From: Jerin Jacob <jerin.jacob@caviumnetworks.com>
To: Hemant Agrawal <hemant.agrawal@nxp.com>
Cc: <dev@dpdk.org>, <jianbo.liu@linaro.org>
Subject: Re: [dpdk-dev] [PATCH] mk: Introduce NXP dpaa2 architecture based on armv8-a
Date: Mon, 9 May 2016 14:36:22 +0530 [thread overview]
Message-ID: <20160509090621.GA4631@localhost.localdomain> (raw)
In-Reply-To: <1462801702-30918-1-git-send-email-hemant.agrawal@nxp.com>
On Mon, May 09, 2016 at 07:18:22PM +0530, Hemant Agrawal wrote:
> This patch introduces dpaa2 machine target to address difference
> in cpu parameter, number of core to 8 and no numa support
> w.r.t default armv8-a machine
>
> Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
> ---
> config/defconfig_arm64-dpaa2-linuxapp-gcc | 44 +++++++++++++++++++++++
> mk/machine/dpaa2/rte.vars.mk | 60 +++++++++++++++++++++++++++++++
> mk/rte.module.mk | 5 +++
> 3 files changed, 109 insertions(+)
> create mode 100644 config/defconfig_arm64-dpaa2-linuxapp-gcc
> create mode 100644 mk/machine/dpaa2/rte.vars.mk
>
> diff --git a/config/defconfig_arm64-dpaa2-linuxapp-gcc b/config/defconfig_arm64-dpaa2-linuxapp-gcc
> new file mode 100644
> index 0000000..80bda26
> --- /dev/null
> +++ b/config/defconfig_arm64-dpaa2-linuxapp-gcc
> @@ -0,0 +1,44 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2016 Freescale Semiconductor, Inc. All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Freescale Semiconductor nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +#
> +
> +#include "defconfig_arm64-armv8a-linuxapp-gcc"
> +
> +# NXP (Freescale) - Soc Architecture with WRIOP and QBMAN support
> +CONFIG_RTE_MACHINE="dpaa2"
> +CONFIG_RTE_ARCH_ARM_TUNE="cortex-a57+fp+simd"
> +
> +#
> +# Compile Environment Abstraction Layer
> +#
> +CONFIG_RTE_MAX_LCORE=8
> +CONFIG_RTE_MAX_NUMA_NODES=1
> +CONFIG_RTE_EAL_IGB_UIO=n
I think it makes sense to move this option to generic arm64 config
as upstream arm64 kernel does not have support for sysfs based PCI mmap
resource file,(/sys/bus/pci/devices/B:D:F/resource[_wc]X) need for
CONFIG_RTE_EAL_IGB_UIO to work) and use VFIO for all cases.
Any objections?
> +CONFIG_RTE_EAL_VFIO=y
> diff --git a/mk/machine/dpaa2/rte.vars.mk b/mk/machine/dpaa2/rte.vars.mk
> new file mode 100644
> index 0000000..8541633
> --- /dev/null
> +++ b/mk/machine/dpaa2/rte.vars.mk
> @@ -0,0 +1,60 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2016 Freescale Semiconductor, Inc. All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Freescale Semiconductor nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +#
> +# machine:
> +#
> +# - can define ARCH variable (overridden by cmdline value)
> +# - can define CROSS variable (overridden by cmdline value)
> +# - define MACHINE_CFLAGS variable (overridden by cmdline value)
> +# - define MACHINE_LDFLAGS variable (overridden by cmdline value)
> +# - define MACHINE_ASFLAGS variable (overridden by cmdline value)
> +# - can define CPU_CFLAGS variable (overridden by cmdline value) that
> +# overrides the one defined in arch.
> +# - can define CPU_LDFLAGS variable (overridden by cmdline value) that
> +# overrides the one defined in arch.
> +# - can define CPU_ASFLAGS variable (overridden by cmdline value) that
> +# overrides the one defined in arch.
> +# - may override any previously defined variable
> +#
> +
> +# ARCH =
> +# CROSS =
> +# MACHINE_CFLAGS =
> +# MACHINE_LDFLAGS =
> +# MACHINE_ASFLAGS =
> +# CPU_CFLAGS =
> +# CPU_LDFLAGS =
> +# CPU_ASFLAGS =
> +MACHINE_CFLAGS += -march=armv8-a
> +
> +ifdef CONFIG_RTE_ARCH_ARM_TUNE
> +MACHINE_CFLAGS += -mcpu=$(CONFIG_RTE_ARCH_ARM_TUNE)
> +endif
> diff --git a/mk/rte.module.mk b/mk/rte.module.mk
> index 53ed4fe..09bf51b 100644
> --- a/mk/rte.module.mk
> +++ b/mk/rte.module.mk
> @@ -29,6 +29,11 @@
> # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>
> +#### Linaro toolchain usages arm64 instread of aarch64 in kernel
> +ifeq ($(ARCH), aarch64)
> +ARCH = arm64
> +endif
> +
> ##### if sourced from kernel Kbuild system
> ifneq ($(KERNELRELEASE),)
> override EXTRA_CFLAGS = $(MODULE_CFLAGS) $(EXTRA_KERNEL_CFLAGS)
> --
> 1.9.1
>
next prev parent reply other threads:[~2016-05-09 9:06 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-09 13:48 Hemant Agrawal
2016-05-09 8:20 ` Santosh Shukla
2016-05-09 8:39 ` Thomas Monjalon
2016-05-09 9:09 ` Hemant Agrawal
2016-05-09 9:06 ` Jerin Jacob [this message]
2016-05-09 9:13 ` Santosh Shukla
2016-05-09 9:16 ` Hemant Agrawal
2016-05-09 11:02 ` Jianbo Liu
2016-05-09 12:11 ` Jerin Jacob
2016-05-09 15:22 ` Jianbo Liu
2016-05-09 16:17 ` Jerin Jacob
2016-05-10 2:10 ` Jianbo Liu
2016-05-10 5:26 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160509090621.GA4631@localhost.localdomain \
--to=jerin.jacob@caviumnetworks.com \
--cc=dev@dpdk.org \
--cc=hemant.agrawal@nxp.com \
--cc=jianbo.liu@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).