From: Jan Viktorin <viktorin@rehivetech.com>
To: David Hunt <david.hunt@intel.com>
Cc: dev@dpdk.org, olivier.matz@6wind.com, jerin.jacob@caviumnetworks.com
Subject: Re: [dpdk-dev] [PATCH v6 1/5] mempool: support external handler
Date: Wed, 1 Jun 2016 19:54:56 +0200 [thread overview]
Message-ID: <20160601195456.47ac2a7c@pcviktorin.fit.vutbr.cz> (raw)
In-Reply-To: <1464797998-76690-2-git-send-email-david.hunt@intel.com>
Hello David,
the rename s/handler/ops/ has a lot of residues. Sorry for that :). I tried to
mark most of them. Otherwise, I couldn't see many more serious issues for now.
Just, note the s/pool/priv/ rename suggestion.
On Wed, 1 Jun 2016 17:19:54 +0100
David Hunt <david.hunt@intel.com> wrote:
> Until now, the objects stored in a mempool were internally stored in a
> ring. This patch introduces the possibility to register external handlers
> replacing the ring.
>
> The default behavior remains unchanged, but calling the new function
> rte_mempool_set_handler() right after rte_mempool_create_empty() allows
> the user to change the handler that will be used when populating
> the mempool.
>
> v7 changes:
> * Moved the flags handling from rte_mempool_create_empty to
> rte_mempool_create, as it's only there for backward compatibility
> * Various comment additions and cleanup
> * Renamed rte_mempool_handler to rte_mempool_ops
> * Added a union for *pool and u64 pool_id in struct rte_mempool
>
> v6 changes:
> * split the original patch into a few parts for easier review.
> * rename functions with _ext_ to _ops_.
> * addressed some review comments
> * renamed put and get functions to enqueue and dequeue
> * renamed rte_mempool_handler struct to rte_mempool_handler_ops
> * changed occurences of rte_mempool_handler_ops to const, as they
> contain function pointers (security)
> * added some extra comments
>
> v5 changes: rebasing on top of 35 patch set mempool work.
>
> Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
> Signed-off-by: David Hunt <david.hunt@intel.com>
> ---
> lib/librte_mempool/Makefile | 1 +
> lib/librte_mempool/rte_mempool.c | 71 ++++------
> lib/librte_mempool/rte_mempool.h | 235 ++++++++++++++++++++++++++++---
> lib/librte_mempool/rte_mempool_handler.c | 141 +++++++++++++++++++
> 4 files changed, 384 insertions(+), 64 deletions(-)
> create mode 100644 lib/librte_mempool/rte_mempool_handler.c
>
> diff --git a/lib/librte_mempool/Makefile b/lib/librte_mempool/Makefile
> index 43423e0..793745f 100644
> --- a/lib/librte_mempool/Makefile
> +++ b/lib/librte_mempool/Makefile
> @@ -42,6 +42,7 @@ LIBABIVER := 2
>
> # all source are stored in SRCS-y
> SRCS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += rte_mempool.c
> +SRCS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += rte_mempool_handler.c
> # install includes
> SYMLINK-$(CONFIG_RTE_LIBRTE_MEMPOOL)-include := rte_mempool.h
>
> diff --git a/lib/librte_mempool/rte_mempool.c b/lib/librte_mempool/rte_mempool.c
> index b54de43..9f34d30 100644
> --- a/lib/librte_mempool/rte_mempool.c
> +++ b/lib/librte_mempool/rte_mempool.c
> @@ -148,7 +148,7 @@ mempool_add_elem(struct rte_mempool *mp, void *obj, phys_addr_t physaddr)
> #endif
>
> /* enqueue in ring */
> - rte_ring_sp_enqueue(mp->ring, obj);
> + rte_mempool_ops_enqueue_bulk(mp, &obj, 1);
> }
>
> /* call obj_cb() for each mempool element */
> @@ -303,40 +303,6 @@ rte_mempool_xmem_usage(__rte_unused void *vaddr, uint32_t elt_num,
> return (size_t)paddr_idx << pg_shift;
> }
>
> -/* create the internal ring */
> -static int
> -rte_mempool_ring_create(struct rte_mempool *mp)
> -{
> - int rg_flags = 0, ret;
> - char rg_name[RTE_RING_NAMESIZE];
> - struct rte_ring *r;
> -
> - ret = snprintf(rg_name, sizeof(rg_name),
> - RTE_MEMPOOL_MZ_FORMAT, mp->name);
> - if (ret < 0 || ret >= (int)sizeof(rg_name))
> - return -ENAMETOOLONG;
> -
> - /* ring flags */
> - if (mp->flags & MEMPOOL_F_SP_PUT)
> - rg_flags |= RING_F_SP_ENQ;
> - if (mp->flags & MEMPOOL_F_SC_GET)
> - rg_flags |= RING_F_SC_DEQ;
> -
> - /* Allocate the ring that will be used to store objects.
> - * Ring functions will return appropriate errors if we are
> - * running as a secondary process etc., so no checks made
> - * in this function for that condition.
> - */
> - r = rte_ring_create(rg_name, rte_align32pow2(mp->size + 1),
> - mp->socket_id, rg_flags);
> - if (r == NULL)
> - return -rte_errno;
> -
> - mp->ring = r;
> - mp->flags |= MEMPOOL_F_RING_CREATED;
> - return 0;
> -}
> -
> /* free a memchunk allocated with rte_memzone_reserve() */
> static void
> rte_mempool_memchunk_mz_free(__rte_unused struct rte_mempool_memhdr *memhdr,
> @@ -354,7 +320,7 @@ rte_mempool_free_memchunks(struct rte_mempool *mp)
> void *elt;
>
> while (!STAILQ_EMPTY(&mp->elt_list)) {
> - rte_ring_sc_dequeue(mp->ring, &elt);
> + rte_mempool_ops_dequeue_bulk(mp, &elt, 1);
> (void)elt;
> STAILQ_REMOVE_HEAD(&mp->elt_list, next);
> mp->populated_size--;
> @@ -383,13 +349,16 @@ rte_mempool_populate_phys(struct rte_mempool *mp, char *vaddr,
> unsigned i = 0;
> size_t off;
> struct rte_mempool_memhdr *memhdr;
> - int ret;
>
> /* create the internal ring if not already done */
> if ((mp->flags & MEMPOOL_F_RING_CREATED) == 0) {
> - ret = rte_mempool_ring_create(mp);
> - if (ret < 0)
> - return ret;
> + rte_errno = 0;
> + mp->pool = rte_mempool_ops_alloc(mp);
> + if (mp->pool == NULL) {
> + if (rte_errno == 0)
> + return -EINVAL;
> + return -rte_errno;
Are you sure the rte_errno is a positive value?
> + }
> }
>
> /* mempool is already populated */
> @@ -703,7 +672,7 @@ rte_mempool_free(struct rte_mempool *mp)
> rte_rwlock_write_unlock(RTE_EAL_TAILQ_RWLOCK);
>
> rte_mempool_free_memchunks(mp);
> - rte_ring_free(mp->ring);
> + rte_mempool_ops_free(mp);
> rte_memzone_free(mp->mz);
> }
>
> @@ -815,6 +784,20 @@ rte_mempool_create_empty(const char *name, unsigned n, unsigned elt_size,
> RTE_PTR_ADD(mp, MEMPOOL_HEADER_SIZE(mp, 0));
>
> te->data = mp;
> +
> + /*
> + * Since we have 4 combinations of the SP/SC/MP/MC examine the flags to
> + * set the correct index into the handler table.
> + */
> + if (flags & (MEMPOOL_F_SP_PUT | MEMPOOL_F_SC_GET))
> + rte_mempool_set_handler(mp, "ring_sp_sc");
> + else if (flags & MEMPOOL_F_SP_PUT)
> + rte_mempool_set_handler(mp, "ring_sp_mc");
> + else if (flags & MEMPOOL_F_SC_GET)
> + rte_mempool_set_handler(mp, "ring_mp_sc");
> + else
> + rte_mempool_set_handler(mp, "ring_mp_mc");
> +
> rte_rwlock_write_lock(RTE_EAL_TAILQ_RWLOCK);
> TAILQ_INSERT_TAIL(mempool_list, te, next);
> rte_rwlock_write_unlock(RTE_EAL_TAILQ_RWLOCK);
> @@ -930,7 +913,7 @@ rte_mempool_count(const struct rte_mempool *mp)
> unsigned count;
> unsigned lcore_id;
>
> - count = rte_ring_count(mp->ring);
> + count = rte_mempool_ops_get_count(mp);
>
> if (mp->cache_size == 0)
> return count;
> @@ -1123,7 +1106,7 @@ rte_mempool_dump(FILE *f, struct rte_mempool *mp)
>
> fprintf(f, "mempool <%s>@%p\n", mp->name, mp);
> fprintf(f, " flags=%x\n", mp->flags);
> - fprintf(f, " ring=<%s>@%p\n", mp->ring->name, mp->ring);
> + fprintf(f, " pool=%p\n", mp->pool);
> fprintf(f, " phys_addr=0x%" PRIx64 "\n", mp->mz->phys_addr);
> fprintf(f, " nb_mem_chunks=%u\n", mp->nb_mem_chunks);
> fprintf(f, " size=%"PRIu32"\n", mp->size);
> @@ -1144,7 +1127,7 @@ rte_mempool_dump(FILE *f, struct rte_mempool *mp)
> }
>
> cache_count = rte_mempool_dump_cache(f, mp);
> - common_count = rte_ring_count(mp->ring);
> + common_count = rte_mempool_ops_get_count(mp);
> if ((cache_count + common_count) > mp->size)
> common_count = mp->size - cache_count;
> fprintf(f, " common_pool_count=%u\n", common_count);
> diff --git a/lib/librte_mempool/rte_mempool.h b/lib/librte_mempool/rte_mempool.h
> index 60339bd..b659565 100644
> --- a/lib/librte_mempool/rte_mempool.h
> +++ b/lib/librte_mempool/rte_mempool.h
> @@ -67,6 +67,7 @@
> #include <inttypes.h>
> #include <sys/queue.h>
>
> +#include <rte_spinlock.h>
> #include <rte_log.h>
> #include <rte_debug.h>
> #include <rte_lcore.h>
> @@ -204,9 +205,13 @@ struct rte_mempool_memhdr {
> struct rte_mempool {
> char name[RTE_MEMPOOL_NAMESIZE]; /**< Name of mempool. */
> struct rte_ring *ring; /**< Ring to store objects. */
> + union {
> + void *pool; /**< Ring or pool to store objects */
What about calling this pdata or priv? I think, it can improve some doc comments.
Describing a "pool" may refer to both the rte_mempool itself or to the mp->pool
pointer. The "priv" would help to understand the code a bit.
Then the rte_mempool_alloc_t can be called rte_mempool_priv_alloc_t. Or something
similar. It's than clear enough, what the function should do...
> + uint64_t *pool_id; /**< External mempool identifier */
Why is pool_id a pointer? Is it a typo? I've understood it should be 64b wide
from the discussion (Olivier, Jerin, David):
| >>> something like below,
| >>> union {
| >>> void *pool;
| >>> uint64_t val;
| >>> uint8_t extra_mem[16] // available free bytes in fast path cache line
| >>>
| >>> }
| >>
| >> Something for the future, perhaps? Will the 8-bits in the flags suffice for
| >> now?
| >
| > OK. But simple anonymous union for same type should be OK add now? Not
| > much change I believe, If its difficult then postpone it
| >
| > union {
| > void *pool;
| > uint64_t val;
| > }
|
| I'm ok with the simple union with (void *) and (uint64_t).
| Maybe "val" should be replaced by something more appropriate.
| Is "pool_id" a better name?
> + };
> const struct rte_memzone *mz; /**< Memzone where pool is allocated */
> int flags; /**< Flags of the mempool. */
> - int socket_id; /**< Socket id passed at mempool creation. */
> + int socket_id; /**< Socket id passed at create */
> uint32_t size; /**< Max size of the mempool. */
> uint32_t cache_size; /**< Size of per-lcore local cache. */
> uint32_t cache_flushthresh;
> @@ -217,6 +222,14 @@ struct rte_mempool {
> uint32_t trailer_size; /**< Size of trailer (after elt). */
>
> unsigned private_data_size; /**< Size of private data. */
> + /**
> + * Index into rte_mempool_handler_table array of mempool handler ops
s/rte_mempool_handler_table/rte_mempool_ops_table/
> + * structs, which contain callback function pointers.
> + * We're using an index here rather than pointers to the callbacks
> + * to facilitate any secondary processes that may want to use
> + * this mempool.
> + */
> + int32_t handler_idx;
s/handler_idx/ops_idx/
What about ops_index? Not a big deal...
>
> struct rte_mempool_cache *local_cache; /**< Per-lcore local cache */
>
> @@ -325,6 +338,199 @@ void rte_mempool_check_cookies(const struct rte_mempool *mp,
> #define __mempool_check_cookies(mp, obj_table_const, n, free) do {} while(0)
> #endif /* RTE_LIBRTE_MEMPOOL_DEBUG */
>
> +#define RTE_MEMPOOL_HANDLER_NAMESIZE 32 /**< Max length of handler name. */
> +
> +/**
> + * typedef for allocating the external pool.
What about:
function prototype to provide an implementation specific data
> + * The handler's alloc function does whatever it needs to do to grab memory
> + * for this handler, and sets the *pool opaque pointer in the rte_mempool
> + * struct. In the default handler, *pool points to a ring,in other handlers,
What about:
The function should provide a memory heap representation or another private data
used for allocation by the rte_mempool_ops. E.g. the default ops provides an
instance of the rte_ring for this purpose.
> + * it will mostlikely point to a different type of data structure.
> + * It will be transparent to the application programmer.
I'd add something like this:
The function should not touch the given *mp instance.
...because it's goal is NOT to set the mp->pool, this is done by the
rte_mempool_populate_phys - the caller of this rte_mempool_ops_alloc.
This is why I've suggested to pass the rte_mempool as const in the v5.
Is there any reason to modify the rte_mempool contents by the implementation?
I think, we just need to read the flags, socket_id, etc.
> + */
> +typedef void *(*rte_mempool_alloc_t)(struct rte_mempool *mp);
> +
> +/** Free the external pool opaque data (that pointed to by *pool) */
What about:
/** Free the opaque private data stored in the mp->pool pointer. */
> +typedef void (*rte_mempool_free_t)(void *p);
> +
> +/**
> + * Put an object in the external pool.
> + * The *p pointer is the opaque data for a given mempool handler (ring,
> + * array, linked list, etc)
The obj_table is not documented. Is it really a table? I'd called an array instead.
> + */
> +typedef int (*rte_mempool_put_t)(void *p, void * const *obj_table, unsigned n);
unsigned int
> +
> +/** Get an object from the external pool. */
> +typedef int (*rte_mempool_get_t)(void *p, void **obj_table, unsigned n);
unsigned int
> +
> +/** Return the number of available objects in the external pool. */
Is the number of available objects or the total number of all objects
(so probably a constant value)?
> +typedef unsigned (*rte_mempool_get_count)(void *p);
Should it be const void *p?
> +
> +/** Structure defining a mempool handler. */
What about:
/** Structure defining mempool operations. */
> +struct rte_mempool_ops {
> + char name[RTE_MEMPOOL_HANDLER_NAMESIZE]; /**< Name of mempool handler */
s/RTE_MEMPOOL_HANDLER_NAMESIZE/RTE_MEMPOOL_OPS_NAMESIZE/
> + rte_mempool_alloc_t alloc; /**< Allocate the external pool. */
What about:
Allocate the private data for this rte_mempool_ops.
> + rte_mempool_free_t free; /**< Free the external pool. */
> + rte_mempool_put_t put; /**< Put an object. */
> + rte_mempool_get_t get; /**< Get an object. */
> + rte_mempool_get_count get_count; /**< Get the number of available objs. */
> +} __rte_cache_aligned;
> +
> +#define RTE_MEMPOOL_MAX_HANDLER_IDX 16 /**< Max registered handlers */
s/RTE_MEMPOOL_MAX_HANDLER_IDX/RTE_MEMPOOL_MAX_OPS_IDX/
> +
> +/**
> + * Structure storing the table of registered handlers, each of which contain
> + * the function pointers for the mempool handler functions.
> + * Each process has it's own storage for this handler struct aray so that
> + * the mempools can be shared across primary and secondary processes.
> + * The indices used to access the array are valid across processes, whereas
> + * any function pointers stored directly in the mempool struct would not be.
> + * This results in us simply having "handler_idx" in the mempool struct.
> + */
> +struct rte_mempool_handler_table {
s/rte_mempool_handler_table/rte_mempool_ops_table/
> + rte_spinlock_t sl; /**< Spinlock for add/delete. */
> + uint32_t num_handlers; /**< Number of handlers in the table. */
s/num_handlers/num_ops/
> + /**
> + * Storage for all possible handlers.
> + */
> + struct rte_mempool_ops handler_ops[RTE_MEMPOOL_MAX_HANDLER_IDX];
s/handler_ops/ops/
> +} __rte_cache_aligned;
> +
> +/** Array of registered handlers */
> +extern struct rte_mempool_handler_table rte_mempool_handler_table;
s/rte_mempool_handler_table/rte_mempool_ops_table/
> +
> +/**
> + * @internal Get the mempool handler from its index.
> + *
> + * @param handler_idx
> + * The index of the handler in the handler table. It must be a valid
> + * index: (0 <= idx < num_handlers).
> + * @return
> + * The pointer to the handler in the table.
> + */
> +static inline struct rte_mempool_ops *
> +rte_mempool_handler_get(int handler_idx)
rte_mempool_ops_get(int ops_idx)
> +{
> + return &rte_mempool_handler_table.handler_ops[handler_idx];
> +}
> +
> +/**
> + * @internal wrapper for external mempool manager alloc callback.
> + *
> + * @param mp
> + * Pointer to the memory pool.
> + * @return
> + * The opaque pointer to the external pool.
> + */
> +void *
> +rte_mempool_ops_alloc(struct rte_mempool *mp);
> +
> +/**
> + * @internal wrapper for external mempool manager get callback.
> + *
> + * @param mp
> + * Pointer to the memory pool.
> + * @param obj_table
> + * Pointer to a table of void * pointers (objects).
> + * @param n
> + * Number of objects to get.
> + * @return
> + * - 0: Success; got n objects.
> + * - <0: Error; code of handler get function.
> + */
> +static inline int
> +rte_mempool_ops_dequeue_bulk(struct rte_mempool *mp,
> + void **obj_table, unsigned n)
> +{
> + struct rte_mempool_ops *handler;
*ops
> +
> + handler = rte_mempool_handler_get(mp->handler_idx);
> + return handler->get(mp->pool, obj_table, n);
> +}
> +
> +/**
> + * @internal wrapper for external mempool manager put callback.
> + *
> + * @param mp
> + * Pointer to the memory pool.
> + * @param obj_table
> + * Pointer to a table of void * pointers (objects).
> + * @param n
> + * Number of objects to put.
> + * @return
> + * - 0: Success; n objects supplied.
> + * - <0: Error; code of handler put function.
> + */
> +static inline int
> +rte_mempool_ops_enqueue_bulk(struct rte_mempool *mp, void * const *obj_table,
> + unsigned n)
> +{
> + struct rte_mempool_ops *handler;
*ops
> +
> + handler = rte_mempool_handler_get(mp->handler_idx);
> + return handler->put(mp->pool, obj_table, n);
> +}
> +
> +/**
> + * @internal wrapper for external mempool manager get_count callback.
> + *
> + * @param mp
> + * Pointer to the memory pool.
> + * @return
> + * The number of available objects in the external pool.
> + */
> +unsigned
> +rte_mempool_ops_get_count(const struct rte_mempool *mp);
> +
> +/**
> + * @internal wrapper for external mempool manager free callback.
> + *
> + * @param mp
> + * Pointer to the memory pool.
> + */
> +void
> +rte_mempool_ops_free(struct rte_mempool *mp);
> +
> +/**
> + * Set the handler of a mempool
> + *
> + * This can only be done on a mempool that is not populated, i.e. just after
> + * a call to rte_mempool_create_empty().
> + *
> + * @param mp
> + * Pointer to the memory pool.
> + * @param name
> + * Name of the handler.
> + * @return
> + * - 0: Sucess; the new handler is configured.
> + * - EINVAL - Invalid handler name provided
> + * - EEXIST - mempool already has a handler assigned
They are returned as -EINVAL and -EEXIST.
IMHO, using "-" here is counter-intuitive:
- EINVAL
does it mean a positive with "-" or negative value?
> + */
> +int
> +rte_mempool_set_handler(struct rte_mempool *mp, const char *name);
rte_mempool_set_ops
What about rte_mempool_set_ops_byname? Not a big deal...
> +
> +/**
> + * Register an external pool handler.
Register mempool operations
> + *
> + * @param h
> + * Pointer to the external pool handler
> + * @return
> + * - >=0: Sucess; return the index of the handler in the table.
> + * - EINVAL - missing callbacks while registering handler
> + * - ENOSPC - the maximum number of handlers has been reached
- -EINVAL
- -ENOSPC
> + */
> +int rte_mempool_handler_register(const struct rte_mempool_ops *h);
rte_mempool_ops_register
> +
> +/**
> + * Macro to statically register an external pool handler.
What about adding:
Note that the rte_mempool_ops_register fails silently here when
more then RTE_MEMPOOL_MAX_OPS_IDX is registered.
> + */
> +#define MEMPOOL_REGISTER_HANDLER(h)
MEMPOOL_REGISTER_OPS
\
> + void mp_hdlr_init_##h(void); \
> + void __attribute__((constructor, used)) mp_hdlr_init_##h(void) \
> + { \
> + rte_mempool_handler_register(&h); \
> + }
> +
> /**
> * An object callback function for mempool.
> *
> @@ -774,7 +980,7 @@ __mempool_put_bulk(struct rte_mempool *mp, void * const *obj_table,
> cache->len += n;
>
> if (cache->len >= flushthresh) {
> - rte_ring_mp_enqueue_bulk(mp->ring, &cache->objs[cache_size],
> + rte_mempool_ops_enqueue_bulk(mp, &cache->objs[cache_size],
> cache->len - cache_size);
> cache->len = cache_size;
> }
> @@ -785,19 +991,10 @@ ring_enqueue:
>
> /* push remaining objects in ring */
> #ifdef RTE_LIBRTE_MEMPOOL_DEBUG
> - if (is_mp) {
> - if (rte_ring_mp_enqueue_bulk(mp->ring, obj_table, n) < 0)
> - rte_panic("cannot put objects in mempool\n");
> - }
> - else {
> - if (rte_ring_sp_enqueue_bulk(mp->ring, obj_table, n) < 0)
> - rte_panic("cannot put objects in mempool\n");
> - }
> + if (rte_mempool_ops_enqueue_bulk(mp, obj_table, n) < 0)
> + rte_panic("cannot put objects in mempool\n");
> #else
> - if (is_mp)
> - rte_ring_mp_enqueue_bulk(mp->ring, obj_table, n);
> - else
> - rte_ring_sp_enqueue_bulk(mp->ring, obj_table, n);
> + rte_mempool_ops_enqueue_bulk(mp, obj_table, n);
> #endif
> }
>
> @@ -922,7 +1119,7 @@ rte_mempool_put(struct rte_mempool *mp, void *obj)
> */
> static inline int __attribute__((always_inline))
> __mempool_get_bulk(struct rte_mempool *mp, void **obj_table,
> - unsigned n, int is_mc)
> + unsigned n, __rte_unused int is_mc)
unsigned int
> {
> int ret;
> struct rte_mempool_cache *cache;
> @@ -945,7 +1142,8 @@ __mempool_get_bulk(struct rte_mempool *mp, void **obj_table,
> uint32_t req = n + (cache_size - cache->len);
>
> /* How many do we require i.e. number to fill the cache + the request */
> - ret = rte_ring_mc_dequeue_bulk(mp->ring, &cache->objs[cache->len], req);
> + ret = rte_mempool_ops_dequeue_bulk(mp,
> + &cache->objs[cache->len], req);
> if (unlikely(ret < 0)) {
> /*
> * In the offchance that we are buffer constrained,
> @@ -972,10 +1170,7 @@ __mempool_get_bulk(struct rte_mempool *mp, void **obj_table,
> ring_dequeue:
>
> /* get remaining objects from ring */
> - if (is_mc)
> - ret = rte_ring_mc_dequeue_bulk(mp->ring, obj_table, n);
> - else
> - ret = rte_ring_sc_dequeue_bulk(mp->ring, obj_table, n);
> + ret = rte_mempool_ops_dequeue_bulk(mp, obj_table, n);
>
> if (ret < 0)
> __MEMPOOL_STAT_ADD(mp, get_fail, n);
> diff --git a/lib/librte_mempool/rte_mempool_handler.c b/lib/librte_mempool/rte_mempool_handler.c
> new file mode 100644
> index 0000000..ed85d65
> --- /dev/null
> +++ b/lib/librte_mempool/rte_mempool_handler.c
rte_mempool_ops.c
> @@ -0,0 +1,141 @@
> +/*-
> + * BSD LICENSE
> + *
> + * Copyright(c) 2016 Intel Corporation. All rights reserved.
> + * Copyright(c) 2016 6WIND S.A.
> + * All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Intel Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <stdio.h>
> +#include <string.h>
> +
> +#include <rte_mempool.h>
> +
> +/* indirect jump table to support external memory pools */
> +struct rte_mempool_handler_table rte_mempool_handler_table = {
rte_mempool_ops_table
> + .sl = RTE_SPINLOCK_INITIALIZER ,
> + .num_handlers = 0
num_ops
> +};
> +
> +/* add a new handler in rte_mempool_handler_table, return its index */
> +int
> +rte_mempool_handler_register(const struct rte_mempool_ops *h)
> +{
> + struct rte_mempool_ops *handler;
*ops
> + int16_t handler_idx;
ops_idx
> +
> + rte_spinlock_lock(&rte_mempool_handler_table.sl);
> +
> + if (rte_mempool_handler_table.num_handlers >=
> + RTE_MEMPOOL_MAX_HANDLER_IDX) {
> + rte_spinlock_unlock(&rte_mempool_handler_table.sl);
> + RTE_LOG(ERR, MEMPOOL,
> + "Maximum number of mempool handlers exceeded\n");
> + return -ENOSPC;
> + }
> +
> + if (h->put == NULL || h->get == NULL || h->get_count == NULL) {
> + rte_spinlock_unlock(&rte_mempool_handler_table.sl);
> + RTE_LOG(ERR, MEMPOOL,
> + "Missing callback while registering mempool handler\n");
> + return -EINVAL;
> + }
> +
> + handler_idx = rte_mempool_handler_table.num_handlers++;
> + handler = &rte_mempool_handler_table.handler_ops[handler_idx];
> + snprintf(handler->name, sizeof(handler->name), "%s", h->name);
> + handler->alloc = h->alloc;
> + handler->put = h->put;
> + handler->get = h->get;
> + handler->get_count = h->get_count;
> +
> + rte_spinlock_unlock(&rte_mempool_handler_table.sl);
> +
> + return handler_idx;
> +}
> +
> +/* wrapper to allocate an external pool handler */
> +void *
> +rte_mempool_ops_alloc(struct rte_mempool *mp)
> +{
> + struct rte_mempool_ops *handler;
*ops
> +
> + handler = rte_mempool_handler_get(mp->handler_idx);
> + if (handler->alloc == NULL)
> + return NULL;
> + return handler->alloc(mp);
> +}
> +
> +/* wrapper to free an external pool handler */
> +void
> +rte_mempool_ops_free(struct rte_mempool *mp)
> +{
> + struct rte_mempool_ops *handler;
*ops
> +
> + handler = rte_mempool_handler_get(mp->handler_idx);
> + if (handler->free == NULL)
> + return;
> + return handler->free(mp);
> +}
> +
> +/* wrapper to get available objects in an external pool handler */
> +unsigned int
> +rte_mempool_ops_get_count(const struct rte_mempool *mp)
> +{
> + struct rte_mempool_ops *handler;
*ops
> +
> + handler = rte_mempool_handler_get(mp->handler_idx);
> + return handler->get_count(mp->pool);
> +}
> +
> +/* sets a handler previously registered by rte_mempool_handler_register */
> +int
> +rte_mempool_set_handler(struct rte_mempool *mp, const char *name)
> +{
> + struct rte_mempool_ops *handler = NULL;
*ops
> + unsigned i;
> +
> + /* too late, the mempool is already populated */
> + if (mp->flags & MEMPOOL_F_RING_CREATED)
> + return -EEXIST;
> +
> + for (i = 0; i < rte_mempool_handler_table.num_handlers; i++) {
> + if (!strcmp(name,
> + rte_mempool_handler_table.handler_ops[i].name)) {
> + handler = &rte_mempool_handler_table.handler_ops[i];
> + break;
> + }
> + }
> +
> + if (handler == NULL)
> + return -EINVAL;
> +
> + mp->handler_idx = i;
> + return 0;
> +}
Regards
Jan
next prev parent reply other threads:[~2016-06-01 18:00 UTC|newest]
Thread overview: 237+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-26 17:25 [dpdk-dev] [PATCH 0/5] add external mempool manager David Hunt
2016-01-26 17:25 ` [dpdk-dev] [PATCH 1/5] mempool: add external mempool manager support David Hunt
2016-01-28 17:52 ` Jerin Jacob
2016-02-03 14:16 ` Hunt, David
2016-02-04 13:23 ` Jerin Jacob
2016-02-04 14:52 ` Olivier MATZ
2016-02-04 16:47 ` Hunt, David
2016-02-08 11:02 ` Olivier MATZ
2016-02-04 17:34 ` Hunt, David
2016-02-05 9:26 ` Olivier MATZ
2016-03-01 13:32 ` Hunt, David
2016-03-04 9:05 ` Olivier MATZ
2016-03-08 10:04 ` Hunt, David
2016-01-26 17:25 ` [dpdk-dev] [PATCH 2/5] memool: add stack (lifo) based external mempool handler David Hunt
2016-01-26 17:25 ` [dpdk-dev] [PATCH 3/5] mempool: add custom external mempool handler example David Hunt
2016-01-28 17:54 ` Jerin Jacob
2016-01-26 17:25 ` [dpdk-dev] [PATCH 4/5] mempool: add autotest for external mempool custom example David Hunt
2016-01-26 17:25 ` [dpdk-dev] [PATCH 5/5] mempool: allow rte_pktmbuf_pool_create switch between memool handlers David Hunt
2016-02-05 10:11 ` Olivier MATZ
2016-01-28 17:26 ` [dpdk-dev] [PATCH 0/5] add external mempool manager Jerin Jacob
2016-01-29 13:40 ` Hunt, David
2016-01-29 17:16 ` Jerin Jacob
2016-02-16 14:48 ` [dpdk-dev] [PATCH 0/6] " David Hunt
2016-02-16 14:48 ` [dpdk-dev] [PATCH 1/6] mempool: add external mempool manager support David Hunt
2016-02-16 19:27 ` [dpdk-dev] [dpdk-dev, " Jan Viktorin
2016-02-19 13:30 ` [dpdk-dev] [PATCH " Olivier MATZ
2016-02-29 11:11 ` Hunt, David
2016-03-04 9:04 ` Olivier MATZ
2016-02-16 14:48 ` [dpdk-dev] [PATCH 2/6] mempool: add stack (lifo) based external mempool handler David Hunt
2016-02-19 13:31 ` Olivier MATZ
2016-02-29 11:04 ` Hunt, David
2016-03-04 9:04 ` Olivier MATZ
2016-03-08 20:45 ` Venkatesan, Venky
2016-03-09 14:53 ` Olivier MATZ
2016-02-16 14:48 ` [dpdk-dev] [PATCH 3/6] mempool: adds a simple ring-based mempool handler using mallocs for objects David Hunt
2016-02-16 14:48 ` [dpdk-dev] [PATCH 4/6] mempool: add autotest for external mempool custom example David Hunt
2016-02-16 14:48 ` [dpdk-dev] [PATCH 5/6] mempool: allow rte_pktmbuf_pool_create switch between memool handlers David Hunt
2016-02-16 14:48 ` [dpdk-dev] [PATCH 6/6] mempool: add in the RTE_NEXT_ABI protection for ABI breakages David Hunt
2016-02-19 13:33 ` Olivier MATZ
2016-02-19 13:25 ` [dpdk-dev] [PATCH 0/6] external mempool manager Olivier MATZ
2016-02-29 10:55 ` Hunt, David
2016-03-09 9:50 ` [dpdk-dev] [PATCH v3 0/4] " David Hunt
2016-03-09 9:50 ` [dpdk-dev] [PATCH v3 1/4] mempool: add external mempool manager support David Hunt
2016-04-11 22:52 ` Yuanhan Liu
2016-03-09 9:50 ` [dpdk-dev] [PATCH v3 2/4] mempool: add custom mempool handler example David Hunt
2016-03-09 9:50 ` [dpdk-dev] [PATCH v3 3/4] mempool: allow rte_pktmbuf_pool_create switch between memool handlers David Hunt
2016-03-09 10:54 ` Panu Matilainen
2016-03-09 11:38 ` Hunt, David
2016-03-09 11:44 ` Panu Matilainen
2016-03-09 9:50 ` [dpdk-dev] [PATCH v3 4/4] mempool: add in the RTE_NEXT_ABI for ABI breakages David Hunt
2016-03-09 10:46 ` Panu Matilainen
2016-03-09 11:30 ` Hunt, David
2016-03-09 14:59 ` Olivier MATZ
2016-03-09 16:28 ` Hunt, David
2016-03-09 16:31 ` Olivier MATZ
2016-03-09 16:39 ` Hunt, David
2016-03-09 11:10 ` [dpdk-dev] [PATCH v3 0/4] external mempool manager Hunt, David
2016-04-11 22:46 ` Yuanhan Liu
2016-04-14 13:57 ` [dpdk-dev] [PATCH v4 0/3] " Olivier Matz
2016-04-14 13:57 ` [dpdk-dev] [PATCH v4 1/3] mempool: support external handler Olivier Matz
2016-04-14 13:57 ` [dpdk-dev] [PATCH v4 2/3] app/test: test external mempool handler Olivier Matz
2016-04-14 13:57 ` [dpdk-dev] [PATCH v4 3/3] mbuf: get default mempool handler from configuration Olivier Matz
2016-05-19 13:44 ` [dpdk-dev] mempool: external mempool manager David Hunt
2016-05-19 13:44 ` [dpdk-dev] [PATCH v5 1/3] mempool: support external handler David Hunt
2016-05-23 12:35 ` [dpdk-dev] [dpdk-dev,v5,1/3] " Jan Viktorin
2016-05-24 14:04 ` Hunt, David
2016-05-31 9:09 ` Hunt, David
2016-05-31 12:06 ` Jan Viktorin
2016-05-31 13:47 ` Hunt, David
2016-05-31 20:40 ` Olivier MATZ
2016-06-01 9:39 ` Hunt, David
2016-06-01 12:30 ` Jan Viktorin
2016-05-24 15:35 ` [dpdk-dev] [PATCH v5 1/3] " Jerin Jacob
2016-05-27 9:52 ` Hunt, David
2016-05-27 10:33 ` Jerin Jacob
2016-05-27 14:44 ` Hunt, David
2016-05-30 9:41 ` Jerin Jacob
2016-05-30 11:27 ` Hunt, David
2016-05-31 8:53 ` Jerin Jacob
2016-05-31 15:37 ` Hunt, David
2016-05-31 16:03 ` Jerin Jacob
2016-05-31 20:41 ` Olivier MATZ
2016-05-31 21:11 ` Jerin Jacob
2016-06-01 10:46 ` Hunt, David
2016-06-01 11:18 ` Jerin Jacob
2016-05-19 13:45 ` [dpdk-dev] [PATCH v5 2/3] app/test: test external mempool handler David Hunt
2016-05-23 12:45 ` [dpdk-dev] [dpdk-dev, v5, " Jan Viktorin
2016-05-31 9:17 ` Hunt, David
2016-05-31 12:14 ` Jan Viktorin
2016-05-31 20:40 ` Olivier MATZ
2016-05-19 13:45 ` [dpdk-dev] [PATCH v5 3/3] mbuf: get default mempool handler from configuration David Hunt
2016-05-23 12:40 ` [dpdk-dev] [dpdk-dev, v5, " Jan Viktorin
2016-05-31 9:26 ` Hunt, David
2016-06-01 16:19 ` [dpdk-dev] [PATCH v6 0/5] mempool: add external mempool manager David Hunt
2016-06-01 16:19 ` [dpdk-dev] [PATCH v6 1/5] mempool: support external handler David Hunt
2016-06-01 16:29 ` Hunt, David
2016-06-01 17:54 ` Jan Viktorin [this message]
2016-06-02 9:11 ` Hunt, David
2016-06-02 11:23 ` Hunt, David
2016-06-02 13:43 ` Jan Viktorin
2016-06-01 16:19 ` [dpdk-dev] [PATCH v6 2/5] mempool: remove rte_ring from rte_mempool struct David Hunt
2016-06-01 16:19 ` [dpdk-dev] [PATCH v6 3/5] mempool: add default external mempool handler David Hunt
2016-06-01 16:19 ` [dpdk-dev] [PATCH v6 4/5] app/test: test " David Hunt
2016-06-01 16:19 ` [dpdk-dev] [PATCH v6 5/5] mbuf: get default mempool handler from configuration David Hunt
2016-06-02 13:27 ` [dpdk-dev] [PATCH v7 0/5] mempool: add external mempool manager David Hunt
2016-06-02 13:27 ` [dpdk-dev] [PATCH v7 1/5] mempool: support external mempool operations David Hunt
2016-06-02 13:38 ` [dpdk-dev] [PATCH v7 0/5] mempool: add external mempool manager Hunt, David
2016-06-03 6:38 ` [dpdk-dev] [PATCH v7 1/5] mempool: support external mempool operations Jerin Jacob
2016-06-03 10:28 ` Hunt, David
2016-06-03 10:49 ` Jerin Jacob
2016-06-03 11:07 ` Olivier MATZ
2016-06-03 11:42 ` Jan Viktorin
2016-06-03 12:10 ` Hunt, David
2016-06-03 12:28 ` Olivier MATZ
2016-06-02 13:27 ` [dpdk-dev] [PATCH v7 2/5] mempool: remove rte_ring from rte_mempool struct David Hunt
2016-06-03 12:28 ` Olivier MATZ
2016-06-03 14:17 ` Hunt, David
2016-06-02 13:27 ` [dpdk-dev] [PATCH v7 3/5] mempool: add default external mempool ops David Hunt
2016-06-02 13:27 ` [dpdk-dev] [PATCH v7 4/5] app/test: test external mempool manager David Hunt
2016-06-02 13:27 ` [dpdk-dev] [PATCH v7 5/5] mbuf: allow apps to change default mempool ops David Hunt
2016-06-03 12:28 ` Olivier MATZ
2016-06-03 14:06 ` Hunt, David
2016-06-03 14:10 ` Olivier Matz
2016-06-03 14:14 ` Hunt, David
2016-06-03 14:58 ` [dpdk-dev] [PATCH v8 0/5] mempool: add external mempool manager David Hunt
2016-06-03 14:58 ` [dpdk-dev] [PATCH v8 1/3] mempool: support external mempool operations David Hunt
2016-06-06 14:32 ` Shreyansh Jain
2016-06-06 14:38 ` Shreyansh Jain
2016-06-07 9:25 ` Hunt, David
2016-06-08 13:48 ` Shreyansh Jain
2016-06-09 9:39 ` Hunt, David
2016-06-09 10:31 ` Jerin Jacob
2016-06-09 11:06 ` Hunt, David
2016-06-09 11:49 ` Shreyansh Jain
2016-06-09 12:30 ` Jerin Jacob
2016-06-09 13:03 ` Shreyansh Jain
2016-06-09 13:18 ` Hunt, David
2016-06-09 13:37 ` Jerin Jacob
2016-06-09 11:41 ` Shreyansh Jain
2016-06-09 12:55 ` Hunt, David
2016-06-09 13:09 ` Jan Viktorin
2016-06-10 7:29 ` Olivier Matz
2016-06-10 8:49 ` Jan Viktorin
2016-06-10 9:02 ` Hunt, David
2016-06-10 9:34 ` Hunt, David
2016-06-10 11:29 ` Shreyansh Jain
2016-06-10 11:13 ` Jerin Jacob
2016-06-10 11:37 ` Shreyansh Jain
2016-06-07 9:05 ` Shreyansh Jain
2016-06-08 12:13 ` Olivier Matz
2016-06-09 10:33 ` Hunt, David
2016-06-08 14:28 ` Shreyansh Jain
2016-06-03 14:58 ` [dpdk-dev] [PATCH v8 2/3] app/test: test external mempool manager David Hunt
2016-06-03 14:58 ` [dpdk-dev] [PATCH v8 3/3] mbuf: make default mempool ops configurable at build David Hunt
2016-06-10 15:16 ` [dpdk-dev] [PATCH v9 0/3] mempool: add external mempool manager David Hunt
2016-06-10 15:16 ` [dpdk-dev] [PATCH v9 1/3] mempool: support external mempool operations David Hunt
2016-06-13 12:16 ` Olivier Matz
2016-06-13 13:46 ` Hunt, David
2016-06-10 15:16 ` [dpdk-dev] [PATCH v9 2/3] app/test: test external mempool manager David Hunt
2016-06-10 15:16 ` [dpdk-dev] [PATCH v9 3/3] mbuf: make default mempool ops configurable at build David Hunt
2016-06-14 9:46 ` [dpdk-dev] [PATCH v10 0/3] mempool: add external mempool manager David Hunt
2016-06-14 9:46 ` [dpdk-dev] [PATCH v10 1/3] mempool: support external mempool operations David Hunt
2016-06-14 11:38 ` Shreyansh Jain
2016-06-14 12:55 ` Thomas Monjalon
2016-06-14 13:20 ` Hunt, David
2016-06-14 13:29 ` Thomas Monjalon
2016-06-14 9:46 ` [dpdk-dev] [PATCH v10 2/3] app/test: test external mempool manager David Hunt
2016-06-14 11:39 ` Shreyansh Jain
2016-06-14 9:46 ` [dpdk-dev] [PATCH v10 3/3] mbuf: make default mempool ops configurable at build David Hunt
2016-06-14 11:45 ` Shreyansh Jain
2016-06-14 12:32 ` [dpdk-dev] [PATCH v10 0/3] mempool: add external mempool manager Olivier MATZ
2016-06-14 15:48 ` [dpdk-dev] [PATCH v11 " David Hunt
2016-06-14 15:48 ` [dpdk-dev] [PATCH v11 1/3] mempool: support external mempool operations David Hunt
2016-06-14 16:08 ` Thomas Monjalon
2016-06-14 15:49 ` [dpdk-dev] [PATCH v11 2/3] app/test: test external mempool manager David Hunt
2016-06-14 15:49 ` [dpdk-dev] [PATCH v11 3/3] mbuf: make default mempool ops configurable at build David Hunt
2016-06-15 7:47 ` [dpdk-dev] [PATCH v12 0/3] mempool: add external mempool manager David Hunt
2016-06-15 7:47 ` [dpdk-dev] [PATCH v12 1/3] mempool: support external mempool operations David Hunt
2016-06-15 10:14 ` Jan Viktorin
2016-06-15 10:29 ` Hunt, David
2016-06-15 11:26 ` Jan Viktorin
2016-06-15 11:38 ` Thomas Monjalon
2016-06-15 7:47 ` [dpdk-dev] [PATCH v12 2/3] app/test: test external mempool manager David Hunt
2016-06-15 7:47 ` [dpdk-dev] [PATCH v12 3/3] mbuf: make default mempool ops configurable at build David Hunt
2016-06-15 10:13 ` [dpdk-dev] [PATCH v12 0/3] mempool: add external mempool manager Jan Viktorin
2016-06-15 11:47 ` Hunt, David
2016-06-15 12:03 ` Olivier MATZ
2016-06-15 12:38 ` Hunt, David
2016-06-15 13:50 ` Olivier MATZ
2016-06-15 14:02 ` Hunt, David
2016-06-15 14:10 ` Olivier MATZ
2016-06-15 14:47 ` Jan Viktorin
2016-06-15 16:03 ` Hunt, David
2016-06-15 16:34 ` Hunt, David
2016-06-15 16:40 ` Olivier MATZ
2016-06-16 4:35 ` Shreyansh Jain
2016-06-16 7:04 ` Hunt, David
2016-06-16 7:47 ` Hunt, David
2016-06-16 8:47 ` Olivier MATZ
2016-06-16 8:55 ` Hunt, David
2016-06-16 8:58 ` Olivier MATZ
2016-06-16 11:34 ` Hunt, David
2016-06-16 12:30 ` [dpdk-dev] [PATCH v13 " David Hunt
2016-06-16 12:30 ` [dpdk-dev] [PATCH v13 1/3] mempool: support external mempool operations David Hunt
2016-06-17 6:58 ` Hunt, David
2016-06-17 8:08 ` Olivier Matz
2016-06-17 8:42 ` Hunt, David
2016-06-17 9:09 ` Thomas Monjalon
2016-06-17 9:24 ` Hunt, David
2016-06-17 10:19 ` Olivier Matz
2016-06-17 10:18 ` Olivier Matz
2016-06-17 10:47 ` Hunt, David
2016-06-16 12:30 ` [dpdk-dev] [PATCH v13 2/3] app/test: test external mempool manager David Hunt
2016-06-16 12:30 ` [dpdk-dev] [PATCH v13 3/3] mbuf: make default mempool ops configurable at build David Hunt
2016-06-17 13:53 ` [dpdk-dev] [PATCH v14 0/3] mempool: add mempool handler feature David Hunt
2016-06-17 13:53 ` [dpdk-dev] [PATCH v14 1/3] mempool: support mempool handler operations David Hunt
2016-06-17 14:35 ` Jan Viktorin
2016-06-19 11:44 ` Hunt, David
2016-06-17 13:53 ` [dpdk-dev] [PATCH v14 2/3] app/test: test mempool handler David Hunt
2016-06-17 14:37 ` Jan Viktorin
2016-06-17 13:53 ` [dpdk-dev] [PATCH v14 3/3] mbuf: make default mempool ops configurable at build David Hunt
2016-06-17 14:41 ` Jan Viktorin
2016-06-19 12:05 ` [dpdk-dev] [PATCH v15 0/3] mempool: add mempool handler feature David Hunt
2016-06-19 12:05 ` [dpdk-dev] [PATCH v15 1/3] mempool: support mempool handler operations David Hunt
2016-06-19 12:05 ` [dpdk-dev] [PATCH v15 2/3] app/test: test mempool handler David Hunt
2016-06-19 12:05 ` [dpdk-dev] [PATCH v15 3/3] mbuf: make default mempool ops configurable at build David Hunt
2016-06-22 7:56 ` [dpdk-dev] [PATCH v15 0/3] mempool: add mempool handler feature Thomas Monjalon
2016-06-22 8:02 ` Thomas Monjalon
2016-06-22 9:27 ` [dpdk-dev] [PATCH v16 " David Hunt
2016-06-22 9:27 ` [dpdk-dev] [PATCH v16 1/3] mempool: support mempool handler operations David Hunt
2016-06-22 9:27 ` [dpdk-dev] [PATCH v16 2/3] app/test: test mempool handler David Hunt
2016-06-22 9:27 ` [dpdk-dev] [PATCH v16 3/3] mbuf: make default mempool ops configurable at build David Hunt
2016-06-23 21:22 ` [dpdk-dev] [PATCH v16 0/3] mempool: add mempool handler feature Thomas Monjalon
2016-06-24 4:55 ` Wiles, Keith
2016-06-24 11:20 ` Jan Viktorin
2016-06-24 11:24 ` Thomas Monjalon
2016-06-24 13:10 ` Jan Viktorin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160601195456.47ac2a7c@pcviktorin.fit.vutbr.cz \
--to=viktorin@rehivetech.com \
--cc=david.hunt@intel.com \
--cc=dev@dpdk.org \
--cc=jerin.jacob@caviumnetworks.com \
--cc=olivier.matz@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).