From: Stephen Hemminger <stephen@networkplumber.org>
To: dev@dpdk.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Subject: [dpdk-dev] [PATCH 11/13] broadcom: localize mapping from eth_dev to pci
Date: Mon, 19 Dec 2016 13:59:42 -0800 [thread overview]
Message-ID: <20161219215944.17226-12-sthemmin@microsoft.com> (raw)
In-Reply-To: <20161219215944.17226-1-sthemmin@microsoft.com>
Use existing information about pci and interrupt handle to minimize
the number of places that assume eth_dev contains pci_device
information.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
---
drivers/net/bnxt/bnxt_ethdev.c | 22 +++++++++++++---------
drivers/net/bnxt/bnxt_ring.c | 16 ++++++----------
2 files changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index 035fe07a..529b6c86 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -743,6 +743,8 @@ static int bnxt_reta_query_op(struct rte_eth_dev *eth_dev,
{
struct bnxt *bp = (struct bnxt *)eth_dev->data->dev_private;
struct bnxt_vnic_info *vnic = &bp->vnic_info[0];
+ struct rte_intr_handle *intr_handle
+ = &bp->pdev->intr_handle;
/* Retrieve from the default VNIC */
if (!vnic)
@@ -759,7 +761,7 @@ static int bnxt_reta_query_op(struct rte_eth_dev *eth_dev,
/* EW - need to revisit here copying from u64 to u16 */
memcpy(reta_conf, vnic->rss_table, reta_size);
- if (rte_intr_allow_others(ð_dev->pci_dev->intr_handle)) {
+ if (rte_intr_allow_others(intr_handle)) {
if (eth_dev->data->dev_conf.intr_conf.lsc != 0)
bnxt_dev_lsc_intr_setup(eth_dev);
}
@@ -1009,11 +1011,12 @@ static bool bnxt_vf_pciid(uint16_t id)
static int bnxt_init_board(struct rte_eth_dev *eth_dev)
{
- int rc;
struct bnxt *bp = eth_dev->data->dev_private;
+ struct rte_pci_device *pci_dev = eth_dev->pci_dev;
+ int rc;
/* enable device (incl. PCI PM wakeup), and bus-mastering */
- if (!eth_dev->pci_dev->mem_resource[0].addr) {
+ if (!pci_dev->mem_resource[0].addr) {
RTE_LOG(ERR, PMD,
"Cannot find PCI device base address, aborting\n");
rc = -ENODEV;
@@ -1021,9 +1024,9 @@ static int bnxt_init_board(struct rte_eth_dev *eth_dev)
}
bp->eth_dev = eth_dev;
- bp->pdev = eth_dev->pci_dev;
+ bp->pdev = pci_dev;
- bp->bar0 = (void *)eth_dev->pci_dev->mem_resource[0].addr;
+ bp->bar0 = (void *)pci_dev->mem_resource[0].addr;
if (!bp->bar0) {
RTE_LOG(ERR, PMD, "Cannot map device registers, aborting\n");
rc = -ENOMEM;
@@ -1043,6 +1046,7 @@ static int bnxt_init_board(struct rte_eth_dev *eth_dev)
static int
bnxt_dev_init(struct rte_eth_dev *eth_dev)
{
+ struct rte_pci_device *pci_dev = eth_dev->pci_dev;
static int version_printed;
struct bnxt *bp;
int rc;
@@ -1050,10 +1054,10 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
if (version_printed++ == 0)
RTE_LOG(INFO, PMD, "%s", bnxt_version);
- rte_eth_copy_pci_info(eth_dev, eth_dev->pci_dev);
+ rte_eth_copy_pci_info(eth_dev, pci_dev);
bp = eth_dev->data->dev_private;
- if (bnxt_vf_pciid(eth_dev->pci_dev->id.device_id))
+ if (bnxt_vf_pciid(pci_dev->id.device_id))
bp->flags |= BNXT_FLAG_VF;
rc = bnxt_init_board(eth_dev);
@@ -1121,8 +1125,8 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
RTE_LOG(INFO, PMD,
DRV_MODULE_NAME " found at mem %" PRIx64 ", node addr %pM\n",
- eth_dev->pci_dev->mem_resource[0].phys_addr,
- eth_dev->pci_dev->mem_resource[0].addr);
+ pci_dev->mem_resource[0].phys_addr,
+ pci_dev->mem_resource[0].addr);
bp->dev_stopped = 0;
diff --git a/drivers/net/bnxt/bnxt_ring.c b/drivers/net/bnxt/bnxt_ring.c
index 3f81ffcc..0fafa13f 100644
--- a/drivers/net/bnxt/bnxt_ring.c
+++ b/drivers/net/bnxt/bnxt_ring.c
@@ -209,6 +209,7 @@ int bnxt_alloc_rings(struct bnxt *bp, uint16_t qidx,
*/
int bnxt_alloc_hwrm_rings(struct bnxt *bp)
{
+ struct rte_pci_device *pci_dev = bp->pdev;
unsigned int i;
int rc = 0;
@@ -222,8 +223,7 @@ int bnxt_alloc_hwrm_rings(struct bnxt *bp)
0, HWRM_NA_SIGNATURE);
if (rc)
goto err_out;
- cpr->cp_doorbell =
- (char *)bp->eth_dev->pci_dev->mem_resource[2].addr;
+ cpr->cp_doorbell = pci_dev->mem_resource[2].addr;
B_CP_DIS_DB(cpr, cpr->cp_raw_cons);
bp->grp_info[0].cp_fw_ring_id = cp_ring->fw_ring_id;
}
@@ -242,8 +242,7 @@ int bnxt_alloc_hwrm_rings(struct bnxt *bp)
idx, HWRM_NA_SIGNATURE);
if (rc)
goto err_out;
- cpr->cp_doorbell =
- (char *)bp->eth_dev->pci_dev->mem_resource[2].addr +
+ cpr->cp_doorbell = (char *)pci_dev->mem_resource[2].addr +
idx * 0x80;
bp->grp_info[idx].cp_fw_ring_id = cp_ring->fw_ring_id;
B_CP_DIS_DB(cpr, cpr->cp_raw_cons);
@@ -255,8 +254,7 @@ int bnxt_alloc_hwrm_rings(struct bnxt *bp)
if (rc)
goto err_out;
rxr->rx_prod = 0;
- rxr->rx_doorbell =
- (char *)bp->eth_dev->pci_dev->mem_resource[2].addr +
+ rxr->rx_doorbell = (char *)pci_dev->mem_resource[2].addr +
idx * 0x80;
bp->grp_info[idx].rx_fw_ring_id = ring->fw_ring_id;
B_RX_DB(rxr->rx_doorbell, rxr->rx_prod);
@@ -283,8 +281,7 @@ int bnxt_alloc_hwrm_rings(struct bnxt *bp)
if (rc)
goto err_out;
- cpr->cp_doorbell =
- (char *)bp->eth_dev->pci_dev->mem_resource[2].addr +
+ cpr->cp_doorbell = (char *)pci_dev->mem_resource[2].addr +
idx * 0x80;
bp->grp_info[idx].cp_fw_ring_id = cp_ring->fw_ring_id;
B_CP_DIS_DB(cpr, cpr->cp_raw_cons);
@@ -296,8 +293,7 @@ int bnxt_alloc_hwrm_rings(struct bnxt *bp)
if (rc)
goto err_out;
- txr->tx_doorbell =
- (char *)bp->eth_dev->pci_dev->mem_resource[2].addr +
+ txr->tx_doorbell = (char *)pci_dev->mem_resource[2].addr +
idx * 0x80;
}
--
2.11.0
next prev parent reply other threads:[~2016-12-19 22:00 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-19 21:59 [dpdk-dev] [RFC v2 00/13] Generalize rte_eth_dev model Stephen Hemminger
2016-12-19 21:59 ` [dpdk-dev] [PATCH 01/13] ethdev: increase length ethernet device internal name Stephen Hemminger
2016-12-20 6:53 ` Shreyansh Jain
2016-12-20 17:14 ` Stephen Hemminger
2016-12-19 21:59 ` [dpdk-dev] [PATCH 02/13] rte_device: make driver pointer const Stephen Hemminger
2016-12-20 11:14 ` Jan Blunck
2016-12-19 21:59 ` [dpdk-dev] [PATCH 03/13] eal: define container_of macro Stephen Hemminger
2016-12-19 21:59 ` [dpdk-dev] [PATCH 04/13] eal: introduce driver type Stephen Hemminger
2016-12-20 7:16 ` Shreyansh Jain
2016-12-20 17:16 ` Stephen Hemminger
2016-12-20 13:00 ` Jan Blunck
2016-12-20 17:09 ` Stephen Hemminger
2016-12-20 13:04 ` Ferruh Yigit
2016-12-19 21:59 ` [dpdk-dev] [PATCH 05/13] pmd: remove useless reset of dev_info->dev_pci Stephen Hemminger
2016-12-20 11:16 ` Jan Blunck
2016-12-19 21:59 ` [dpdk-dev] [PATCH 06/13] ethdev: make dev_info generic (not just PCI) Stephen Hemminger
2016-12-20 11:20 ` Jan Blunck
2016-12-19 21:59 ` [dpdk-dev] [PATCH 07/13] e1000: localize mapping from eth_dev to pci Stephen Hemminger
2016-12-19 21:59 ` [dpdk-dev] [PATCH 08/13] ixgbe: localize mapping from eth_dev to pci_device Stephen Hemminger
2016-12-19 21:59 ` [dpdk-dev] [PATCH 09/13] i40e: localize mapping of eth_dev to pci Stephen Hemminger
2016-12-19 21:59 ` [dpdk-dev] [PATCH 10/13] virtio: localize mapping from rte_eth " Stephen Hemminger
2016-12-19 21:59 ` Stephen Hemminger [this message]
2016-12-19 21:59 ` [dpdk-dev] [PATCH 12/13] ethdev: change pci_dev to generic device Stephen Hemminger
2016-12-19 21:59 ` [dpdk-dev] [PATCH 13/13] hyperv: VMBUS support infrastucture Stephen Hemminger
2016-12-20 12:48 ` [dpdk-dev] [RFC v2 00/13] Generalize rte_eth_dev model Jan Blunck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161219215944.17226-12-sthemmin@microsoft.com \
--to=stephen@networkplumber.org \
--cc=dev@dpdk.org \
--cc=sthemmin@microsoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).