DPDK patches and discussions
 help / color / mirror / Atom feed
From: Thomas Monjalon <thomas@monjalon.net>
To: dev@dpdk.org, olivier.matz@6wind.com, bruce.richardson@intel.com
Cc: Ray Zhang <zhanglei002@gmail.com>
Subject: Re: [dpdk-dev] [PATCH v1] net: support PPPOE in software packet type parser
Date: Tue, 16 May 2017 22:47:03 +0200	[thread overview]
Message-ID: <1958581.a6L38vVbnc@xps> (raw)
In-Reply-To: <1491560817-3558-1-git-send-email-skytap@host-1.skytap.example>

Any volunteer to review this patch, please?

07/04/2017 12:26, Ray Zhang:
> From: Ray Zhang <zhanglei002@gmail.com>
> 
> Add a new RTE_PTYPE_L2_ETHER_PPPOE and its support in
> rte_net_get_ptype()
> 
> Signed-off-by: Ray Zhang <zhanglei002@gmail.com>
> ---
> 
> Resend the patch
> 
>  lib/librte_mbuf/rte_mbuf_ptype.h |  7 +++++++
>  lib/librte_net/rte_ether.h       | 12 ++++++++++++
>  lib/librte_net/rte_net.c         | 19 +++++++++++++++++++
>  3 files changed, 38 insertions(+)
> 
> diff --git a/lib/librte_mbuf/rte_mbuf_ptype.h b/lib/librte_mbuf/rte_mbuf_ptype.h
> index ff6de9d..7dd03de 100644
> --- a/lib/librte_mbuf/rte_mbuf_ptype.h
> +++ b/lib/librte_mbuf/rte_mbuf_ptype.h
> @@ -150,6 +150,13 @@
>   */
>  #define RTE_PTYPE_L2_ETHER_QINQ             0x00000007
>  /**
> + * PPPOE packet type.
> + *
> + * Packet format:
> + * <'ether type'=[0x8864]>
> + */
> +#define RTE_PTYPE_L2_ETHER_PPPOE            0x00000008
> +/**
>   * Mask of layer 2 packet types.
>   * It is used for outer packet for tunneling cases.
>   */
> diff --git a/lib/librte_net/rte_ether.h b/lib/librte_net/rte_ether.h
> index ff3d065..d76edb3 100644
> --- a/lib/librte_net/rte_ether.h
> +++ b/lib/librte_net/rte_ether.h
> @@ -323,12 +323,24 @@ struct vxlan_hdr {
>  	uint32_t vx_vni;   /**< VNI (24) + Reserved (8). */
>  } __attribute__((__packed__));
>  
> +/**
> + * PPPOE protocol header
> + */
> +struct pppoe_hdr {
> +	uint8_t  type_ver;
> +	uint8_t  code;
> +	uint16_t sid;
> +	uint16_t length;
> +	uint16_t proto;
> +} __attribute__((packed));
> +
>  /* Ethernet frame types */
>  #define ETHER_TYPE_IPv4 0x0800 /**< IPv4 Protocol. */
>  #define ETHER_TYPE_IPv6 0x86DD /**< IPv6 Protocol. */
>  #define ETHER_TYPE_ARP  0x0806 /**< Arp Protocol. */
>  #define ETHER_TYPE_RARP 0x8035 /**< Reverse Arp Protocol. */
>  #define ETHER_TYPE_VLAN 0x8100 /**< IEEE 802.1Q VLAN tagging. */
> +#define ETHER_TYPE_PPPOE 0x8864 /**< PPPoE Protocol */
>  #define ETHER_TYPE_QINQ 0x88A8 /**< IEEE 802.1ad QinQ tagging. */
>  #define ETHER_TYPE_1588 0x88F7 /**< IEEE 802.1AS 1588 Precise Time Protocol. */
>  #define ETHER_TYPE_SLOW 0x8809 /**< Slow protocols (LACP and Marker). */
> diff --git a/lib/librte_net/rte_net.c b/lib/librte_net/rte_net.c
> index a8c7aff..439c2f6 100644
> --- a/lib/librte_net/rte_net.c
> +++ b/lib/librte_net/rte_net.c
> @@ -302,6 +302,25 @@ uint32_t rte_net_get_ptype(const struct rte_mbuf *m,
>  		off += 2 * sizeof(*vh);
>  		hdr_lens->l2_len += 2 * sizeof(*vh);
>  		proto = vh->eth_proto;
> +	} else if (proto == rte_cpu_to_be_16(ETHER_TYPE_PPPOE)) {
> +		const struct pppoe_hdr *ph;
> +		struct pppoe_hdr ph_copy;
> +
> +		pkt_type = RTE_PTYPE_L2_ETHER_PPPOE;
> +		ph = rte_pktmbuf_read(m, off, sizeof(*ph), &ph_copy);
> +		if (unlikely(ph == NULL))
> +			return pkt_type;
> +
> +		off += sizeof(*ph);
> +		hdr_lens->l2_len += sizeof(*ph);
> +		if (ph->code != 0) /* Not Seesion Data */
> +			return pkt_type;
> +		if (ph->proto == rte_cpu_to_be_16(0x21))
> +			proto = rte_cpu_to_be_16(ETHER_TYPE_IPv4);
> +		else if (ph->proto == rte_cpu_to_be_16(0x57))
> +			proto = rte_cpu_to_be_16(ETHER_TYPE_IPv6);
> +		else
> +			return pkt_type;
>  	}

  reply	other threads:[~2017-05-16 20:47 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-07  9:59 [dpdk-dev] [PATCH] " skytap
2017-04-07 10:12 ` Thomas Monjalon
2017-04-07 10:26 ` [dpdk-dev] [PATCH v1] " Ray Zhang
2017-05-16 20:47   ` Thomas Monjalon [this message]
2017-05-17 12:20     ` Chilikin, Andrey

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1958581.a6L38vVbnc@xps \
    --to=thomas@monjalon.net \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=olivier.matz@6wind.com \
    --cc=zhanglei002@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).