Exceeded max segments in QAT SGL (%u)",
+				   max_segs);
+		} else {
+			QAT_DP_LOG(ERR, "Mbuf chain is too short");
+		}
+	} else {
+
+		list->num_bufs = ++nr;
 #if RTE_LOG_DP_LEVEL >= RTE_LOG_DEBUG
-	{
-		uint16_t i;
 		QAT_DP_LOG(INFO, "SGL with %d buffers:", list->num_bufs);
-		for (i = 0; i < list->num_bufs; i++) {
+		for (nr = 0; nr < list->num_bufs; nr++) {
 			QAT_DP_LOG(INFO,
 				"QAT SGL buf %d, len = %d, iova = 0x%012"PRIx64,
-				i, list->buffers[i].len,
-				list->buffers[i].addr);
+				 nr, list->buffers[nr].len,
+				 list->buffers[nr].addr);
 			QAT_DP_HEXDUMP_LOG(DEBUG, "qat SGL",
-					virt_addr[i], list->buffers[i].len);
+					   virt_addr[nr],
+					   list->buffers[nr].len);
 		}
-	}
 #endif
+	}
 
-	return 0;
+	return res;
 }
 
 void qat_stats_get(struct qat_pci_device *dev,
diff --git a/drivers/common/qat/qat_common.h b/drivers/common/qat/qat_common.h
index b26aa26..d4bef53 100644
--- a/drivers/common/qat/qat_common.h
+++ b/drivers/common/qat/qat_common.h
@@ -65,7 +65,7 @@ struct qat_common_stats {
 struct qat_pci_device;
 
 int
-qat_sgl_fill_array(struct rte_mbuf *buf, uint64_t buf_start,
+qat_sgl_fill_array(struct rte_mbuf *buf, int64_t offset,
 		void *list_in, uint32_t data_len,
 		const uint16_t max_segs);
 void
diff --git a/drivers/compress/qat/qat_comp.c b/drivers/compress/qat/qat_comp.c
index 522edfc..38c8a5b 100644
--- a/drivers/compress/qat/qat_comp.c
+++ b/drivers/compress/qat/qat_comp.c
@@ -53,25 +53,24 @@ qat_comp_build_request(void *in_op, uint8_t *out_msg,
 
 		ICP_QAT_FW_COMN_PTR_TYPE_SET(comp_req->comn_hdr.comn_req_flags,
 				QAT_COMN_PTR_TYPE_SGL);
+
 		ret = qat_sgl_fill_array(op->m_src,
-				rte_pktmbuf_mtophys_offset(op->m_src,
-							op->src.offset),
+				op->src.offset,
 				&cookie->qat_sgl_src,
 				op->src.length,
 				RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS);
 		if (ret) {
-			QAT_DP_LOG(ERR, "QAT PMD Cannot fill sgl array");
+			QAT_DP_LOG(ERR, "QAT PMD Cannot fill source sgl array");
 			return ret;
 		}
 
 		ret = qat_sgl_fill_array(op->m_dst,
-				rte_pktmbuf_mtophys_offset(op->m_dst,
-							op->dst.offset),
+				op->dst.offset,
 				&cookie->qat_sgl_dst,
 				comp_req->comp_pars.out_buffer_sz,
 				RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS);
 		if (ret) {
-			QAT_DP_LOG(ERR, "QAT PMD Cannot fill sgl array");
+			QAT_DP_LOG(ERR, "QAT PMD Cannot fill dest. sgl array");
 			return ret;
 		}
 
diff --git a/drivers/crypto/qat/qat_sym.c b/drivers/crypto/qat/qat_sym.c
index 8273968..10cdf2e 100644
--- a/drivers/crypto/qat/qat_sym.c
+++ b/drivers/crypto/qat/qat_sym.c
@@ -494,10 +494,11 @@ qat_sym_build_request(void *in_op, uint8_t *out_msg,
 
 		ICP_QAT_FW_COMN_PTR_TYPE_SET(qat_req->comn_hdr.comn_req_flags,
 				QAT_COMN_PTR_TYPE_SGL);
-		ret = qat_sgl_fill_array(op->sym->m_src, src_buf_start,
-					&cookie->qat_sgl_src,
-					qat_req->comn_mid.src_length,
-					QAT_SYM_SGL_MAX_NUMBER);
+		ret = qat_sgl_fill_array(op->sym->m_src,
+		   (int64_t)(src_buf_start - rte_pktmbuf_iova(op->sym->m_src)),
+		   &cookie->qat_sgl_src,
+		   qat_req->comn_mid.src_length,
+		   QAT_SYM_SGL_MAX_NUMBER);
 
 		if (unlikely(ret)) {
 			QAT_DP_LOG(ERR, "QAT PMD Cannot fill sgl array");
@@ -510,10 +511,11 @@ qat_sym_build_request(void *in_op, uint8_t *out_msg,
 				cookie->qat_sgl_src_phys_addr;
 		else {
 			ret = qat_sgl_fill_array(op->sym->m_dst,
-						 dst_buf_start,
-						 &cookie->qat_sgl_dst,
-						 qat_req->comn_mid.dst_length,
-						 QAT_SYM_SGL_MAX_NUMBER);
+				(int64_t)(dst_buf_start -
+					  rte_pktmbuf_iova(op->sym->m_dst)),
+				 &cookie->qat_sgl_dst,
+				 qat_req->comn_mid.dst_length,
+				 QAT_SYM_SGL_MAX_NUMBER);
 
 			if (unlikely(ret)) {
 				QAT_DP_LOG(ERR, "QAT PMD can't fill sgl array");
-- 
2.7.4

  parent reply	other threads:[~2018-08-02 15:09 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-02 15:09 [dpdk-dev] [PATCH 0/2] common/qat: handle " Tomasz Jozwiak
2018-08-02 15:09 ` [dpdk-dev] [PATCH 1/2] compress/qat: fix buffer lengths in offset case Tomasz Jozwiak
2018-08-02 15:09 ` Tomasz Jozwiak [this message]
2018-08-03 10:38 ` [dpdk-dev] [PATCH 0/2] common/qat: handle offset greater than first sgl segment De Lara Guarch, Pablo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1533222566-17685-3-git-send-email-tomaszx.jozwiak@intel.com \
    --to=tomaszx.jozwiak@intel.com \
    --cc=dev@dpdk.org \
    --cc=fiona.trahe@intel.com \
    --cc=pablo.de.lara.guarch@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).