From: Bruce Richardson <bruce.richardson@intel.com>
To: John McNamara <john.mcnamara@intel.com>
Cc: dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH v4 2/3] ethdev: add optional rxtx callback support
Date: Fri, 20 Feb 2015 10:06:00 +0000 [thread overview]
Message-ID: <20150220100600.GA17276@bricha3-MOBL3> (raw)
In-Reply-To: <1424368602-30826-3-git-send-email-john.mcnamara@intel.com>
On Thu, Feb 19, 2015 at 05:56:41PM +0000, John McNamara wrote:
> From: Richardson, Bruce <bruce.richardson@intel.com>
>
> Add optional support for inline processing of packets inside the RX
> or TX call. For an RX callback, what happens is that we get a set of
> packets from the NIC and then pass them to a callback function, if
> configured, to allow additional processing to be done on them, e.g.
> filling in more mbuf fields, before passing back to the application.
> On TX, the packets are similarly post-processed before being handed
> to the NIC for transmission.
>
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> Signed-off-by: John McNamara <john.mcnamara@intel.com>
> ---
> config/common_bsdapp | 1 +
> config/common_linuxapp | 1 +
> lib/librte_ether/rte_ethdev.c | 192 +++++++++++++++++++++++++++++-
> lib/librte_ether/rte_ethdev.h | 204 +++++++++++++++++++++++++++++++-
> lib/librte_ether/rte_ether_version.map | 4 +
> 5 files changed, 397 insertions(+), 5 deletions(-)
>
> diff --git a/config/common_bsdapp b/config/common_bsdapp
> index f11ff39..e9c445e 100644
> --- a/config/common_bsdapp
> +++ b/config/common_bsdapp
> @@ -133,6 +133,7 @@ CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
> CONFIG_RTE_MAX_ETHPORTS=32
> CONFIG_RTE_LIBRTE_IEEE1588=n
> CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
> +CONFIG_RTE_LIBRTE_ETHDEV_RXTX_CALLBACKS=n
I no reason why this should not be "y" by default. Those who are not using it
and don't want the tiny performance impact of it, can turn it off.
/Bruce
>
> #
> # Support NIC bypass logic
> diff --git a/config/common_linuxapp b/config/common_linuxapp
> index f921d8c..0cb850e 100644
> --- a/config/common_linuxapp
> +++ b/config/common_linuxapp
> @@ -131,6 +131,7 @@ CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
> CONFIG_RTE_MAX_ETHPORTS=32
> CONFIG_RTE_LIBRTE_IEEE1588=n
> CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
> +CONFIG_RTE_LIBRTE_ETHDEV_RXTX_CALLBACKS=n
>
> #
> # Support NIC bypass logic
> diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
> index 7c4e772..8a4e0e7 100644
> --- a/lib/librte_ether/rte_ethdev.c
> +++ b/lib/librte_ether/rte_ethdev.c
> @@ -337,6 +337,20 @@ rte_eth_dev_rx_queue_config(struct rte_eth_dev *dev, uint16_t nb_queues)
> dev->data->nb_rx_queues = 0;
> return -(ENOMEM);
> }
> +
> +#ifdef RTE_LIBRTE_ETHDEV_RXTX_CALLBACKS
> + dev->post_rx_burst_cbs = rte_zmalloc(
> + "ethdev->post_rx_burst_cbs",
> + sizeof(*dev->post_rx_burst_cbs) * nb_queues,
> + RTE_CACHE_LINE_SIZE);
> + if (dev->post_rx_burst_cbs == NULL) {
> + rte_free(dev->data->rx_queues);
> + dev->data->rx_queues = NULL;
> + dev->data->nb_rx_queues = 0;
> + return -(ENOMEM);
> + }
> +#endif
> +
> } else { /* re-configure */
> FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_release, -ENOTSUP);
>
> @@ -349,9 +363,25 @@ rte_eth_dev_rx_queue_config(struct rte_eth_dev *dev, uint16_t nb_queues)
> if (rxq == NULL)
> return -(ENOMEM);
>
> - if (nb_queues > old_nb_queues)
> +#ifdef RTE_LIBRTE_ETHDEV_RXTX_CALLBACKS
> + dev->post_rx_burst_cbs = rte_realloc(
> + dev->post_rx_burst_cbs,
> + sizeof(*dev->post_rx_burst_cbs) *
> + nb_queues, RTE_CACHE_LINE_SIZE);
> + if (dev->post_rx_burst_cbs == NULL)
> + return -(ENOMEM);
> +#endif
> +
> + if (nb_queues > old_nb_queues) {
> + uint16_t new_qs = nb_queues - old_nb_queues;
> memset(rxq + old_nb_queues, 0,
> - sizeof(rxq[0]) * (nb_queues - old_nb_queues));
> + sizeof(rxq[0]) * new_qs);
> +
> +#ifdef RTE_LIBRTE_ETHDEV_RXTX_CALLBACKS
> + memset(dev->post_rx_burst_cbs + old_nb_queues, 0,
> + sizeof(dev->post_rx_burst_cbs[0]) * new_qs);
> +#endif
> + }
>
> dev->data->rx_queues = rxq;
>
> @@ -479,6 +509,20 @@ rte_eth_dev_tx_queue_config(struct rte_eth_dev *dev, uint16_t nb_queues)
> dev->data->nb_tx_queues = 0;
> return -(ENOMEM);
> }
> +
> +#ifdef RTE_LIBRTE_ETHDEV_RXTX_CALLBACKS
> + dev->pre_tx_burst_cbs = rte_zmalloc(
> + "ethdev->pre_tx_burst_cbs",
> + sizeof(*dev->pre_tx_burst_cbs) * nb_queues,
> + RTE_CACHE_LINE_SIZE);
> + if (dev->pre_tx_burst_cbs == NULL) {
> + rte_free(dev->data->tx_queues);
> + dev->data->tx_queues = NULL;
> + dev->data->nb_tx_queues = 0;
> + return -(ENOMEM);
> + }
> +#endif
> +
> } else { /* re-configure */
> FUNC_PTR_OR_ERR_RET(*dev->dev_ops->tx_queue_release, -ENOTSUP);
>
> @@ -491,9 +535,25 @@ rte_eth_dev_tx_queue_config(struct rte_eth_dev *dev, uint16_t nb_queues)
> if (txq == NULL)
> return -(ENOMEM);
>
> - if (nb_queues > old_nb_queues)
> +#ifdef RTE_LIBRTE_ETHDEV_RXTX_CALLBACKS
> + dev->pre_tx_burst_cbs = rte_realloc(
> + dev->pre_tx_burst_cbs,
> + sizeof(*dev->pre_tx_burst_cbs) *
> + nb_queues, RTE_CACHE_LINE_SIZE);
> + if (dev->pre_tx_burst_cbs == NULL)
> + return -(ENOMEM);
> +#endif
> +
> + if (nb_queues > old_nb_queues) {
> + uint16_t new_qs = nb_queues - old_nb_queues;
> memset(txq + old_nb_queues, 0,
> - sizeof(txq[0]) * (nb_queues - old_nb_queues));
> + sizeof(txq[0]) * new_qs);
> +
> +#ifdef RTE_LIBRTE_ETHDEV_RXTX_CALLBACKS
> + memset(dev->pre_tx_burst_cbs + old_nb_queues, 0,
> + sizeof(dev->pre_tx_burst_cbs[0]) * new_qs);
> +#endif
> + }
>
> dev->data->tx_queues = txq;
>
> @@ -3258,3 +3318,127 @@ rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type,
> FUNC_PTR_OR_ERR_RET(*dev->dev_ops->filter_ctrl, -ENOTSUP);
> return (*dev->dev_ops->filter_ctrl)(dev, filter_type, filter_op, arg);
> }
> +
> +#ifdef RTE_LIBRTE_ETHDEV_RXTX_CALLBACKS
> +void *
> +rte_eth_add_rx_callback(uint8_t port_id, uint16_t queue_id,
> + rte_rxtx_callback_fn fn, void *user_param)
> +{
> + /* check input parameters */
> + if (port_id >= nb_ports || fn == NULL ||
> + queue_id >= rte_eth_devices[port_id].data->nb_rx_queues) {
> + rte_errno = EINVAL;
> + return NULL;
> + }
> +
> + struct rte_eth_rxtx_callback *cb = rte_zmalloc(NULL, sizeof(*cb), 0);
> +
> + if (cb == NULL) {
> + rte_errno = ENOMEM;
> + return NULL;
> + }
> +
> + cb->fn = fn;
> + cb->param = user_param;
> + cb->next = rte_eth_devices[port_id].post_rx_burst_cbs[queue_id];
> + rte_eth_devices[port_id].post_rx_burst_cbs[queue_id] = cb;
> + return cb;
> +}
> +
> +void *
> +rte_eth_add_tx_callback(uint8_t port_id, uint16_t queue_id,
> + rte_rxtx_callback_fn fn, void *user_param)
> +{
> + /* check input parameters */
> + if (port_id >= nb_ports || fn == NULL ||
> + queue_id >= rte_eth_devices[port_id].data->nb_tx_queues) {
> + rte_errno = EINVAL;
> + return NULL;
> + }
> +
> + struct rte_eth_rxtx_callback *cb = rte_zmalloc(NULL, sizeof(*cb), 0);
> +
> + if (cb == NULL) {
> + rte_errno = ENOMEM;
> + return NULL;
> + }
> +
> + cb->fn = fn;
> + cb->param = user_param;
> + cb->next = rte_eth_devices[port_id].pre_tx_burst_cbs[queue_id];
> + rte_eth_devices[port_id].pre_tx_burst_cbs[queue_id] = cb;
> + return cb;
> +}
> +
> +int
> +rte_eth_remove_rx_callback(uint8_t port_id, uint16_t queue_id,
> + struct rte_eth_rxtx_callback *user_cb)
> +{
> + /* Check input parameters. */
> + if (port_id >= nb_ports || user_cb == NULL ||
> + queue_id >= rte_eth_devices[port_id].data->nb_rx_queues) {
> + return (-EINVAL);
> + }
> +
> + struct rte_eth_dev *dev = &rte_eth_devices[port_id];
> + struct rte_eth_rxtx_callback *cb = dev->post_rx_burst_cbs[queue_id];
> + struct rte_eth_rxtx_callback *prev_cb;
> +
> + /* Reset head pointer and remove user cb if first in the list. */
> + if (cb == user_cb) {
> + dev->post_rx_burst_cbs[queue_id] = user_cb->next;
> + return 0;
> + }
> +
> + /* Remove the user cb from the callback list. */
> + do {
> + prev_cb = cb;
> + cb = cb->next;
> +
> + if (cb == user_cb) {
> + prev_cb->next = user_cb->next;
> + return 0;
> + }
> +
> + } while (cb != NULL);
> +
> + /* Callback wasn't found. */
> + return (-EINVAL);
> +}
> +
> +int
> +rte_eth_remove_tx_callback(uint8_t port_id, uint16_t queue_id,
> + struct rte_eth_rxtx_callback *user_cb)
> +{
> + /* Check input parameters. */
> + if (port_id >= nb_ports || user_cb == NULL ||
> + queue_id >= rte_eth_devices[port_id].data->nb_tx_queues) {
> + return (-EINVAL);
> + }
> +
> + struct rte_eth_dev *dev = &rte_eth_devices[port_id];
> + struct rte_eth_rxtx_callback *cb = dev->pre_tx_burst_cbs[queue_id];
> + struct rte_eth_rxtx_callback *prev_cb;
> +
> + /* Reset head pointer and remove user cb if first in the list. */
> + if (cb == user_cb) {
> + dev->pre_tx_burst_cbs[queue_id] = user_cb->next;
> + return 0;
> + }
> +
> + /* Remove the user cb from the callback list. */
> + do {
> + prev_cb = cb;
> + cb = cb->next;
> +
> + if (cb == user_cb) {
> + prev_cb->next = user_cb->next;
> + return 0;
> + }
> +
> + } while (cb != NULL);
> +
> + /* Callback wasn't found. */
> + return (-EINVAL);
> +}
> +#endif /* RTE_LIBRTE_ETHDEV_RXTX_CALLBACKS */
> diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
> index 48e4ac9..f55eeea 100644
> --- a/lib/librte_ether/rte_ethdev.h
> +++ b/lib/librte_ether/rte_ethdev.h
> @@ -1522,6 +1522,49 @@ struct eth_dev_ops {
> eth_filter_ctrl_t filter_ctrl; /**< common filter control*/
> };
>
> +#ifdef RTE_LIBRTE_ETHDEV_RXTX_CALLBACKS
> +/**
> + * Function type used for callbacks for processing packets on RX and TX
> + *
> + * If configured for RX, it is called with a burst of packets that have just
> + * been received on the given port and queue. On TX, it is called with a burst
> + * of packets immediately before those packets are put onto the hardware queue
> + * for transmission.
> + *
> + * @param port
> + * The ethernet port on which rx or tx is being performed
> + * @param queue
> + * The queue on the ethernet port which is being used to receive or transmit
> + * the packets.
> + * @param pkts
> + * The burst of packets on which processing is to be done. On RX, these
> + * packets have just been received. On TX, they are about to be transmitted.
> + * @param nb_pkts
> + * The number of packets in the burst pointed to by "pkts"
> + * @param user_param
> + * The arbitrary user parameter passed in by the application when the callback
> + * was originally configured.
> + * @return
> + * The number of packets remaining in pkts are processing.
> + * * On RX, this will be returned to the user as the return value from
> + * rte_eth_rx_burst.
> + * * On TX, this will be the number of packets actually written to the NIC.
> + */
> +typedef uint16_t (*rte_rxtx_callback_fn)(uint8_t port, uint16_t queue,
> + struct rte_mbuf *pkts[], uint16_t nb_pkts, void *user_param);
> +
> +/**
> + * @internal
> + * Structure used to hold information about the callbacks to be called for a
> + * queue on RX and TX.
> + */
> +struct rte_eth_rxtx_callback {
> + struct rte_eth_rxtx_callback *next;
> + rte_rxtx_callback_fn fn;
> + void *param;
> +};
> +#endif
> +
> /**
> * @internal
> * The generic data structure associated with each ethernet device.
> @@ -1539,7 +1582,22 @@ struct rte_eth_dev {
> const struct eth_driver *driver;/**< Driver for this device */
> struct eth_dev_ops *dev_ops; /**< Functions exported by PMD */
> struct rte_pci_device *pci_dev; /**< PCI info. supplied by probing */
> - struct rte_eth_dev_cb_list link_intr_cbs; /**< User application callbacks on interrupt*/
> + /** User application callbacks for NIC interrupts */
> + struct rte_eth_dev_cb_list link_intr_cbs;
> +
> +#ifdef RTE_LIBRTE_ETHDEV_RXTX_CALLBACKS
> + /**
> + * User-supplied functions called from rx_burst to post-process
> + * received packets before passing them to the user
> + */
> + struct rte_eth_rxtx_callback **post_rx_burst_cbs;
> +
> + /**
> + * User-supplied functions called from tx_burst to pre-process
> + * received packets before passing them to the driver for transmission.
> + */
> + struct rte_eth_rxtx_callback **pre_tx_burst_cbs;
> +#endif
> };
>
> struct rte_eth_dev_sriov {
> @@ -2393,7 +2451,23 @@ rte_eth_rx_burst(uint8_t port_id, uint16_t queue_id,
> struct rte_eth_dev *dev;
>
> dev = &rte_eth_devices[port_id];
> +
> +#ifndef RTE_LIBRTE_ETHDEV_RXTX_CALLBACKS
> return (*dev->rx_pkt_burst)(dev->data->rx_queues[queue_id], rx_pkts, nb_pkts);
> +#else
> + nb_pkts = (*dev->rx_pkt_burst)(dev->data->rx_queues[queue_id], rx_pkts,
> + nb_pkts);
> + struct rte_eth_rxtx_callback *cb = dev->post_rx_burst_cbs[queue_id];
> +
> + if (unlikely(cb != NULL)) {
> + do {
> + nb_pkts = cb->fn(port_id, queue_id, rx_pkts, nb_pkts,
> + cb->param);
> + cb = cb->next;
> + } while (cb != NULL);
> + }
> + return nb_pkts;
> +#endif
> }
> #endif
>
> @@ -2520,6 +2594,17 @@ rte_eth_tx_burst(uint8_t port_id, uint16_t queue_id,
> struct rte_eth_dev *dev;
>
> dev = &rte_eth_devices[port_id];
> +#ifdef RTE_LIBRTE_ETHDEV_RXTX_CALLBACKS
> + struct rte_eth_rxtx_callback *cb = dev->pre_tx_burst_cbs[queue_id];
> +
> + if (unlikely(cb != NULL)) {
> + do {
> + nb_pkts = cb->fn(port_id, queue_id, tx_pkts, nb_pkts,
> + cb->param);
> + cb = cb->next;
> + } while (cb != NULL);
> + }
> +#endif
> return (*dev->tx_pkt_burst)(dev->data->tx_queues[queue_id], tx_pkts, nb_pkts);
> }
> #endif
> @@ -3667,6 +3752,123 @@ int rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_ty
> int rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type,
> enum rte_filter_op filter_op, void *arg);
>
> +#ifdef RTE_LIBRTE_ETHDEV_RXTX_CALLBACKS
> +/**
> + * Add a callback to be called on packet RX on a given port and queue.
> + *
> + * This API configures a function to be called for each burst of
> + * packets received on a given NIC port queue. The return value is a pointer
> + * that can be used to later remove the callback using
> + * rte_eth_remove_rx_callback().
> + *
> + * @param port_id
> + * The port identifier of the Ethernet device.
> + * @param queue_id
> + * The queue on the Ethernet device on which the callback is to be added.
> + * @param fn
> + * The callback function
> + * @param user_param
> + * A generic pointer parameter which will be passed to each invocation of the
> + * callback function on this port and queue.
> + *
> + * @return
> + * NULL on error.
> + * On success, a pointer value which can later be used to remove the callback.
> + */
> +void *rte_eth_add_rx_callback(uint8_t port_id, uint16_t queue_id,
> + rte_rxtx_callback_fn fn, void *user_param);
> +
> +/**
> + * Add a callback to be called on packet TX on a given port and queue.
> + *
> + * This API configures a function to be called for each burst of
> + * packets sent on a given NIC port queue. The return value is a pointer
> + * that can be used to later remove the callback using
> + * rte_eth_remove_tx_callback().
> + *
> + * @param port_id
> + * The port identifier of the Ethernet device.
> + * @param queue_id
> + * The queue on the Ethernet device on which the callback is to be added.
> + * @param fn
> + * The callback function
> + * @param user_param
> + * A generic pointer parameter which will be passed to each invocation of the
> + * callback function on this port and queue.
> + *
> + * @return
> + * NULL on error.
> + * On success, a pointer value which can later be used to remove the callback.
> + */
> +void *rte_eth_add_tx_callback(uint8_t port_id, uint16_t queue_id,
> + rte_rxtx_callback_fn fn, void *user_param);
> +
> +/**
> + * Remove an RX packet callback from a given port and queue.
> + *
> + * This function is used to removed callbacks that were added to a NIC port
> + * queue using rte_eth_add_rx_callback().
> + *
> + * Note: the callback is removed from the callback list but it isn't freed
> + * since the it may still be in use. The memory for the callback can be
> + * subsequently freed back by the application by calling rte_free():
> + *
> + * - Immediately - if the port is stopped, or the user knows that no
> + * callbacks are in flight e.g. if called from the thread doing RX/TX
> + * on that queue.
> + *
> + * - After a short delay - where the delay is sufficient to allow any
> + * in-flight callbacks to complete.
> + *
> + * @param port_id
> + * The port identifier of the Ethernet device.
> + * @param queue_id
> + * The queue on the Ethernet device from which the callback is to be removed.
> + * @param user_cb
> + * User supplied callback created via rte_eth_add_rx_callback().
> + *
> + * @return
> + * - 0: Success. Callback was removed.
> + * - -EINVAL: The port_id or the queue_id is out of range, or the callback is
> + * NULL or not found for the port/queue.
> + */
> +int rte_eth_remove_rx_callback(uint8_t port_id, uint16_t queue_id,
> + struct rte_eth_rxtx_callback *user_cb);
> +
> +/**
> + * Remove a TX packet callback from a given port and queue.
> + *
> + * This function is used to removed callbacks that were added to a NIC port
> + * queue using rte_eth_add_tx_callback().
> + *
> + * Note: the callback is removed from the callback list but it isn't freed
> + * since the it may still be in use. The memory for the callback can be
> + * subsequently freed back by the application by calling rte_free():
> + *
> + * - Immediately - if the port is stopped, or the user knows that no
> + * callbacks are in flight e.g. if called from the thread doing RX/TX
> + * on that queue.
> + *
> + * - After a short delay - where the delay is sufficient to allow any
> + * in-flight callbacks to complete.
> + *
> + * @param port_id
> + * The port identifier of the Ethernet device.
> + * @param queue_id
> + * The queue on the Ethernet device from which the callback is to be removed.
> + * @param user_cb
> + * User supplied callback created via rte_eth_add_tx_callback().
> + *
> + * @return
> + * - 0: Success. Callback was removed.
> + * - -EINVAL: The port_id or the queue_id is out of range, or the callback is
> + * NULL or not found for the port/queue.
> + */
> +int rte_eth_remove_tx_callback(uint8_t port_id, uint16_t queue_id,
> + struct rte_eth_rxtx_callback *user_cb);
> +
> +#endif /* RTE_LIBRTE_ETHDEV_RXTX_CALLBACKS */
> +
> #ifdef __cplusplus
> }
> #endif
> diff --git a/lib/librte_ether/rte_ether_version.map b/lib/librte_ether/rte_ether_version.map
> index 7316530..3227cda 100644
> --- a/lib/librte_ether/rte_ether_version.map
> +++ b/lib/librte_ether/rte_ether_version.map
> @@ -2,6 +2,8 @@ DPDK_2.0 {
> global:
>
> _rte_eth_dev_callback_process;
> + rte_eth_add_rx_callback;
> + rte_eth_add_tx_callback;
> rte_eth_allmulticast_disable;
> rte_eth_allmulticast_enable;
> rte_eth_allmulticast_get;
> @@ -96,6 +98,8 @@ DPDK_2.0 {
> rte_eth_promiscuous_disable;
> rte_eth_promiscuous_enable;
> rte_eth_promiscuous_get;
> + rte_eth_remove_rx_callback;
> + rte_eth_remove_tx_callback;
> rte_eth_rx_burst;
> rte_eth_rx_descriptor_done;
> rte_eth_rx_queue_count;
> --
> 1.7.4.1
>
next prev parent reply other threads:[~2015-02-20 10:06 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-22 16:47 [dpdk-dev] [PATCH RFC 0/3] DPDK ethdev " Bruce Richardson
2014-12-22 16:47 ` [dpdk-dev] [PATCH RFC 1/3] ethdev: rename callbacks field to intr_cbs Bruce Richardson
2014-12-22 16:47 ` [dpdk-dev] [PATCH RFC 2/3] ethdev: Add in data rxtx callback support Bruce Richardson
2014-12-22 16:47 ` [dpdk-dev] [PATCH RFC 3/3] examples: example showing use of callbacks Bruce Richardson
2014-12-22 17:02 ` [dpdk-dev] [PATCH RFC 0/3] DPDK ethdev callback support Thomas Monjalon
2014-12-22 17:33 ` Bruce Richardson
2014-12-22 17:47 ` Neil Horman
2014-12-23 9:28 ` Bruce Richardson
2014-12-23 13:09 ` Neil Horman
2014-12-23 14:09 ` Bruce Richardson
2015-01-05 16:17 ` Bruce Richardson
2014-12-22 18:31 ` Stephen Hemminger
2014-12-23 9:29 ` Bruce Richardson
2014-12-23 4:23 ` Vithal S Mohare
2014-12-23 9:30 ` Bruce Richardson
2014-12-23 9:37 ` Vithal S Mohare
2014-12-24 1:43 ` Zhang, Helin
2014-12-24 5:06 ` Qiu, Michael
2015-02-12 19:57 ` [dpdk-dev] [PATCH " John McNamara
2015-02-12 19:57 ` [dpdk-dev] [PATCH 1/3] ethdev: rename callbacks field to intr_cbs John McNamara
2015-02-12 19:57 ` [dpdk-dev] [PATCH 2/3] ethdev: Add in data rxtx callback support John McNamara
2015-02-12 21:12 ` Neil Horman
2015-02-12 19:57 ` [dpdk-dev] [PATCH 3/3] examples: example showing use of callbacks John McNamara
2015-02-13 14:54 ` [dpdk-dev] [PATCH 0/3] DPDK ethdev callback support Declan Doherty
2015-02-13 15:39 ` [dpdk-dev] [PATCH v2 0/4] " John McNamara
2015-02-13 15:39 ` [dpdk-dev] [PATCH v2 1/4] ethdev: rename callbacks field to intr_cbs John McNamara
2015-02-13 16:06 ` Thomas Monjalon
2015-02-13 16:52 ` Thomas Monjalon
2015-02-13 15:39 ` [dpdk-dev] [PATCH v2 2/4] ethdev: Add in data rxtx callback support John McNamara
2015-02-13 16:33 ` Thomas Monjalon
2015-02-13 17:49 ` Bruce Richardson
2015-02-13 15:39 ` [dpdk-dev] [PATCH v2 3/4] examples: example showing use of callbacks John McNamara
2015-02-13 16:02 ` Thomas Monjalon
2015-02-16 14:33 ` Olivier MATZ
2015-02-16 15:16 ` Bruce Richardson
2015-02-16 17:34 ` Thomas Monjalon
2015-02-17 12:17 ` Declan Doherty
2015-02-17 12:25 ` Bruce Richardson
2015-02-17 13:28 ` Olivier MATZ
2015-02-17 13:50 ` Bruce Richardson
2015-02-17 15:49 ` Neil Horman
2015-02-17 16:00 ` Bruce Richardson
2015-02-17 16:08 ` Neil Horman
2015-02-17 16:15 ` Bruce Richardson
2015-02-17 19:27 ` Neil Horman
2015-02-17 15:32 ` Thomas Monjalon
2015-02-17 15:58 ` Bruce Richardson
2015-02-13 15:39 ` [dpdk-dev] [PATCH v2 4/4] abi: Added rxtx callback functions to ABI versioning John McNamara
2015-02-13 15:59 ` Thomas Monjalon
2015-02-13 15:48 ` [dpdk-dev] [PATCH v2 0/4] DPDK ethdev callback support Declan Doherty
2015-02-18 17:42 ` [dpdk-dev] [PATCH v3 0/3] " John McNamara
2015-02-18 17:42 ` [dpdk-dev] [PATCH v3 1/3] ethdev: Rename callbacks field to link_intr_cbs John McNamara
2015-02-18 17:42 ` [dpdk-dev] [PATCH v3 2/3] ethdev: Add rxtx callback support John McNamara
2015-02-18 18:19 ` Thomas Monjalon
2015-02-19 9:33 ` Mcnamara, John
2015-02-18 17:42 ` [dpdk-dev] [PATCH v3 3/3] examples: example showing use of callbacks John McNamara
2015-02-19 17:56 ` [dpdk-dev] [PATCH v4 0/3] DPDK ethdev callback support John McNamara
2015-02-19 17:56 ` [dpdk-dev] [PATCH v4 1/3] ethdev: rename callbacks field to link_intr_cbs John McNamara
2015-02-19 17:56 ` [dpdk-dev] [PATCH v4 2/3] ethdev: add optional rxtx callback support John McNamara
2015-02-20 10:06 ` Bruce Richardson [this message]
2015-02-20 10:31 ` Thomas Monjalon
2015-02-19 17:56 ` [dpdk-dev] [PATCH v4 3/3] examples: example showing use of callbacks John McNamara
2015-02-20 17:03 ` [dpdk-dev] [PATCH v5 0/3] DPDK ethdev callback support John McNamara
2015-02-20 17:03 ` [dpdk-dev] [PATCH v5 1/3] ethdev: rename callbacks field to link_intr_cbs John McNamara
2015-02-20 17:03 ` [dpdk-dev] [PATCH v5 2/3] ethdev: add optional rxtx callback support John McNamara
2015-02-23 15:11 ` Thomas Monjalon
2015-02-23 17:27 ` Mcnamara, John
2015-02-20 17:03 ` [dpdk-dev] [PATCH v5 3/3] examples: example showing use of callbacks John McNamara
2015-02-23 18:30 ` [dpdk-dev] [PATCH v6 0/3] DPDK ethdev callback support John McNamara
2015-02-23 18:30 ` [dpdk-dev] [PATCH v6 1/3] ethdev: rename callbacks field to link_intr_cbs John McNamara
2015-02-23 18:30 ` [dpdk-dev] [PATCH v6 2/3] ethdev: add optional rxtx callback support John McNamara
2015-02-23 18:30 ` [dpdk-dev] [PATCH v6 3/3] examples: example showing use of callbacks John McNamara
2015-02-23 23:39 ` [dpdk-dev] [PATCH v6 0/3] DPDK ethdev callback support Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150220100600.GA17276@bricha3-MOBL3 \
--to=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=john.mcnamara@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).