From: Konstantin Ananyev <konstantin.ananyev@huawei.com>
To: Wathsala Wathawana Vithanage <wathsala.vithanage@arm.com>,
"Honnappa Nagarahalli" <Honnappa.Nagarahalli@arm.com>,
"konstantin.v.ananyev@yandex.ru" <konstantin.v.ananyev@yandex.ru>,
"thomas@monjalon.net" <thomas@monjalon.net>,
Ruifeng Wang <Ruifeng.Wang@arm.com>
Cc: "dev@dpdk.org" <dev@dpdk.org>, nd <nd@arm.com>,
Justin He <Justin.He@arm.com>, nd <nd@arm.com>
Subject: RE: [RFC] ring: further performance improvements with C11
Date: Wed, 9 Aug 2023 18:18:39 +0000 [thread overview]
Message-ID: <184a99eee3bf41f1ace54273678565fb@huawei.com> (raw)
In-Reply-To: <DB5PR08MB100223D72EB8F13B1502B55FC9F09A@DB5PR08MB10022.eurprd08.prod.outlook.com>
> > > For improved performance over the current C11 based ring
> > > implementation following changes were made.
> > > (1) Replace tail store with RELEASE semantics in
> > > __rte_ring_update_tail with a RELEASE fence. Replace load of the tail
> > > with ACQUIRE semantics in __rte_ring_move_prod_head and
> > > __rte_ring_move_cons_head with ACQUIRE fences.
> > > (2) Remove ACQUIRE fences between load of the old_head and load of the
> > > cons_tail in __rte_ring_move_prod_head and __rte_ring_move_cons_head.
> > > These two fences are not required for the safety of the ring library.
> >
> > Hmm... with these changes, aren't we re-introducing the old bug fixed by this
> > commit:
>
> Cover letter explains why this barrier does not solve what it intends to solve and
> Why it should not matter.
> https://mails.dpdk.org/archives/dev/2023-June/270874.html
Ok, let's consider the case similar to yours (i), but when r->prod.head was moved for distance greater then r->capacity.
To be more specific, let' start with the same initial state:
capacity = 32
r->cons.tail = 5
r->cons.head = 5
r->prod.head = 10
r-prod.tail = 10
time 0, thread1:
/* re-ordered load */
const_tail = r->cons.tail; //= 5
Now, thread1 was stalled for a bit, meanwhile there were few enqueue/dequeus
done by other threads, so current state of the ring:
r->cons.tail = 105
r->cons.head = 105
r->prod.head = 110
r-prod.tail = 110
time 1, thread1:
old_head = r->prod.head; // 110
*free_entries = (capacity + cons_tail - old_head); // = (uint32_t)(32 + 5 - 110) == (uint32_t)-73 == 4294967223
So, free_entries value is way too big, and that comparison:
if (unlikely(n > *free_entries))
might provide wrong result.
So I still think we do need some sort of _read_fence_ between these two loads.
As I said before, that looks exactly like the old bug, fixed a while ago:
http://git.dpdk.org/dpdk/commit/?id=9bc2cbb007c0a3335c5582357ae9f6d37ea0b654
but now re-introduced for C11 case.
> >
> > commit 9bc2cbb007c0a3335c5582357ae9f6d37ea0b654
> > Author: Jia He <justin.he@arm.com>
> > Date: Fri Nov 10 03:30:42 2017 +0000
> >
> > ring: guarantee load/load order in enqueue and dequeue
> >
> > We watched a rte panic of mbuf_autotest in our qualcomm arm64 server
> > (Amberwing).
> >
> > Root cause:
> > In __rte_ring_move_cons_head()
> > ...
> > do {
> > /* Restore n as it may change every loop */
> > n = max;
> >
> > *old_head = r->cons.head; //1st load
> > const uint32_t prod_tail = r->prod.tail; //2nd load
> >
> > In weak memory order architectures (powerpc,arm), the 2nd load might be
> > reodered before the 1st load, that makes *entries is bigger than we wanted.
> > This nasty reording messed enque/deque up.
> > ....
> > ?
> >
> > >
> > > Signed-off-by: Wathsala Vithanage <wathsala.vithanage@arm.com>
> > > Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
> > > Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
> > > ---
> > > .mailmap | 1 +
> > > lib/ring/rte_ring_c11_pvt.h | 35 ++++++++++++++++++++---------------
> > > 2 files changed, 21 insertions(+), 15 deletions(-)
> > >
> > > diff --git a/.mailmap b/.mailmap
> > > index 4018f0fc47..367115d134 100644
> > > --- a/.mailmap
> > > +++ b/.mailmap
> > > @@ -1430,6 +1430,7 @@ Walter Heymans
> > <walter.heymans@corigine.com>
> > > Wang Sheng-Hui <shhuiw@gmail.com> Wangyu (Eric)
> > > <seven.wangyu@huawei.com> Waterman Cao <waterman.cao@intel.com>
> > > +Wathsala Vithanage <wathsala.vithanage@arm.com>
> > > Weichun Chen <weichunx.chen@intel.com> Wei Dai <wei.dai@intel.com>
> > > Weifeng Li <liweifeng96@126.com> diff --git
> > > a/lib/ring/rte_ring_c11_pvt.h b/lib/ring/rte_ring_c11_pvt.h index
> > > f895950df4..63fe58ce9e 100644
> > > --- a/lib/ring/rte_ring_c11_pvt.h
> > > +++ b/lib/ring/rte_ring_c11_pvt.h
> > > @@ -16,6 +16,13 @@ __rte_ring_update_tail(struct rte_ring_headtail *ht,
> > uint32_t old_val,
> > > uint32_t new_val, uint32_t single, uint32_t enqueue) {
> > > RTE_SET_USED(enqueue);
> > > + /*
> > > + * Updating of ht->tail cannot happen before elements are added to or
> > > + * removed from the ring, as it could result in data races between
> > > + * producer and consumer threads. Therefore we need a release
> > > + * barrier here.
> > > + */
> > > + rte_atomic_thread_fence(__ATOMIC_RELEASE);
> > >
> > > /*
> > > * If there are other enqueues/dequeues in progress that preceded
> > > us, @@ -24,7 +31,7 @@ __rte_ring_update_tail(struct rte_ring_headtail
> > *ht, uint32_t old_val,
> > > if (!single)
> > > rte_wait_until_equal_32(&ht->tail, old_val,
> > __ATOMIC_RELAXED);
> > >
> > > - __atomic_store_n(&ht->tail, new_val, __ATOMIC_RELEASE);
> > > + __atomic_store_n(&ht->tail, new_val, __ATOMIC_RELAXED);
> > > }
> > >
> > > /**
> > > @@ -66,14 +73,8 @@ __rte_ring_move_prod_head(struct rte_ring *r,
> > unsigned int is_sp,
> > > /* Reset n to the initial burst count */
> > > n = max;
> > >
> > > - /* Ensure the head is read before tail */
> > > - __atomic_thread_fence(__ATOMIC_ACQUIRE);
> > > -
> > > - /* load-acquire synchronize with store-release of ht->tail
> > > - * in update_tail.
> > > - */
> > > cons_tail = __atomic_load_n(&r->cons.tail,
> > > - __ATOMIC_ACQUIRE);
> > > + __ATOMIC_RELAXED);
> > >
> > > /* The subtraction is done between two unsigned 32bits value
> > > * (the result is always modulo 32 bits even if we have @@ -
> > 100,6
> > > +101,11 @@ __rte_ring_move_prod_head(struct rte_ring *r, unsigned int
> > is_sp,
> > > 0, __ATOMIC_RELAXED,
> > > __ATOMIC_RELAXED);
> > > } while (unlikely(success == 0));
> > > + /*
> > > + * Ensure that updates to the ring doesn't rise above
> > > + * load of the new_head in SP and MP cases.
> > > + */
> > > + rte_atomic_thread_fence(__ATOMIC_ACQUIRE);
> > > return n;
> > > }
> > >
> > > @@ -142,14 +148,8 @@ __rte_ring_move_cons_head(struct rte_ring *r, int
> > is_sc,
> > > /* Restore n as it may change every loop */
> > > n = max;
> > >
> > > - /* Ensure the head is read before tail */
> > > - __atomic_thread_fence(__ATOMIC_ACQUIRE);
> > > -
> > > - /* this load-acquire synchronize with store-release of ht->tail
> > > - * in update_tail.
> > > - */
> > > prod_tail = __atomic_load_n(&r->prod.tail,
> > > - __ATOMIC_ACQUIRE);
> > > + __ATOMIC_RELAXED);
> > >
> > > /* The subtraction is done between two unsigned 32bits value
> > > * (the result is always modulo 32 bits even if we have @@ -
> > 175,6
> > > +175,11 @@ __rte_ring_move_cons_head(struct rte_ring *r, int is_sc,
> > > 0,
> > __ATOMIC_RELAXED,
> > > __ATOMIC_RELAXED);
> > > } while (unlikely(success == 0));
> > > + /*
> > > + * Ensure that updates to the ring doesn't rise above
> > > + * load of the new_head in SP and MP cases.
> > > + */
> > > + rte_atomic_thread_fence(__ATOMIC_ACQUIRE);
> > > return n;
> > > }
> > >
> > > --
> > > 2.25.1
> > >
next prev parent reply other threads:[~2023-08-09 18:18 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-15 20:13 [RFC] ring: Further " Wathsala Vithanage
2023-06-15 20:13 ` [RFC] ring: further " Wathsala Vithanage
2023-07-31 12:31 ` Thomas Monjalon
2023-08-03 2:56 ` Honnappa Nagarahalli
2023-08-02 9:42 ` Konstantin Ananyev
2023-08-04 22:50 ` Wathsala Wathawana Vithanage
2023-08-09 18:18 ` Konstantin Ananyev [this message]
2023-08-15 5:14 ` Honnappa Nagarahalli
2023-08-21 13:27 ` Konstantin Ananyev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=184a99eee3bf41f1ace54273678565fb@huawei.com \
--to=konstantin.ananyev@huawei.com \
--cc=Honnappa.Nagarahalli@arm.com \
--cc=Justin.He@arm.com \
--cc=Ruifeng.Wang@arm.com \
--cc=dev@dpdk.org \
--cc=konstantin.v.ananyev@yandex.ru \
--cc=nd@arm.com \
--cc=thomas@monjalon.net \
--cc=wathsala.vithanage@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).