From: Dekel Peled <dekelp@mellanox.com>
To: yskoh@mellanox.com, shahafs@mellanox.com
Cc: dev@dpdk.org, orika@mellanox.com
Subject: [dpdk-dev] [PATCH v8 6/7] net/mlx5: add raw data encap decap to Direct Verbs
Date: Thu, 1 Nov 2018 11:37:32 +0200 [thread overview]
Message-ID: <1541065053-28436-7-git-send-email-dekelp@mellanox.com> (raw)
In-Reply-To: <1540969847-48919-1-git-send-email-dekelp@mellanox.com>
This patch implements the encap and decap actions, using raw data,
in DV flow for MLX5 PMD.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
---
drivers/net/mlx5/mlx5_flow.h | 12 +-
drivers/net/mlx5/mlx5_flow_dv.c | 246 +++++++++++++++++++++++++++++++++++++---
2 files changed, 241 insertions(+), 17 deletions(-)
diff --git a/drivers/net/mlx5/mlx5_flow.h b/drivers/net/mlx5/mlx5_flow.h
index 104a1e6..908123f 100644
--- a/drivers/net/mlx5/mlx5_flow.h
+++ b/drivers/net/mlx5/mlx5_flow.h
@@ -96,15 +96,19 @@
#define MLX5_FLOW_ACTION_VXLAN_DECAP (1u << 23)
#define MLX5_FLOW_ACTION_NVGRE_ENCAP (1u << 24)
#define MLX5_FLOW_ACTION_NVGRE_DECAP (1u << 25)
+#define MLX5_FLOW_ACTION_RAW_ENCAP (1u << 26)
+#define MLX5_FLOW_ACTION_RAW_DECAP (1u << 27)
#define MLX5_FLOW_FATE_ACTIONS \
(MLX5_FLOW_ACTION_DROP | MLX5_FLOW_ACTION_QUEUE | MLX5_FLOW_ACTION_RSS)
-#define MLX5_FLOW_ENCAP_ACTIONS \
- (MLX5_FLOW_ACTION_VXLAN_ENCAP | MLX5_FLOW_ACTION_NVGRE_ENCAP)
+#define MLX5_FLOW_ENCAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_ENCAP | \
+ MLX5_FLOW_ACTION_NVGRE_ENCAP | \
+ MLX5_FLOW_ACTION_RAW_ENCAP)
-#define MLX5_FLOW_DECAP_ACTIONS \
- (MLX5_FLOW_ACTION_VXLAN_DECAP | MLX5_FLOW_ACTION_NVGRE_DECAP)
+#define MLX5_FLOW_DECAP_ACTIONS (MLX5_FLOW_ACTION_VXLAN_DECAP | \
+ MLX5_FLOW_ACTION_NVGRE_DECAP | \
+ MLX5_FLOW_ACTION_RAW_DECAP)
#ifndef IPPROTO_MPLS
#define IPPROTO_MPLS 137
diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
index 6517688..dd99f00 100644
--- a/drivers/net/mlx5/mlx5_flow_dv.c
+++ b/drivers/net/mlx5/mlx5_flow_dv.c
@@ -178,6 +178,101 @@
}
/**
+ * Validate the raw encap action.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the encap action.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_raw_encap(uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ if (!(action->conf))
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, action,
+ "configuration cannot be null");
+ if (action_flags & MLX5_FLOW_ACTION_DROP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and encap in same flow");
+ if (action_flags & MLX5_FLOW_ENCAP_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can only have a single encap"
+ " action in a flow");
+ /* encap without preceding decap is not supported for ingress */
+ if (attr->ingress && !(action_flags & MLX5_FLOW_ACTION_RAW_DECAP))
+ return rte_flow_error_set(error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+ NULL,
+ "encap action not supported for "
+ "ingress");
+ return 0;
+}
+
+/**
+ * Validate the raw decap action.
+ *
+ * @param[in] action_flags
+ * Holds the actions detected until now.
+ * @param[in] action
+ * Pointer to the encap action.
+ * @param[in] attr
+ * Pointer to flow attributes
+ * @param[out] error
+ * Pointer to error structure.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+flow_dv_validate_action_raw_decap(uint64_t action_flags,
+ const struct rte_flow_action *action,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ if (action_flags & MLX5_FLOW_ACTION_DROP)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't drop and decap in same flow");
+ if (action_flags & MLX5_FLOW_ENCAP_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can't have encap action before"
+ " decap action");
+ if (action_flags & MLX5_FLOW_DECAP_ACTIONS)
+ return rte_flow_error_set(error, EINVAL,
+ RTE_FLOW_ERROR_TYPE_ACTION, NULL,
+ "can only have a single decap"
+ " action in a flow");
+ /* decap action is valid on egress only if it is followed by encap */
+ if (attr->egress) {
+ for (; action->type != RTE_FLOW_ACTION_TYPE_END &&
+ action->type != RTE_FLOW_ACTION_TYPE_RAW_ENCAP;
+ action++) {
+ }
+ if (action->type != RTE_FLOW_ACTION_TYPE_RAW_ENCAP)
+ return rte_flow_error_set
+ (error, ENOTSUP,
+ RTE_FLOW_ERROR_TYPE_ATTR_EGRESS,
+ NULL, "decap action not supported"
+ " for egress");
+ }
+ return 0;
+}
+
+/**
* Get the size of specific rte_flow_item_type
*
* @param[in] item_type
@@ -431,23 +526,34 @@
{
struct ibv_flow_action *verbs_action = NULL;
const struct rte_flow_item *encap_data;
+ const struct rte_flow_action_raw_encap *raw_encap_data;
struct priv *priv = dev->data->dev_private;
uint8_t buf[MLX5_ENCAP_MAX_LEN];
+ uint8_t *buf_ptr = buf;
size_t size = 0;
int convert_result = 0;
- if (action->type == RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP)
- encap_data = ((const struct rte_flow_action_vxlan_encap *)
+ if (action->type == RTE_FLOW_ACTION_TYPE_RAW_ENCAP) {
+ raw_encap_data =
+ (const struct rte_flow_action_raw_encap *)action->conf;
+ buf_ptr = raw_encap_data->data;
+ size = raw_encap_data->size;
+ } else {
+ if (action->type == RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP)
+ encap_data =
+ ((const struct rte_flow_action_vxlan_encap *)
action->conf)->definition;
- else
- encap_data = ((const struct rte_flow_action_nvgre_encap *)
+ else
+ encap_data =
+ ((const struct rte_flow_action_nvgre_encap *)
action->conf)->definition;
- convert_result = flow_dv_convert_encap_data(encap_data, buf,
- &size, error);
- if (convert_result)
- return NULL;
+ convert_result = flow_dv_convert_encap_data(encap_data, buf,
+ &size, error);
+ if (convert_result)
+ return NULL;
+ }
verbs_action = mlx5_glue->dv_create_flow_action_packet_reformat
- (priv->ctx, size, buf,
+ (priv->ctx, size, buf_ptr,
MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L2_TUNNEL,
MLX5DV_FLOW_TABLE_TYPE_NIC_TX);
if (!verbs_action)
@@ -485,6 +591,50 @@
}
/**
+ * Convert raw decap/encap (L3 tunnel) action to DV specification.
+ *
+ * @param[in] dev
+ * Pointer to rte_eth_dev structure.
+ * @param[in] action
+ * Pointer to action structure.
+ * @param[in] attr
+ * Pointer to the flow attributes.
+ * @param[out] error
+ * Pointer to the error structure.
+ *
+ * @return
+ * Pointer to action on success, NULL otherwise and rte_errno is set.
+ */
+static struct ibv_flow_action *
+flow_dv_create_action_raw_encap(struct rte_eth_dev *dev,
+ const struct rte_flow_action *action,
+ const struct rte_flow_attr *attr,
+ struct rte_flow_error *error)
+{
+ struct ibv_flow_action *verbs_action = NULL;
+ const struct rte_flow_action_raw_encap *encap_data;
+ struct priv *priv = dev->data->dev_private;
+ enum mlx5dv_flow_action_packet_reformat_type reformat_type;
+ enum mlx5dv_flow_table_type ft_type;
+
+ encap_data = (const struct rte_flow_action_raw_encap *)action->conf;
+ reformat_type = attr->egress ?
+ MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L2_TO_L3_TUNNEL :
+ MLX5DV_FLOW_ACTION_PACKET_REFORMAT_TYPE_L3_TUNNEL_TO_L2;
+ ft_type = attr->egress ?
+ MLX5DV_FLOW_TABLE_TYPE_NIC_TX :
+ MLX5DV_FLOW_TABLE_TYPE_NIC_RX;
+ verbs_action = mlx5_glue->dv_create_flow_action_packet_reformat
+ (priv->ctx, encap_data->size,
+ (encap_data->size ? encap_data->data : NULL),
+ reformat_type, ft_type);
+ if (!verbs_action)
+ rte_flow_error_set(error, EINVAL, RTE_FLOW_ERROR_TYPE_ACTION,
+ NULL, "cannot create encap action");
+ return verbs_action;
+}
+
+/**
* Verify the @p attributes will be correctly understood by the NIC and store
* them in the @p flow if everything is correct.
*
@@ -739,7 +889,6 @@
RTE_FLOW_ACTION_TYPE_VXLAN_ENCAP ?
MLX5_FLOW_ACTION_VXLAN_ENCAP :
MLX5_FLOW_ACTION_NVGRE_ENCAP;
-
++actions_n;
break;
case RTE_FLOW_ACTION_TYPE_VXLAN_DECAP:
@@ -752,7 +901,24 @@
RTE_FLOW_ACTION_TYPE_VXLAN_DECAP ?
MLX5_FLOW_ACTION_VXLAN_DECAP :
MLX5_FLOW_ACTION_NVGRE_DECAP;
-
+ ++actions_n;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
+ ret = flow_dv_validate_action_raw_encap(action_flags,
+ actions, attr,
+ error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_FLOW_ACTION_RAW_ENCAP;
+ ++actions_n;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
+ ret = flow_dv_validate_action_raw_decap(action_flags,
+ actions, attr,
+ error);
+ if (ret < 0)
+ return ret;
+ action_flags |= MLX5_FLOW_ACTION_RAW_DECAP;
++actions_n;
break;
default:
@@ -1467,6 +1633,8 @@
* Flow action to translate.
* @param[in, out] dev_flow
* Pointer to the mlx5_flow.
+ * @param[in] attr
+ * Pointer to the flow attributes.
* @param[out] error
* Pointer to the error structure.
*
@@ -1477,12 +1645,14 @@
flow_dv_create_action(struct rte_eth_dev *dev,
const struct rte_flow_action *action,
struct mlx5_flow *dev_flow,
+ const struct rte_flow_attr *attr,
struct rte_flow_error *error)
{
const struct rte_flow_action_queue *queue;
const struct rte_flow_action_rss *rss;
int actions_n = dev_flow->dv.actions_n;
struct rte_flow *flow = dev_flow->flow;
+ const struct rte_flow_action *action_ptr = action;
switch (action->type) {
case RTE_FLOW_ACTION_TYPE_VOID:
@@ -1558,6 +1728,56 @@
MLX5_FLOW_ACTION_NVGRE_DECAP;
actions_n++;
break;
+ case RTE_FLOW_ACTION_TYPE_RAW_ENCAP:
+ /* Handle encap action with preceding decap */
+ if (flow->actions & MLX5_FLOW_ACTION_RAW_DECAP) {
+ dev_flow->dv.actions[actions_n].type =
+ MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
+ dev_flow->dv.actions[actions_n].action =
+ flow_dv_create_action_raw_encap
+ (dev, action,
+ attr, error);
+ if (!(dev_flow->dv.actions[actions_n].action))
+ return -rte_errno;
+ dev_flow->dv.encap_decap_verbs_action =
+ dev_flow->dv.actions[actions_n].action;
+ } else {
+ /* Handle encap action without preceding decap */
+ dev_flow->dv.actions[actions_n].type =
+ MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
+ dev_flow->dv.actions[actions_n].action =
+ flow_dv_create_action_l2_encap
+ (dev, action, error);
+ if (!(dev_flow->dv.actions[actions_n].action))
+ return -rte_errno;
+ dev_flow->dv.encap_decap_verbs_action =
+ dev_flow->dv.actions[actions_n].action;
+ }
+ flow->actions |= MLX5_FLOW_ACTION_RAW_ENCAP;
+ actions_n++;
+ break;
+ case RTE_FLOW_ACTION_TYPE_RAW_DECAP:
+ /* Check if this decap action is followed by encap. */
+ for (; action_ptr->type != RTE_FLOW_ACTION_TYPE_END &&
+ action_ptr->type != RTE_FLOW_ACTION_TYPE_RAW_ENCAP;
+ action_ptr++) {
+ }
+ /* Handle decap action only if it isn't followed by encap */
+ if (action_ptr->type != RTE_FLOW_ACTION_TYPE_RAW_ENCAP) {
+ dev_flow->dv.actions[actions_n].type =
+ MLX5DV_FLOW_ACTION_IBV_FLOW_ACTION;
+ dev_flow->dv.actions[actions_n].action =
+ flow_dv_create_action_l2_decap(dev,
+ error);
+ if (!(dev_flow->dv.actions[actions_n].action))
+ return -rte_errno;
+ dev_flow->dv.encap_decap_verbs_action =
+ dev_flow->dv.actions[actions_n].action;
+ actions_n++;
+ }
+ /* If decap is followed by encap, handle it at encap case. */
+ flow->actions |= MLX5_FLOW_ACTION_RAW_DECAP;
+ break;
default:
break;
}
@@ -1700,7 +1920,7 @@
struct mlx5_flow *dev_flow,
const struct rte_flow_attr *attr,
const struct rte_flow_item items[],
- const struct rte_flow_action actions[] __rte_unused,
+ const struct rte_flow_action actions[],
struct rte_flow_error *error)
{
struct priv *priv = dev->data->dev_private;
@@ -1730,7 +1950,7 @@
if (flow_dv_matcher_register(dev, &matcher, dev_flow, error))
return -rte_errno;
for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++)
- if (flow_dv_create_action(dev, actions, dev_flow, error))
+ if (flow_dv_create_action(dev, actions, dev_flow, attr, error))
return -rte_errno;
return 0;
}
--
1.8.3.1
next prev parent reply other threads:[~2018-11-01 9:41 UTC|newest]
Thread overview: 94+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-27 14:50 [dpdk-dev] [PATCH 0/4] support DV encap and decap actions Dekel Peled
2018-09-27 14:50 ` [dpdk-dev] [PATCH 1/4] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-02 1:02 ` Yongseok Koh
2018-10-03 6:59 ` Dekel Peled
2018-09-27 14:50 ` [dpdk-dev] [PATCH 2/4] net/mlx5: add definitions for DV encap and decap Dekel Peled
2018-10-03 2:58 ` Yongseok Koh
2018-10-03 7:27 ` Dekel Peled
2018-09-27 14:50 ` [dpdk-dev] [PATCH 3/4] net/mlx5: add DV encap L2 and L3 operations Dekel Peled
2018-10-03 6:58 ` Yongseok Koh
2018-10-03 8:35 ` Dekel Peled
2018-10-03 9:32 ` Yongseok Koh
2018-10-03 11:35 ` Dekel Peled
2018-10-03 11:47 ` Dekel Peled
2018-10-03 13:55 ` Dekel Peled
2018-09-27 14:50 ` [dpdk-dev] [PATCH 4/4] net/mlx5: add DV decap " Dekel Peled
2018-10-03 7:07 ` Yongseok Koh
2018-10-03 16:14 ` Dekel Peled
2018-10-07 14:25 ` [dpdk-dev] [PATCH v2 0/4] add support of Direct Verbs encap and decap actions Dekel Peled
2018-10-09 19:25 ` [dpdk-dev] [PATCH v3 " Dekel Peled
2018-10-10 8:35 ` [dpdk-dev] [PATCH v4 " Dekel Peled
2018-10-11 12:12 ` [dpdk-dev] [PATCH v5 " Dekel Peled
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 0/6] add encap and decap actions to Direct Verbs flow in MLX5 PMD Dekel Peled
2018-10-29 10:03 ` Shahaf Shuler
2018-10-29 14:42 ` Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 0/7] " Dekel Peled
2018-10-31 15:09 ` Shahaf Shuler
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 " Dekel Peled
2018-11-01 12:51 ` Shahaf Shuler
2018-11-01 17:17 ` Ferruh Yigit
2018-11-04 7:12 ` Shahaf Shuler
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 1/7] net/mlx5: add flow action functions to glue Dekel Peled
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 2/7] net/mlx5: add VXLAN encap action to Direct Verbs Dekel Peled
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 3/7] net/mlx5: add VXLAN decap " Dekel Peled
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 4/7] net/mlx5: add NVGRE encap " Dekel Peled
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 5/7] net/mlx5: add NVGRE decap " Dekel Peled
2018-11-01 9:37 ` Dekel Peled [this message]
2018-11-01 9:37 ` [dpdk-dev] [PATCH v8 7/7] net/mlx5: add caching of encap decap actions Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 1/7] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 2/7] net/mlx5: add VXLAN encap action to Direct Verbs Dekel Peled
2018-10-31 15:09 ` Shahaf Shuler
2018-11-01 8:22 ` Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 3/7] net/mlx5: add VXLAN decap " Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 4/7] net/mlx5: add NVGRE encap " Dekel Peled
2018-10-31 15:09 ` Shahaf Shuler
2018-11-01 9:13 ` Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 5/7] net/mlx5: add NVGRE decap " Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 6/7] net/mlx5: add raw data encap decap " Dekel Peled
2018-10-31 7:10 ` [dpdk-dev] [PATCH v7 7/7] net/mlx5: add caching of encap decap actions Dekel Peled
2018-10-31 15:09 ` Shahaf Shuler
2018-11-01 9:15 ` Dekel Peled
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 1/6] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-29 10:03 ` Shahaf Shuler
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 2/6] net/mlx5: add VXLAN encap action to Direct Verbs Dekel Peled
2018-10-29 10:03 ` Shahaf Shuler
2018-10-29 16:44 ` Dekel Peled
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 3/6] net/mlx5: add VXLAN decap " Dekel Peled
2018-10-29 10:03 ` Shahaf Shuler
2018-10-29 16:46 ` Dekel Peled
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 4/6] net/mlx5: add NVGRE encap " Dekel Peled
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 5/6] net/mlx5: add NVGRE decap " Dekel Peled
2018-10-25 20:08 ` [dpdk-dev] [PATCH v6 6/6] net/mlx5: add raw data encap decap " Dekel Peled
2018-10-29 10:03 ` Shahaf Shuler
2018-10-29 16:54 ` Dekel Peled
2018-10-11 12:12 ` [dpdk-dev] [PATCH v5 1/4] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-11 17:05 ` Yongseok Koh
2018-10-11 12:12 ` [dpdk-dev] [PATCH v5 2/4] net/mlx5: add Direct Verbs encap and decap defs Dekel Peled
2018-10-11 12:12 ` [dpdk-dev] [PATCH v5 3/4] net/mlx5: add L2 and L3 encap to Direct Verbs flow Dekel Peled
2018-10-11 12:12 ` [dpdk-dev] [PATCH v5 4/4] net/mlx5: add L2 and L3 decap " Dekel Peled
2018-10-10 8:35 ` [dpdk-dev] [PATCH v4 1/4] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-10 21:22 ` Yongseok Koh
2018-10-10 8:35 ` [dpdk-dev] [PATCH v4 2/4] net/mlx5: add Direct Verbs encap and decap defs Dekel Peled
2018-10-10 8:35 ` [dpdk-dev] [PATCH v4 3/4] net/mlx5: add L2 and L3 encap to Direct Verbs flow Dekel Peled
2018-10-10 8:35 ` [dpdk-dev] [PATCH v4 4/4] net/mlx5: add L2 and L3 decap " Dekel Peled
2018-10-09 19:25 ` [dpdk-dev] [PATCH v3 1/4] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-10 0:36 ` Yongseok Koh
2018-10-10 7:41 ` Dekel Peled
2018-10-10 0:38 ` Yongseok Koh
2018-10-09 19:25 ` [dpdk-dev] [PATCH v3 2/4] net/mlx5: add Direct Verbs encap and decap defs Dekel Peled
2018-10-10 0:40 ` Yongseok Koh
2018-10-09 19:25 ` [dpdk-dev] [PATCH v3 3/4] net/mlx5: add L2 and L3 encap to Direct Verbs flow Dekel Peled
2018-10-10 0:43 ` Yongseok Koh
2018-10-09 19:25 ` [dpdk-dev] [PATCH v3 4/4] net/mlx5: add L2 and L3 decap " Dekel Peled
2018-10-10 0:45 ` Yongseok Koh
2018-10-07 14:25 ` [dpdk-dev] [PATCH v2 1/4] net/mlx5: add flow action functions to glue Dekel Peled
2018-10-08 19:43 ` Yongseok Koh
2018-10-09 18:49 ` Dekel Peled
2018-10-07 14:25 ` [dpdk-dev] [PATCH v2 2/4] net/mlx5: add Direct Verbs encap and decap defs Dekel Peled
2018-10-08 20:46 ` Yongseok Koh
2018-10-07 14:25 ` [dpdk-dev] [PATCH v2 3/4] net/mlx5: add L2 and L3 encap to Direct Verbs flow Dekel Peled
2018-10-08 21:04 ` Yongseok Koh
2018-10-09 15:55 ` Dekel Peled
2018-10-07 14:25 ` [dpdk-dev] [PATCH v2 4/4] net/mlx5: add L2 and L3 decap " Dekel Peled
2018-10-08 21:19 ` Yongseok Koh
2018-10-09 16:56 ` Dekel Peled
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1541065053-28436-7-git-send-email-dekelp@mellanox.com \
--to=dekelp@mellanox.com \
--cc=dev@dpdk.org \
--cc=orika@mellanox.com \
--cc=shahafs@mellanox.com \
--cc=yskoh@mellanox.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).