From: Nicolas Chautru <nicolas.chautru@intel.com>
To: dev@dpdk.org, akhil.goyal@nxp.com
Cc: bruce.richardson@intel.com, rosen.xu@intel.com,
dave.burley@accelercomm.com, aidan.goddard@accelercomm.com,
ferruh.yigit@intel.com, tianjiao.liu@intel.com,
Nicolas Chautru <nicolas.chautru@intel.com>
Subject: [dpdk-dev] [PATCH v8 01/10] drivers/baseband: add PMD for ACC100
Date: Mon, 28 Sep 2020 16:52:17 -0700 [thread overview]
Message-ID: <1601337146-114115-2-git-send-email-nicolas.chautru@intel.com> (raw)
In-Reply-To: <1601337146-114115-1-git-send-email-nicolas.chautru@intel.com>
Add stubs for the ACC100 PMD
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Liu Tianjiao <Tianjiao.liu@intel.com>
---
doc/guides/bbdevs/acc100.rst | 233 +++++++++++++++++++++
doc/guides/bbdevs/features/acc100.ini | 14 ++
doc/guides/bbdevs/index.rst | 1 +
doc/guides/rel_notes/release_20_11.rst | 6 +
drivers/baseband/acc100/meson.build | 6 +
drivers/baseband/acc100/rte_acc100_pmd.c | 175 ++++++++++++++++
drivers/baseband/acc100/rte_acc100_pmd.h | 37 ++++
.../acc100/rte_pmd_bbdev_acc100_version.map | 3 +
drivers/baseband/meson.build | 2 +-
9 files changed, 476 insertions(+), 1 deletion(-)
create mode 100644 doc/guides/bbdevs/acc100.rst
create mode 100644 doc/guides/bbdevs/features/acc100.ini
create mode 100644 drivers/baseband/acc100/meson.build
create mode 100644 drivers/baseband/acc100/rte_acc100_pmd.c
create mode 100644 drivers/baseband/acc100/rte_acc100_pmd.h
create mode 100644 drivers/baseband/acc100/rte_pmd_bbdev_acc100_version.map
diff --git a/doc/guides/bbdevs/acc100.rst b/doc/guides/bbdevs/acc100.rst
new file mode 100644
index 0000000..f87ee09
--- /dev/null
+++ b/doc/guides/bbdevs/acc100.rst
@@ -0,0 +1,233 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2020 Intel Corporation
+
+Intel(R) ACC100 5G/4G FEC Poll Mode Driver
+==========================================
+
+The BBDEV ACC100 5G/4G FEC poll mode driver (PMD) supports an
+implementation of a VRAN FEC wireless acceleration function.
+This device is also known as Mount Bryce.
+
+Features
+--------
+
+ACC100 5G/4G FEC PMD supports the following features:
+
+- LDPC Encode in the DL (5GNR)
+- LDPC Decode in the UL (5GNR)
+- Turbo Encode in the DL (4G)
+- Turbo Decode in the UL (4G)
+- 16 VFs per PF (physical device)
+- Maximum of 128 queues per VF
+- PCIe Gen-3 x16 Interface
+- MSI
+- SR-IOV
+
+ACC100 5G/4G FEC PMD supports the following BBDEV capabilities:
+
+* For the LDPC encode operation:
+ - ``RTE_BBDEV_LDPC_CRC_24B_ATTACH`` : set to attach CRC24B to CB(s)
+ - ``RTE_BBDEV_LDPC_RATE_MATCH`` : if set then do not do Rate Match bypass
+ - ``RTE_BBDEV_LDPC_INTERLEAVER_BYPASS`` : if set then bypass interleaver
+
+* For the LDPC decode operation:
+ - ``RTE_BBDEV_LDPC_CRC_TYPE_24B_CHECK`` : check CRC24B from CB(s)
+ - ``RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE`` : disable early termination
+ - ``RTE_BBDEV_LDPC_CRC_TYPE_24B_DROP`` : drops CRC24B bits appended while decoding
+ - ``RTE_BBDEV_LDPC_HQ_COMBINE_IN_ENABLE`` : provides an input for HARQ combining
+ - ``RTE_BBDEV_LDPC_HQ_COMBINE_OUT_ENABLE`` : provides an input for HARQ combining
+ - ``RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_IN_ENABLE`` : HARQ memory input is internal
+ - ``RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_OUT_ENABLE`` : HARQ memory output is internal
+ - ``RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_LOOPBACK`` : loopback data to/from HARQ memory
+ - ``RTE_BBDEV_LDPC_INTERNAL_HARQ_MEMORY_FILLERS`` : HARQ memory includes the fillers bits
+ - ``RTE_BBDEV_LDPC_DEC_SCATTER_GATHER`` : supports scatter-gather for input/output data
+ - ``RTE_BBDEV_LDPC_HARQ_6BIT_COMPRESSION`` : supports compression of the HARQ input/output
+ - ``RTE_BBDEV_LDPC_LLR_COMPRESSION`` : supports LLR input compression
+
+* For the turbo encode operation:
+ - ``RTE_BBDEV_TURBO_CRC_24B_ATTACH`` : set to attach CRC24B to CB(s)
+ - ``RTE_BBDEV_TURBO_RATE_MATCH`` : if set then do not do Rate Match bypass
+ - ``RTE_BBDEV_TURBO_ENC_INTERRUPTS`` : set for encoder dequeue interrupts
+ - ``RTE_BBDEV_TURBO_RV_INDEX_BYPASS`` : set to bypass RV index
+ - ``RTE_BBDEV_TURBO_ENC_SCATTER_GATHER`` : supports scatter-gather for input/output data
+
+* For the turbo decode operation:
+ - ``RTE_BBDEV_TURBO_CRC_TYPE_24B`` : check CRC24B from CB(s)
+ - ``RTE_BBDEV_TURBO_SUBBLOCK_DEINTERLEAVE`` : perform subblock de-interleave
+ - ``RTE_BBDEV_TURBO_DEC_INTERRUPTS`` : set for decoder dequeue interrupts
+ - ``RTE_BBDEV_TURBO_NEG_LLR_1_BIT_IN`` : set if negative LLR encoder i/p is supported
+ - ``RTE_BBDEV_TURBO_POS_LLR_1_BIT_IN`` : set if positive LLR encoder i/p is supported
+ - ``RTE_BBDEV_TURBO_DEC_TB_CRC_24B_KEEP`` : keep CRC24B bits appended while decoding
+ - ``RTE_BBDEV_TURBO_EARLY_TERMINATION`` : set early early termination feature
+ - ``RTE_BBDEV_TURBO_DEC_SCATTER_GATHER`` : supports scatter-gather for input/output data
+ - ``RTE_BBDEV_TURBO_HALF_ITERATION_EVEN`` : set half iteration granularity
+
+Installation
+------------
+
+Section 3 of the DPDK manual provides instuctions on installing and compiling DPDK. The
+default set of bbdev compile flags may be found in config/common_base, where for example
+the flag to build the ACC100 5G/4G FEC device, ``CONFIG_RTE_LIBRTE_PMD_BBDEV_ACC100``,
+is already set.
+
+DPDK requires hugepages to be configured as detailed in section 2 of the DPDK manual.
+The bbdev test application has been tested with a configuration 40 x 1GB hugepages. The
+hugepage configuration of a server may be examined using:
+
+.. code-block:: console
+
+ grep Huge* /proc/meminfo
+
+
+Initialization
+--------------
+
+When the device first powers up, its PCI Physical Functions (PF) can be listed through this command:
+
+.. code-block:: console
+
+ sudo lspci -vd8086:0d5c
+
+The physical and virtual functions are compatible with Linux UIO drivers:
+``vfio`` and ``igb_uio``. However, in order to work the ACC100 5G/4G
+FEC device firstly needs to be bound to one of these linux drivers through DPDK.
+
+
+Bind PF UIO driver(s)
+~~~~~~~~~~~~~~~~~~~~~
+
+Install the DPDK igb_uio driver, bind it with the PF PCI device ID and use
+``lspci`` to confirm the PF device is under use by ``igb_uio`` DPDK UIO driver.
+
+The igb_uio driver may be bound to the PF PCI device using one of three methods:
+
+
+1. PCI functions (physical or virtual, depending on the use case) can be bound to
+the UIO driver by repeating this command for every function.
+
+.. code-block:: console
+
+ cd <dpdk-top-level-directory>
+ insmod ./build/kmod/igb_uio.ko
+ echo "8086 0d5c" > /sys/bus/pci/drivers/igb_uio/new_id
+ lspci -vd8086:0d5c
+
+
+2. Another way to bind PF with DPDK UIO driver is by using the ``dpdk-devbind.py`` tool
+
+.. code-block:: console
+
+ cd <dpdk-top-level-directory>
+ ./usertools/dpdk-devbind.py -b igb_uio 0000:06:00.0
+
+where the PCI device ID (example: 0000:06:00.0) is obtained using lspci -vd8086:0d5c
+
+
+3. A third way to bind is to use ``dpdk-setup.sh`` tool
+
+.. code-block:: console
+
+ cd <dpdk-top-level-directory>
+ ./usertools/dpdk-setup.sh
+
+ select 'Bind Ethernet/Crypto/Baseband device to IGB UIO module'
+ or
+ select 'Bind Ethernet/Crypto/Baseband device to VFIO module' depending on driver required
+ enter PCI device ID
+ select 'Display current Ethernet/Crypto/Baseband device settings' to confirm binding
+
+
+In the same way the ACC100 5G/4G FEC PF can be bound with vfio, but vfio driver does not
+support SR-IOV configuration right out of the box, so it will need to be patched.
+
+
+Enable Virtual Functions
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+Now, it should be visible in the printouts that PCI PF is under igb_uio control
+"``Kernel driver in use: igb_uio``"
+
+To show the number of available VFs on the device, read ``sriov_totalvfs`` file..
+
+.. code-block:: console
+
+ cat /sys/bus/pci/devices/0000\:<b>\:<d>.<f>/sriov_totalvfs
+
+ where 0000\:<b>\:<d>.<f> is the PCI device ID
+
+
+To enable VFs via igb_uio, echo the number of virtual functions intended to
+enable to ``max_vfs`` file..
+
+.. code-block:: console
+
+ echo <num-of-vfs> > /sys/bus/pci/devices/0000\:<b>\:<d>.<f>/max_vfs
+
+
+Afterwards, all VFs must be bound to appropriate UIO drivers as required, same
+way it was done with the physical function previously.
+
+Enabling SR-IOV via vfio driver is pretty much the same, except that the file
+name is different:
+
+.. code-block:: console
+
+ echo <num-of-vfs> > /sys/bus/pci/devices/0000\:<b>\:<d>.<f>/sriov_numvfs
+
+
+Configure the VFs through PF
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The PCI virtual functions must be configured before working or getting assigned
+to VMs/Containers. The configuration involves allocating the number of hardware
+queues, priorities, load balance, bandwidth and other settings necessary for the
+device to perform FEC functions.
+
+This configuration needs to be executed at least once after reboot or PCI FLR and can
+be achieved by using the function ``acc100_configure()``, which sets up the
+parameters defined in ``acc100_conf`` structure.
+
+Test Application
+----------------
+
+BBDEV provides a test application, ``test-bbdev.py`` and range of test data for testing
+the functionality of ACC100 5G/4G FEC encode and decode, depending on the device's
+capabilities. The test application is located under app->test-bbdev folder and has the
+following options:
+
+.. code-block:: console
+
+ "-p", "--testapp-path": specifies path to the bbdev test app.
+ "-e", "--eal-params" : EAL arguments which are passed to the test app.
+ "-t", "--timeout" : Timeout in seconds (default=300).
+ "-c", "--test-cases" : Defines test cases to run. Run all if not specified.
+ "-v", "--test-vector" : Test vector path (default=dpdk_path+/app/test-bbdev/test_vectors/bbdev_null.data).
+ "-n", "--num-ops" : Number of operations to process on device (default=32).
+ "-b", "--burst-size" : Operations enqueue/dequeue burst size (default=32).
+ "-s", "--snr" : SNR in dB used when generating LLRs for bler tests.
+ "-s", "--iter_max" : Number of iterations for LDPC decoder.
+ "-l", "--num-lcores" : Number of lcores to run (default=16).
+ "-i", "--init-device" : Initialise PF device with default values.
+
+
+To execute the test application tool using simple decode or encode data,
+type one of the following:
+
+.. code-block:: console
+
+ ./test-bbdev.py -c validation -n 64 -b 1 -v ./ldpc_dec_default.data
+ ./test-bbdev.py -c validation -n 64 -b 1 -v ./ldpc_enc_default.data
+
+
+The test application ``test-bbdev.py``, supports the ability to configure the PF device with
+a default set of values, if the "-i" or "- -init-device" option is included. The default values
+are defined in test_bbdev_perf.c.
+
+
+Test Vectors
+~~~~~~~~~~~~
+
+In addition to the simple LDPC decoder and LDPC encoder tests, bbdev also provides
+a range of additional tests under the test_vectors folder, which may be useful. The results
+of these tests will depend on the ACC100 5G/4G FEC capabilities which may cause some
+testcases to be skipped, but no failure should be reported.
diff --git a/doc/guides/bbdevs/features/acc100.ini b/doc/guides/bbdevs/features/acc100.ini
new file mode 100644
index 0000000..c89a4d7
--- /dev/null
+++ b/doc/guides/bbdevs/features/acc100.ini
@@ -0,0 +1,14 @@
+;
+; Supported features of the 'acc100' bbdev driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Turbo Decoder (4G) = N
+Turbo Encoder (4G) = N
+LDPC Decoder (5G) = N
+LDPC Encoder (5G) = N
+LLR/HARQ Compression = N
+External DDR Access = N
+HW Accelerated = Y
+BBDEV API = Y
diff --git a/doc/guides/bbdevs/index.rst b/doc/guides/bbdevs/index.rst
index a8092dd..4445cbd 100644
--- a/doc/guides/bbdevs/index.rst
+++ b/doc/guides/bbdevs/index.rst
@@ -13,3 +13,4 @@ Baseband Device Drivers
turbo_sw
fpga_lte_fec
fpga_5gnr_fec
+ acc100
diff --git a/doc/guides/rel_notes/release_20_11.rst b/doc/guides/rel_notes/release_20_11.rst
index 73ac08f..20639ea 100644
--- a/doc/guides/rel_notes/release_20_11.rst
+++ b/doc/guides/rel_notes/release_20_11.rst
@@ -55,6 +55,12 @@ New Features
Also, make sure to start the actual text at the margin.
=======================================================
+* **Added Intel ACC100 bbdev PMD.**
+
+ Added a new ``acc100`` bbdev driver for the Intel\ |reg| ACC100 accelerator
+ also known as Mount Bryce. See the
+ :doc:`../bbdevs/acc100` BBDEV guide for more details on this new driver.
+
Removed Items
-------------
diff --git a/drivers/baseband/acc100/meson.build b/drivers/baseband/acc100/meson.build
new file mode 100644
index 0000000..8afafc2
--- /dev/null
+++ b/drivers/baseband/acc100/meson.build
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2020 Intel Corporation
+
+deps += ['bbdev', 'bus_vdev', 'ring', 'pci', 'bus_pci']
+
+sources = files('rte_acc100_pmd.c')
diff --git a/drivers/baseband/acc100/rte_acc100_pmd.c b/drivers/baseband/acc100/rte_acc100_pmd.c
new file mode 100644
index 0000000..1b4cd13
--- /dev/null
+++ b/drivers/baseband/acc100/rte_acc100_pmd.c
@@ -0,0 +1,175 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Intel Corporation
+ */
+
+#include <unistd.h>
+
+#include <rte_common.h>
+#include <rte_log.h>
+#include <rte_dev.h>
+#include <rte_malloc.h>
+#include <rte_mempool.h>
+#include <rte_byteorder.h>
+#include <rte_errno.h>
+#include <rte_branch_prediction.h>
+#include <rte_hexdump.h>
+#include <rte_pci.h>
+#include <rte_bus_pci.h>
+
+#include <rte_bbdev.h>
+#include <rte_bbdev_pmd.h>
+#include "rte_acc100_pmd.h"
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+RTE_LOG_REGISTER(acc100_logtype, pmd.bb.acc100, DEBUG);
+#else
+RTE_LOG_REGISTER(acc100_logtype, pmd.bb.acc100, NOTICE);
+#endif
+
+/* Free 64MB memory used for software rings */
+static int
+acc100_dev_close(struct rte_bbdev *dev __rte_unused)
+{
+ return 0;
+}
+
+static const struct rte_bbdev_ops acc100_bbdev_ops = {
+ .close = acc100_dev_close,
+};
+
+/* ACC100 PCI PF address map */
+static struct rte_pci_id pci_id_acc100_pf_map[] = {
+ {
+ RTE_PCI_DEVICE(RTE_ACC100_VENDOR_ID, RTE_ACC100_PF_DEVICE_ID)
+ },
+ {.device_id = 0},
+};
+
+/* ACC100 PCI VF address map */
+static struct rte_pci_id pci_id_acc100_vf_map[] = {
+ {
+ RTE_PCI_DEVICE(RTE_ACC100_VENDOR_ID, RTE_ACC100_VF_DEVICE_ID)
+ },
+ {.device_id = 0},
+};
+
+/* Initialization Function */
+static void
+acc100_bbdev_init(struct rte_bbdev *dev, struct rte_pci_driver *drv)
+{
+ struct rte_pci_device *pci_dev = RTE_DEV_TO_PCI(dev->device);
+
+ dev->dev_ops = &acc100_bbdev_ops;
+
+ ((struct acc100_device *) dev->data->dev_private)->pf_device =
+ !strcmp(drv->driver.name,
+ RTE_STR(ACC100PF_DRIVER_NAME));
+ ((struct acc100_device *) dev->data->dev_private)->mmio_base =
+ pci_dev->mem_resource[0].addr;
+
+ rte_bbdev_log_debug("Init device %s [%s] @ vaddr %p paddr %#"PRIx64"",
+ drv->driver.name, dev->data->name,
+ (void *)pci_dev->mem_resource[0].addr,
+ pci_dev->mem_resource[0].phys_addr);
+}
+
+static int acc100_pci_probe(struct rte_pci_driver *pci_drv,
+ struct rte_pci_device *pci_dev)
+{
+ struct rte_bbdev *bbdev = NULL;
+ char dev_name[RTE_BBDEV_NAME_MAX_LEN];
+
+ if (pci_dev == NULL) {
+ rte_bbdev_log(ERR, "NULL PCI device");
+ return -EINVAL;
+ }
+
+ rte_pci_device_name(&pci_dev->addr, dev_name, sizeof(dev_name));
+
+ /* Allocate memory to be used privately by drivers */
+ bbdev = rte_bbdev_allocate(pci_dev->device.name);
+ if (bbdev == NULL)
+ return -ENODEV;
+
+ /* allocate device private memory */
+ bbdev->data->dev_private = rte_zmalloc_socket(dev_name,
+ sizeof(struct acc100_device), RTE_CACHE_LINE_SIZE,
+ pci_dev->device.numa_node);
+
+ if (bbdev->data->dev_private == NULL) {
+ rte_bbdev_log(CRIT,
+ "Allocate of %zu bytes for device \"%s\" failed",
+ sizeof(struct acc100_device), dev_name);
+ rte_bbdev_release(bbdev);
+ return -ENOMEM;
+ }
+
+ /* Fill HW specific part of device structure */
+ bbdev->device = &pci_dev->device;
+ bbdev->intr_handle = &pci_dev->intr_handle;
+ bbdev->data->socket_id = pci_dev->device.numa_node;
+
+ /* Invoke ACC100 device initialization function */
+ acc100_bbdev_init(bbdev, pci_drv);
+
+ rte_bbdev_log_debug("Initialised bbdev %s (id = %u)",
+ dev_name, bbdev->data->dev_id);
+ return 0;
+}
+
+static int acc100_pci_remove(struct rte_pci_device *pci_dev)
+{
+ struct rte_bbdev *bbdev;
+ int ret;
+ uint8_t dev_id;
+
+ if (pci_dev == NULL)
+ return -EINVAL;
+
+ /* Find device */
+ bbdev = rte_bbdev_get_named_dev(pci_dev->device.name);
+ if (bbdev == NULL) {
+ rte_bbdev_log(CRIT,
+ "Couldn't find HW dev \"%s\" to uninitialise it",
+ pci_dev->device.name);
+ return -ENODEV;
+ }
+ dev_id = bbdev->data->dev_id;
+
+ /* free device private memory before close */
+ rte_free(bbdev->data->dev_private);
+
+ /* Close device */
+ ret = rte_bbdev_close(dev_id);
+ if (ret < 0)
+ rte_bbdev_log(ERR,
+ "Device %i failed to close during uninit: %i",
+ dev_id, ret);
+
+ /* release bbdev from library */
+ rte_bbdev_release(bbdev);
+
+ rte_bbdev_log_debug("Destroyed bbdev = %u", dev_id);
+
+ return 0;
+}
+
+static struct rte_pci_driver acc100_pci_pf_driver = {
+ .probe = acc100_pci_probe,
+ .remove = acc100_pci_remove,
+ .id_table = pci_id_acc100_pf_map,
+ .drv_flags = RTE_PCI_DRV_NEED_MAPPING
+};
+
+static struct rte_pci_driver acc100_pci_vf_driver = {
+ .probe = acc100_pci_probe,
+ .remove = acc100_pci_remove,
+ .id_table = pci_id_acc100_vf_map,
+ .drv_flags = RTE_PCI_DRV_NEED_MAPPING
+};
+
+RTE_PMD_REGISTER_PCI(ACC100PF_DRIVER_NAME, acc100_pci_pf_driver);
+RTE_PMD_REGISTER_PCI_TABLE(ACC100PF_DRIVER_NAME, pci_id_acc100_pf_map);
+RTE_PMD_REGISTER_PCI(ACC100VF_DRIVER_NAME, acc100_pci_vf_driver);
+RTE_PMD_REGISTER_PCI_TABLE(ACC100VF_DRIVER_NAME, pci_id_acc100_vf_map);
+
diff --git a/drivers/baseband/acc100/rte_acc100_pmd.h b/drivers/baseband/acc100/rte_acc100_pmd.h
new file mode 100644
index 0000000..6f46df0
--- /dev/null
+++ b/drivers/baseband/acc100/rte_acc100_pmd.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Intel Corporation
+ */
+
+#ifndef _RTE_ACC100_PMD_H_
+#define _RTE_ACC100_PMD_H_
+
+/* Helper macro for logging */
+#define rte_bbdev_log(level, fmt, ...) \
+ rte_log(RTE_LOG_ ## level, acc100_logtype, fmt "\n", \
+ ##__VA_ARGS__)
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+#define rte_bbdev_log_debug(fmt, ...) \
+ rte_bbdev_log(DEBUG, "acc100_pmd: " fmt, \
+ ##__VA_ARGS__)
+#else
+#define rte_bbdev_log_debug(fmt, ...)
+#endif
+
+/* ACC100 PF and VF driver names */
+#define ACC100PF_DRIVER_NAME intel_acc100_pf
+#define ACC100VF_DRIVER_NAME intel_acc100_vf
+
+/* ACC100 PCI vendor & device IDs */
+#define RTE_ACC100_VENDOR_ID (0x8086)
+#define RTE_ACC100_PF_DEVICE_ID (0x0d5c)
+#define RTE_ACC100_VF_DEVICE_ID (0x0d5d)
+
+/* Private data structure for each ACC100 device */
+struct acc100_device {
+ void *mmio_base; /**< Base address of MMIO registers (BAR0) */
+ bool pf_device; /**< True if this is a PF ACC100 device */
+ bool configured; /**< True if this ACC100 device is configured */
+};
+
+#endif /* _RTE_ACC100_PMD_H_ */
diff --git a/drivers/baseband/acc100/rte_pmd_bbdev_acc100_version.map b/drivers/baseband/acc100/rte_pmd_bbdev_acc100_version.map
new file mode 100644
index 0000000..4a76d1d
--- /dev/null
+++ b/drivers/baseband/acc100/rte_pmd_bbdev_acc100_version.map
@@ -0,0 +1,3 @@
+DPDK_21 {
+ local: *;
+};
diff --git a/drivers/baseband/meson.build b/drivers/baseband/meson.build
index 415b672..72301ce 100644
--- a/drivers/baseband/meson.build
+++ b/drivers/baseband/meson.build
@@ -5,7 +5,7 @@ if is_windows
subdir_done()
endif
-drivers = ['null', 'turbo_sw', 'fpga_lte_fec', 'fpga_5gnr_fec']
+drivers = ['null', 'turbo_sw', 'fpga_lte_fec', 'fpga_5gnr_fec', 'acc100']
config_flag_fmt = 'RTE_LIBRTE_PMD_BBDEV_@0@'
driver_name_fmt = 'rte_pmd_bbdev_@0@'
--
1.8.3.1
next prev parent reply other threads:[~2020-09-28 23:54 UTC|newest]
Thread overview: 213+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-19 0:25 [dpdk-dev] [PATCH v3 00/11] bbdev PMD ACC100 Nicolas Chautru
2020-08-19 0:25 ` [dpdk-dev] [PATCH v3 01/11] drivers/baseband: add PMD for ACC100 Nicolas Chautru
2020-08-29 9:44 ` Xu, Rosen
2020-09-04 16:44 ` Chautru, Nicolas
2020-08-19 0:25 ` [dpdk-dev] [PATCH v3 02/11] baseband/acc100: add register definition file Nicolas Chautru
2020-08-29 9:55 ` Xu, Rosen
2020-08-29 17:39 ` Chautru, Nicolas
2020-09-03 2:15 ` Xu, Rosen
2020-09-03 9:17 ` Ferruh Yigit
2020-08-19 0:25 ` [dpdk-dev] [PATCH v3 03/11] baseband/acc100: add info get function Nicolas Chautru
2020-08-19 0:25 ` [dpdk-dev] [PATCH v3 04/11] baseband/acc100: add queue configuration Nicolas Chautru
2020-08-29 10:39 ` Xu, Rosen
2020-08-29 17:48 ` Chautru, Nicolas
2020-09-03 2:30 ` Xu, Rosen
2020-09-03 22:48 ` Chautru, Nicolas
2020-09-04 2:01 ` Xu, Rosen
2020-08-19 0:25 ` [dpdk-dev] [PATCH v3 05/11] baseband/acc100: add LDPC processing functions Nicolas Chautru
2020-08-20 14:38 ` Dave Burley
2020-08-20 14:52 ` Chautru, Nicolas
2020-08-20 14:57 ` Dave Burley
2020-08-20 21:05 ` Chautru, Nicolas
2020-09-03 8:06 ` Dave Burley
2020-08-29 11:10 ` Xu, Rosen
2020-08-29 18:01 ` Chautru, Nicolas
2020-09-03 2:34 ` Xu, Rosen
2020-09-03 9:09 ` Ananyev, Konstantin
2020-09-03 20:45 ` Chautru, Nicolas
2020-09-15 1:45 ` Chautru, Nicolas
2020-09-15 10:21 ` Ananyev, Konstantin
2020-08-19 0:25 ` [dpdk-dev] [PATCH v3 06/11] baseband/acc100: add HARQ loopback support Nicolas Chautru
2020-08-19 0:25 ` [dpdk-dev] [PATCH v3 07/11] baseband/acc100: add support for 4G processing Nicolas Chautru
2020-08-19 0:25 ` [dpdk-dev] [PATCH v3 08/11] baseband/acc100: add interrupt support to PMD Nicolas Chautru
2020-08-19 0:25 ` [dpdk-dev] [PATCH v3 09/11] baseband/acc100: add debug function to validate input Nicolas Chautru
2020-08-19 0:25 ` [dpdk-dev] [PATCH v3 10/11] baseband/acc100: add configure function Nicolas Chautru
2020-09-03 10:06 ` Aidan Goddard
2020-09-03 18:53 ` Chautru, Nicolas
2020-08-19 0:25 ` [dpdk-dev] [PATCH v3 11/11] doc: update bbdev feature table Nicolas Chautru
2020-09-04 17:53 ` [dpdk-dev] [PATCH v4 00/11] bbdev PMD ACC100 Nicolas Chautru
2020-09-04 17:53 ` [dpdk-dev] [PATCH v4 01/11] drivers/baseband: add PMD for ACC100 Nicolas Chautru
2020-09-08 3:10 ` Liu, Tianjiao
2020-09-04 17:53 ` [dpdk-dev] [PATCH v4 02/11] baseband/acc100: add register definition file Nicolas Chautru
2020-09-15 2:31 ` Xu, Rosen
2020-09-18 2:39 ` Liu, Tianjiao
2020-09-04 17:53 ` [dpdk-dev] [PATCH v4 03/11] baseband/acc100: add info get function Nicolas Chautru
2020-09-18 2:47 ` Liu, Tianjiao
2020-09-04 17:54 ` [dpdk-dev] [PATCH v4 04/11] baseband/acc100: add queue configuration Nicolas Chautru
2020-09-15 2:31 ` Xu, Rosen
2020-09-18 3:01 ` Liu, Tianjiao
2020-09-04 17:54 ` [dpdk-dev] [PATCH v4 05/11] baseband/acc100: add LDPC processing functions Nicolas Chautru
2020-09-21 1:40 ` Liu, Tianjiao
2020-09-04 17:54 ` [dpdk-dev] [PATCH v4 06/11] baseband/acc100: add HARQ loopback support Nicolas Chautru
2020-09-21 1:41 ` Liu, Tianjiao
2020-09-04 17:54 ` [dpdk-dev] [PATCH v4 07/11] baseband/acc100: add support for 4G processing Nicolas Chautru
2020-09-21 1:43 ` Liu, Tianjiao
2020-09-04 17:54 ` [dpdk-dev] [PATCH v4 08/11] baseband/acc100: add interrupt support to PMD Nicolas Chautru
2020-09-21 1:45 ` Liu, Tianjiao
2020-09-04 17:54 ` [dpdk-dev] [PATCH v4 09/11] baseband/acc100: add debug function to validate input Nicolas Chautru
2020-09-21 1:46 ` Liu, Tianjiao
2020-09-04 17:54 ` [dpdk-dev] [PATCH v4 10/11] baseband/acc100: add configure function Nicolas Chautru
2020-09-21 1:48 ` Liu, Tianjiao
2020-09-04 17:54 ` [dpdk-dev] [PATCH v4 11/11] doc: update bbdev feature table Nicolas Chautru
2020-09-21 1:50 ` Liu, Tianjiao
2020-09-21 14:36 ` [dpdk-dev] [PATCH v4 00/11] bbdev PMD ACC100 Chautru, Nicolas
2020-09-22 19:32 ` Akhil Goyal
2020-09-23 2:21 ` Chautru, Nicolas
2020-09-23 2:12 ` [dpdk-dev] [PATCH v5 " Nicolas Chautru
2020-09-23 2:12 ` [dpdk-dev] [PATCH v5 01/11] drivers/baseband: add PMD for ACC100 Nicolas Chautru
2020-09-23 2:12 ` [dpdk-dev] [PATCH v5 02/11] baseband/acc100: add register definition file Nicolas Chautru
2020-09-23 2:12 ` [dpdk-dev] [PATCH v5 03/11] baseband/acc100: add info get function Nicolas Chautru
2020-09-23 2:12 ` [dpdk-dev] [PATCH v5 04/11] baseband/acc100: add queue configuration Nicolas Chautru
2020-09-23 2:12 ` [dpdk-dev] [PATCH v5 05/11] baseband/acc100: add LDPC processing functions Nicolas Chautru
2020-09-23 2:12 ` [dpdk-dev] [PATCH v5 06/11] baseband/acc100: add HARQ loopback support Nicolas Chautru
2020-09-23 2:12 ` [dpdk-dev] [PATCH v5 07/11] baseband/acc100: add support for 4G processing Nicolas Chautru
2020-09-23 2:12 ` [dpdk-dev] [PATCH v5 08/11] baseband/acc100: add interrupt support to PMD Nicolas Chautru
2020-09-23 2:12 ` [dpdk-dev] [PATCH v5 09/11] baseband/acc100: add debug function to validate input Nicolas Chautru
2020-09-23 2:12 ` [dpdk-dev] [PATCH v5 10/11] baseband/acc100: add configure function Nicolas Chautru
2020-09-23 2:12 ` [dpdk-dev] [PATCH v5 11/11] doc: update bbdev feature table Nicolas Chautru
2020-09-23 2:19 ` [dpdk-dev] [PATCH v6 00/11] bbdev PMD ACC100 Nicolas Chautru
2020-09-23 2:19 ` [dpdk-dev] [PATCH v6 01/11] service: retrieve lcore active state Nicolas Chautru
2020-09-23 2:19 ` [dpdk-dev] [PATCH v6 02/11] test/service: fix race condition on stopping lcore Nicolas Chautru
2020-09-23 2:19 ` [dpdk-dev] [PATCH v6 03/11] drivers/baseband: add PMD for ACC100 Nicolas Chautru
2020-09-23 2:19 ` [dpdk-dev] [PATCH v6 04/11] baseband/acc100: add register definition file Nicolas Chautru
2020-09-23 2:19 ` [dpdk-dev] [PATCH v6 05/11] baseband/acc100: add info get function Nicolas Chautru
2020-09-23 2:19 ` [dpdk-dev] [PATCH v6 06/11] baseband/acc100: add queue configuration Nicolas Chautru
2020-09-23 2:19 ` [dpdk-dev] [PATCH v6 07/11] baseband/acc100: add LDPC processing functions Nicolas Chautru
2020-09-23 2:19 ` [dpdk-dev] [PATCH v6 08/11] baseband/acc100: add HARQ loopback support Nicolas Chautru
2020-09-23 2:19 ` [dpdk-dev] [PATCH v6 09/11] baseband/acc100: add support for 4G processing Nicolas Chautru
2020-09-23 2:19 ` [dpdk-dev] [PATCH v6 10/11] baseband/acc100: add interrupt support to PMD Nicolas Chautru
2020-09-23 2:19 ` [dpdk-dev] [PATCH v6 11/11] baseband/acc100: add debug function to validate input Nicolas Chautru
2020-09-23 2:24 ` [dpdk-dev] [PATCH v7 00/11] bbdev PMD ACC100 Nicolas Chautru
2020-09-23 2:24 ` [dpdk-dev] [PATCH v7 01/11] drivers/baseband: add PMD for ACC100 Nicolas Chautru
2020-09-23 2:24 ` [dpdk-dev] [PATCH v7 02/11] baseband/acc100: add register definition file Nicolas Chautru
2020-09-23 2:24 ` [dpdk-dev] [PATCH v7 03/11] baseband/acc100: add info get function Nicolas Chautru
2020-09-23 2:24 ` [dpdk-dev] [PATCH v7 04/11] baseband/acc100: add queue configuration Nicolas Chautru
2020-09-23 2:25 ` [dpdk-dev] [PATCH v7 05/11] baseband/acc100: add LDPC processing functions Nicolas Chautru
2020-09-23 2:25 ` [dpdk-dev] [PATCH v7 06/11] baseband/acc100: add HARQ loopback support Nicolas Chautru
2020-09-23 2:25 ` [dpdk-dev] [PATCH v7 07/11] baseband/acc100: add support for 4G processing Nicolas Chautru
2020-09-23 2:25 ` [dpdk-dev] [PATCH v7 08/11] baseband/acc100: add interrupt support to PMD Nicolas Chautru
2020-09-23 2:25 ` [dpdk-dev] [PATCH v7 09/11] baseband/acc100: add debug function to validate input Nicolas Chautru
2020-09-23 2:25 ` [dpdk-dev] [PATCH v7 10/11] baseband/acc100: add configure function Nicolas Chautru
2020-09-23 2:25 ` [dpdk-dev] [PATCH v7 11/11] doc: update bbdev feature table Nicolas Chautru
2020-09-28 20:19 ` Akhil Goyal
2020-09-29 0:57 ` Chautru, Nicolas
2020-09-28 23:52 ` [dpdk-dev] [PATCH v8 00/10] bbdev PMD ACC100 Nicolas Chautru
2020-09-28 23:52 ` Nicolas Chautru [this message]
2020-09-28 23:52 ` [dpdk-dev] [PATCH v8 02/10] baseband/acc100: add register definition file Nicolas Chautru
2020-09-28 23:52 ` [dpdk-dev] [PATCH v8 03/10] baseband/acc100: add info get function Nicolas Chautru
2020-09-28 23:52 ` [dpdk-dev] [PATCH v8 04/10] baseband/acc100: add queue configuration Nicolas Chautru
2020-09-28 23:52 ` [dpdk-dev] [PATCH v8 05/10] baseband/acc100: add LDPC processing functions Nicolas Chautru
2020-09-28 23:52 ` [dpdk-dev] [PATCH v8 06/10] baseband/acc100: add HARQ loopback support Nicolas Chautru
2020-09-28 23:52 ` [dpdk-dev] [PATCH v8 07/10] baseband/acc100: add support for 4G processing Nicolas Chautru
2020-09-28 23:52 ` [dpdk-dev] [PATCH v8 08/10] baseband/acc100: add interrupt support to PMD Nicolas Chautru
2020-09-28 23:52 ` [dpdk-dev] [PATCH v8 09/10] baseband/acc100: add debug function to validate input Nicolas Chautru
2020-09-28 23:52 ` [dpdk-dev] [PATCH v8 10/10] baseband/acc100: add configure function Nicolas Chautru
2020-09-29 0:29 ` [dpdk-dev] [PATCH v9 00/10] bbdev PMD ACC100 Nicolas Chautru
2020-09-29 0:29 ` [dpdk-dev] [PATCH v9 01/10] drivers/baseband: add PMD for ACC100 Nicolas Chautru
2020-09-29 19:53 ` Tom Rix
2020-09-29 23:17 ` Chautru, Nicolas
2020-09-30 23:06 ` Tom Rix
2020-09-30 23:30 ` Chautru, Nicolas
2020-09-29 0:29 ` [dpdk-dev] [PATCH v9 02/10] baseband/acc100: add register definition file Nicolas Chautru
2020-09-29 20:34 ` Tom Rix
2020-09-29 23:30 ` Chautru, Nicolas
2020-09-30 23:11 ` Tom Rix
2020-09-29 0:29 ` [dpdk-dev] [PATCH v9 03/10] baseband/acc100: add info get function Nicolas Chautru
2020-09-29 21:13 ` Tom Rix
2020-09-30 0:25 ` Chautru, Nicolas
2020-09-30 23:20 ` Tom Rix
2020-09-29 0:29 ` [dpdk-dev] [PATCH v9 04/10] baseband/acc100: add queue configuration Nicolas Chautru
2020-09-29 21:46 ` Tom Rix
2020-09-30 1:03 ` Chautru, Nicolas
2020-09-30 23:36 ` Tom Rix
2020-09-29 0:29 ` [dpdk-dev] [PATCH v9 05/10] baseband/acc100: add LDPC processing functions Nicolas Chautru
2020-09-30 16:53 ` Tom Rix
2020-09-30 18:52 ` Chautru, Nicolas
2020-10-01 15:31 ` Tom Rix
2020-10-01 16:07 ` Chautru, Nicolas
2020-09-29 0:29 ` [dpdk-dev] [PATCH v9 06/10] baseband/acc100: add HARQ loopback support Nicolas Chautru
2020-09-30 17:25 ` Tom Rix
2020-09-30 18:55 ` Chautru, Nicolas
2020-10-01 15:32 ` Tom Rix
2020-09-29 0:29 ` [dpdk-dev] [PATCH v9 07/10] baseband/acc100: add support for 4G processing Nicolas Chautru
2020-09-30 18:37 ` Tom Rix
2020-09-30 19:10 ` Chautru, Nicolas
2020-10-01 15:42 ` Tom Rix
2020-10-01 21:46 ` Chautru, Nicolas
2020-09-29 0:29 ` [dpdk-dev] [PATCH v9 08/10] baseband/acc100: add interrupt support to PMD Nicolas Chautru
2020-09-30 19:03 ` Tom Rix
2020-09-30 19:45 ` Chautru, Nicolas
2020-10-01 16:05 ` Tom Rix
2020-10-01 21:07 ` Chautru, Nicolas
2020-09-29 0:29 ` [dpdk-dev] [PATCH v9 09/10] baseband/acc100: add debug function to validate input Nicolas Chautru
2020-09-30 19:16 ` Tom Rix
2020-09-30 19:53 ` Chautru, Nicolas
2020-10-01 16:07 ` Tom Rix
2020-09-29 0:29 ` [dpdk-dev] [PATCH v9 10/10] baseband/acc100: add configure function Nicolas Chautru
2020-09-30 19:58 ` Tom Rix
2020-09-30 22:54 ` Chautru, Nicolas
2020-10-01 16:18 ` Tom Rix
2020-10-01 21:11 ` Chautru, Nicolas
2020-10-01 3:14 ` [dpdk-dev] [PATCH v10 00/10] bbdev PMD ACC100 Nicolas Chautru
2020-10-01 3:14 ` [dpdk-dev] [PATCH v10 01/10] drivers/baseband: add PMD for ACC100 Nicolas Chautru
2020-10-01 3:14 ` [dpdk-dev] [PATCH v10 02/10] baseband/acc100: add register definition file Nicolas Chautru
2020-10-01 3:14 ` [dpdk-dev] [PATCH v10 03/10] baseband/acc100: add info get function Nicolas Chautru
2020-10-01 14:34 ` Maxime Coquelin
2020-10-01 19:50 ` Chautru, Nicolas
2020-10-01 3:14 ` [dpdk-dev] [PATCH v10 04/10] baseband/acc100: add queue configuration Nicolas Chautru
2020-10-01 15:38 ` Maxime Coquelin
2020-10-01 19:50 ` Chautru, Nicolas
2020-10-01 3:14 ` [dpdk-dev] [PATCH v10 05/10] baseband/acc100: add LDPC processing functions Nicolas Chautru
2020-10-01 3:14 ` [dpdk-dev] [PATCH v10 06/10] baseband/acc100: add HARQ loopback support Nicolas Chautru
2020-10-01 3:14 ` [dpdk-dev] [PATCH v10 07/10] baseband/acc100: add support for 4G processing Nicolas Chautru
2020-10-01 3:14 ` [dpdk-dev] [PATCH v10 08/10] baseband/acc100: add interrupt support to PMD Nicolas Chautru
2020-10-01 3:14 ` [dpdk-dev] [PATCH v10 09/10] baseband/acc100: add debug function to validate input Nicolas Chautru
2020-10-01 3:14 ` [dpdk-dev] [PATCH v10 10/10] baseband/acc100: add configure function Nicolas Chautru
2020-10-01 14:11 ` Maxime Coquelin
2020-10-01 15:36 ` Chautru, Nicolas
2020-10-01 15:43 ` Maxime Coquelin
2020-10-01 19:50 ` Chautru, Nicolas
2020-10-01 21:44 ` Maxime Coquelin
2020-10-02 1:01 ` [dpdk-dev] [PATCH v11 00/10] bbdev PMD ACC100 Nicolas Chautru
2020-10-02 1:01 ` [dpdk-dev] [PATCH v11 01/10] drivers/baseband: add PMD for ACC100 Nicolas Chautru
2020-10-04 15:53 ` Tom Rix
2020-10-02 1:01 ` [dpdk-dev] [PATCH v11 02/10] baseband/acc100: add register definition file Nicolas Chautru
2020-10-04 15:56 ` Tom Rix
2020-10-02 1:01 ` [dpdk-dev] [PATCH v11 03/10] baseband/acc100: add info get function Nicolas Chautru
2020-10-04 16:09 ` Tom Rix
2020-10-05 16:38 ` Chautru, Nicolas
2020-10-05 22:19 ` Chautru, Nicolas
2020-10-02 1:01 ` [dpdk-dev] [PATCH v11 04/10] baseband/acc100: add queue configuration Nicolas Chautru
2020-10-04 16:18 ` Tom Rix
2020-10-05 16:42 ` Chautru, Nicolas
2020-10-02 1:01 ` [dpdk-dev] [PATCH v11 05/10] baseband/acc100: add LDPC processing functions Nicolas Chautru
2020-10-02 1:01 ` [dpdk-dev] [PATCH v11 06/10] baseband/acc100: add HARQ loopback support Nicolas Chautru
2020-10-02 1:01 ` [dpdk-dev] [PATCH v11 07/10] baseband/acc100: add support for 4G processing Nicolas Chautru
2020-10-02 1:01 ` [dpdk-dev] [PATCH v11 08/10] baseband/acc100: add interrupt support to PMD Nicolas Chautru
2020-10-02 1:01 ` [dpdk-dev] [PATCH v11 09/10] baseband/acc100: add debug function to validate input Nicolas Chautru
2020-10-02 1:01 ` [dpdk-dev] [PATCH v11 10/10] baseband/acc100: add configure function Nicolas Chautru
2020-10-05 22:12 ` [dpdk-dev] [PATCH v12 00/10] bbdev PMD ACC100 Nicolas Chautru
2020-10-05 22:12 ` [dpdk-dev] [PATCH v12 01/10] drivers/baseband: add PMD for ACC100 Nicolas Chautru
2020-11-02 9:25 ` Ferruh Yigit
2020-11-02 11:16 ` Ferruh Yigit
2020-10-05 22:12 ` [dpdk-dev] [PATCH v12 02/10] baseband/acc100: add register definition file Nicolas Chautru
2020-10-05 22:12 ` [dpdk-dev] [PATCH v12 03/10] baseband/acc100: add info get function Nicolas Chautru
2020-10-05 22:12 ` [dpdk-dev] [PATCH v12 04/10] baseband/acc100: add queue configuration Nicolas Chautru
2020-10-05 22:12 ` [dpdk-dev] [PATCH v12 05/10] baseband/acc100: add LDPC processing functions Nicolas Chautru
2020-10-05 22:12 ` [dpdk-dev] [PATCH v12 06/10] baseband/acc100: add HARQ loopback support Nicolas Chautru
2020-10-05 22:12 ` [dpdk-dev] [PATCH v12 07/10] baseband/acc100: add support for 4G processing Nicolas Chautru
2020-10-05 22:12 ` [dpdk-dev] [PATCH v12 08/10] baseband/acc100: add interrupt support to PMD Nicolas Chautru
2020-10-05 22:12 ` [dpdk-dev] [PATCH v12 09/10] baseband/acc100: add debug function to validate input Nicolas Chautru
2020-10-05 22:12 ` [dpdk-dev] [PATCH v12 10/10] baseband/acc100: add configure function Nicolas Chautru
2020-10-06 13:20 ` [dpdk-dev] [PATCH v12 00/10] bbdev PMD ACC100 Maxime Coquelin
2020-10-06 19:43 ` Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1601337146-114115-2-git-send-email-nicolas.chautru@intel.com \
--to=nicolas.chautru@intel.com \
--cc=aidan.goddard@accelercomm.com \
--cc=akhil.goyal@nxp.com \
--cc=bruce.richardson@intel.com \
--cc=dave.burley@accelercomm.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=rosen.xu@intel.com \
--cc=tianjiao.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).