From: Bruce Richardson <bruce.richardson@intel.com>
To: "Lu, Wenzhuo" <wenzhuo.lu@intel.com>
Cc: "Wang, Xiao W" <xiao.w.wang@intel.com>,
"dev@dpdk.org" <dev@dpdk.org>,
"Yigit, Ferruh" <ferruh.yigit@intel.com>
Subject: Re: [dpdk-dev] [PATCH v2 00/40] net/ixgbe: base code update
Date: Wed, 28 Sep 2016 16:31:30 +0100 [thread overview]
Message-ID: <20160928153130.GA55984@bricha3-MOBL3> (raw)
In-Reply-To: <6A0DE07E22DDAD4C9103DF62FEBC09093932AC3E@shsmsx102.ccr.corp.intel.com>
On Mon, Sep 26, 2016 at 02:06:17AM +0000, Lu, Wenzhuo wrote:
> Hi,
>
>
> > -----Original Message-----
> > From: Wang, Xiao W
> > Sent: Sunday, September 25, 2016 5:00 PM
> > To: Lu, Wenzhuo
> > Cc: dev@dpdk.org; Yigit, Ferruh; Wang, Xiao W
> > Subject: [PATCH v2 00/40] net/ixgbe: base code update
> >
> > v2: - Moved minor changes into a cleanup patch.
> > - Removed some unofficial names in commit log.
> > - Rewrote the commit log of patch 05/40 to describe what the patch
> > actually does.
> > - Improved the wording of some commit log.
> >
> > Update ixgbe base driver, including the following changes:
> >
> > * add X550em_a 10G PHY support
> > * support flow control auto negotiation for X550em_a 1G PHY
> > * add X550em_a FW ALEF support
> > * increase mailbox version to ixgbe_mbox_api_13
> > * add two MAC ops for Hyper-V support
> > * some functional fixes
> >
> > Xiao Wang (40):
> > net/ixgbe/base: fix delta check for setting VFTA
> > net/ixgbe/base: remove X550em SFP iXFI setup
> > net/ixgbe/base: change endianness of PHY data
> > net/ixgbe/base: add X550em_a 10G PHY support
> > net/ixgbe/base: move vf_update_xcast_mode to base code
> > net/ixgbe/base: introduce new ops init functions
> > net/ixgbe/base: separate PHY probe code
> > net/ixgbe/base: fully initialize X550em_a 1G PHYs
> > net/ixgbe/base: add macros for VF promiscuous mode
> > net/ixgbe/base: add FC setup for X550em_a fiber
> > net/ixgbe/base: add FC autoneg for X550em_a fiber
> > net/ixgbe/base: clear page register in error path
> > net/ixgbe/base: configure DMAC for 10Mb operation
> > net/ixgbe/base: fix function comments about X550
> > net/ixgbe/base: report setting LPE register error
> > net/ixgbe/base: bump mailbox version
> > net/ixgbe/base: access IOSF by host interface
> > net/ixgbe/base: fix check on NACK
> > net/ixgbe/base: define X550 PCIe serial MAC addr
> > net/ixgbe/base: bypass checking link for crosstalk
> > net/ixgbe/base: support X550em_a SGMII FC autoneg
> > net/ixgbe/base: add macros for GENEVE UDP port
> > net/ixgbe/base: add bound check in LED functions
> > net/ixgbe/base: use default check link function
> > net/ixgbe/base: set default autoneg speed at reset
> > net/ixgbe/base: add missing FDIRSCTPM mask setting
> > net/ixgbe/base: commonize mailbox write and read
> > net/ixgbe/base: reduce delay for SWFW semaphore
> > net/ixgbe/base: report autoneg supported for X550
> > net/ixgbe/base: remove X550em_a 100Mbps support
> > net/ixgbe/base: unify link speed value
> > net/ixgbe/base: separate ops init from PHY init
> > net/ixgbe/base: add X550em_a FW ALEF support
> > net/ixgbe/base: add two MAC ops for Hyper-V
> > net/ixgbe/base: hold semaphore for shadow RAM access
> > net/ixgbe/base: update X550em_a backplane speed
> > net/ixgbe/base: clean code of flow control autoneg
> > net/ixgbe/base: do not skip PHY configuration
> > net/ixgbe/base: clean up
> > net/ixgbe/base: add base driver update brief
> >
> > doc/guides/rel_notes/release_16_11.rst | 9 +
> > drivers/net/ixgbe/base/README | 2 +-
> > drivers/net/ixgbe/base/ixgbe_82598.c | 6 +-
> > drivers/net/ixgbe/base/ixgbe_82599.c | 16 +-
> > drivers/net/ixgbe/base/ixgbe_api.c | 11 +-
> > drivers/net/ixgbe/base/ixgbe_api.h | 2 +
> > drivers/net/ixgbe/base/ixgbe_common.c | 258 +++++--
> > drivers/net/ixgbe/base/ixgbe_common.h | 3 +-
> > drivers/net/ixgbe/base/ixgbe_mbx.h | 7 +-
> > drivers/net/ixgbe/base/ixgbe_osdep.h | 1 +
> > drivers/net/ixgbe/base/ixgbe_phy.c | 100 ++-
> > drivers/net/ixgbe/base/ixgbe_phy.h | 71 +-
> > drivers/net/ixgbe/base/ixgbe_type.h | 73 +-
> > drivers/net/ixgbe/base/ixgbe_vf.c | 103 ++-
> > drivers/net/ixgbe/base/ixgbe_vf.h | 3 +-
> > drivers/net/ixgbe/base/ixgbe_x540.c | 10 +-
> > drivers/net/ixgbe/base/ixgbe_x550.c | 1262 +++++++++++++++++++++---------
> > --
> > drivers/net/ixgbe/base/ixgbe_x550.h | 61 +-
> > drivers/net/ixgbe/ixgbe_ethdev.c | 43 +-
> > 19 files changed, 1360 insertions(+), 681 deletions(-)
> >
> > --
> > 1.9.3
> Series-Acked-by: Wenzhuo Lu <Wenzhuo.lu@intel.com>
>
Applied to dpdk-next-net/rel_16_11
Thanks,
/Bruce
next prev parent reply other threads:[~2016-09-28 15:31 UTC|newest]
Thread overview: 107+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-27 15:47 [dpdk-dev] [PATCH 00/39] " Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 01/39] net/ixgbe/base: fix delta check for setting VFTA Xiao Wang
2016-09-19 17:00 ` Ferruh Yigit
2016-09-22 15:58 ` Wang, Xiao W
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 00/40] net/ixgbe: base code update Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 01/40] net/ixgbe/base: fix delta check for setting VFTA Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 02/40] net/ixgbe/base: remove X550em SFP iXFI setup Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 03/40] net/ixgbe/base: change endianness of PHY data Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 04/40] net/ixgbe/base: add X550em_a 10G PHY support Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 05/40] net/ixgbe/base: move vf_update_xcast_mode to base code Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 06/40] net/ixgbe/base: introduce new ops init functions Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 07/40] net/ixgbe/base: separate PHY probe code Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 08/40] net/ixgbe/base: fully initialize X550em_a 1G PHYs Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 09/40] net/ixgbe/base: add macros for VF promiscuous mode Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 10/40] net/ixgbe/base: add FC setup for X550em_a fiber Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 11/40] net/ixgbe/base: add FC autoneg " Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 12/40] net/ixgbe/base: clear page register in error path Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 13/40] net/ixgbe/base: configure DMAC for 10Mb operation Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 14/40] net/ixgbe/base: fix function comments about X550 Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 15/40] net/ixgbe/base: report setting LPE register error Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 16/40] net/ixgbe/base: bump mailbox version Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 17/40] net/ixgbe/base: access IOSF by host interface Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 18/40] net/ixgbe/base: fix check on NACK Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 19/40] net/ixgbe/base: define X550 PCIe serial MAC addr Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 20/40] net/ixgbe/base: bypass checking link for crosstalk Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 21/40] net/ixgbe/base: support X550em_a SGMII FC autoneg Xiao Wang
2016-09-25 8:59 ` [dpdk-dev] [PATCH v2 22/40] net/ixgbe/base: add macros for GENEVE UDP port Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 23/40] net/ixgbe/base: add bound check in LED functions Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 24/40] net/ixgbe/base: use default check link function Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 25/40] net/ixgbe/base: set default autoneg speed at reset Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 26/40] net/ixgbe/base: add missing FDIRSCTPM mask setting Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 27/40] net/ixgbe/base: commonize mailbox write and read Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 28/40] net/ixgbe/base: reduce delay for SWFW semaphore Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 29/40] net/ixgbe/base: report autoneg supported for X550 Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 30/40] net/ixgbe/base: remove X550em_a 100Mbps support Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 31/40] net/ixgbe/base: unify link speed value Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 32/40] net/ixgbe/base: separate ops init from PHY init Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 33/40] net/ixgbe/base: add X550em_a FW ALEF support Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 34/40] net/ixgbe/base: add two MAC ops for Hyper-V Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 35/40] net/ixgbe/base: hold semaphore for shadow RAM access Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 36/40] net/ixgbe/base: update X550em_a backplane speed Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 37/40] net/ixgbe/base: clean code of flow control autoneg Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 38/40] net/ixgbe/base: do not skip PHY configuration Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 39/40] net/ixgbe/base: clean up Xiao Wang
2016-09-25 9:00 ` [dpdk-dev] [PATCH v2 40/40] net/ixgbe/base: add base driver update brief Xiao Wang
2016-09-26 2:06 ` [dpdk-dev] [PATCH v2 00/40] net/ixgbe: base code update Lu, Wenzhuo
2016-09-28 15:31 ` Bruce Richardson [this message]
2016-08-27 15:47 ` [dpdk-dev] [PATCH 02/39] net/ixgbe/base: remove X550em SFP iXFI setup Xiao Wang
2016-09-19 17:01 ` Ferruh Yigit
2016-08-27 15:47 ` [dpdk-dev] [PATCH 03/39] net/ixgbe/base: change endianness of PHY data Xiao Wang
2016-09-19 17:01 ` Ferruh Yigit
2016-09-25 0:36 ` Wang, Xiao W
2016-08-27 15:47 ` [dpdk-dev] [PATCH 04/39] net/ixgbe/base: add X550em_a 10G PHY support Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 05/39] net/ixgbe/base: support VF multicast promiscuous Xiao Wang
2016-09-19 17:05 ` Ferruh Yigit
2016-09-23 3:35 ` Wang, Xiao W
2016-08-27 15:47 ` [dpdk-dev] [PATCH 06/39] net/ixgbe/base: introduce new ops init functions Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 07/39] net/ixgbe/base: separate PHY probe code Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 08/39] net/ixgbe/base: fully initialize X550em_a 1G PHYs Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 09/39] net/ixgbe/base: add macros for VF promiscuous mode Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 10/39] net/ixgbe/base: add FC setup for X550em_a fiber Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 11/39] net/ixgbe/base: add FC autoneg " Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 12/39] net/ixgbe/base: clear page register in error path Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 13/39] net/ixgbe/base: configure DMAC for 10Mb operation Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 14/39] net/ixgbe/base: fix function comments about X550 Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 15/39] net/ixgbe/base: report setting LPE register error Xiao Wang
2016-08-27 15:47 ` [dpdk-dev] [PATCH 16/39] net/ixgbe/base: bump mailbox version Xiao Wang
2016-09-19 17:03 ` Ferruh Yigit
2016-09-23 3:50 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 17/39] net/ixgbe/base: access IOSF by host interface Xiao Wang
2016-09-19 17:04 ` Ferruh Yigit
2016-09-23 5:16 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 18/39] net/ixgbe/base: fix check on NACK Xiao Wang
2016-09-19 17:07 ` Ferruh Yigit
2016-09-23 6:05 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 19/39] net/ixgbe/base: define X550 PCIe serial MAC addr Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 20/39] net/ixgbe/base: bypass checking link for crosstalk Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 21/39] net/ixgbe/base: support X550em_a SGMII FC autoneg Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 22/39] net/ixgbe/base: add macros for GENEVE UDP port Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 23/39] net/ixgbe/base: add bound check in LED functions Xiao Wang
2016-09-19 17:06 ` Ferruh Yigit
2016-09-22 16:08 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 24/39] net/ixgbe/base: use default check link function Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 25/39] net/ixgbe/base: set default autoneg speed at reset Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 26/39] net/ixgbe/base: add missing FDIRSCTPM mask setting Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 27/39] net/ixgbe/base: commonize mailbox write and read Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 28/39] net/ixgbe/base: reduce delay for SWFW semaphore Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 29/39] net/ixgbe/base: report autoneg supported for X550 Xiao Wang
2016-09-19 17:07 ` Ferruh Yigit
2016-09-23 0:59 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 30/39] net/ixgbe/base: remove X550em_a 100Mbps support Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 31/39] net/ixgbe/base: unify link speed value Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 32/39] net/ixgbe/base: separate ops init from PHY init Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 33/39] net/ixgbe/base: add X550em_a FW ALEF support Xiao Wang
2016-09-19 17:07 ` Ferruh Yigit
2016-09-22 2:56 ` Lu, Wenzhuo
2016-09-23 6:47 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 34/39] net/ixgbe/base: add two MAC ops for Hyper-V Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 35/39] net/ixgbe/base: hold semaphore for shadow RAM access Xiao Wang
2016-09-19 17:08 ` Ferruh Yigit
2016-09-23 8:06 ` Wang, Xiao W
2016-08-27 15:48 ` [dpdk-dev] [PATCH 36/39] net/ixgbe/base: update X550em_a backplane speed Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 37/39] net/ixgbe/base: clean code of flow control autoneg Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 38/39] net/ixgbe/base: do not skip PHY configuration Xiao Wang
2016-08-27 15:48 ` [dpdk-dev] [PATCH 39/39] net/ixgbe/base: add base driver update brief Xiao Wang
2016-09-19 17:08 ` Ferruh Yigit
2016-09-22 2:55 ` Lu, Wenzhuo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160928153130.GA55984@bricha3-MOBL3 \
--to=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=wenzhuo.lu@intel.com \
--cc=xiao.w.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).