From: Andrew Rybchenko <arybchenko@solarflare.com>
To: <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH 00/36] net/sfc: add EF100 support
Date: Tue, 13 Oct 2020 14:45:17 +0100 [thread overview]
Message-ID: <1602596753-32282-1-git-send-email-arybchenko@solarflare.com> (raw)
Add Alveo SN1000 SmartNICs family basic support.
Andrew Rybchenko (30):
doc: fix typo in EF10 Rx equal stride super-buffer name
doc: avoid references to removed config variables in net/sfc
common/sfc_efx/base: factor out wrapper to set PHY link
common/sfc_efx/base: factor out MCDI wrapper to set LEDs
common/sfc_efx/base: fix PHY config failure on Riverhead
common/sfc_efx/base: add max number of Rx scatter buffers
net/sfc: log Rx/Tx doorbell addresses useful for debugging
net/sfc: add caps to specify if libefx supports Rx/Tx
net/sfc: add EF100 support
net/sfc: implement libefx Rx packets event callbacks
net/sfc: implement libefx Tx descs complete event callbacks
net/sfc: log DMA allocations addresses
net/sfc: support datapath logs which may be compiled out
net/sfc: implement EF100 native Rx datapath
net/sfc: implement EF100 native Tx datapath
net/sfc: support multi-segment transmit for EF100 datapath
net/sfc: support TCP and UDP checksum offloads for EF100
net/sfc: support IPv4 header checksum offload for EF100 Tx
net/sfc: support tunnels for EF100 native Tx datapath
net/sfc: support Tx VLAN insertion offload for EF100
net/sfc: support Rx checksum offload for EF100
common/sfc_efx/base: simplify to request Rx prefix fields
common/sfc_efx/base: provide control to deliver RSS hash
common/sfc_efx/base: provide helper to check Rx prefix
net/sfc: map Rx offload RSS hash to corresponding RxQ flag
net/sfc: support per-queue Rx prefix for EF100
net/sfc: support per-queue Rx RSS hash offload for EF100
net/sfc: support user mark and flag Rx for EF100
net/sfc: add Rx interrupts support for EF100
doc: advertise Alveo SN1000 SmartNICs family support
Igor Romanov (3):
net/sfc: check vs maximum number of Rx scatter buffers
net/sfc: use BAR layout discovery to find control window
net/sfc: forward function control window offset to datapath
Ivan Malov (3):
net/sfc: add header segments check for EF100 Tx datapath
net/sfc: support TSO for EF100 native datapath
net/sfc: support tunnel TSO for EF100 native Tx datapath
doc/guides/nics/sfc_efx.rst | 45 +-
drivers/common/sfc_efx/base/ef10_nic.c | 3 +
drivers/common/sfc_efx/base/ef10_phy.c | 134 ++-
drivers/common/sfc_efx/base/ef10_rx.c | 45 +-
drivers/common/sfc_efx/base/efx.h | 23 +-
drivers/common/sfc_efx/base/efx_rx.c | 59 ++
drivers/common/sfc_efx/base/rhead_nic.c | 3 +
drivers/common/sfc_efx/base/rhead_rx.c | 14 +-
drivers/common/sfc_efx/base/siena_nic.c | 1 +
drivers/common/sfc_efx/efsys.h | 12 +-
.../sfc_efx/rte_common_sfc_efx_version.map | 1 +
drivers/net/sfc/meson.build | 6 +-
drivers/net/sfc/sfc.c | 93 +-
drivers/net/sfc/sfc.h | 2 +
drivers/net/sfc/sfc_dp.h | 10 +
drivers/net/sfc/sfc_dp_rx.h | 6 +-
drivers/net/sfc/sfc_dp_tx.h | 96 +-
drivers/net/sfc/sfc_ef100.h | 63 ++
drivers/net/sfc/sfc_ef100_rx.c | 918 +++++++++++++++++
drivers/net/sfc/sfc_ef100_tx.c | 965 ++++++++++++++++++
drivers/net/sfc/sfc_ef10_essb_rx.c | 34 +-
drivers/net/sfc/sfc_ef10_rx.c | 24 +-
drivers/net/sfc/sfc_ef10_tx.c | 7 +-
drivers/net/sfc/sfc_ethdev.c | 11 +-
drivers/net/sfc/sfc_ev.c | 60 ++
drivers/net/sfc/sfc_kvargs.h | 7 +-
drivers/net/sfc/sfc_rx.c | 42 +-
drivers/net/sfc/sfc_rx.h | 1 +
drivers/net/sfc/sfc_tx.c | 21 +-
29 files changed, 2578 insertions(+), 128 deletions(-)
create mode 100644 drivers/net/sfc/sfc_ef100.h
create mode 100644 drivers/net/sfc/sfc_ef100_rx.c
create mode 100644 drivers/net/sfc/sfc_ef100_tx.c
--
2.17.1
next reply other threads:[~2020-10-13 13:47 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-13 13:45 Andrew Rybchenko [this message]
2020-10-13 13:45 ` [dpdk-dev] [PATCH 01/36] doc: fix typo in EF10 Rx equal stride super-buffer name Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 02/36] doc: avoid references to removed config variables in net/sfc Andrew Rybchenko
2020-10-14 10:40 ` Ferruh Yigit
2020-10-13 13:45 ` [dpdk-dev] [PATCH 03/36] common/sfc_efx/base: factor out wrapper to set PHY link Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 04/36] common/sfc_efx/base: factor out MCDI wrapper to set LEDs Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 05/36] common/sfc_efx/base: fix PHY config failure on Riverhead Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 06/36] common/sfc_efx/base: add max number of Rx scatter buffers Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 07/36] net/sfc: check vs maximum " Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 08/36] net/sfc: log Rx/Tx doorbell addresses useful for debugging Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 09/36] net/sfc: add caps to specify if libefx supports Rx/Tx Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 10/36] net/sfc: add EF100 support Andrew Rybchenko
2020-10-14 10:40 ` Ferruh Yigit
2020-10-14 11:21 ` Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 11/36] net/sfc: use BAR layout discovery to find control window Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 12/36] net/sfc: implement libefx Rx packets event callbacks Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 13/36] net/sfc: implement libefx Tx descs complete " Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 14/36] net/sfc: log DMA allocations addresses Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 15/36] net/sfc: support datapath logs which may be compiled out Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 16/36] net/sfc: implement EF100 native Rx datapath Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 17/36] net/sfc: implement EF100 native Tx datapath Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 18/36] net/sfc: support multi-segment transmit for EF100 datapath Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 19/36] net/sfc: support TCP and UDP checksum offloads for EF100 Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 20/36] net/sfc: support IPv4 header checksum offload for EF100 Tx Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 21/36] net/sfc: add header segments check for EF100 Tx datapath Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 22/36] net/sfc: support tunnels for EF100 native " Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 23/36] net/sfc: support TSO for EF100 native datapath Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 24/36] net/sfc: support tunnel TSO for EF100 native Tx datapath Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 25/36] net/sfc: support Tx VLAN insertion offload for EF100 Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 26/36] net/sfc: support Rx checksum " Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 27/36] common/sfc_efx/base: simplify to request Rx prefix fields Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 28/36] common/sfc_efx/base: provide control to deliver RSS hash Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 29/36] common/sfc_efx/base: provide helper to check Rx prefix Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 30/36] net/sfc: map Rx offload RSS hash to corresponding RxQ flag Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 31/36] net/sfc: support per-queue Rx prefix for EF100 Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 32/36] net/sfc: support per-queue Rx RSS hash offload " Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 33/36] net/sfc: support user mark and flag Rx " Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 34/36] net/sfc: forward function control window offset to datapath Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 35/36] net/sfc: add Rx interrupts support for EF100 Andrew Rybchenko
2020-10-13 13:45 ` [dpdk-dev] [PATCH 36/36] doc: advertise Alveo SN1000 SmartNICs family support Andrew Rybchenko
2020-10-14 10:41 ` Ferruh Yigit
2020-10-14 11:15 ` Andrew Rybchenko
2020-10-14 10:41 ` [dpdk-dev] [PATCH 00/36] net/sfc: add EF100 support Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1602596753-32282-1-git-send-email-arybchenko@solarflare.com \
--to=arybchenko@solarflare.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).